This decimal currency converter was produced about 1966 when the Australian currency was changed from the imperial system to the decimal system. It has been used by a Warrnambool businessman, Alan Lane to promote one of his businesses, Lane’s Motors and would have been given to business clients. Alan Lane (d.1995) was prominent in Warrnambool as a businessman man, community leader and philanthropist. His businesses included a bus company, a taxi company and a travel agency. His community services included involvement in the St. John Ambulance Brigade, the Rotary Club, the local Football League, the Warrnambool Art Gallery, the Performing Arts Centre, the Warrnambool Chamber of Commerce and the Warrnambool Council. The A.L. Lane Foundation was established with funds from his estate and continues to assist local projects and charitable causes. This item is of interest as a memento of the time when the Australian currency was converted to the decimal system and as a memento of the prominent Warrnambool community worker, Alan Lane. This is a card consisting of four circles of paper of different sizes joined in the centre with a metal clip. The smallest central piece of paper has advertising material and the other three pieces have red and black numbers, some of decimal currency notations and some of imperial currency notationsDecimal Currency Computer Instructions for Use See Back Lane’s Motors alan l. lane, warrnambool, a.l. lane foundation

Silver coloured metal Fife, oval metal embossed label on side "Regd. Donated to the Sandhurst Drummers by the apex Club. (see - 8005-7d) Blue Velvet bag made to order. Donated by Carol Holsworth, from the Estate of Charlie Nelson, late of 29 Grace Street, White Hills. 7.3.2003musical instruments, wind, fife

A ring called the hoop is used to attach the head to the shell, and the tuning bolts are tightened to tighten the head. The hoop is supported by the lug, and the hoop and lug are attached using a tuning bolt. Long ago, animal skins were used as drum heads, but now drum heads are primarily made of plastic. Basically, when the tension on the head is higher, the tone is higher, and when the tension is lower, the tone is lower.A Cylinder made of metal and wood 37 centimetres diameter and 21 centimetres high. It has a red, black and white wooden trim on the top and bottom and is held together with six metal clamps. There is a drum head on the top and bottom of the cylinder. Ever Play Extra brand is on the top drum head.Lowe musical instruments, drum, sandhurst drummers

A ring called the hoop is used to attach the head to the shell, and the tuning bolts are tightened to tighten the head. The hoop is supported by the lug, and the hoop and lug are attached using a tuning bolt. Long ago, animal skins were used as drum heads, but now drum heads are primarily made of plastic. Basically, when the tension on the head is higher, the tone is higher, and when the tension is lower, the tone is lower. A Cylinder made of chrome plated metal 37 centimetres diameter and 32 centimetres high. There is a drum head on the top and bottom of the cylinder. ARLTON DALLAS-LONDON brand is on the side of the cylinder. It's in a canvas carry bag. On canvas bag - S.N. QUIN B. H. P. D. musical instruments, drum, sandhurst drummers

The clock parts were discovered in 1980 by Julie Wilkins, a Victorian scuba diver who had already experienced more than 500 dives in Australia and overseas. She was holidaying in Peterborough, Victoria, and looking forward to discovering more about the famous Loch Ard ship, wrecked in June 1878 at Mutton Bird Island. The fast Glasgow-built clipper ship was only five years old when the tragedy occurred. There were 54 people on board the vessel and only two survived Julie's holiday photograph of Boat Bay reminds her of her most memorable dive. Submerged in the calm, flat sea, she was carefully scanning around the remains of the old wreck when, to her amazement, a gold coin and a small gold cross suddenly came up towards her. She excitedly cupped them in her hands and then stowed the treasures safely in her wetsuit and continued her dive. She soon discovered a group of brass carriage clock parts and some bottles of champagne. It was a day full of surprises. The items were easily recognisable, without any build-up of encrustations or concretion. Julie secretly enjoyed her treasures for twenty-four years then packed them up for the early morning train trip to Warrnambool. After a short walk to Flagstaff Hill Maritime Museum and Village, her photograph was taken as she handed over her precious find. She told her story to a local newspaper reporter, lunched a café in town then took the late afternoon train home. Her generous donation is now part of a vast collection of Loch Ard shipwreck artefacts, including the gold watch and the Minton Majolica model peacock. This group of brass clockwork parts is incomplete. The pieces were in the ocean for over 100 years before Julie recovered them from the Loch Ard wreck. Their size would suit the works of a carriage clock, with a mainspring and weight to power the clock movement, a pendulum to measure the clock's speed, arbours, posts, pillars and at least one other plate. They would have been mounted inside a protective case with a small door to easily access the clock face for setting the time and accessing the key's winding hole. The clock cases were usually made from decorative gilt brass with a glass front and a carrying handle. The parts include a weighted second hand with a decorative four-pronged finish at one end, a rounded weight at the other, and a hole for attaching it to the clock face. The gear teeth profiles are ‘cycloidal’, an arch shape with vertical sides, which is common for antique clocks. Modern clockworks have ‘involute’ teeth with sloping sides and a squared-off top. The brass carriage clock parts are an example of a mechanical clock produced in the 1870s. The clock's design is a part of the chain of technological improvements in methods for timekeeping. Its cycloidal gear teeth were the forerunner of the more modern involute gears. The group of clock parts includes a weighted hand or arm for signifying the seconds. This feature was uncommon in portable Victorian-era clocks. The clock parts are also significant for their association with the ill-fated sailing ship Loch Ard, wrecked in 1878. The travelling clock or officer’s clock may have been part of the cargo destined for the 1880 Melbourne Exhibition, or the personal possession of one of the people on board the vessel. Brass clockwork parts from a mechanical clock, sixteen pieces. Parts comprise a plate, large gears or wheels, small pinions or wheels with fine teeth, wheels with cogs, and a weighted second hand. The parts were from a carriage clock ca. 1878. They were recovered from the wreck of the sailing ship Loch Ard.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, loch ard, wreck of the loch ard, 1878, mutton bird island, peterborough, scuba diver, 1980s, shipwreck artefact, relic, clock, mechanical, clock parts, time, timekeeper, horology, chronometry, cogs, time keeping device, scientific instrument, chronometer, john harrison, longitude, carriage clock, coach clock, portable clock, travelling clock, travel clock, traveller’s clock, officer’s clock, weighted second hand, victorian era, cycloidal gear teeth, brass clock, julie wilkins

Full size violin, timber construction, varnished. Finger board has inlaid decoration and the body has painted decoration on the front, back and sides. Decorative wooden beading around the edges is visible.

There were at least three 1880s vessels named Lady Loch, all built in Victoria; a river launch (ca 1884 to ca 1916, originally named Lady of the Lake), a steamer ferry (1884 to 1920s), and a government lighthouse tender steamer HMV Lady Loch (1886 to 1962). The spring balance scale was part of the equipment on the HMV Lady Loch. The scale was made by the renowned company Salter Weighing Machines in the United Kingdom, to Silvester's patent design. Salter Weighing Machines, Britain, began making spring scales in the 1820s. In 1908 Salter opened up an Australian branch named Salter Scales Pty. Ltd. The scale is marked HMV SS Lady Loch. It would be suspended by its top ring, a basket or other container is hung from the hook, and the items inside the basket are then pulled downwards on the hook, which stretches the springs inside the works. The pulling action moves a rack and gears a calculated distance and the gears turn the pointer on the dial to indicate the weight of the goods. This scale measures up to 200 pounds capacity. The HMV SS Lady Loch was an iron steamship built in Footscray, Melbourne, by Campbell, Sloss and McCain in 1886 for the colonial Victorian government’s Department of Trade and Customs. It was armed with a 6-inch gun and two 1-inch Nordenfelt guns. The Sydney Morning Herald of 27th January 1888 describes the vessel in detail. It even comments on the interior of the Saloon “The wood work … is on a very elaborate scale and is exceedingly neat …”. The HMV Lady Loch performed Customs duties and serviced the lighthouses along the coast. The scale could have measured goods for the Customs Tax, or for measuring out supplies for the lighthouse keepers. The vessel was named after Lady Elizabeth Loch, wife of Sir Henry Loch, Governor of Victoria from 1884 to 1889. In 1932 Lady Loch was converted to a hulk and used in Brisbane, and finally scuttled in 1962 at Moreton Bay, Queensland.The scale has importance due to its connection to the 1886 HMV Lady Loch, a vessel of great significance to Melbourne’s shipbuilding industry. It was the largest auxiliary vessel in the Victorian Colonial Government’s fleet and the first prominent vessel launched by Melbourne’s shipbuilding industry. The scale is also important for its connection with the colonial navy's Custom's work, as the scale was available to weigh goods that could attract taxes and deal out goods for distribution to lighthouse keepers. The HMV Lady Loch was also important part of Victoria's maritime history for its communication and support of the lighthouse keeper's along the coast of Victoria.Scale; Salter's spring balance mechanical hanging scale, brass and iron. Equally spaced marks around the circular dial have values from 0 to 200 in increments of 10, each increment is also divided into 10. An iron ring is attached to a fitted loop on the top of the scale, and an iron hook is attached to the fitted loop onthe bottom of the scale. A moving pointer attached to the centre of the dial has a calibration screw joined to its base. Four screws fix the brass face to the works at the back. There are stamped and embossed inscriptions. Made by Salter in Britain, to Silvester's Patent design. The scale was once equipment carried abourd the steamship HMV SS Lady Loch. Stamped: "SALTER'S / SPRING BALANCE" "SILVESTOR'S / PATENT" Embossed in script: "HMV SS / Lady Loch"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, scale, salter, spring balance, silvester's patent, lady loch, steamship, hmv, colonial navy, victoria, lady elizabeth loch, custom's vessel, lighthouse tender, 1886, government vessel, victorian government, measuring instrument, weight, weighing instrument, mechanical scale, hanging scale, hmv lady loch, weights and measures, silvestor's patent, george salter & co.

8th Boe AFA the eight Battalion were among the first infantry units raised for the AIF during the 1st WW.Reynolds and Company Eb Cavalry Trumpet.On the flare of the trumpet the wording "Reynolds & Co. Challenge - A. P. Sykes Melbourne. Presented by Myer Emporium Ltd to 8th Boe AFA Melbourne Centenary Celebrations. 1931. surrounded by branches and foliage.

Pentax AP-201 Automatic optical dumpy level without stand. In orange carrying case with strap. Used for teaching ArboriculturePentax AP-201. PENTAX 229410. Made in Chinaarboriculture, teaching, levelling, auto level

Found in the Curator's CottageBrass Troughton & Simms, London optical dumpy level on compass base. Made for Kilpatrick & Co, Melbourne. See B91.126 for photograph of student using it Circa1968.Troughton & Sims LONDON Kilpatrick & Co Melbourne No. 702surveying equipment, students, landscaping

The slide rule was used for less accurate quick mathematical calculations. It was light weight and easy to use in the field. This slide rule was used by members of 4 Fd Svy Sqn circa 1960 for quick Survey calculations..1 12 Inch Slide Rule, multi-function Calculator .2 Protective box and carry case for Slide Rule. Green cardboard box.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr, 4 fd svy sqn

Since the mid-1600s, barometers have been a useful tool for boaters to measure air pressure in order to predict weather changes out on the sea. A change in pressure causes the dial's indicator hand to move. Aneroid barometers have a circular display face much like a clock that indicates the current atmospheric pressure. Part of a collection of objects belonging to Robert Hodgson. He was a fisherman and part of Shore Line Engineering.A circular white round face with black numbers around the edge starting at 80 and going up in 1 number increments to 106. Language is in Russian. A thermometer is on the face of the lower half starting at -10 degrees Celsius and up to 40 degrees Celsius going up in 10 number increments. A glass panelsits above the whit face and it is held together by a metal edge. The back of the barometer is black bakelite.

The violin is an example of a stringed musical instrument used from the fifteenth century for entertainment and pleasure in homes and public performances. Over time, the design has been developed and refined. Violin, Bow and Case. The violin has no markings, and it only has two strings. The wooden case is painted black and has a metal handle. It is lined with green felt and patterned paper. The bow is wooden and fully stringed, with a mother pearl decoration on the frog and a black cloth tape pad. Accessories include Tailpiece, Tuning Peg, four empty packets labelled "Kubelik" strings, four pieces of Resin, a resin wrapper and a silver bar with threaded screw T piece.On paper packets: "Kubelik" flagstaff hill, warrnambool, flagstaff-hill-maritime-village, musical instrument, flagstaff hill maritime museum, maritime museum, maritime village, flagstaff hill maritime museum and village, violin, violin case, violin accessories, leisure, entertainment, stringed instrument

Violin bow; long, rounded wooden stick, with tapered end. A shaped section, the Frog, is joined on below the wide end. The Frog is decorated with mother of pearl. A screw is inserted into the base, used for tightening the strings.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, violin bow, musical instrument

Store Ref. No. 6B/135 No 362/40

The company that made this piano was founded in 1728 by Burkat Shudi, a Swiss harpsichord maker. John Broadwood, a joiner and cabinetmaker, worked for Shudi and eventually married his daughter and became a partner in the firm. Broadwood continued in this business after Shudi died in 1773. John's son James also worked for the firm and in 1795 they became John Broadwood & Son, then when a third son joined as partner in 1808 they become John Broadwood & Sons Ltd. and the name has continued on even now. Pianos manufactured by John Broadwood are of world renown.This piano is significant as a historical musical instrument. It is an example of the type of instruments used for entertainment and worship from the mid-19th to early-20th century. Piano, cottage upright, wooden casing in dark wood with a rich grain. The piano features a pair of brass candlesticks, a music holder and a fitted lock on the keyboard cover. Decorative design etched in panel between candlesticks, Maker's name is in fancy lettering behind the keyboard. Made by John Broadwood and Sons, London. Painted in fancy text "John Broadwood & Sons/ / London"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, piano, upright, candlestick holder, john broadwood & sons london, musical instrument, upright cottage piano, antique piano, victorian entertainment

A.M Astro Compass MKII 6.A/1174 2 x

BRASS BI-OPTICAL MICROSCOPE MOUNTED ON WOODEN STANDlocal history, instruments, optical, instruments, optical

The Mark II Pilot Balloon Slide Rule was made of wood laminated with heavy white plastic with a length of 24.5-in. and width of 2.5 inches. Mark II rules were manufactured in Australia by W & G (Melbourne). The W & G rule differs only slightly from the English A. G. Thornton LTD rule. The W & G rule uses serif fonts and has some fiducial marks that the English rule lacks. Exact dates of production are not known but the MK II is known to have started production by 1927. The printed scales are engraved in the plastic faces. The slide rule has 4 captive cursors (glass windows and brass guides) that ride in slots on the top and bottom edges. Each can be moved independently of one another. The cursors are missing from this item. Brass knobs at both ends of the slide facilitate its movement. The case is fabric covered wood with felt lining. No known history for this item as located in a property after purchase. The Pilot Balloon slide rule is used to convert the observed azimuth and elevation readings into wind velocity and direction records. The use of slide rules was abandoned with the wide spread adoption of computers and programs to do the calculations, as well as the decline in the use of optical pilot balloon theodolites.Made in Australia by White & Gillespie (Melb) Pty Ltd. Established in 1910, the firm was involved mainly in printing plate manufacture, but during the Second World War it manufactured a variety of navigational aids and range finding devices for the military. About 250,000 instruments were made during that period. After the war the company produced, among other items, drawing instruments and slide rules. The long narrow case is fabric covered wood with felt fabric lining containing a long black laminate ruler with numerous white markings and numbers. Top of the ruler is in three sections with the centre section movable by small gold metal knobs at either end. This slide rule contains a engraved notation on the rear face "IMPORTANT. NORMALLY NUMBER OF GRATICULE SCALE DIVISIONS PER RADIAN (K) X LENGTH OF TAIL IN FEET (I) = 12X 105. IN OTHER CASES MULTIPLY GRATICULE READINGS BY 1.2/KI BEFORE CALCULATION ON RULE" Top of Slide Rule - RAAF Ident No G268/480 Serial WG/22pilot balloon slide rule, raaf

The Universal Stereoscope was used to view overlapping stereo aerial photography in three dimensions (3D). It consists of magnifying lenses, an optical train including glass prisms and mirrors that are protected by sliding metal covers all suspended on a pair of fold out adjustable legs. The stereoscope is coloured military olive drab green. This Universal Stereoscope was produced in Australia in 1940 for Military use. It was originally produced with a timber protecting carry box that is missing. It was used extensively by members of the Australian Survey Corps during WWII in many theatres of War for viewing and annotating aerial photography. Item 6205.6P, photograph 6205.1P shows the Universal Stereoscope in use by the Australian Survey Corps annotating aerial photography.The Universal Stereoscope was used to view overlapping stereo aerial photography in three dimensions (3D). It consists of magnifying lenses, an optical train including glass prisms and mirrors that are protected by sliding metal covers all suspended on a pair of fold out adjustable legs. The stereoscope is coloured military olive drab green."DC-1940 Serial No 550", "D V D", "Made in Australia" Plate on the underside reads " This stereoscope was donated to the Ex Fortuna Survey Association by the Eaglehawk Recycle Shop February 2015"royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

A very accurate microscope for measuring cartographic line-weights (thickness) during the Mapping process. Could be used to measure positive or negative line-weights or scribed lines in imperial measurements. Used at the Army Survey Regiment during the manual production of maps or charts.Silver alloy protecting Tube 5.5cms diameter and 12cms in height containing a Cartographic Microscope with imperial measurements. The Microscope is capable of 20 to 40 times magnification.Manufactured by "HENSOLDT WETZLAR" Serial Number 63024royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr