Small section of single strand barb wire. Wire found at home in Strathfieldsaye, near Bendigo. Wire is high tensile and has a slight kink under the barbs which locks them in position. Item donated by Elaine Swanson, Strathfieldsaye, whose father purchased most of his fencing materials from Abbott Supply, Bendigo. The wire matches the design outlined in Abbott's patent application attached.rural industry, fencing, barbed wire, abbott, farming material, fence wire

Clothing. Cream coloured silk parasol with 40 cm wooden handle with 4 cm diameter gold coloured metal knob at the end. Parasol has silk fabric with ribbed border stretched over eight ribs. Silk twisted cord wound around stick above the handle. Two ends of the cord have 14 cm tassels with 5cm twisted cord with 9 cm velour strands.Paper sticker on ferrule of umbrella, ''G Buongiovana Napoli''costume accessories, female, cream coloured silk parasol

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the grip fid, is used for ply-split braiding. The grip fid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid painted brown, flattened point turned end and hole for a lanyardNoneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlinspike

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the grip fid, is used for ply-split braiding. The grip fid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid painted half green, flattened end with a lanyard holeNoneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlinspike

German peaked cap worn by members of the Waffen SS. Pattern appears to be for officers in WW2 circa 39-45.Green felt hat with silver edges. front of cap has silver eagle carrying a Swaztika. Middle portion is felt, 6 cm wide and emblem of a skull and bones in silver at front. Two strands of silver braided rope attaching to front half from plastic studs at ear points. Peak is hard black plastic and green on inside. Inside lining is black cotton material with brown leather around middle.german uniform, peaked cap, ww2, waffen ss

Coloured slide transparency. Image is of a male standing in profile dressed in costume and dancing. He is wearing a grass skirt, with a beaded and feathered headdress. He has many strands of beads and a lei around his neck. Beads are also on his wrist. Another person is standing in the background, while part of another is in the foreground. On the lower edge of the white border the words Fancy Dress Party Peter Ellis have been handwritten.Kodachrome Transparencyslide, bendigo, bendigo institute of technology

Instructions for installing, operating and maintaining M.L.S. Superheated Steam Pyrometers, Marine and Locomotive Superheaters Ltd , 195 Strand, London wc2. Owner J Badham, 16 Abbott St Bendigo. Small booklet with brown cover in black binding shows picture of Pyrometer on front. On page 1 rubber stamp 'The Superheated Company (Australia ) Ltd Manchester Unity Building, 185 Elizabeth St. Sydney NSW - phone MA 5886'.book, engineering, pyrometers, marine and locomotive superheaters ltd , 195 strand , london wc2 / owner j badham , 16 abbott st bendigo / 'the superheated company (australia ) ltd manchester unity building , 185 elizabeth st. sydney nsw - phone ma 5886

Object. Circular in shape and 22 cms in diameter. The fan has a bamboo handle 26.5 cms long. Long strands of woven cane have been machine stitched into a circular shape, with the outside round in green dyed cane. (twenty rows of woven can make up the fan). A Floral design, 15 cm long is painted on one side of the fan-leaves, petals and centre of flower in green, red, yellow. Markings as above.costume accessories, female, circular cane fan

In the 19thC and early 20thC men often wore their shirts for a week or more. However the collars were detachable so that they could be changed when they became dirty or for special occasions eg Church on Sundays Collar studs were used to attach the collar to the shirt. The cardboard box was used for storage and when travelling. The collars were very stiffly starched so as to maintain their shape. Some have Laundry instructions printed on the inside of the collar.The Maggs family were pioneer settlers in Moorabbin Shire.12 detachable, stiffly starched, white collars, from various manufacturers, for a man's shirt. Each Collar has 3 buttonholes for attaching to the shirt - 2 at the neck and 1 centre back. They have been stored in a cardboard box marked 'Boheco regd. ' The box has no lid.Base of Box : Boheco REG. SNOW-WHITE COLLARS / 1 3/4 / Strand / 16 1/2 / MADE IN / AUSTRALIA ( there is no lid ) under box in pencil ; 16 1/2 x 1 3/4 / 1/- each / c/o = Doz. 1 / 3 eachmenswear, clothing, shirts, collars, early settlers, fashion, cheltenham, moorabbin, dairy farmers, market gardeners, maggs family, pioneers

The book is a bound volume containing the weekly publications of The Graphic, an illustrated newspaper. The volume, No. 23, includes newspapers from January to June 1881. It was published and printed in London, England. WARRNAMBOOL MECHANICS’ INSTITUTE Warrnambool's Mechanics' Institute (or Institution as it was sometimes called) was one of the earliest in Victoria. On 17th October 1853, a meeting was held where it was resolved to request the Lieutenant Governor of the Colony to grant land for the erection of a Mechanics' Institutes building. A committee was formed at the meeting and Richard Osburne chaired the first meeting of this committee. The land on the North West corner of Banyan and Merri Streets was granted but there were no funds to erect the building. The Formal Rights of the Warrnambool Mechanics' Institute's encompassed its aims and these were officially adopted in1859; "This Institution has for its object the diffusion of literary, scientific, and other useful knowledge amongst its members, excluding all controversial subjects, religious or political. These objects are sought to be obtained by means of a circulating library, a reading room, the establishment of classes, debates, and the occasional delivery of lectures on natural and experimental philosophy, mechanics, astronomy, chemistry, natural history, literature, and the useful and ornamental arts, particularly those which have a more immediate reference to the colony." The Warrnambool Mechanics' Institute opened its first reading room in November 1884 in the National School building at the corner of Banyan and Timor Streets. The Institute was funded by member subscription, payable on a quarterly, half-yearly or yearly basis. Samuel Hannaford, the Manager of the Warrnambool Bank of Australasia, was the first Honorary Secretary of the Mechanics' Institutes, and an early President and Vice-President. He also gave several of the early lectures in the Reading Room. Another early Secretary, Librarian and lecturer was Marmaduke Fisher, the teacher at the National School. Lecture topics included The Poets and Poetry of Ireland', 'The Birth and Development of the Earth', 'The Vertebrae - with Remarks on the pleasures resulting from the study of Natural History' and 'Architecture'. In 1856 the Reading Room was moved to James Hider's shop in Timor Street, and by 1864 it was located in the bookshop of Davies and Read. In the 1860's the Mechanics' Institute struggled as membership waned but in 1866, after a series of fundraising efforts, the committee was able to purchase land in Liebig Street, on a site then called Market Square, between the weighbridge and the fire station. A Mechanics' Institute building was opened at this site in August 1871. The following year four more rooms were added to the main Reading Room and in 1873 the Artisan School of Design was incorporated into the Institute. The same year Joseph Archibald established a Museum; however, it deteriorated when he was transferred to Bendigo in 1877. In 1880, with Archibald's return to Warrnambool, the Museum was re-established, and in 1885 a new building was built at the back of the Institute to accommodate the re-created School of Design, the Art Gallery and the Museum. In 1887 the Museum section was moved to the former courthouse in Timor Street (for some time the walls of the building formed part of the TAFE cafeteria but all is now demolished)). In 1911 the Museum was transferred back to the original building and the management of the Mechanics' Institute was handed over to the Warrnambool City Council. The Museum and Art Gallery became one and housed many fine works of art, and the Library continued to grow. The building was well patronised, with records showing that at the beginning of the 20th century there were between 500 and 800 visitors. During World War One the monthly figures were in the thousands, with 3,400 people visiting in January 1915. The Museum was a much - loved Institution in Warrnambool until the contents of the Museum and Art Gallery were removed to make room for the Warrnambool City Council Engineers' Department. The contents were stored but many of the items were scattered or lost. When the original building was demolished the site became occupied by the Civic Centre, which included the new City Library. (The library was temporarily located in the old Palais building in Koroit Street.) In the process of reorganisation the Collection was distributed amongst the community groups: -The new City Library took some of the historical books and some important documents, historic photographs and newspapers. -The Art Gallery kept the 19th Century art collection and some of the artefacts from the museum. -The Historical Society has some items -The State Museum has some items -Some items were destroyed -Flagstaff Hill Maritime Village has old newspapers, Government Gazettes, most of the Mechanics' Institute Library, ledgers and documents connected to the Mechanics' Institute Library, some framed and unframed artworks and some photographs. The Warrnambool Mechanics' Institute Library book collection is deemed to be of great importance because it is one of the few collections in an almost intact state, and many of the books are now very rare and of great value. WARRNAMBOOL PUBLIC LIBRARY The Warrnambool Mechanics’ Institute (WMI) was formed by a voluntary community group in 1863, within six years of Warrnambool’s beginnings, and its Reading Room opened in 1854. The WMI operated until 1963, at which time it was one of the oldest Mechanics’ Institutes in Victoria. Mechanics’ Institutes offered important services to the public including libraries, reading rooms and places to display and store collections of all sorts such as curiosities and local historical relics. In 1886 a Museum and Fine Arts Gallery were added to the WMI and by the beginning of the 20th century, there was also a billiards room and a School of Art. By this time all Mechanics’ Institutes in country Victoria had museums attached. Over the years the Warrnambool Mechanics’ Institute Library was also known as the Warrnambool Public Library the Warrnambool Library and the Free Library. Early funding from the government was for the “Free Library”. The inscription in a book “Science of Man” was for the “Warrnambool Public Library”, donated by Joseph Archibald in 1899. Another inscription in the book “Catalogue of Plants Under Cultivation in the Melbourne Botanic Gardens 1 & 2, 1883” was presented to the “Warrnambool Library” and signed by the author W.R. Guilfoyle. In 1903 the Warrnambool Public Library decided to add a Juvenile Department to library and stock it with hundreds of books suitable for youth. In 1905 the Public Library committee decided to update the collection of books and added 100 new novels plus arrangements for the latest novels to be included as soon as they were available in Victoria. In July 1911 the Warrnambool Council took over the management of the Public Library, Art Gallery, Museum and Mechanics’ Institute and planned to double the size of the then-current building. In 1953, when Mr R. Pattison was Public Librarian, the Warrnambool Public Library’s senior section 10,000 of the 13,000 books were fiction. The children’s section offered an additional 3,400 books. The library had the equivalent of one book per head of population and served around 33 per cent of the reading population. The collection of books was made up of around 60 per cent reference and 40 per cent fiction. The library was lending 400 books per day. In 1963 the Warrnambool City Council allocated the site of the Mechanics’ Institute building, which included the Public Library, Museum and Art Gallery, for the new Municipal Offices and the Collections were dispersed until 1971. The Warrnambool Library took over the Mechanics’ Institute Library’s holdings on behalf of the Warrnambool City Council. Since the closure of the Warrnambool Mechanics’ Institute the exact location and composition of the original WMI books and items have become unclear. Other materials have been added to the collection, including items from Terang MI, Warrnambool Court House and Customs House. Many of the books have been identified as the Pattison Collection, named after the Librarian who catalogued and numbered the books during his time as Warrnambool Public Librarian in the time before the Mechanics’ Institute closed. It seems that when Warrnambool became part of the Corangamite Regional Library some of the books and materials went to its head office in Colac and then back to Warrnambool where they were stored at the Art Gallery for quite some time. Some then went to the Warrnambool Historical Society, some stayed at the Art Gallery and some were moved to Flagstaff Hill Maritime Village. The various stamps and labels on the books held at Flagstaff Hill show the variety of the collection’s distribution and origin. The books in the collection at Flagstaff Hill Maritime Village date from the 1850s to the late 1950s and include rare and valuable volumes. Many of the books are part of the “Pattison Collection” after the Warrnambool’s Public Librarian, Mr R. Pattison. The Pattison Collection, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institute’s collection. The Warrnambool Mechanics’ Institute Collection is primarily significant in its totality, rather than for the individual objects it contains. Its contents are highly representative of the development of Mechanics' Institute libraries across Australia, particularly Victoria. A diversity of publications and themes has been amassed, and these provide clues to our understanding of the nature of and changes in the reading habits of Victorians from the 1850s to the middle of the 20th century. The collection also highlights the Warrnambool community’s commitment to the Mechanics’ Institute, reading, literacy and learning in the regions, and proves that access to knowledge was not impeded by distance. These items help to provide a more complete picture of our community’s ideals and aspirations. The Warrnambool Mechanics Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and the important role it played in the intellectual, cultural and social development of people throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance. The Graphic, an Illustrated Newspaper, Vol 23 Publisher: Edward Joseph Mansfield, at The Strand, London Date: January to June, 1881 The bound book of newspaper editions has a hardcover with a leather spine and brown/orange/blue pattern on the covers. The spine has gold embossed lettering. Inscriptions; sticker on the front end paper from Warrnambool Mechanics Institute and Free Library, and a purple, oval stamp on the fly from Warrnambool Mechanics Institute and Free Library.Embossed in gold on the spine; "THE GRAPHIC", "VOL. XXIII", "JAN. TO JUNE. / 1881" Sticker [identifies the Warrnambool Mechanics Institute and Free Library] Stamp; concentric ovals with "WARRNAMBOOL" "MECHANICS'" "INSTITUTE" flagstaff hil, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, book, pattison collection, warrnambool library, warrnambool mechanics’ institute, ralph eric pattison, corangamite regional library service, warrnambool city librarian, mechanics’ institute library, victorian library board, warrnambool books and records, warrnambool children’s library, the graphic illustrated newspaper vol 23, edward joseph mansfield, the graphic, illustrated newspaper, volume 23

This item is part of the Dodgson Collection, which was bequeathed to Queen's College in 1892 by the Rev. James Dodgson. The collection was created by Aquila Dodgson, brother of James. Aquila Dodgson was a friend of the English Egyptologist Flinders Petrie, and it was through this friendship the Aquila was able to acquire ancient Egyptian artefacts. A detailed study of the collection was made by Christine Elias "Discovering Egypt: Egyptian Antiquities at the University of Melbourne", M.A. thesis 2010.Light green ring beads strung with a number of different bead/amulet types, including a small turquoise multiple wedjat-eye, a light-green single wedjat-eye with a brown pupil, four small light-green circular beads pierced across width, a light-green squat spherical bead, a light-green daisy style bead and a beige barrel-bead with ribbed surface decoration. Small paper label inscribed with 'A5' attached to strand.james dodgson, aquila dodgson, flinders petrie, bead netting, beads, faience

This splicing tool is handmade on a forge. It is used for splicing in fibre and wire rope work to form a semi-permanent joint between two ropes, or parts of the same rope or steel cable. The rope is partly untwisted and then the strands are interwoven. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or to join two ropes together. Splices are preferred to knotted rope; a knot typically can reduce the strength by 20–40%, but a splice is capable of attaining a rope's full strength. This homemade, handmade splicer is an example of a tool used to splice a cable or rope, a craft that was in much need onboard a sailing ship. Splicing tool; a spike on one end and a flat blade on the other, with goose-neck centre for leverage. Handmade.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, splicing tool, rope work, rope strands, knot making, netting, net making, sailmaker's tool

The Shipwreck Board is a feature of Flagstaff Hill Maritime Museum and Village/ its subject is explained briefly in the Museum's handbook, The Flagstaff Hill Navigator, published in 2008: - "Known as the ‘Eye of the Needle’ the treacherous entrance to Bass Strait is littered with the wreckage of large international vessels and smaller sail and steam craft used in coastal trade. The vessels bringing emigrants and cargo to Australia found the western entrance to Bass Strait the most dangerous part of their voyage. They had to thread their way between the southern point of Victoria (Cape Otway) and the northern point of King Island, a stretch of water less than 90 km wide. Many smaller coastal vessels were lost at Portland, Port Fairy, Warrnambool and Apollo Bay which are not safe harbours in certain weather conditions. "The Shipwreck Board shows shipwrecks, strandings and collisions which occurred in this area up to the year 1940. Wrecks are identified by a yellow light and collisions/strandings by a green light. These lights also identify the decade the wreck occurred by lighting up when the relevant decade button is pushed. Interesting happenings of the decades are listed next to the buttons." The Shipwreck Board's demonstration of The Eye of the Needle is an interactive visual display that helps teach the perils and dangers faced by early settlers in Victoria. It tells of the vast number of lives lost. It lists the names of many infamous shipwrecks and significant events.The large stained and lacquered timber board is mounted in a timber, frame. It is painted with a small sketch of Australia, and an enlarged outline of the southern coast of Victoria, King Island and the North West coast of Tasmania. The interactive display highlights the shipwrecks, standings and collisions suffered by many vessels as they navigated the 'Eye of the Needle', a narrow stretch of Bass Strait. The locations of the Lighthouses are pinpointed. Lists of groups of ships are below the coastlines. A painted scroll shows eight major shipwrecks with the number of lives lost for each one. A table shows historical facts associated with the decades from pre-1830 to 1940. A system of coloured lights compares the decades with the vessels that suffered damage. The board was created by artist and signwriter, Alex O'Flynn Computer Signs.flagstaff hill, maritime museum, maritime village, shipwreck coast, eye of the needle, shipwreck locations, bass strait, basses strait, king island, north west tasmania, south coast of victoria, cape otway, victorian lighthouse, king island lighthouse, strandings, coastal tracers, emigrant ships, sea trade, 1930s-1940s, shipwreck board, the eye of the needle, collosions, alex o'flynn, alex o’flynn computer signs, shipwrecks of western victoria

Police uniform peaked cap circa 1939-45. officer Pattern worn during WW2 period.Green police Hat. Top is green felt with bright green lines. Second level black felt around circumference of hat about 5 cm wide. Front peak Dark Green, plastic. Silver Rope Braid - two strands going from one ear around front to other ear. Nazi emblem on front with Swaztika and Eagle. On top small silver button with one dot in the middle. Inside lining is orange material with brown band around middle of rim.Size "55 1/2" Brand "Braunschweig" and some other indecipherable writing. uniform, german police, peaked cap, ww2

Ticket was used in 1931 and kept in storage by a member of the Edina's crew. The SS Edina was the most famous steamer in Australia and underwent a number of changes and refits during its lifetime. It had an unchallenged record of strandings and collisions with other vessels and of escaping serious damage itself. The vessels City of Melbourne, Courier, Manawatu, Excelsior (twice), Hovell, Batman, all suffered. When Edina was retired in 1938 it was the world's oldest working steamer and had travelled more than 1 million km. She was finally broken up by George Seelf on the banks of the Maribyrnong in 1957.The SS Edina was an iconic and affectionately regarded part of Port Phillips maritime history and culture. It is historically significant for being internationally famous as the worlds oldest working screw steamship between 1912 and 1938. Its career was varied and interesting and it is considered significant for its involvement in the Crimean War, US Civil War, NZ gold rushes, and locally for its career as a western district steamship and Bay steamer. The site is archaeologically significant as the only remnant of the hull of the vessel and as part of the Maribyrnong riverine landscape situated amongst the remnants of shipbuilding slipways, Footscray wharves, S781 UnidentifiedClipped and used steamship tickets [the children's tickets are an adult ticket cut in half diagonally] - Melbourne to PortarlingtonAustralian Steamships Pty Ltd, Howard Smith Ltd, managing agentsticket, steam screw vessels, ss edina, port phillip, bay steamers

Items show two different wire terminations - fully wrapped - 7 wires and part wrapped and secured by bending the wire. Shows how the galvanized span wire - 7 strands - can corrode within the insulator and lead to failure if not inspected and replaced. The items were probably erected by the SEC during the mid 1930s and replaced by the BTM 2024. Salvaged from Wendouree Parade during overhead span wire replacement and repair work March 2024 undertaken by the BTM. See also item 9020 for a corroded pole eye bolt.Demonstrates a corroded span wire and a typical egg type insulator.Overhead equipment - two brown egg insulators with associated corroded span wire.overhead, insulators, span wires, btm, tramways

As well as being an activist, Tilly Aston was also a published author and wrote several books during her lifetime. In this scanned image, from The Weekly Times newspaper, she holds her hand to her face and wears a flounced blouse with a multi-strand pearl choker and a heavy bangle which appears from underneath a decorated cuff. Her hair is swept up in a top knot and a large black bow, turned sideways, rests upon her left side. The photograph was printed as part of an article on the 'Principle Prize Winners of Prahran Competitions'.Black and white scanned newspaper imageMiss Tilly Aston (1st original story)tilly aston, weekly times newspaper

Associated with WW1 campaign medals and bravery awards. Items from the Joseph Nott collection WW1 soldier. Joseph Nott was a Military Cross recipient. WW1 colored ribbons associated with campaign medals and bravery awards. The Joseph Nott collection (Chiltern and Rutherglen resident). Medal and Award ribbons associated with WW1 : 1 x bright green with thin red striping (French 1914-1918 Croix de Guerre), 1 x red, cream, white and blue stripes (the 1914 Star), 1 x red and white flag shape cloth patch (2 ANZAC Corps)), and 1 x cream, purple and cream striped ribbon (The Military Cross). The thin ribbon strand consists of cream, crimson and royal blue colored ribbons (Empire colors and the 1914 Star colors). 2 anzac corps colours (light horse unit), joseph nott colleciton ww1 soldier rutherglen and chiltern resident., military cross, croix de guerre and 1914 star ribbons ww1, ww1 medals and awards ribbons

It is thought that natural pearls form under a set of accidental conditions when a microscopic intruder or parasite enters a bivalve mollusc and settles inside the shell. The mollusc, irritated by the intruder, forms a pearl sac of external mantle tissue cells and secretes the calcium carbonate and conchiolin to cover the irritant. This secretion process is repeated many times, thus producing a pearl. Natural pearls come in many shapes, with perfectly round ones being comparatively rare. In general, cultured pearls are less valuable than natural pearls, whereas imitation pearls have almost no value. Cultured freshwater pearls can often be confused for natural pearls Cultured pearls are the response of the shell to a tissue implant. A tiny piece of mantle tissue (called a graft) from a donor shell is transplanted into a recipient shell, causing a pearl sac to form into which the tissue precipitates calcium carbonate. Some imitation pearls (also called shell pearls) are simply made of mother-of-pearl, coral or conch shell A strand of pearls called a princess length, 43 to 48 cm in length, comes down to or just below the collarbone. A graduated strand of pearls most often has at least 3 mm of differentiation from the ends to the centre of the necklace. A lady's pearl necklace and 1 earring in a hinged, lined, cream Bakelite case .jewellery, necklace, earring, pearls, market gardners, early settlers, moorabbin, bentleigh, cheltenham, ormond

Combing removes the short or broken fibres and draws out the long fibres into even strands suitable for spinning. The process is necessary to produce long and soft strands needed for worsted yarn. These machines remove the short fibres and blend the remaining long fibres together to form the top. The short fibres that are removed, known as the noil, are used in the woollen system. The long fibres are drawn together, ready for spinning. To retain as many of the valuable long fibres as possible, a skilled operator always needed to be on duty in the factory to precisely set the machine. A Nobel Comb separates short (Noils) fibres while also blending long (Tops) fibres together. The long fibres are used for worsted materials while the short fibres are used for woollen fabrics. Woollen materials are soft, bulky and fuzzy, such as a picnic blanket; whereas worsted materials are fine, smooth and crisp, such as a suit jacket. The Valley Worsted Mills in Geelong, now the Little Creatures Brewery, ran 12 noble combs up until 1981. Gold plaque on display with machine until 2018 read: G.H. Mitchell & Son, Adelaide have celebrated 125 Years of involvement with the Australian Wool Processing Industry by contributing the funds necessary to restore The Carding Machine, Noble Comb & The Gill Box.Noble Comb with plates - 'Prince Smith & Sons, Burlington Shed, Keishley' (One plate located on each gear box). 'Prince Smith & Sons, Burlington Shed, Keishley' (One plate located on each gear box).wool manufacturing, noble comb, textile industry, geelong, little creatures brewery, valley worsted mills, fibres, wool, factory

These remains of a block, shackle and wire are from the sailing ship Newfield. This would have been one of the hundreds of blocks and shackles used in the rigging of the vessel. The Newfield was a three-masted iron and steel barque, built in Dundee, Scotland, in 1869 by Alexander Stephen and Sons. It was owned by the Newfield Ship Company in 1890 and later that year It was registered in Liverpool to owners Brownells and Co. The Newfield left Sharpness, Scotland, on 28th May 1892 with a crew of 25 under the command of Captain George Scott and on 1st June left Liverpool. She was bound for Brisbane, Australia, with a cargo of 1850 tons of fine rock salt. On the night of 28 August 1892, the Captain mistook the Cape Otway light for that of Cape Wickham (King Island) and altered tack to the north and east putting the vessel on a collision course with the Victorian coast. At around 3:40 am the Newfield struck rocks about 100 yards from shore, and 5 feet of water filled the holds immediately. The captain gave orders to lower the boats which caused a disorganised scramble for safety among the crew. The starboard lifeboat was cleared for lowering with two seamen and two apprentices in her, but almost as soon as she touched the water she was smashed to bits against the side of the vessel, and only one of the four reached safety ashore, able seaman McLeod. The rough sea made the job of launching lifeboats very difficult. The first two lifeboats launched by the crew were smashed against the side of the ship and some men were crushed or swept away. The third lifeboat brought eight men to shore. It capsized when the crew tried to return it to the ship for further rescue The rescue was a difficult operation. The Port Campbell Rocket Crew arrived and fired four rocket lines, none of which connected with the ship. Peter Carmody, a local man, volunteered to swim about one mile offshore to the ship with a line to guide the fourth and final lifeboat safely to shore. He was assisted by James McKenzie and Gerard Irvine. Seventeen men survived the shipwreck but the captain and eight of his crew perished. The Newfield remained upright on the reef with sails set for a considerable time as the wind slowly ripped the canvas to shreds and the sea battered the hull to pieces. The Marine Board inquiry found the wreck was caused by a "one-man style of navigation" and that the Captain had not heeded the advice of his crew. For his heroic efforts, Peter Carmody was awarded the Bramley-Moore medal by the Liverpool Shipwreck and Humane Society for Saving Life at sea on January 21st 1893. The medal and a letter of congratulations were donated to Flagstaff Hill Maritime Museum by Peter Carmody's granddaughter Norma Bracken and her son Stuart Bracken on 25th May 2006. Flagstaff Hill’s collection of artefacts from the Newfield is significant for its association with the shipwreck Newfield, which is listed on the Victorian Heritage Registry. The collection is additionally significant because of the medal awarded to a local man Peter Carmody. The Newfield collection historically also represents aspects of Victoria's shipping history and its association with the shipwreck.This is what remains of a block, shackle and wire from the wreck of the sailing ship “Newfield”. The object is heavily encrusted. The exterior (cheeks) of the block is missing. The disc of the block has a channel part way around its face, about 2 cm from the edge. Two long, narrow plates are joined onto the centre of the disc’s face with a bolt through the centre. The other ends of the two plates join onto the elbow of the shackle. The elbow of the shackle is also joined onto a rod. At the other end of the rod can be seen the ends of thick wire strands.block, 1893, flagstaff hill, flagstaff hill maritime museum, peter carmody, newfield, 1892, port campbell, shipwreck, ship, victorian shipwrecks, barque, ship wreck, peterborough, sailing ship, 29 august 1892, block and shackle, curdies river, bramley-moore medal

Until suction became available in the 1930s, maintenance of a clear airway during oral and nasal surgery relied on posturing of the patient, mopping with sponges or the temporary placement of swabs or throat guards. Removal of surgical debris such as polyps, blood clots or foreign bodies could only be effected by the finger or devices such as probangs. The Probang is inserted blind (perhaps guided by a finger), the main shaft can then be held in the left hand whilst the right hand withdraws the inner tube. This results in a fanning out of the linear strands which are visible proximal to the tip. Held in this position the instrument is withdrawn and is supposed to scoop out the offending mass. Long flexible metal rod covered in gum resin sheath with a ring grip at the proximal end and a smooth metal rounded edge tip for insertion into the airway for clearing of obstructive matter.Stamped onto gum resin sheath: MADE FOR / CARL ZOELLER BRISBANE / GERMANY Stamped onto gum resin sheath in gold leaf: [indecipherable - presumably manufacturer's label]probang, flexible, oral, airway, horsehair, anaesthesia, obstruction, dr sharkey, lidcombe state hospital

Edwin Burston's father was B. J. Burston, conductor of the Bendigo Symphony Orchestra in 1896.The Strand Musical Magazine, Volume III, January to June 1896. The inside front cover has a certificate outlining it was presented to Edwin Burston, at Gravel Hill State School No.1566, for School Choir: First Prize, Astral Competitions, Bendigo May 1897. The book has a grey hardcover with black, red, blue inscriptions and pictures on the cover. The spine has gold and black inscriptions and pictures, and the back cover is blank. The book includes pictures and articles on musical instruments, composers, musicians and sheet music for various pieces. This book is missing pages at the beginning and starts at page 3.music, gravel hill school, astral competition, sheet music, burston family

The Strand Musical Magazine, Volume IV, July to December 1896. The inside front cover has a certificate outlining it was presented to Blanche Hoskins, at Gravel Hill State School No.1566, for School Choir: First Prize, Astral Competitions, Bendigo May 1897. The book has a grey hardcover with black, red, blue inscriptions and pictures on the cover. The spine has gold and black inscriptions and pictures, and the back cover is blank. There is a stamp on the title page - "E. W. Cole, Music Department & Library, Book Arcade". The book includes pictures and articles on musical instruments, composers, musicians and sheet music for various pieces.sheet music, music, gravel hill school, books

'When stockings were first made, black or white were the only colours available. White was usually for Sundays. Lisle was the only type made for many years. Later colours became available'. A brown piece of thick cardboard with five different coloured stocking mending threads wound around branded product cards: white, cream, tan, brown and black. There is a typed explanation piece of paper, see the inscription below. Brands are - 1. The "Creschene" mending Four Strand, Specially made for Lisle, Silk and Art Silk Hose (white thread). 2. Two Steeples Hosiery (black thread). 3. Two samples of Myrene Hose Mending Fashion Shades Superior Quality ( three tan colours). 4. Astor Product Made in Australia, Every Home Super Mercerised Hose Mending. Typed on a piece of white paper, pasted on the card is: 'When stockings were first made, black or white were the only colours available. White was usually for Sundays. Lisle was the only type made for many years. Later colours became available'. As an extra explanation not related to stockings is typed: Pantees for women were not made until the 1800's. A type called "splits" were then made, and improved by Mrs Amelia Bloomer, to the type we know today.'sewing, sewing equipment, stockings, mending

Smiths began with a craftsman named Samuel Smith who in 1851 opened a shop in Newington Causeway, London, where he made and sold watches, clocks and precision instruments. Samuel had a son, Samuel Jnr who was apprenticed in his fathers business. Samuel Jnr eventually opened his own business at 85 Strand and later opened other premises at 9 Strand, Trafalgar Square and 68 Piccadilly. In 1899 he turned his business into a private limited company, S. Smith & Son Ltd. Samuel Jnr son, Sir Allan Gordon-Smith, joined him as Manager at 9 Strand in 1903 and laid the foundation of the vast Smiths organisation of the future, leading the company towards the supply of accessories for the then developing motor industry making car clocks and the first speedometers patented in 1904. In July 1914 a new company was formed under the name S. Smith & Sons (Motor Accessories) Ltd., to take over the motor accessory business of S. Smith and Son Ltd. and this became the main company of the group which eventually grew to become Smiths Industries Ltd. The original company S Smith and Sons Ltd., continued as jewelers and clock and watchmakers until 1930 when the company was taken over by Bravingtons retail jeweller chain. In 1931 Smiths decided to enter the domestic clock market and formed a new company, Smiths English Clocks Ltd., as the Clock and Watch division of S Smith & Sons (Motor Accessories) Ltd. This is the start of "Smiths Clocks" because this is when they began to manufacture domestic clocks in quantity. Moreover, they set out to produce these clocks at a price that the average householder could afford. S Smith & Sons (Motor Accessories) was at this time was the main company in the Smiths group of companies and their business developed both in the motor vehicle field and outside it. Smiths began to make automatic pilots for aircraft and, through the acquisition of a majority interest in Henry Hughes & Sons Ltd., entered the field of marine instruments. During the war from 1939 to 1945, Smiths' production expanded. There was a demand for motor, aircraft and marine instruments for the Services and the production of industrial instruments and it is at this time that our item was made. In 1944 many changes were made to the Smiths' organisation. The name of the principal company was changed from S Smith & Sons (Motor Accessories) to S. Smith & Sons (England) Ltd. and four new subsidiary selling companies were set up. These were Smiths Motor Accessories Ltd., Smiths Aircraft Instruments Ltd., Smiths Industrial Instruments Ltd., and Smiths English clocks Ltd. The manufacture of clocks and watches ceased in 1979 and 1983 saw Smiths withdraw from producing items for the motor industry.An item that is now regarded as a vintage, sought by horology collectors worldwide and is in excellent condition. The item is unique in that it was made specifically for ships by the Smith company a well known British clock manufacture. Its provenance is well established and it was made during the world war II era specifically for merchant and naval vessels of the time. Naval brass ships bulkhead clock. The clock face is of white enamel with black Roman numerals, an outer minutes ring and black steel hands. There is a subsidiary seconds dial with sweeping hand just above the centre and a fast/slow adjustment lever above that. There is no manufactures name on the dial. There are a beveled glass and brass hinged lid to the front of the clock. The clock is housed in a heavy brass case with screw holes around the circumference for mounting. There are no markings on the clock or mechanism flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, s smith and sons, clock, maritime clocks, clock makers, bulkhead clock