Showing 382 items
matching the royal australian engineers
-
Bendigo Military Museum
Photograph - 4 Fd Svy Sqn Closure Ceremony 25 Nov 1995, 4 Fd Svy Sqn, Keswick Barracks, Adelaide, 25.11.1995
... Corps was amalgimated into the Royal Australian Engineer Corps... Corps was amalgimated into the Royal Australian Engineer Corps ...Between 1915 and 1951, military topographical mapping in SA was conducted by Royal Australian Survey Corps (RASvy) units based outside the state. In February 1952, Army HQ Field Survey Section (Central Command Detachment) was established in Adelaide in a drill hall at Largs Bay. It was tasked with providing map coverage in the Woomera and Southern areas of the state. The section was subsequently reorganised as Central Command Field Survey Section moving firstly to Hampstead Barracks, Hampstead in 1953 and then into accommodation at Keswick Barracks in 1954. In 1957 the Section commenced mapping operations in the NT. The Unit was relocated to the old cavalry stables in 1961 and was redesignated Central Command Survey Unit and remained there till 1973. In 1970 the Unit was redesignated 4 Fd Svy Sqn and engaged in operations conducted in PNG from 1972 to 1974 inclusive. In 1973 the Squadron moved into a brand new two-storey specially designed and purpose built building adjacent to the old building. The old building then became the Squadron Q and Map store with an interconnecting lobby to the new building. Since 1975 the Unit was involved in the 1:50,000 Mapping Programme in WA, NT, QLD, SA and conducted many other operations within Australia and overseas. Post disbandment of the Corps the old Squadron building (cavalry stables) now houses the Army Museum of South Australia (AMOSA). The Royal Australian Survey Corps was amalgimated into the Royal Australian Engineer Corps in July 1996. In the lead up to this amalgamation, 4 Field Survey Squadron Keswick Barracks, Adelaide, South Australia was disbanded in 1995. A closing Ceremony was held on 25 November 1995 at 4 Fd Svy Sqn Keswick Barracks attended by about 208 former members of the Unit. A photo was taken of attendees at that event on the day and a list was prepared of attendees. All attendees were sent a copy of the photograph and the list of names as a momento of the Unit and the ceremony..1P A4 Print of an original photo of attendees at the 4 Fd Survey Sqn Closure Ceremony at Keswick Barracks 25 Nov 1995. .2P A4 Print of the names of the attendees at the 4 Fd Survey Sqn Closure Ceremony at Keswick Barracks 25 Nov 1995. Approx 208 attendees.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr, 4 fd svy sqn -
Frankston RSL Sub Branch
Swagger Stick
... , with the emblem of the Royal Australian Electrical and Mechanical..., with the emblem of the Royal Australian Electrical and Mechanical ...Trench art, Vietnam era. Made of a wooden rod and a spent 50 calibre cartridge which has been cut into two with one piece attached to either end of the rod to form an ornamental stick, commonly referred to as a 'swagger stick'. Half of the cartridge, complete with a projectile forms one end with the other half of the cartridge forming the opposite end. There is a gilt uniform button attached to the cartridge detonator end, with the emblem of the Royal Australian Electrical and Mechanical Engineers (RAEME). -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... essential equipment for Royal Australian Electrical and Mechanical... essential equipment for Royal Australian Electrical and Mechanical ...M113 family of Armoured vehiclesentered service with Australian Army circa 1955.Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Research and historical display value, Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Green vinyl covered manual 54 pages, bound with metal screws being technical Manual User Handbook Carrier Fire Support, Full Tracked M113A1 ( FS }. Published by Australian Army 17 December 1970Ink stamp on title page " 8/13 VMR Regimental Collection " -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... essential equipment for Royal Australian Electrical and Mechanical... essential equipment for Royal Australian Electrical and Mechanical ...This vehicle was issued to 8/13 VMR for transport services in 1970s and 1980s. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Maroon stiff vinyl covered Technical Manual being User Handbook Truck Cargo 2.5 Ton GS 4 x 4 with winch. Published by Australian army 1967. Covers and pages secured with metal fastner.Ink stamp on title page " 8/13 VMR Regimental Collection " -
8th/13th Victorian Mounted Rifles Regimental Collection
Print - LAD Vietnam
... Soldier tradesmen belonging to the Royal Australian... melbourne Soldier tradesmen belonging to the Royal Australian ...Soldier tradesmen belonging to the Royal Australian Electrical and Mechanical Engineers Corps (RAEME) were attached to and Armoured Corps regiment as a Light Aid Detachment (LAD) to provide battlefield repairs to armoured vehicles. Captain Jim Farrelly joined 8/13 Victorian Mounted Rifles as a trooper. He rose through the ranks then as a consequence of his civilian trade as a mechanic he transferred to RAEME and took command of the regiment's LAD.Framed coloured print of painting of Light Aid Detachment making major repairs to a Centurion tank in the Vietnam battlefield. Helicopter gunships are providing protection.Presented to 8/13 VMR Officers Mess by OC RAEME att Capt Farrellyraeme, farrelly, lad, repairs, vmr, officer, mess -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... for Royal Australian Electrical and Mechanical Engineers (RAEME... for Royal Australian Electrical and Mechanical Engineers (RAEME ...Relates to Chevrolet Armoured made in USA during WW11.Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or Tech Support Troop (TST) and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Research vehicleBuff coloured soft cover manual being Technical Manual Ordnance Maintenance Transmission, Transfer Case, and Steering Systems for Medium Armoured Car T17E1. Published by War Department ( USA ) 7 October 1943.Heavy ink stamp on cover " Archive Copy Location " then follows in pen " 3/A/1". In red ink top right corner " T10 { or} T16" -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... were essential equipment for Royal Australian Electrical... were essential equipment for Royal Australian Electrical ...The American designed 'Jeep' was issued to Australian Army in WW11 and the Post-War CMF. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Buff coloured covered booklet, saddle- stitched and stapled: 40 pages being Instruction Book Driving & Maintenance for trucks .25 Ton ( USA ). Published by Australian Military Forces 1944.Ink stamp on front cover " C Sqn 8/13 Victorian Mounted Rifles " -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... Australian Electrical and Mechanical Engineers (RAEME) tradesmen... Australian Electrical and Mechanical Engineers (RAEME) tradesmen ...8/13 VMR was issued with M113 Armoured Personnel Carriers in 1973. These vehicles had an Amphibious capability Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Green covered booklet, thermal bound, 32 pages, being Standing Orders for the Operation of Amphibious Vehicles. Published by Royal Australian Armoured Corps, Australian Army. 1973Ink stamp on title page " 8/13 VMR Regimental Collection ". Inside back page list of names and numbers.8/13 victorian mounted rifles, light aid detachment, manual -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... and User Handbooks were essential equipment for Royal Australian... and User Handbooks were essential equipment for Royal Australian ...Tracked cargo carrier is part of M113 family of armoured vehicles used by 8/13 VMR in 1970s and 1990s. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or Tech Support Troop (TST) and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Buff coloured soft covered manual bound with heavy metal staples, 353 pages being Organisational Maintenance Manual Part Seven for Carrier Cargo Tracked 6 Ton M 548.Published by Headquarters Department of the Army ( USA ) February 1966.Ink stamp on title page " 8/13 VMR Regimental collection " and ink notation on cover " Obsolete " and ink on spine " 21 " -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... Australian Electrical and Mechanical Engineers (RAEME) tradesmen... Australian Electrical and Mechanical Engineers (RAEME) tradesmen ...Corporal L. Frohling served with the Tech Support Troop and later Workshop Troop of 8/13 VMR in 1970s and 1980s.Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Green coloured vinyl covered manual, 322 pages, bound with metal screws being Maintenance Manual Truck Cargo 2.5 Ton CL Ford D400. Publisher not stated./On front cover " L. Frohling " Ink stamps on title page " 13 April 1970." RAEME Att. 1 COD Bandiana and ' 8/13 VMR regimental Collection " -
8th/13th Victorian Mounted Rifles Regimental Collection
Folder
... equipment for Royal Australian Electrical and Mechanical Engineers... equipment for Royal Australian Electrical and Mechanical Engineers ...Every 'B' Vehicle that is non armoured had an AB 416 Logbook. It was kept on the vehicle and was a record of servicing and repairs. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth centuryHeavy brown coloured card covers with fabric spine, holding paper sheet ruled for entries of servicing, also instructions for drivers. -
Bendigo Military Museum
Uniform - JACKET, BATTLE DRESS, ARMY, Australian Defence Industries, 1954
... - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL... AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia ..."Herbert Rex WILLIS" Reg No. 342872 Service Details. Refer Cat No. 5231.31. Jacket - Khaki colour, wool serge fabric, Battle dress style, belted at the waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder insignia - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia on sleeves - brown, white and red, - Warrant Officer Second Class. Service Ribbons above left pocket L-R, Vietnam Campaign Medal. Long Service Medal, South Vietnamese Medal with clasp "60-". Light khaki colour cotton twill fabric lining. Manufacturers white cotton twill fabric label - inside on left pocket lining. 2. Lanyard - dark blue colour cotton cord with knots. 1. Manufacturers information on label - black ink print "REGIMENTAL NO./ NAME", Red ink print "M.TX/IZE 5". On pocket lining - purple ink "D^D/ MADE IN AUSTRALIA/ 1954. On collar lining - handwritten, black ink pen "WILLIS" .uniform, army, battle dress, rex willis -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Flag, 173rd Airborne Brigade (US)
... Troop Royal Australian Engineers, 161 Reconnaissance Flight... Troop Royal Australian Engineers, 161 Reconnaissance Flight ...173 AIRBORNE BRIGADE (SEPARATE) US ARMY 1 RAR BATTLE GROUP BIEN HOA 1965-1966 On May 5, 1965, the Brigade deployed to South Viet Nam as the first US Army ground combat unit in that war. Upon arrival, the 1st Battalion of the Royal Australian Regiment (1 RAR) and a battery from New Zealand (161Royal NZ Artillery) were attached to the Brigade -- making the 173d Airborne the only multi-national combat unit in the war. Initially headquartered in Bien Hoa, the Brigade operated in the four provinces around Saigon. (Xuan Loc, Long Khanh, Phuoc Long & Phuoc Tuy), but (in its roll as a "Fire Brigade") also went to the Central Highlands (Pleiku / Kontum) to fight Viet Cong. The 173d also conducted constant operations against the southern stronghold of the VC Main Force in the legendary Iron Triangle in War Zone D. The brigade was organized as a balanced airborne combat force consisting of two infantry battalions, an artillery battalion, a support battalion, an engineer company, a cavalry troop, an armour company, and a headquarters company. Upon activation, it became the first and only separate airborne brigade in the United States Army. This was the beginning of a long series of "Firsts" for the Brigade. On 5 May 1965, it became the first US Army ground combat unit committed to the war in South Vietnam, where further organizational changes were to take place. Australians attached to the Brigade were: 1st Battalion, of the Royal Australian Regiment (I RAR) and support troops of the 4/19th Prince of Wales Light Horse Regiment (1Troop), 105 Field Battery Royal Australian Artillery, 161 Field Battery Royal New Zealand Artillery, 3 Field Troop Royal Australian Engineers, 161 Reconnaissance Flight, Royal Australian Army Air Corps, 1st Australian Logistical Support Company. The Brigade's two infantry battalions, the First Battalion of the 503' Infantry (1/503`d) and the Second Battalion, of the 503`d Infantry (2/503`) and the attached Australians of 1 RAR constituted the infantrymen available to the Brigade. Their mission was to protect the Bien Hoa Air Base and to close with and destroy or capture the enemy. This was in fact the first operational ground force formed under the ANZUS Defence Treaty. ANZUS was a mutual defence treaty signed in 1951 between Australia, New Zealand and the United States of America. In 1965 the spirit of this treaty appeared as 173d Airborne Brigade (Sep) a tri-national brigade. The only such tri-national fighting force formed during the Vietnam War. On deployment to South Vietnam in 1965, 1 Troop A Squadron, 4th/19th Prince of Wales's Light Horse Regiment was part of the US 173rd Airborne Brigade combat group. Flag, two colours divided vertically, hoist half mid blue, fly half red. Badge of 173rd Airborne Brigade (730 x 490 mm) in centreflag, 173rd airborne, south vietnam -
Kew Historical Society Inc
Biographical information, Ronald Horace Setford (1915–1988)
... with the 9 Australian Army Transport Company, Royal Australian... with the 9 Australian Army Transport Company, Royal Australian ...Ronald Horace Setford was born in April 1915 at 18 Church Street, Hawthorn, at his family’s home above their decorator shop. He was the second of three sons born to Horace Turner Setford (1880-1944) and Mabel Crofts (1887-1943). He attended Hawthorn West Primary School and then Swinburne before beginning work in his family’s business ‘Setford and Son’ in October 1930. This was formalised in April 1931 when he became a carpentry and joinery apprentice. In 1934 he graduated as a grade four carpenter. Ron worked in the family business until 1964 and then worked at J S Kidd and Co Pty Ltd as a storeman until his retirement in December 1973. Ron married Grace Muriel Agnes Perrey (1915-2001) in 1936 and they first lived in Kew around 1940, at 38 Marshall Avenue. Ron served in the Citizen Military Forces as a sapper with the 9 Australian Army Transport Company, Royal Australian Engineers, signing up a week after Darwin had been bombed. He spent time in Darwin, Wayville (South Australia), Herberton and Grovely (Queensland). Afterwards he refused to eat rice, never spoke of the war, nor took part in any ANZAC day proceedings. In 1941, Ron and Grace bought their block of land at 9 Tanner Avenue, East Kew, part of the Old Golf Links Estate, for £225. It was not until December 1945 that Ron started building their home and they moved in during May 1947. Ron and Grace remained there for thirty-seven years until the house was sold to their nephew in 1984. It has since been demolished. Ron’s great passion was photography and in the early 1960s he purchased his Minolta camera. Slide evenings at Tanner Avenue were a regular occurrence. Ron made his own title slides, interval slides and end slides. As well as many holiday photos (around Australia and their world trip in 1966), he enjoyed photographing local landmarks, flowers, insects and family. One of Ron’s photography projects was to record the progress of the building of the Eastern Freeway. This was near their home, and he’d walk down to the works on a regular basis, dressed smartly, with his camera in hand. The workers thought he was an official photographer, and he was allowed on site to take his photos. In 1984, Ron and Grace downsized and moved to Bayswater. Ron passed away on 31 October 1988 at the Maroondah Hospital in Ringwood East, at age 73. His ashes were spread on his beloved rose bushes at Tanner Avenue. Lauren Thomson, 2025ron setford, 9 tanner avenue -- kew east (vic, setford and son -- 18 church st (hawthorn), grace muriel agnes perrey, 9 australian army transport company, j s kidd and co pty ltd, eastern freeway, f19 freeway -
Bendigo Military Museum
Photograph - Army Survey Regiment – CO’s Parade and Defence Force Service Medal Presentations, c1987
... Engineers and the Royal Australian Corps of Transport. ... Engineers and the Royal Australian Corps of Transport. Royal ...These 34 photographs were taken at a CO’s parade at the Army Survey Regiment, Bendigo in c1987. The Colonel Commandant (honorary appointment) of the Survey Corps - COL Clem Sargent (Retd), presented the Defence Force Service Medal to four personnel in recognition of 15 years of efficient remunerated service, or the Clasp for 5 years of additional service. Recipients were WO1 Neville Stone and three unidentified support staff from the Australian Army Catering Corps, Royal Australian Electrical and Mechanical Engineers and the Royal Australian Corps of Transport. This is a set of 34 photographs of a CO’s parade and the presentation of the Defence Force Service Medal, at the Army Survey Regiment, Bendigo in c1987. The colour photographs are on 35mm negative film and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 96 dpi. .1) to 2) - Photo, colour, c1987. Squadrons marching on parade ground. .3) to .4) - Photo, colour, c1987. Squadrons formed up on parade ground. RSM WO1 Jeff Lynch delivering orders. .5) - Photo, colour, c1987. Officers at ease in readiness to take posts. .6) - Photo, colour, c1987. Squadrons formed up on parade ground. RSM WO1 Jeff Lynch delivering orders. .7) - Photo, colour, c1987. RSM WO1 Jeff Lynch handing over to 2IC MAJ Terry Edwards. .8) - Photo, colour, c1987. Officers marching on to take posts. .9) - Photo, colour, c1987. L to R: CPL Paul Richards, SPR Todd Reynolds, SPR Eric Nicholson, MAJ Roger Rix, CPL Steve Hill, unidentified, CPL Russ Mollenhauer, remainder. .10) - Photo, colour, c1987. Guest of Honour - COL COMDT COL Clem Sargent arrives on parade ground, remainder unidentified. .11) - Photo, colour, c1987. Army Survey Regiment ready to salute Guest of Honour - COL COMDT COL Clem Sargent. .12) - Photo, colour, c1987, Guest of Honour - COL COMDT COL Clem Sargent returns salute. .13) - Photo, colour, c1987, L to R: 2IC MAJ Terry Edwards, SPR Eric Nicholson, COL COMDT COL Clem Sargent, SGT John ‘Stormy’ Tempest, unidentified (x2), SGT Mal Paterson, SGT Kevin Boehm, SSGT Peter Mustart, CPL Trevor Poll, SGT Terry Danger. .14) - Photo, colour, c1987, In left foreground MAJ Bob McHenry, unidentified personnel, unidentified officer, 2IC MAJ Terry Edwards, COL COMDT COL Clem Sargent, 3rd from right CAPT Graeme Wastell, CPL John Martin, SGT Martin Evans. .15) - Photo, colour, c1987, L to R: unidentified personnel, unidentified officer, 2IC MAJ Terry Edwards, COL COMDT COL Clem Sargent, SSGT Rick Van der Bom, CPL Paul Hunter, unidentified personnel, CAPT Graeme Wastell, SGT Paul Leskovec CSM, CPL John Martin, SGT Paul Cheater, SGT Martin Evans. .16) - Photo, colour, c1987, L to R: SGT Martin Evans. 2IC MAJ Terry Edwards, unidentified officer, COL COMDT COL Clem Sargent, unidentified personnel, SGT Paul Leskovec CSM, SGT Paul Cheater, SSGT Brian Collings, SSGT Ian ‘Rock’ Thistleton, WO1 Stevo Hinic. .17) - Photo, colour, c1987, L to R: unidentified personnel, 2IC MAJ Terry Edwards, COL COMDT COL Clem Sargent, SGT Roger Rees, unidentified female officer, SGT Phil Smalley, CPL Steve Coulsen, SPR Toni Wright, SGT Steve Gloster, SSGT Ken Talbot-Smith, CPL Darren Wilkinson, unidentified, SGT Paul Hopes. .18) - Photo, colour, c1987, L to R: unidentified female officer, COL COMDT COL Clem Sargent, unidentified, SGT Phil Smalley, CPL Steve Coulsen, SPR Toni Wright, CPL Steve Gloster, SSGT Ken Talbot-Smith, CPL Darren Wilkinson, SGT Paul Hopes. .19) - Photo, colour, c1987, L to R: unidentified personnel, CPL Peter ‘Jack’ Elverd, 2IC MAJ Terry Edwards, COL COMDT COL Clem Sargent, unidentified, SGT Stuart Hibbert, unidentified, Ted Burgess. .20) - Photo, colour, c1987, L to R: unidentified officer, COL COMDT COL Clem Sargent, 2IC MAJ Terry Edwards. .21) - Photo, colour, c1987, L to R: unidentified (x3), WO1 Neville Stone, COL COMDT COL Clem Sargent, SSGT Greg Anderson, unidentified officer, CAPT Graeme Wastell. .22) to .24) - Photo, colour, c1987, L to R: unidentified (x3), WO1 Neville Stone, COL COMDT COL Clem Sargent, SSGT Greg Anderson, unidentified officer. .25) to .26) - Photo, colour, c1987, L to R: unidentified, WO1 Neville Stone, unidentified, COL COMDT COL Clem Sargent, SSGT Greg Anderson, unidentified officer. .26) to 30) - Photo, colour, c1987, L to R: unidentified (x2), WO1 Neville Stone, COL COMDT COL Clem Sargent, SSGT Greg Anderson, unidentified officer. .31) to .34) - Photo, colour, c1987, L to R: unidentified, WO1 Neville Stone, COL COMDT COL Clem Sargent, unidentified officer..1P to .34P – There are no personnel identified.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... were essential equipment for Royal Australian Electrical... were essential equipment for Royal Australian Electrical ...Contains information about .30 and .50 Browning Machine Guns which were common to aircraft and armoured fighting vehicles used by 8/13 VMR. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or Tech Support Troop (TST) and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Heavy card covered manual with fabric spine, screw bound being Standard Notes for Armourers and Fitters Armourer. Published by Airforce Headquarters Melbourne August 1943.Ink stamp on title page " 8/13 VMR Regimental Collection " -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... essential equipment for Royal Australian Electrical and Mechanical... essential equipment for Royal Australian Electrical and Mechanical ...Australian Army was equipped with M3 General Grant tanks during WW11. CMF Armoured Regiments had M3 General Grant tanks 1948 - 1955. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Buff colour covered booklet, 160 pages, thermal bound being Technical Manual Ordnance Maintenance Medium Tanks M3, M3A1 and M3A2. Published by US War Department 9th May 1942Ink stamp on title page " 8/13 VMR Regimental Collection " -
8th/13th Victorian Mounted Rifles Regimental Collection
Manual
... for Royal Australian Electrical and Mechanical Engineers (RAEME... for Royal Australian Electrical and Mechanical Engineers (RAEME ...Comet was a WW11 British tank. Publication possibly issued to CMF Units in anticipation of receiving Comet tanks in early post war period. Instead Centurion tanks were received, Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or Tech Support Troop (TST) and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Cream coloured soft covered manual being Inspection Instructions ( Provisional ) Overhaul Comet Tanks. 88 pages and 6 fold out sheets. Stapled on short edge. Published by British Army September 1948Dyna tape on front cover " 629.28.Bri -
8th/13th Victorian Mounted Rifles Regimental Collection
Book - Saracen manual
... Handbooks were essential equipment for Royal Australian Electrical... Handbooks were essential equipment for Royal Australian Electrical ...This family of wheeled armoured vehicles came into use in Australian Army including 8/13 VMR circa 1960. They were phased out and replaced with M113 track vehicles, Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or Tech Support Troop (TST) and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Two copies of pale green colour soft cover manual, 170 pages with annexures, being Saracen Mk1 APC Provisional User Handbook. String tie binding. Published by UK Royal Armoured Corps, The War Office, November 1954.Ink stamp on title page " 8/13 VMR Regimental Collection " Dyna tape label " 629.28 AMF"manual, military, vehicle, apc, saracen, workshop -
Bendigo Military Museum
Badge - VARIOUS BADGES, FRAMED, c.1998
... & Mechanical Engineers” 5. Royal Australian Army Medical Corp 6... Engineers” 5. Royal Australian Army Medical Corp 6. Australian Army ...Cream wooden framed selection of 9 badges displayed on cream coloured background.Top centre: “BADGES OF CORPS ASSOCIATED WITH PASSCHANDAELE BARRACKS 1964 TO 1977” Underneath each badge: “1. Royal Australian Infantry 2nd Battalion Royal Victorian Regiment 2. & 3. Royal Australian Army Service Corps 4. Royal Australian Electrical & Mechanical Engineers” 5. Royal Australian Army Medical Corp 6. Australian Army Catering Corp 7. Women's Royal Australian Army Corps 8. Royal Australian Army Ordnance Corps 9. Royal Australian Corps of Transportpasschendaele barracks trust, badges, framed -
Bendigo Military Museum
Photograph - Johnson Ground Elevation Meter (JGEM) Survey Vehicle - Army Survey Regiment, Fortuna, Bendigo, c1960s
... was integrated into the Royal Australian Engineers in 1996, the JGEM... was integrated into the Royal Australian Engineers in 1996, the JGEM ...This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The JGEM vehicle was extensively used by RA Svy within Australia from the late 1960s. A limited number of Ground Elevation Meter (GEM) station wagon type vehicles were manufactured by General Motors Corporation (GMC) in the USA for the United States Geological Survey, Canada’s mapping agencies, RA Svy and National Mapping (Natmap). The GEM was a four-wheel drive, four-wheel steer vehicle. Four-wheel steering was necessary to avoid systematic errors caused by non-tracking of front and rear wheels on conventionally steered vehicles. The manufacturer substituted the rear axle with a front axle and connected them to form the four-wheel steering mechanism. The two Australian GEM vehicles, referred to as Johnson GEMs (JGEMs) were converted into right-hand drive. After delivery in 1964, acceptance Natmap and RA Svy testing and operator training was undertaken at the Army's School of Military Survey located at Balcombe, Victoria. A small fifth wheel was mounted on a cantilever arm suspension midway between the front and rear wheels on the right side of the vehicle. It was lowered to and raised from its operating position by use of a constant pressure air cylinder. A telescopic bar, suspended between the front and rear axles, provided the reference datum for the angle measurement. The wheel provided the velocity or distance signal through a pulse generator system. A sensitive pendulum mounted on this bar provided the angle measurement for each minute distance traversed. The JGEM contained electromechanical instruments used to determine relative elevations, by trigonometric principles, along a traversed path. These relative elevations were obtained through apparatus which measures the instantaneous angle of inclination of the road and the instantaneous velocity of the meter along such a path. Road routes over which the JGEM operated were planned so that each started and ended as near as practicable to an existing point of known elevation (formally referred to as a level traverse bench mark). The difference in height from the bench mark and the road surface alongside the JGEM’s fifth wheel was measured with a level and staff. Along each route, mapping control photo reference points where new elevation values were required were identified on aerial photographs. Under favourable conditions it was possible to survey as much as 160km in an ordinary working day. The first of RA Svy’s JGEM operations was undertaken in 1:250,000 scale map areas of Queensland. CPL John Hook was the JGEM’s main operator in the early 1970s undertaking operations covering 1:250,000 scale map blocks over northern Victoria and central NSW, each requiring 36 points (9 runs of photography and 4 points across. SPR Lyn Thompson and SPR Bob McDonagh teamed with CPL Hook on some of these JGEM operations. When RA Svy was integrated into the Royal Australian Engineers in 1996, the JGEM vehicle with the Survey Corps collection was donated to its museum. It is believed to be the last of the original manufactured fleet in existence. The JGEM has undergone extensive refurbishment to achieve roadworthiness and is currently housed at The Australian Army Museum of Military Engineering, Hoslworthy Barracks, NSW. It can be viewed by making an appointment with the museum’s curator.This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The photographs were on 35mm slide film and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1960s, Johnson Ground Elevation Meter (JGEM) Survey Vehicle .2) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .3) - Photo, colour, c1960s, JGEM instrumentation. .4) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .5) - Photo, colour, c1960s, JGEM tyre pressure controller .6) - Photo, colour, c1960s, JGEM rear doors, SGT Geoff Briggs. .7) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position, SGT Geoff Briggs. .8) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position. .9) & .10) - Photo, colour, c1960s, JGEM tyre pressure system, SGT Geoff Briggs. .11) - Photo, colour, c1960s, JGEM tyre pressure system. SGT Geoff Briggs. .12) - Photo, colour, c1960s, JGEM levelling scope, levelling staff, unidentified technicians. .13) & .14) - Photo, colour, c1960s, JGEM levelling scope, unidentified technician. .15) & .16) - Photo, colour, c1960s, probably survey operation adjusted height plotted on block base sheet. .1P to .16P - Some of the equipment is annotated on the frame of the 35mm slides.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying -
Bendigo Military Museum
Uniform - JACKET AND TROUSERS, BATTLE DRESS, ARMY, Australian Defence Industries, 1981-82
... with gold embroidered lettering "ROYAL AUSTRALIAN ELECTRICAL... lettering "ROYAL AUSTRALIAN ELECTRICAL AND MECHANICAL ENGINEERS ...1. Jacket - Khaki colour wool serge fabric, battle dress style, belted at the waist with metal buckle. Green colour plastic buttons. Collar, shoulder epaulettes, two front pockets with button down flap. Shoulder sleeve insignia, navy blue colour with gold embroidered lettering "ROYAL AUSTRALIAN ELECTRICAL AND MECHANICAL ENGINEERS". Rank Insignia - lower sleeve - Warrant Officer, Class 1. Manufacturers white cotton fabric label, inside left pocket. 2. Trousers - Khaki colour wool serge fabric. green plastic button, metal zipper fly, Fob pocket, two side pockets, one back pocket with button down flap. Manufacturers white cotton fabric label, back inside waistband.1. & 2. Manufacturers information - black ink print "BERENSEN PTY LTD/VICTORIA 1961/62/ NAME/ SERVICE NO./ DRY CLEAN ONLY/ PRESS IN ORIGINAL/ CREASE LINE/ USE DAMP CLOTH OR/ STEAM IRON/ MEDIUM TO HOT RANGE/ CREASE SET BY SIRO SET. Black ink stamp "DM FIELD/ WO2/ 313679".uniform, army, battle dress -
Melbourne Legacy
Article, Legatee George W Blackwood, President 1975
... in the Corps of the Royal Australian Electrical and Mechanical... Australian Electrical and Mechanical Engineers and was awarded an OBE ...A cutting from from a Melbourne Legacy President's report showing a photo of Legatee George Blackwood (President of Melbourne Legacy in 1975). It was collected to be a record of a photo of past presidents. In World War 2 Legatee Blackwood served in the AIF in the Middle East, New Guinea and Borneo in the Corps of the Royal Australian Electrical and Mechanical Engineers and was awarded an OBE for services whilst commanding the 2/1 Army Field Workshop with the 9th Australian Division in the Alamein Campaign. He achieved the rank of Colonel. He joined Legacy in 1964 on the nomination of Legatees John Summerton and AN Fraser. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee George Blackwood a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.Article with a black and white photo of Legatee George W Blackwood - President 1975past presidents, george blackwood -
Melbourne Legacy
Article, Bulletin VALE Legatee George Blackwood
... and Borneo in the Corps of the Royal Australian Electrical... and Borneo in the Corps of the Royal Australian Electrical ...An article from the Melbourne Legacy Bulletin on the death of Legatee George Blackwood (President of Melbourne Legacy in 1975). The Bulletin published articles on Legatees when they passed away. Legatee Blackwood, born in 1907 and died in 1982. In World War 2 Legatee Blackwood served in the AIF in the Middle East, New Guinea and Borneo in the Corps of the Royal Australian Electrical and Mechanical Engineers and was awarded an OBE for services whilst commanding the 2/1 Army Field Workshop with the 9th Australian Division in the Alamein Campaign. He achieved the rank of Colonel. He joined Legacy in 1964 on the nomination of Legatees John Summerton and AN Fraser. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee George Blackwood a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.Typed copy of a page from the Legacy Bulletin on the death of Legatee George Blackwood - President 1975Bulletin No 1209. 17.6.1982. Page No 3 and 4past presidents, vale, george blackwood -
Bendigo Military Museum
Administrative record - RASvy - Defense Mapping Agency Exchange Officer Mid Tour Report MAJ D A Campbell 1986, Major Douglas A Campbell US Army Corps of Engineers, 1986
A 2 x year personnel exchange program existed between RASvy and the US Army Corps of Engineers. This is the Mid Term Tour Report produced by Douglas A Campbell, Major, Corps of Engineers, US Army Exchange Officer, Australia in 1986A4 Booklet, cream coloured card cover, Defense Mapping Agency and Royal Australian Survey Corps badges in purple on front cover, plastic binderroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr -
Bendigo Military Museum
Administrative record - RASvy - Defense Mapping Agency Exchange Officer Mid Tour Report MAJ Bruce J Donaldson 1990, Major Bruce J Donaldson US Army Corps of Engineers, 1990
A 2 x year personnel exchange program existed between RASvy and the US Army Corps of Engineers. This is the Mid Term Tour Report produced by Bruce J. Donaldson, Major, Corps of Engineers, US Army Exchange Officer, Australia in 1990A4 booklet, cream colored light cardboard cover, Defense Mapping Agency and Royal Australian Survey Corps Badges in purple on front cover, Plastic ring bindingroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr -
Bendigo Military Museum
Administrative record - RASvy - Defense Mapping Agency Exchange Officer Mid Tour Report MAJ William P Smith 1992, Major William P Smith US Army Corps of Engineers, 1992
A 2 x year personnel exchange program existed between RASvy and the US Army Corps of Engineers. This is the Mid Term Tour Report produced by William P Smith, Major, Corps of Engineers, US Army Exchange Officer, Australia in 1992A4 Booklet, plastic cover over light cardboard, paper report. Defense Mapping Agency and Royal Australian Survey Corps badges on cover, plastic bound edgeroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr -
Bendigo Military Museum
Photograph - Army Survey Regiment’s Rifle Shooting Team, Fortuna, Bendigo, c1979
This set of 10 photographs of the Army Survey Regiment’s victorious rifle shooting team was taken outside the Tavern at Fortuna, Bendigo in c1979. The rifle shooting competition was the ‘Irwin Trophy for Shooting’, a contest with the British Army’s 42nd Engineer Regiment, the equivalent military geographic mapping unit at the time to the Army Survey Regiment. The bent .303 rifle seen in photo .3P was retrieved from the bottom of Fortuna’s lake when it was drained for restoration. It is believed an excavator drove over the rifle before it was retrieved.This set of 10 photographs of the Army Survey Regiment’s rifle shooting team was taken at Fortuna, Bendigo in c1979. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The 35mm positive photographic proofs were scanned at 600 dpi. Larger prints of .1P, .3P and .10P were scanned at 300 dpi. .1) & 2) - Photo, black & white, c1979, Rifle Shooting Team - L to R: Warren ‘Waldo’ Shirley, John Waight, Peter Searle UK Exchange, CO LTCOL Bob Skitch, Jim Macdonald, John Harrison, Max Neil, Stan Vote. .3) - Photo, black & white, c1979, Rifle Shooting Team - L to R: Stan Vote, John Harrison, Max Neil, Warren ‘Waldo’ Shirley, Jim Macdonald, John Waight. .4) - Photo, black & white, c1979, Rifle Shooting Team - L to R: CO LTCOL Bob Skitch, Jim Macdonald, Stan Vote. .5) - Photo, black & white, c1979, Rifle Shooting Team - L to R: John Waight, Warren ‘Waldo’ Shirley. .6) - Photo, black & white, c1979, Rifle Shooting Team - L to R: Warren ‘Waldo’ Shirley, CO LTCOL Bob Skitch. .7) - Photo, black & white, c1979, Rifle Shooting Team - L to R: CO LTCOL Bob Skitch, Warren ‘Waldo’ Shirley, Stan Vote, Jim Macdonald, Max Neil. .8) - Photo, black & white, c1979, Rifle Shooting Team - L to R: Jim Macdonald, Max Neil, Stan Vote. .9) - Photo, black & white, c1979, Rifle Shooting Team - L to R: CO LTCOL Bob Skitch, Peter Searle UK Exchange, Warren ‘Waldo’ Shirley. .10) - Photo, black & white, c1979, Irwin Trophy for Shooting..1P to .10P –No personnel are identified.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr -
Bendigo Military Museum
Equipment - Tri punched Film Registration System - stainless steel (studs), Ordinance Factory Bendigo, Circa 1960
These studs (pins) were used in the manual production of mapping to accurately register a number of sheets of film reproduction material together. A set of three studs were required. This simple but effective system allowed the reproduction material layers (repromat) to expand and contract with changes in temperature whilst maintaining the registration between sheets.Precision engineered stainless steel studs (pins) Set of three required for operation, includes a spare stud all stored in a plastic container. These studs were also produced as a low profile version for use in large format photographic vacuum contact frames so that they would not break the glass.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr -
Bendigo Military Museum
Administrative record - An analysis of Royal Australian Survey Corps mapping errors by Major LG Sam Thompson, Major LG Sam Thompson US Army Corps of Engineers at Army Survey Regiment, circa 1978
The purpose of the report is to analyze and study the map making procedures at the Army Survey Regiment to quantify the accuracy of the mapping to see if they meet acceptable accuracy standards. This was achieved through the study of possible errors.A4 loose leaf booklet held together with a "bulldog" paper clip. Cover part of an a RASvy 1:50,000 map. 1x Cover, 7x Introductory pages, 103x report pages.Marked on front cover "X - Box - 13", "TEXT 063"royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr