Angled blade. Elm? Steel blade. Shaped top of wedge. Circle may be what's left of trade mark. Part of a set. Paint spots. plane, moulding plane, hand tools, carpenter's tools

A Spokeshave is an ancient woodworking tool, used to shape items by gradually shaving back the wood. Originally made from stone, they evolved to have wooden handles with a steel blade, and the type varied depending on its purpose. It could be used for wheel spokes, chair legs, paddles, bows, or arrows, and was an essential tool for farming and homesteads. More modern examples are now made entirely of metal.Cylindrical length of wood, with tapered handles at each end. The centre section has a steel insert with a brass guard strip, and there is a small crack on woodwork.spoke shave, woodwork, hand tools

This mallet is handmade simply from a red gum block and dowel handle. It is complete and has been repaired with screws. Mallets were used to drive timber pieces together without damaging the work.Wooden mallet, with a long dowel length of wood for the handle, attached to a unshaped block of redgum as the head. Small paint stains, and two screws affixed in either end of the handle. mallet, hand tools, churchill island, redgum

This mallet is of a basic construction. It is a rough shaped head which has been reinforced with rivets. The handle is slim in relation to the mallet head. Timber mallets were used to knock timber pieces together.Wooden mallet, with a rectangular replacement handle affixed to a large block of wood. Two rusted rivets are affixed through the top of the block, which is missing a chunk from one side. mallet, woodwork, carpenter's tools, churchill island

Panel saw with tapering blade and small corrugations, wooden handle affixed with brass rivets. Borer holes in handle. Surface rust and pitting on steel.DISSTON [on brass plaque on handle]

Cast steel straight edged blade affixed to a walnut handle with brass rivets. NONPARIEL [on plaque] [elephant trade mark on handle and blade] W.T. JACKSON SHEFFIELDtennon saw; churchill island; amess barn

Bronze saw set with steel fittings and red paint on jaw. Meant for smaller sawsEclipse No 77 Made in Englandchurchill island, saw set, eclipse, tool

Incomplete. Bronze saw set with no fittings except striker. Red paint spots.Eclipse No 77. Made in Englandchurchill island, saw set, tools

steel saw set with pliers style handle, and spring.churchill island, tool, saw set

Forged by a blacksmith, Farrier's nippers are used to cut the hoof wall to the correct length for each horse and used to bevel the edge of the hoof before rasping. Blacksmith's made black iron complete. Split end one handle; knob end other handleStamped: "7"farrier, equipment, stable, equine, equine care, churchill island

Steel. Curved blades for cutting straight line on curved surfaces. Rivet rather than screw. Paint mark on one blade.churchill island, tool, tin snip

Straight blades. Damaged end of one handle. Surface rust.churchill island, tool, tin snips

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” steel blade, wooden handle and peg grip. Single person sawcrosscut, saw, churchill island, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Two handled cross cut saw. One manufactured handle and one bush replacement wedged with three inch nail. 6 broken teeth. Rivets for handle broken off at home-made end. M shaped tooth profile.churchill island, crosscut, saw, tool

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe was manufactured by W.A Tyzack & Co. Ltd. Set up by William Tyzack in the early 1800s in Sheffield, United Kingdom, they grew into a larger manufactory specialising in agricultural tools. Adding the ‘Horseman’ brand to their trademark in 1948, they expanded dramatically and exported throughout the Commonwealth.Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Cast steel blade. Hole on back and of blade for hanging. Steamed handle (may not be original). Complex pipe/nut washer and five metal shims keeping blade on handle.From tip: BEST CROWN W.A. TYZACK & CO. LTD STELLA WORKS SHEFFIELD. Near handle: image of figure on horse.churchill island, scythe, wa tyzack, sheffield, machinery

Flat head screwdriver with surface rust, and a black wooden handle; paint worn off handlechurchill island, tool, screwdriver

Set of eight twist drill bits in variety of sizes and diameterschurchill island, tool, drill bit

Set of five rusted counter sink bits, with tapered proximal ends and mushroom-shaped distal sectionschurchill island, tools, countersinking bit

Two centre bits with a central projecting point and two side cutters on the distal ends. Proximal ends are tapered.churchill island, tool, centre bit

Two screw driver bits with a tapered proximal end and a flat head, some paint spots and surface rust evident.BLACKMANS ENGLANDchurchill island, screw driver, bits, tools

Two steel spoon drill bits with a tapered proximal end, and a beveled and distorted distal end. Surface rust and paint spots.NEUMANS GERMANYchurchill island, drill bit, spoon drill bit, tool

Brass octagonal ring spanner with straight handle, and a small hole bored into the end. To go with the Essex car, churchill island, tool, ring spanner

Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Curved blade, painted black. Wooden limb handle, varnished, some white paint spots. Nail into handle in blade holder sleeve. Slight bulge in handle near blade holderchurchill island, fern hook, olinda, mount dandenong, nilma north

Long corkscrew auger, with fused cast iron chuck and eight twists in the steel. Chuck: "2" Auger "16" "IRWIN MADE IN USA" churchill island, auger, tool

This type of wrench was called an adjustable twisted steel monkey wrench and was made around 1900. It was different from ordinary spanners and wrenches by the nature of the jaws being able to adjust to fit an individual nut, bolt or other fitting. The twisted handle wrenches were often forged by handtwist design on handle; jaws bent out of shape and worn. Hand-madechurchill island, tool, adjustable wrench, hand tool

Adjustable Stillson pipe wrench with a spanner and thread. Black finish with small amount of surface rust. churchill island, pipe wrench, stillson, tool

Thin metal spanner, with a curved head and a hook at the end. Badly rusted. Intended for commercial use and as an accompaniment with machinery.churchill island, spanner, tool

Thick cast iron spanner with slightly tapered handle and curved hook end. Marked with notches and drill mark throughout handle. 7/8 [stamped on handle]churchill island, tool, spanner

Metal thread cutter with two handles and an adjustable screw inside the jaw.V [punched] 7/16 Vchurchill island, tool, thread cutter

A Sickle is an agricultural hand tool used for harvesting or reaping grain crops using the sharp blade in a swinging or hacking motion. It was also used for cutting back forage and other plant growth. They have been used since early Iron Age times and many examples have been found in the Middle East dating back 18,000 to 8,000 BC. This is a bagging hook – a type of larger and heavier sickle used mainly for harvesting of grain. It continued to be used after industrialisation and the implementation of the mechanical reaper. Designed by British manufacturing firm, Brades & Co, and made to be used by the left hand, its age is unknown. Left handed sickle. Blade painted black; handle varnished. Metal ferrule on handle. Hook on blade at handle endB?RADE? BRADER OZ?sickle, harvesting, churchill island heritage farm