A wooden, transitional flat-top Horsman 'Eclipse Special' tennis racquet, with oriental gut (silk) strings, solid convex throat, and, cross-hatched slender octagonal handle. Inscription across obverse, from crown to throat: SPECIAL/E.I. HORSMAN/ECLIPSE. Materials: Wood, Metal, Lacquer, Ink, Glue, Silktennis

A Dayton tennis racquet, with a steel head, and small, open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Wooden section repainted red, with a synthetic handle grip wrapped around the lower handle. Materials: Wood, Metal, Glue, Lacquer, String, Paint, Synthetic materialtennis

A Tretorn '4' metal tennis racquet with double shaft; a screw-type tensioning bracket at bridge and separate aluminium head insert. Handle wrapped with maroon perforated leather grip tape. Nylon strings. Plastic butt cap with tensioning dial. Materials: Metal, Nylon, Adhesive tape, Adhesive label, Leather, Plastictennis

A Dura-Fiber prototype tennis racquet, featuring open throat, handle grip wrapped in brown leather and plastic butt cap. Vinyl strings, blue spraypainted logo in centre of net. No other labelling. White shaft/shoulders. Materials: Wood, Metal, Lacquer, Glue, Paint, Leather, Adhesive tape, Vinyl, Plastictennis

A Pro Kennex 'Power Dominator' split shaft tennis racquet, with a black plastic bridge, and strung with Wilson 'Gyro' (P174) nylon strings. The racquet is accompanied by original racquet cover. Materials: Metal, Composite Materials, Paint, Plastic, Adhesive tape, Leather, Ink, Adhesive label, Nylon, Vinyl, Metal, Plastic, Inktennis

Part of standard issue equipment to front line servicemen for first aid. Issued to Robert G. Jackson. Posted to Butterworth in 1966-69 as Flight Sergeant.Small compressed Brown packet made of paper with yellow label affixed on both sides. Label has black writing, Packet in middle has white pull strings so that package can be ripped open easily. Contents of packet is a white sterilised bandage to be used on burns. On both ends are instructions on how to open packet.Labelled - "Standard dressing B.P.C. No. 11 Medium burn dressing" followed by directions for use. Instructions on both ends - "To open packet pull tape".medical, butterworth,

A Dayton tennis racquet, with a steel head, and small, open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Small metallic plaque on shaft on obverse, with image of tennis player, reads: DAYTON/STEEL/RACQUET. Materials: Wood, Metal, Glue, Lacquer, String, Paint, Leather, Inktennis

A 'Birmal' model tennis racquet manufactuerd by Birmingham Aluminium Casting (1903) Co. Ltd. Has open throat and handle wrapped with string, metal butt cap and metal strings. Manufacturer name embossed on one edge of shaft. Model name and words: 'ALL METAL' embossed on other edge of shaft. Materials: Metal, Stringtennis

A Santor 'S Pro' model metal tennis racquet with double shaft, and metal bridge. Handle wrapped with synthetic grip tape. Black plastic butt cap and nylon strings. Manufacturer name and model name in decal stuck onto bridge. Materials: Metal, Nylon, Paint, Adhesive tape, Plastic, Cloth tape, Adhesive labeltennis

A Garcia 'X-15' metal tennis racquet with double shaft, and handle wrapped with black & red perforated leather grip tape. Nylon strings and plastic butt cap with adhesive label featuring manufacturer's logo. Black plastic protective strip covering crown. Materials: Metal, Nylon, Adhesive tape, Adhesive label, Leather, Plastictennis

A Dura-Fiber XT-Boron tennis racquet, featuring IPC core, open throat, handle grip wrapped in brown leather and plastic butt cap. Manufacturer's logo on shaft and butt cap. Plastic strips around head as anchor for strings. Materials: Wood, Metal, Fibre, Leather, Adhesive tape, Vinyl, Plastic, Inktennis

A Dura-Fiber Lite tennis racquet, featuring IPC core, orange frame with open throat, handle grip wrapped in brown leather and plastic butt cap. Manufacturer's logo on shaft and butt cap. Plastic strips around head as anchor for strings. Materials: Wood, Metal, Fibre, Leather, Adhesive tape, Vinyl, Plastic, Inktennis

A PK-15 tennis racquet with open throat and handle wrapped with leather. Vinyl strings & plastic butt cap. Handle wrapped in plastic packaging wrap. Adhesive label on wrap marked with: 'PK-15...50/50'. Reinforcement strip along crown. Materials: Graphite, Leather, Vinyl, Ink, Adhesive tape, Adhesive label, Plastictennis

A Lacoste metal tennis racquet with open throat and handle wrapped with perforated leather. Vinyl strings anchored to metal wire wrapped around head. Plastic butt cap with manufacturer information. Yellow plastic reinforcement in lower shaft features manufacturer's crocodile logo. Materials: Metal, Leather, Vinyl, Adhesive tape, Adhesive label, Plastictennis

A Spalding 'Top-Flite' tennis racquet, with: original gut netting, and red support strings; black with gold, perforated leather handle grip; ribbon whipping around shoulders; and original plastic handle grip packaging. Materials: Wood, Gut, Adhesive tape, Leather, Paint, Ink, Ribbon, Vinyl, Lacquer, Glue, Metal, Plastic, Stringtennis

Multi-part object of 6 identical racquets (parts are numbered from 2008.986.1 to 2008.986.6). Each racquet is: a Dunlop 'Maxply Austral' model with yellow net strings and handle wrapped in Dunlop-branded plastic packaging. Racquet in white paper factory bag. Materials: Wood, Plastic, Adhesive tape, Paint, Leather, String, Nylon, Papertennis

Nino Corda was a Geelong based textile designer who worked at various textile mills between 1957 & 2003. He travelled the world in search of the latest fashions and techniques and developed timeless designs that were much loved by Australians. These items are on rotational display at the National Wool Museum’s ‘In the Factory’ exhibition. For many years, Nino also worked as part of the Honorary Staff of the National Wool Museum. His passion for the world of textiles provided energy and knowledge to the visitors and staff of the museum. Although Nino has now retired from his honorary position and has hung up his Australian Tartan vest, these items will continue to serve the community in sharing the stories of Australian Textile design. These three bolts of fabric come from the same run of fabric used to tailor Suit Jacket 8045. All fabrics were designed by Nino Corda while he was working at the Foster Valley Mill. The bolts of fabric have an attached swing tag. This swing tag details information such as composition of the fabric, total amount of fabric and the design number.Three bolts of fabric with repeating pattern in 100mm grid. All three bolts have frayed edges, indicative of their need to be sent for finishing. The dominant colour in all three fabrics is grey. 8044.1 has red and green lines running vertically and horizontally and an attached swing tag. 8044.2 has red and orange lines running vertically and horizontally and an attached swing tag. Fabric bolt has yellow label attached to one edge of fabric, depicting the fabric’s number. 8044.3 has orange and blue lines running vertically and horizontally. No swing tag is attached.8044.1. Swing tag. Typed wording. Front. foster / valley / Pty / Ltd. / (Incorporated in Victoria) 8044.1. Swing tag. Typed and handwritten wording. Reverse. JONO TAILORING / CALL NO……………. / DESIGN 6302-49-5 / PIECE NO 9528 / METERS 3.5 STRINGS…………… / NET METERS…………… / COMPOSITION / 70% WOOL 30% POLYESTER 8044.2. Swing tag. Typed wording. Front. foster / valley / Pty / Ltd. / (Incorporated in Victoria) 8044.2. Swing tag. Typed and handwritten wording. Reverse. left over (?unknown handwriting?) / CALL NO…………… / DESIGN 6302-49-2 / PIECE NO…………… / METERS 6.0 STRINGS…………… / NET METERS…………… / COMPOSITION / 70% WOOL 30% POLYESTER.textile design

Black and white photograph on grey board. Forty two men in brass band. Three rows seated and one row standing. All in band uniform. Bearded man in centre with no instrument. Four standing with no instruments. Band is brass, woodwind and strings (one bass?) Insignia on cap COULD be 'VR' (Victorian Railways??), with crown above (Victoria Regina?)person, group, band

A Dayton tennis racquet, with a steel head, and small, open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Decal inscription on obverse: NEW/DAYTON/RACQUETS. Handle and shaft are patyially wrapped in cloth tape. Materials: Wood, Metal, Glue, Lacquer, Leather, String, Ink, Paint, Cloth tapetennis

A Dayton Pilot tennis racquet, with a steel head and throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Racquet head stringing continues through into the fully opened throat. Decals of maker and model, with patents, feature on right side of shaft. Materials: Wood, Metal, Glue, Lacquer, Paint, Leather, Ink, Cordtennis

A Dayton Pilot tennis racquet, with a steel head and open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Racquet head stringing continues through into the fully opened throat. Decal of model features on right side of shaft. Materials: Wood, Metal, Glue, Lacquer, Paint, Leather, Ink, Cordtennis

An Head 'Ti.S7' tennis racquet, featuring: oversized head, with perforated plastic crown cover; titanium frame with bridgeless head and split shaft; 'Ti.Fiber' net strings, strung across and along head and down shaft; Head 'Softac' synthetic handle grip, and 'Shockstop' plastic butt cap. Materials: Titanium, Plastic, Synthetic material, Metal, Ink, Painttennis

A 'Birmal' model tennis racquet manufactured by Birmingham Aluminium Casting (1903) Co. Ltd. Has open throat and handle wrapped with string whipping. Metal butt cap. Metal strings. Manufacturer name embossed on one edge of shaft. Model name and words: 'ALL METAL' embossed on other edge of shaft. Materials: Metal, String, Woodtennis

A 'Birmal' model tennis racquet manufactured by Birmingham Aluminium Casting (1903) Co. Ltd. Has open throat and handle wrapped with string whipping. Metal butt cap. Metal strings. Manufacturer name embossed on one edge of shaft. Model name and words: 'ALL METAL' embossed on other edge of shaft. Materials: Metal, String, Woodtennis

A PK-15 tennis racquet with open throat and handle wrapped with leather. Vinyl strings & plastic butt cap. Handle wrapped in plastic packaging wrap. Adhesive label on wrap marked with: 'L.RANGE PK-15...80C/20F'. Reinforcement strip along crown. Materials: Graphite, Leather, Vinyl, Ink, Adhesive tape, Adhesive label, Plastictennis

A Prince 'Precision Ascent Lite' tennis racquet, with Prince 'Softzorb' synthetic handle grip, and Prince 'Duraflex 17' synthetic gut strings. Also featuring is a vinyl racquet cover, and Identity Card/Warranty. Materials: Graphite, Composite Materials, Paint, Ink, Plastic, Synthetic Gut, Synthetic material, Vinyl, Metal, Plastic, Ink, Cardboard, Inktennis

A collection of 10 Spalding '"Pancho" Gonzales Autograph' tennis racquets, featuring: brown/black with gold, perforated leather handle grips; clear gut netting with red support strings; and ribbon whipping around shoulders and shaft. Materials: Wood, Adhesive tape, Leather, Paint, Ink, Ribbon, Vinyl, Lacquer, Glue, Metal, Plastic, Gut, Stringtennis

A collection of 17 Spalding '"Pancho" Gonzales Autograph' tennis racquets, featuring: brown/black with gold, perforated leather handle grips; clear gut netting with black support strings; and ribbon whipping around shoulders and shaft. Materials: Wood, Adhesive tape, Leather, Paint, Ink, Ribbon, Vinyl, Lacquer, Glue, Metal, Plastic, Gut, Stringtennis

A Dayton Pilot tennis racquet, with a steel head and throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Racquet head stringing continues through into the fully opened throat. Decals of maker and model, with patents, feature on front, and right side of shaft. Materials: Wood, Metal, Glue, Lacquer, Paint, Leather, Ink, Cordtennis

A Dura-Fiber XR-Graphite tennis racquet, featuring IPC core, brown frame with open throat, handle grip wrapped in tan leather printed with manufacturer name. Plastic butt cap. Manufacturer's logo on shaft and butt cap. Plastic strips around head as anchor for strings. Materials: Wood, Metal, Fibre, Leather, Adhesive tape, Vinyl, Plastic, Inktennis