A hacksaw is a fine-toothed saw, originally and principally for cutting metal. They can also cut various other materials, such as plastic and wood; for example, plumbers and electricians often cut plastic pipe and plastic conduit with them. On hacksaws, as with most frame saws, the blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke. In normal use, cutting vertically downwards with work held in a bench vice, hacksaw blades should be set to be facing forwards. A steel hacksaw with a wooden handle but without blade

A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentry. It is widely used to cut mouldings to create coped rather than miter joints. It is occasionally used to create fretwork though it is not able to match a fretsaw in intricacy of cut, particularly in thin materials. Coping saw blades are always thicker and much coarser cutting than typical fretsaw blades. A coping saw consists of a thin, hardened steel blade, stretched between the ends of a square, c-shaped, springy-iron frame to which a handle is attached. The blade is easily removed from the frame so that the blade can be passed through a drilled hole in the middle of a piece of wood. The frame is then re-attached to the blade and the cut starts from the middle of the piece. Long cuts perpendicular to the edge of the material are possible but the shallow depth of the frame rather limits how far from the edge one may cut. The much deeper frame of the fretsaw is more useful for cutting well away from the edge but conversely cannot manage the thicker materials commonly cut by the coping saws. The coping saw blade is installed with the teeth pointing towards the handle. Unlike a hacksaw, which has the teeth pointed away from the handle, the coping saw cuts on the pull stroke. The coping saw blade is removable by partially unscrewing the handle. The blade is prevented from rotating by means of the short, steady bar provided where the blade is attached. Loosening the handle also allows the blade to be rotated relative to the frame as desired. Carefully aligning the finger steady bars at the top and bottom of the blade ensures that the thin blade is straight and not twisted along its length. Re-tightening the handle tensions the blade and locks it at the desired angle relative to the frame. The short steady bar nearest the handle is held securely between finger and thumb while the handle is tightened to ensure the blade remains at the desired angle. Unlike the fretsaw the coping saw blade has holding pins which lock securely into the angled slots of the rotatable blade holders. Gentle curves are achieved by slowly turning the whole frame by means of the handle while continuing to cut steadily. A coping saw with wooden handle but no bladetools, saws, steel , clamps, metalwork, woodwork, carpentry, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham, fretsaw, coping saw, bowsaw, blacksmiths,

A hammer is a tool consisting of a weighted "head" fixed to a long handle that is swung to deliver an impact to a small area of an object. This is a small sledgehammer whose relatively light weight and short handle allow single-handed use. It is useful for light demolition work, driving masonry nails, and for use with a steel chisel when cutting stone or metal. Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This hammer is typical of the type used by early settlers in Moorabbin Shire c1900This is a small sledge hammer with a wood handle and double sided round metal headearly settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

A spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. Spokeshaves can be made from flat-bottom, concave, or convex soles, depending on the type of job to be performed. They can include one or more sharpened notches along which the wooden shaft is pulled in order to shave it down to the proper diameter. Historically, spokeshave blades were made of metal, and the body and handles were wood. Unlike a drawknife, but like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. By the twentieth-century metal handles and detachable blades had become the most common. A convex, wooden, variant of the spokeshave is called a travisher; at one time mostly used in chairmaking.A tool of the cooper and other woodworking tradesmen that has been in use since the making of barrels and wooden buckets for hundreds of years without much change to the design or how the tool is used.Spokeshave, with two wooden handles on either side. Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers tools, spokeshave, barrel making, wood plane, wagon making, joiners tools, carpenter tools

A Croze is a tool used by a cooper for cutting a groove of a barrel, cask, etc., into which the edge of both the heads of a barrel fits. The cooper uses a Croze to cut a groove into either end of the inside of the staves of the bucket or barrel so the lid or bottom would fit securely against the wood. The cooper had to make sure the pieces of wood fit tightly together so none of the contents, such as beer, milk or grain, would not seep out.A tool of the cooper that is specific to his trade, this wood grooving plane has been in use since the making of barrels and wooden buckets for hundreds of years without much change to the design or how the tool is used.Coopers adjustable Croze, Noneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, croze, coopers tools, barrel making

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc.Draw knife with metal blade and two wooden handlesMarkings on blade unreadable flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A Croze is a tool used by a cooper for cutting a groove of a barrel, cask, etc., into which the edge of the head or bottom fits. The cooper uses a Croze to cut a groove into either end of the inside of the staves of the bucket or barrel so the lid or bottom would fit securely against the wood. The cooper had to make sure the pieces of wood fit tightly together so none of the contents, such as beer, milk or grain, would seep out.A tool of the cooper that has been in use since the making of barrels and wooden buckets. Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Coopers Croze wood with metal bladeNoneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, croze, cooper, barrel making, tool

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal curved blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw Knife bent blade, metal with two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

Power-driven, metal-cast woodworking tools such as this lathe were produced in Melbourne during the 1930’s by Royston Siddons. The lathe is designed to hold and rotate wood, which is shaped into circular, cylindrical or moulded forms using changeable cutting tools. Long lathes, such as this one, were used to turn verandah posts. The metal base supports a headstock (far end), tailstock (right) and moveable tool rest. The fixed headstock comprises cone pulleys, a spindle and chuck with spur centre to grip the wood. The adjustable tailstock will hold wood at the required distance, with additional central support for long pieces. The tool rest can be moved along the bed to the required position.Long steel lathe with black metallathe, steel, hand operated, machine operated

Used for straight cutting along the grain of thick timber, rip saws were typically 24 to 28 inches long with 3 to 6 points (ripsaw teeth) per inch along the length of the steel blade. The saw’s closed timber handle is positioned above the heel of the saw and the blade tapers along its length to a narrow toe. The cut made by the saw, the ‘kerf’ is wider than the thickness of the blade as the bent teeth take out small pieces of wood, or sawdust. The kangaroo brass stamp indicates the saw originated from Robert Sorby and sons’ Kangaroo Works, in Sheffield, UK. The kangaroo brand emerged in the early 1800’s and was used extensively until the 1980’s.Tapered steel blade with corrugations and scalloping on cutting edge, affixed to a sturdy wooden handle by brass rivets. Some surface rust and borer holes.KANGAROO [on plaque on handle]rip saw, woodworkers tools, churchill island, amess barn

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.Steel. Designed with bow in middle of blade. Small offset. Original ends in good conditions. No handles.churchill island, crosscut, saw, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.one end original minus handle. Other end has replaced handle. Steelchurchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, increasing efficiency.double ended steel saw with "M" patterned teeth. Handles missing. All rivets in placechurchill island, crosscut, saw, tools, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.single handed cross-cut saw. Peg grip missing?circular brass manufacturer's plate: SPEAR & JACKSON Sheffield. Crown symbol.churchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” steel blade, wooden handle and peg grip. Single person sawcrosscut, saw, churchill island, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Two handled cross cut saw. One manufactured handle and one bush replacement wedged with three inch nail. 6 broken teeth. Rivets for handle broken off at home-made end. M shaped tooth profile.churchill island, crosscut, saw, tool

Artwork. Norman Penrose collection: a drawing of two deer, enlarged from a wood-cut. 'A General History of Quadrupeds.' 1790 printed under the drawing of the deer. Drawing is 7.5cmH x 13cmW on a larger piece of cardboard. Cutting of 7 Australian Butterflies. Coloured picture of furniture, a child's toy and a colourful advertisement of showcard and ticket writing. Also another cutting of Danger Days.drawing, wood-cut, norman penrose collection, artwork, butterflies, ticket writing