This costume tail was obtained by Charles Quon, probably from Hong Kong, and used by the Young Chinese League in their processions. This is part of a 'fish warrior' costume.This costume tail is significant for its links to the Chinese Young League. The League was formally established on 4 October 1932 to to promote free social intercourse and goodwill among its members and their mutual improvement. Membership was open to all persons, with one or both parents or grandparents born in China. Wives of Chinese members were permitted as members with the same privileges. It was a significant social organisation for Chinese-Australians in Melbourne in the mid to late twentieth century.'Fish' tail that is attached around the waist decorated with gold scales with a blue trim.young chinese league, melbourne, victoria, australia, processions, costumes

Article from Nunawading Gazette, 20 November 1985 on sighting of yellow tailed black cockatoo in Blackburn South, Mitcham and Nunawading.Article from Nunawading Gazette, 20 November 1985. yellow tailed black cockatoos, birds

A block, jack or smoothing plane is used for making a smooth finish to timber that is used to make furniture or other wooden objects. Traditionally, wood planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the intended shape of the item being worked on. The blade or iron was likewise formed to a flat shape and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers' shop might have many, perhaps hundreds, of smoothing and moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. A vintage tool by an unknown maker, this item was made for cabinet-making firms and individuals that worked in wood and needed a tool that could remove large amounts of timber. These jack, block or dressing planes as they were known came in various shapes and sizes to achieve a flat and even finish to timber surfaces before the use of mechanical smoothing planes and came in many sizes. A significant tool from the late 18th to early 19th century that's pattern or shape is still in use today. Early models of this type of woodworking plane are sought after by collectors today. This tool gives us a snapshot of how furniture and other finishes were created on timber by the use of cutting-edged hand tools used by craftsmen of the time. Tools that were themselves handmade, demonstrating the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce either a decorative or even finish for timber items. Smoothing Plane blade and wedge present. Raised handle at front end. Right-hand wedge guide broken away. Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane, wood plane, cabinet makers tools, furniture making

Model of F4B Phantom fighter, light grey "rising sun" red and white tail. US Air Force white star on blue circle with red and white stripes on decals.S Air Force decals of star with stripes, red and white tail. USS Coral Seamodel, aircraft, f4b phantom

P.I.A.T. practice projectile. 380mm x 85mm, tin, 4 tail fins surrounded by metal band band 80mm diameter, cylindrical shaft 190mm length 30mm diameter housing propellent, explosive housing 380mm diameter, 190mm from top of shaft to detonator cap. Yellow band half way up explosive housing signifying practice round. "INERT" on explosive housing. "LOT 532" on tail fin "H&S" on tail fin

Dress coat - Navy blue colour, cotton twill fabric. Navy blue cotton sateen lining with beige cotton fabric lining to sleeves. Full belt with bakelite and metal buckle. Buttons - black colour bakelite with metal shank. Emblazoned with the King's Crown and a Wedge Tailed Eagle in flight c WW2. Flight Sergeant Crown and Stripes on top sleeves.uniform, raaf, ww2

" Garnet William Charles JACKSON' No. 50970, Enlisted 23/02/1942, Age 28 years. Discharged 18/01/1946. Rank of Flight Sgt in No.73 Operational Base Unit.Dress Coat - navy blue colour, cotton twill fabric, navy blue and beige cotton lining to shoulders and sleeves. Full belt with bakelite and metal buckle. Buttons - black colour bakelite with metal shank. Emblazoned with the Kings Crown and a wedge tailed eagle in flight. WW2. Propellor on sleeves - Leading Aircraftsman. Red stripes on sleeve - years of overseas service.Maker's label - black ink print on label " V93/Made in/ Australia/1944/ Size ".uniform, raaf, ww2, jacket

Eagles on coins do not necessarily indicate that they are American eagles or coins from the United States but they are symbols of strength or power. The 10 Centimes was made at various mints and the mint mark appears as a single or double letter below the eagle.This pattern with Napoleon appears on bronze French coins from 1852 to 1865. This coin reflects the late 19th century history of France.A bronze 1855 French 10 Centimes. The denomination is on the reverse: " DIX CENTIMES" around an eagle with open wings. Above that is: "EMPIRE FRANCAIS" or French Empire. On the obverse is: "NAPOLEON III EMPEREUR BARRE 1855" around the head of man facing left.coin french-ten-centime napoleon

Epaulettes (2) for Flight Lieutenant, summer use, with florentine bronze crown & eagle badge (known as RAAF Officer Eagle; Small). This pair of summer dress uniform epaulettes. The epaulettes are made up of shoulder straps and a tongue sewn underneath each strap. The straps and tongues both have a button hole with sewn edges for attachment to the summer dress tunics. The epaulettes are secured to the tunic by buttons. They have no physical inscriptions or markings but have a badge comprising crown above and eagle done in florentine bronze.

World War 2Triangular pennant made from wool felt. Maroon with blue strip on short side, wirh two blue tags. Greetings from Australia in gold lettering, with gold scroll containing the word Australia. 1943 in red lettering with an eagle in gold holding a rifle and bayonet in its tallons and a green kangaroo wearing a tin helmet and holding a rifle and bayonet.1943. Greetings from Australia. Eagle and kangaroo.

Twin fin surfboard manufactured at Piping Hot Boston Road Torquay. Manufactured from polyurethane foam core and laminated fibreglass with fixed fibreglass fins. Shaped by Mike Patterson. This board is has channels running almost full length on the bottom of the board, the wide point forward of centre, swallow tail with flyer. Custom graphics in red, yellow and green top and bottom; from 1979High performance twin fin designs were pioneered by 4 time Professional World Surfing Champion Mark Richards (Newcastle). In this period 1978 -1981 these surfboards represented the pinnacle of surfboard design progression and high performance. This surfboard also represents Piping Hot which was one of Australia's leading surf 'brands' at that time. Piping Hot was a Torquay based company that produced surfboards,wetsuits and surf clothing. Piping Hot Twin Fin surfboard. Manufactured from polyurethane foam core and laminated fibreglass with fixed fibreglass fins. Full plan shape with channels running almost full length on the bottom of the board, the wide point forward of centre, swallow tail with flyer. Legrope plug fitted. Custom graphics in red, yellow and green top and bottom.20cm x 16cm Black red yellow green Piping Hot logo on deck and bottom 60cm down from nose. Hand written makers mark "Shaped by Mike Patterson Custom" in pencil on blank beside stringer forward of the fins on the bottom. "1459" in pencil on bottom near tail. surfboard, fibreglass, twin fin, piping hot, mike patterson, torquay, channel bottom, fred pyke, rod brooks

Used in wood splitting to split with the grain of the wood. Splitting or stud axe bits are more wedge shaped. This shape causes the axe to rend the fibres of the wood apart, without having to cut through them. Possibly made by Kelly Axe Company after 1949.A wooden handled axe with a flat ended wedge shaped blade for hammering. There is a piece of orange cord threaded through the handle for hanging. Made in USA True temper flint edge.stud-axe tools

Two colour Photograph in black frame 1. Collection of tail fins standing in a large barren area - "Looking for a Bomb" 2. Young man completing bomb fitting. Background shows a truck. "Found one! Fin and Bomb Mated - now for the fuse!"Tail fins looking for a bomb Found one! Fin and bomb mated - now for the fuse!bombs, photograph

A marking gauge, also known as a scratch gauge, is used in woodworking and metalworking to mark out lines for cutting or other operations. The purpose of the gauge is to scribe a line parallel to a reference edge or surface. It is used in joinery and sheet metal work operations. The gauge consists of a beam, a headstock, and a scribing or marking implement, typically a pin, knife, pen or wheel. The headstock slides along the beam and is locked in place by various means: a locking screw, cam lever, or a wedge. The marking implement is fixed to one end of the beam. These types of gauges have been in use for many centuries and have not changed much in their design.An item that has not changed in use since its inception many hundreds of years ago. These types of marking gauges used by cabinet and joinery makers to mark or scribe their work for cutting are still produced and used today in many sizes by professional cabinet makers and individuals.Cabinet makers marking gauge, wooden, adjustable staff secured be a wedge through the block. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cabinet makers tools, woodworking tool, marking gauge, mortise gauge

Plastic scale model of Catalina Flying Boat. Twin engines on high main wing. Camouflage colouring on top of wing & tail wings. White fuselage & under wings. Gun mounted in front of cockpit. Two Rockets under each side of main wing. Gun turrets on each side of fuselage.Each side of fuselage under cockpit: "No 88" Each side of tail fin: "No 1188"military history - souvenirs - air force, passchendaele barracks trust

Assumed used at an Internment campInternment CampLarge spoon, stainless steel, with German Ensignia ( Eagle ) with Swastika underneathEngraved on underside of handle German Eagle Ensignia with Swastika in a circle underneath. T.W.S. 41. Might be a table spoon for measuring or serving spoon. Handle has bevilled edges and is scooped close to spoon bowl. Well used appearance, with scratching from cleaning, dark grey appearance.

This inkwell is part of a collection donated by Mrs. Jean Raper of Wodonga.This item is from Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper. A small inkwell with hinged lid. Inkwells such as these were used by naval officers during World War 1. The mark on the lid has been identified as being of either Austrian or Russian origin. KKA PRIV is an abbeviation for Kaiserlicher Konigslicher Adler Privilig – Imperial Royal Eagle Priviledge. This is said to be the Austro-Hungarian equivalent of ‘By Appointment to Her Majesty’.Engraved on inner cover `K.K.A. Priv" with double headed eagle and anchor.vintage inkwells, writing implements, naval equipment

A book of poems written by Tarlton Rayment at end of WW2.94 Page book of Poems and Drawings. Black writing on cover and faded picture of an eagle in flight. Book faded cream colour with front and back having a red outline. Inside the front cover a message of appreciation and then 7 pages of subscribers. Contents include a detailed prelude and then a series of poems, some with accompanying illustrations.Titled "Eagles and Earthlings - a metrical tribute to Aircrews in War". Tarlton Rayment (Author).poems, aircrews, book

These plaques commemorate the winner of the Warrnambool Brierly Steeplechase in 1965 and 1966. The owner of the horse was Mr D. Wedge, the horse was Regalo from New Zealand and the jockey was N. Rantall. The plaques were originally display items based in areas of the Warrnambool Racecourse. The Brierly Steeplechase was first run in 1902, with the name coming from a local property and homestead established by William McKiernin in the 1850s. Today the Brierly Steeplechase is part of the Warrnambool May Racing Carnival which features the famous Warrnambool Grand Annual Steeplechase. These items relate to a significant part of Warrnambool's sporting and social history..1 This is a rectangular-shaped metal plaque with ten holes on the sides for attachment to a surface using screws. The plaque has been painted yellow with a sketch of jockey silks and cap in blue and pink. Much of the paint is missing and the plaque is rusty and slightly warped. .2 This is a small rectangular-shaped metal plaque with black printing. There are four holes for affixing the plaque to a wall or bench. The plaque is rusty in places. .1 'Regalo (N.Z.)' .2 'Mr D. E. Wedge Regalo (N.Z.) Winner Brierly Steeple 1965,1966' warrnambool racing club, warrnambool may racing carnival

The Superb Lyrebird is a large ground-dwelling bird with powerful legs and long tail. Found in rainforest habitats in southeastern Australia, it forages in leaf litter for food. It has a very powerful song and is known for mimicking other species. The males have spectacular long tail comprising a variety of feather types, where juveniles and females lack the longer tail feathers. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This male Superb Lyrebird is primarily grey/brown. It has striking tail feathers that are white, beige and darker brown that vary in size. Aside from the middle of its tail feathers, the parts of the bird which are darker brown include the top of its head, wings and back. The bird has strong legs and a small beak. This specimen stands upon a wooden platform.taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, superb lyrebird

The Superb Lyrebird is a large ground-dwelling bird with powerful legs and long tail. Found in rainforest habitats in southeastern Australia, it forages in leaf litter for food. It has a very powerful song and is known for mimicking other species. The males have spectacular long tail comprising a variety of feather types, where juveniles and females lack the longer tail feathers. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This male Superb Lyrebird is primarily grey/brown. It has striking tail feathers that are white, beige and darker brown that vary in size. Aside from the middle of its tail feathers, the parts of the bird which are darker brown include the top of its head, wings and back. The bird has strong legs and a small beak. This specimen stands upon a wooden platform. taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, superb lyrebird

Enamelled VAOC Observer badge. Single pin on back. Colours: red circle in centre overlaid with stylised eagle in gold; white surrounding ring and blue outer ring with gold lettering.Front: (Centre) stylised eagle / Observer; (Edge) Volunteer Air Observers Corps. Back: This badge is the / property of the / Department of Air / 27582 / Stokes.vaoc, observer, ww2

The hand forged iron alloy wedge belonged to the railways carpenter, Lachlan McEachern, who became the President of the Wodonga Sub-Branch of the Victorian branch of the Australian Railways Union. He was presented with a framed Past Officers Certificate by the Australian Railways Union in recognition of services rendered in 1926. The certificate is also in the collection of the Wodonga Historical Society. The Wodonga train station opened in November 1873 when the section of the train line from Wangaratta to Wodonga was completed. The expansion of the railways to the northeast of Victoria occurred after the Victorian Government took over the railways in 1867 and the trains serviced large towns such as Seymour, Wangaratta and Wodonga, as well as smaller towns along the way. The hand forged iron alloy wedge has local and state significance due to its use by a Victorian Railways carpenter, Lachlan McEachern, in Wodonga. The local significance is also strong due to the prominence of the McEachern family in the Albury-Wodonga area.Hand forged iron wedge with a cracked flange/rim at the top, red-brown rust and some dirt on the surface.hand forged wedge, hand made tools, victorian railways, v.r., railways carpenter, wodonga, lachlan mceachern, iron alloy tools, mceachern family