Used in the 19th centuryAn all steel bit brace made of forged metal with a round knob on the turning handle and a screw to tighten the bit when attached. It was used in the late 19th Centurytools, carpentry tools, woodworking tools, steel

Used in the late 19th centuryA forged steel Bit brace with a large screw to secure the drill bit and a knob at the end of the turning handle. It was used in the late 19th century.on the knob - "10" is stampedsteel, tools, carpentry tools, woodworking tools, cutting tools

Used in the early 20th CenturyAn early 20th Century steel bit brace with a wooden knob on the handle.tools, carpentry tools, woodworking tools, steel

Used in the late or early 20th Century. Could be used to cut steel.A curved steel shaped wooden handled Bow saw with a curved nail puller near the handle. A metal saw blade is attached by a screw at the end where it is fitted. Used in the late 19th or 20th Century.saws, carpentry tools, woodworking tools, tools, steel, wood, metal

Used by the Ockwell family in the late 19th centuryAn 'M' toothed steel hand saw used to saw rough wood or cross cut wood. It has a wooden handle which is rivetted on with four brass rivets. It was used in the late 19th Century.hand tools, woodworking tools, carpentry tools, wood, steel, hand saws, saws, cutting tools

Made approximately 1890An all steel docking saw with a rough toothed blade used to saw rough wood. The steel eight hole decorative patterned handle is rivetted on with two steel rivets. hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools

A Peg tooth forged steel crosscut saw with two wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain. It was used in the late 19th Century.hand tools, woodworking tools, carpentry tools, wood, steel, hand saws, saws, cutting tools, crosscut saws

Used by Edgar R Sebire.A Peg tooth forged steel crosscut saw with two wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain. It was used in the late 19th Century by Edgar R Sebire.hand tools, woodworking tools, carpentry tools, wood, steel, hand saws, saws, cutting tools, crosscut saws

A forged steel fine tooth crosscut saw with no handles. There are four rivet bolts and two round handle holders at each end of the saw. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used by Wandin T SebireA forged steel 'M' toothed crosscut saw with wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.'W' is stamped on the blade.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used in the 19th century.A forged steel narrow bladed double Peg and Rake toothed crosscut saw with no handles. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.Stamped on the saw: made of Simond Steel, Trade mark Reg. Warranted The Simond Saw Est 1832, Simond Steel & Saw co USA. Crescent Ground Steel Mill, Lockport New York. Factories Fitchburg Mass, Montreal Quebec No 325hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used in the 20th century.A handmade rectangular shaped large wooden mallet head and handle. It was used in carpentry to knock wooden pieces together or to drive dowels or chisels. Used in the 20th century.wood, mallets, woodworking tools, striking tools, small wooden hammers

Used in the 19th centuryA two piece large wooden handled Auger or steel drill bit with the insignia 'Hardypick, Sheffield, England' stamped on the top of the drill bit. It was used in the 19th century to drill holes in especially large wood.'Hardypick, Sheffield, England'steel, wood, woodworking tools, carpentry tools, auger bits, augers, cutting tools

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This ruler belonged to Louis Haeusler (b.1878) and is one of the many objects in the Haeusler Collection that represent home and farm life in early twentieth century Wodonga.This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Wooden fold out carpenter ruler with bendable brass hinges and imperial measurements engraved into the wood. Imperial measurements (inches) engraved on arms of ruler. carpentry, carpenter, woodwork, wood, ruler, building, diy, wodonga, farm, haeusler collection

Used by donor's father in Australia.Carpenter's/wood worker's plane - wooden hand grip & wooden knob; screw for adjusting metal blade, metal base plate.'STANLEY' embossed on metal front plate /'BAILEY', No. 4 1/2 on base plate.carpentry, stanley works, woodwork

Used within the Nicholls family.A wooden carpenter's ruler folds into four nine-inch sections with precision made brass hinges.Paper label inscribed 'Please keep. Donated by Harry Nicholls. woodwork, carpentry, rulers, measurement