Clare Gervasoni was appointed as the Curator: Art & Historical Collections at the University of Ballarat (now federation University Australia. in 2000. A female is photographed in front of a wide landscape. It is Clare Gervasoni in front of Ballarat East.clare gervasoni, portrait, staffmember

In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764.  Company's later years: Both Thomas's sons, James Harper and Thomas Ogilvie were involved in the continuing life of the firm. James followed in his father's footsteps in becoming a local public figure. He was appointed Deputy Lieutenant of the County of the City of Glasgow and was made a deacon of the Incorporation of the Hammermen of Glasgow in 1919. His brother Thomas Ogilvie was recorded as tool manufacturer and employer in the 1911 census. Thomas Ogilvie's son Thomas Alastair Sutherland Ogilvie Mathieson was born in 1908 took a rather different approach to engineering, however, by becoming a racing driver. In 1947 he wed the French film actress Mila Parély. The firm had won many awards at world fairs for their goods. At the Great Exhibition, London, 1851. Prize medal for joiners' tools in the class of Cutlery & Edge Tools, Great London Exposition, 1862. Prize medal honoris causa. International Exhibition, Melbourne, 1880. Gold medal International Exhibition of Industry, Science and Art, Edinburgh, 1886. Prize medalThe firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Jack or Smoothing Plane Size of iron 2 1/4 inches wide.Has GN inside a W stamped for (A Mathieson & Son Glassgow.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jack plane

A dorade is a type of ventilator that permits the passage of air in and out of the cabin or engine room of a boat while keeping rain, spray, and sea wash out. The basic form is a low, rectangular box fixed to the deck or cabin top, fitted with interleaving vertical baffles. The baffles alternate to be free at the floor of the box, or free at the ceiling, forming a series of chambers. A horn-shaped ventilation cowl is usually fitted facing forward to a large hole at the top of the chamber at one end of the box with another large hole opening down into the boat from the chamber at the other end. Limber holes perforate the wall of the box at the floor of each chamber. Dorade boxes operate on the principle that air can pass relatively freely through the chambers, yet rain or sea wash will be trapped in successive chambers and drain out the small holes in the sides of the box. The first appearance of Dorade boxes was on the Olin Stephens-designed Dorade, a yacht built in 1929 for ocean racing. As originally built, the Dorade's vents led directly below, but this was found to allow water below, and the vents were modified in the early 1930s.An early piece of marine equipment from the 1930s and 40s that still is in use today on smaller vessels and ships.Dorade Cowl (Ventilator), brass casting with wide open mouth twisted to side. Painted red inside.warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, dorade (ventilator), dorade, ventilator, marine equipment, ships fittings

Depth gauge, J. Heath stamped on the end, 88mm long, 18mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Pincers metal joined at fulcrum with a rivet. 165mm long x 25mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

TROVE : The Ballarat Star (Vic. : 1865 - 1924) Wednesday 20 October 1920 p 7 Article 'A LITTLE DOCTOR FOR DYSPEPTICS If you want quick relief from the pains and distress of indigestion, dyspepsia, food fermentation and acidity, just take two or three little tablets of Bisurated Magnesia after eating or whenever pain is felt. Bisurnted Magnesia tablets are absolutely harmless, and enable the dyspeptic to enjoy a good- old-fashioned meal with out fear of pain or distress to follow. That’s why Bisurated Magnesia is called “The Little Doctor for Dyspeptics.” . Go to the nearest chemist and get a packet of Bisurated Magnesia tablets to-day; he sells them in handy flasks at small cost, and with every one is included a. binding guarantee of satisfaction or refund of money. Thus, unless this “Little Doctor” gives you the benefit you desire, you pay him nothing. Bisurated Magnesia is also obtainable in powder form. Beware of substitutes. Look for the maker’s name—Bismag. Ltd., which appears on every .genuine package'. Advertisement in 'The Illustrated London News' 22 July, 1916, page 117. '96 out of 100 dyspeptics have Acid stomachs'. BISMAG LTD, 212-214 Great Portland St., London W. Round clear glass bottle with wide neck and text embossed on side and base. 'BISATURATED MAGNESIA BISMAG LTD LONDON' on side. 'B' over 'I' on base.bisaturated magnesia, bismag, magnesia

Rectangular pale aqua tinted clear glass bottle with a short wide neck.nil

Painted and used at Internment camp 3.Watercolour painting of "Cairo Courtyard" on wooden board, wide brown wooden frameC. Rippert. On back: "Numurkah Butter Factory, Victoria, Australia. 54 lbs nett. Produced in the district of Numurkah. "Pure Creamery Butter". G. Glockemann - Hornsby. On a sticker "Gemalde" Von Frau Rippert Ruckseite Des Bildes Von Historischem Interesse. Frau Charlotte Rippert, the artist, was a German Lutheran Missionary in Egypt in the 1930's. Interned by British in Cairo and transported to Australia on the Queen Elizabeth, arriving in Sydney, 31 August 1941.c. rippert, internment camp 3, internment camp artists, glockmann family, charlotte rippert

Leather satchel with three wide straps, compartments to hold paper, pens, etc.Championpersonal effects, travel goods

Iron axe head with wide end with hole for handle and the other thinned and sharpened.trades, tools

Wide wooden piece padded at one end and four sharp points at the other.trades, upholstering

White Lawn Collar with three wide pieces. White flower embroidered on points.costume accessories, collar accessories

EPMS Cylindrical Trophy 2 Heart shaped handles with wider base with engravingEngraving 3rd M.D SPORTS /Lloyd Lindsay / 1st / TPR J.G. GIBBS 8 L.H / 1932trophy, presentation, 1932, lloyd lindsay, tpr j.g.gibbs

Womens wide brim soft felt, khaki. AAMWC (belonged to L. Steinberg)headgear, ww2, army

The Kew Historical Society’s fashion and design collection is comprised of costumes, hats, shoes and personal accessories. Many of these items were purchased or handmade in Victoria; some locally in Kew. The extensive hat collection comprises items dating from the 1860s to the 1970s. Most of the hats in the collection were created by milliners for women. There are however a number of early and important men’s hats in the collection. The headwear collection is particularly significant in that it includes the work of notable Australian and international milliners.Wide brimmed black coloured straw hat with net and black fabric flowers.hats, fashion accessories, fashion and textile collection, women's clothing

The Kew Historical Society’s fashion and design collection is comprised of costumes, hats, shoes and personal accessories. Many of these items were purchased or handmade in Victoria; some locally in Kew. The extensive hat collection comprises items dating from the 1860s to the 1970s. While most of the hats in the collection were created by milliners for women, there are a number of early and important men’s hats in the collection. The headwear collection is particularly significant in that it includes the work of notable Australian and international milliners.Wide brimmed simulated straw summer hat decorated with silk and a fabric rose.Label: Da-Me. Made in Italy. Viscoseda-me, women's clothing -- hats, sun hats, headwear

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. This dress is one of a number of items donated to the Fashion Collection by Dione McIntyre.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s. Grey flannel wool dress with a wide collar and elbow length squared sleeveswomen's clothing, australian fashion - 1960s, mcintyre collection, dresses

Two-toned pottery jay with ridged neck and wide opening. No maker's marks.containers, pottery, ceramics

Part of S E Surman collection (album) page 37 lower right.Sepia portrait of a bearded man with receding hairline, wearing suit with wide tie.mr wearne, surman collection

Street Scene Clifton Avenue Stawell looking towards Barnes Street. Photo taken before the pine tree were removed.Black and white photograph of a wide street with trees lining the street, houses in the background.stawell

The flag is 810mm wide x 710mm high. The red disc is 410mm in diameter.Surrounding the red disc are signatures of friends, relatives and companions.

On reverse: Tiros II - Mounted for camera calibration. Wide angle camera lens protrudes at upper right.alan gardiner collection, space industry, 1960, satellite, tiros ii

Items in the Kenneth Frederick Bawden RAAF No 250882 collection, refer cat No 213.109POne pair RAAF Epaulettes for the rank of Squadron Leader. Dark blue tab. Two Light blue stripes with dark crinkly backgrounds 13 mm wide. One Silver stripe with black background 7 mm wide.Sewn to a tab on a piece of khaki cloth: “5-4171 BAWDEN F5T”uniforms - air force, costume accessories - male, numismatics - badges

T Rabbet Plane, iron and wedge intact. Body has the shape of an inverted "T" with the sole wider than the stock. Iron is 1 3/8 inches wide. Stamped A.Stevenson, GN inside a W and made by Inglis.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, t rabbet plane, a.stevenson

"Cherry and Sons Pty Ltd", dates this churn to post 1904. In 1858, Edward Cherry began making butter churns in his spare time. Thisi became a full time business with the first factory opening in Gisborne in 1875, using imported NZ kauri pine. Steam was used to bend the base and then it was 12 months drying time before the churn was available for sale. Edward died in 1909 and the business was taken over by his son George until his death in 1917. During the polio epidemic in the 1930's, the company also made respirators. The company closed iin the 1970's.A wooden butter churn with handle and lid. the handle turns a spoked wooden paddle inside to make butter. It is a light brown colour, 30 centimetres high, 32 centimetres long and 21 centimetres wide. The wooden handle on the outside of the box is nine centimetres long three and a half centimetres wide tapering to one and a half centimetres wide, it's attached to a piece of metal that's 13 centimetres long, one and a half centimetres wide and half a centimetre thick. This is attached to a metal rod one centimetre in diameter that goes through the box and is attached to the other side of the box. A wooden frame 24 centimetres by 18 centimetres with two one centimetre wide pieces inside it is attached to the rod.CHERRY & SONS PTY. LTD. GISBORNE VICTORIA T1 Directions for use butter churn, cherry and sons pty ltd