Photograph was taken out the front of a hotel in Beechworth, possibly the Empire Hotel. Depicted are several men, guns, and a boat. Opposite corner is a butcher shop.Black and white rectangular photograph printed on matte photographic paper.Obverse: Butcher/ E. Spencer/ Butcher Reverse: 7632 'The Butchers Arms'/ about 1900/ opposite Benevolent asylum. hotels album, beechworth, burke museum, butcher, e. spencer

This glass door insert is one of a pair previously inserted into the entrance doors to the Shire of Diamond Valley offices in Greensborough. The Shire of Diamond Valley was a Local Government Area located about 20 kilometres northeast of Melbourne. The shire covered an area of 74.38 square kilometres and existed from 30/09/1964 until 1994. After the local government mergers of 1994, the Shire of Diamond Valley offices were used by the Nillumbik Council.This etched glass is a reminder of the Shire of Diamond Valley. As a large piece of glass it is fragile and could have easily been lost or broken when the Diamond Valley offices changed ownership.Clear glass door insert. Etched with insignia of Shire of Diamond Valley.Glass is etched with the coat of arms of the Shire of Diamond Valley surrounded by inscription 'Shire of Diamond Valley. Proclaimed 1964'.shire of diamond valley, emblems, glass etching, local government buildings, door panels

Hard back with dust cover Author Kenneth Macksey Publisher Arms and Armour Press London 1979 ISBN 0 85368 232 1

This item is part of the collection of Ecclesiastical Linen once used by St. Andrews Anglican Church on the corner of the Esplanade and 14 Drummond St, Dennington, Victoria. The first Anglican service was conducted on December 22nd, 1907. The church was decommissioned in January 2003. This item is part of the Ecclesiastical Linen collection, which is significant for its examples of handworked embroidery and drawn-thread work from the early 20th century. The items are also examples of a collection used for religious services during this period. The Ecclesiastical Linen is also significant for its association with the early development of the local township of Dennington and the importance the the community of setting aside land in the 1850's for the purpose of religious worship. The Ecclesiastical Linen is also significant for its connection to St Andrews Anglican Church, Dennington. The church was funded and attended by the local community in the early 1900's and is now listed on the Victorian Heritage Database (VHD 118083) as a building of historical and social significance. Priest's scarf, part of a set of Ecclesiastical Linen once used in St. Andrew's Anglican Church, Dennington, Victoria, between the years 1907 and 2003. The rectangle of lined coarse white fabric is slightly flared at the ends, which are finished with a white twisted cotton fringe. Three cross symbols, one at each end and one in the centre, have been handworked in white ribbon with gold-coloured edging and gold embroidery in the form of rows of small crosse.. Three embroidered symbols [ribbon cross with gold-coloured borders and small gold coloured crosses along the arms]flagstaff hill, warrnambool, maritime museum, shipwreck coast, great ocean road, st andrews anglican church dennington, dennington church, warrnambool church 1907, ecclesiastical linen, communion linen, hand worked linen, religious service, religious ceremony, ceremonial linen, needlework, embroidered, applique, cross symbol, priest's scarf

Clothing. Men's cream coloured cotton formal dress shirt. Stiffened bib front (27 cm X 38 cm) with pleats and pin tucks. Centre front placket (35 cm) with 7 cm button holed tab at lower end. Front opening fastened with three buttons and button holes (two buttons missing). Double button holes on 2 cm stand up collar. Body of shirt gathered into yoke at centre back. Long straight sleeves with 7 cm stiffened cuff with button holes for cuff links.Tag inside back neck. Coat of Arms, ''Fdad' Aluisio Napoli'' Red hand stitched laundry mark.costume, male, men's cream coloured dress shirt

Medal commemorating the centenary of the establishment of a settlement on Bendigo Creek. (.1) Small, circular, gold pin with blue and green enamel. below. (.2) Seventeen numbered paper envelopes containing single pin.Face of pin has the City of Bendigo Coat of Arms in relief with 'City of Bendigo' above and 'Centenary 1851 - 1961' city of greater bendigo medals

Identification tag for Mr Thomas W. GaudionRound silver I.D. tag with leather strapRear - "5692 T.W. Gaudion 5th Btn A.I.F. Meth" Front - "Advance Australia" with Australian Coat of Armsidentity badges, australian imperial force, world war one

"Stop the nuclear arms race - Walker." Article about the Walkers being awarded the World Methodist Peace Prize for 1986.B & W photograph of Sir Alan and Lady Winifred Walker standing together.C&N identification.walker, alan, walker, winifred, world methodist peace award

"Stop the nuclear arms race - Walker." Article about the Walkers being awarded the World Methodist Peace Prize for 1986.B & W waist length photograph of Sir Alan and Lady Winifred WalkerC&N identification.walker, alan, walker, winifred, world methodist peace award

The plaque depicts the Coat of Arms of the Australian Artillery Association. English meaning of the Latin Motto is "Whither right and glory lead".Metal and Timber Plaque.Metal shield of Dark Blue with light blue and red lightning flashes. Central depiction of a cannon with crown above. Inscribed "UBIQUE" with "QUO FAS ET GLORIA DUCUNT". Gold Bar under with inscription " III AD BTY (LT) RAA".

Shows Joe Kellett, George Brooks bricklayer (With arms folded) and Sam Turner on left. Brooks also on the Arch of Victory.kellett contractors, market hotel, joe kellett, george brooks, sam turner, construction, work, persons

The origins of the rising sun badge are disputed. Rising sun designs had appeared on early Australian colonial coins and military insignia decades before the federation of the Australian colonies in 1901, and may have represented the image of Australia as 'a young nation' and a 'new Britannia'.[2] As early as the 1820s, the symbol of a 'rising sun' was used by various progressive organisations, loosely characterised under the banner "Advance Australia". The rising sun crest used in the New South Wales colonial and State crests was taken from the crest used on the first Advance Australia Arms, circa 1821, and consistently since then.[3] The oldest known example is the 'Advance Australia' coat of arms. The 'Advance Australia Arms' (named because of the motto inscription) became widely used in New South Wales and the neighbouring colonies by private corporations and individuals. Although they never had any official status, they formed the basis for several official coats of arms, including the New South Wales coat of arms. The representation below was reputedly painted for Thomas Silk, the son of the captain of the Prince of Orange, a convict ship that visited Sydney in 1821. The symbol struck a chord with the pre-federation population and many examples still exist on colonial architecture.[4] Proudly worn by soldiers of the 1st and 2nd Australian Imperial Force in both World Wars, the 'Rising Sun' badge has become an integral part of the digger tradition. The distinctive shape of the badge, worn on the upturned side of a slouch hat, is commonly identified with the spirit of Anzac.Glass covered Rectangular Picture Frame showing the Evolution of the Rising Sun Badge of the Australian Army.Gives a brief rundown on the Evolution of Rising Sun Badge with 12 examples and explanatory notes

Photo (and copy) of six men picking up peas on the Breen farm in the 1930s. Five men are wearing hats. They are all wearing waistcoats. On the right of the photo is a square container.

Used by donors for polishing wooden and lino floor in the 1950s and 1960s in their home at 16 McDowall Street, Mitcham.Three brush 'Electrolux' floor Polisher/ Scrubber with polish container and three scrubber brushes, and a remotely operated polish container. It has a 'tee' shape handle which is adjustable in height to polish under tables etc. There is provision for attaching a polish container to the polisher. Flow of polish ie regulated by a chain attached to handle. Handle also has clips for holding the power cord when stored. Body of polisher is squat triangular- shape finished in red and gunmetal grey. There is a heavy rubber skirt surrounding the area where the brushes rotate.|Model B9 Serial CME 6005498 on plate at back.Electrolux Made in Australia - plate at front|Electrolux insignia on front|Plate at back gives power details and serial number.domestic items, cleaning

This container is part of a collection of retail packaging, domestic goods, tinplate, made for Bushells, Australia, 1908-1940 In the mid-nineteenth century custom branded tins developed as a tasteful form of advertising. They were often cheap and decorative and found their way into households as gifts, often being kept as ornaments and storage boxes.They have survived well in many homes. This tea caddy is an example of an Australian branded item used in local households. Rectangular metal storage tin printed with scenery of a tea plantation, hills, women carrying baskets and carts. At the top of the front face is the word 'PEEL'. A small cylindrical lid fits on a short neck on the top. Printed around the lid and base is information about Bushells.lid: "Bushells makes 40 more cups to the pound. On bottom: "Net 1lb wt; No.144 - guaranteed under the Pure Food Act; NSW; 1908 by Bushells , Ltd, No.144"

Handmade toilet bag. Example of container for personal items. Donated by Heather McNamara - worked by Isobel McNamara.Cotton cream drawstring toilet bag for brush & comb.toilet bag, frush & comb container, cotton, embroidered

Black and White Photograph of S.S Casino taken 1930-1932. The Casino is berthed at the Warrnambool Breakwater, either loading or unloading. A person is attending a container at the bottom of a ramp between ship to Breakwater. People are sitting or standing on the Breakwater. The S.S. Casino was a passenger and freight steamer built in Dundee, Scotland, in 1882 for the Newcastle and Hunter River Steam Navigation Company of N.S.W. She weighed 425 tons gross with a length of 160.4 feet, beam of 24.1 feet and depth of 10.2 feet. She had saloon accommodation for 35 people, forecabin for 25 more people, and she carried 300 tons of cargo. While on her delivery journey on May 30th 1882 the S.S. Casino called in at the Port of Warrnambool for coal ., narrowly escaping going ashore in gale force winds due to the quick action of the pilot. At that time, still at anchor, she impressed the directors of the Belfast and Koroit Steam Navigation Company so much that they bought her immediately; she was ideal for trade in along the West Coast of Victoria. (Belfast is the original name for Port Fairy, South West Victoria. The Belfast and Koroit Steam Navigation Company was first managed by Messers. Saltau and Osburne and after the passing of Mr. Osburne, by produce merchants Messers H. Sautau and Sons, whose had a hay and corn store and shipping agency was on the corner of Liebig and Koroit Streets in Warrnambool. ) The S.S. Casino became “the most famous steamer to operate in Victorian waters along the West Coast” by author Jack Loney. Captain Boyd was her first Master, followed by Captain Chapman, who stayed with her 1890 until 1924. Captain W. Robertson followed for a short term, then Captain Middleton then took command 1925 - 1932. The S.S. Casino had several mishaps during her life. One was on 3rd January 1898 when she collided with the S.S. Flinders in Apollo Bay with minor damage. Another was on 24th October 1924 when she grounded on a reef at Point Hawdon near Grey River and most of her cargo (of Christmas goods) had to be dumped into the sea. Then in February 1929 she was ‘holed’ when she struck a submerged object as she entered Lady Bay, Warrnambool. On the morning of 10th July 1932, after attempting to berth at Apollo Bay jetty in heavy seas, Captain Middleton decided to take her out into the bay and wait until the seas abated. It was not realised that the anchor used to steady her as she manoeuvred to her berth had pierced her hull. She put about and headed for the beach but sank. Captain Middleton and nine others lost their lives; nine people were rescued including the two female passengers . Captain Middleton had been in charge of the S.S. Casino for seven years. He was the first ship’s Master to lose his life through shipwreck in the West Coast trade. In the years following the turn of the century the S.S. Casino remained the only regular trader with normal passenger accommodation along the West Coast. From 1882 she had made at least 2,500 voyages on the one run. Flagstaff Hill’s collection has a photograph of a portrait of Captain Chapman, , a ship model of the S.S. Casino that shows both forms of power under which she sailed, steam and sail. The ship is painted green and flies three flags. The inscription across the case of the ship model, incorrectly dated, tells the sad story of the wreck of the ship and the loss of lives on July 10th 1932 at Apollo Bay. A print in the Collection show S.S. Casino underway in heavy sea off Point Lonsdale, another two photographs show her at the Port of Warrnambool, leaving from the Breakwater in Lady Bay and another identifies the S.S. Casino as a ship from the Belfast and Koroit Steam Navigation Company. (Belfast is the original name for the township of Port Fairy). This object is significant because of its association with the coastal trader S.S. Casino 1882-1932 and its significance to trade along Victoria's West Coast in the late 19th and early 20th century. The wreck of the S.S. Casino is considered an important part of Victorian and Australian cultural heritage and as such has been declared and protected as an Historic Shipwreck under State and Commonwealth Law in the Commonwealth Historic Shipwrecks Act (1976). Black and White Photograph of S.S Casino taken 1930-1932. The Casino is berthed at the Warrnambool Breakwater, either loading or unloading. A person is attending a container at the bottom of a ramp between ship to Breakwater. People are sitting or standing on the Breakwater.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, newcastle and hunter river steam navigation company, belfast and koroit steam navigation company, h. sautau and sons, s.s. casino, west coast trader s.s. casino, victorian coastal trader, captain boyd, captain w. robertson, captain chapman, captain middleton, apollo bay shipwreck, s.s. casino at lady bay warrnambool, saltau and osburne

The anchor is one of four that were carried by the FALLS OF HALLADALE when she was wrecked near Peterborough in 1908. This Rodger’s Anchor was raised from the wreck site by Flagstaff Hill divers (Peter Ronald, Colin Goodall and Gary Hayden) in 1974 and is on permanent outdoor display at the Maritime Village. The imposing 2-tonne artefact required a raft of fourteen 44-gallon drums to raise it from the seabed before it was towed by a crayfish boat to the wharf crane at Port Campbell for loading onto land transport. Following Lieutenant William Rodger’s patent in 1831, anchor design moved away from the separate attachment of straight arms and flat flutes to each side of a long shaft. Rodger’s innovation included the forging of both arms and their flutes as a single uniformly curved piece which was then attached to the crown of the shank by a thick horizontal bolt. The two-inch diameter hole for the securing through-bolt at the crown is clearly visible in this example, the bolt dislodged by corrosion and now missing. The FALLS OF HALLADALE was a four-masted, iron-hulled barque, built by Russell and Co at Greenock in 1866 for the Falls Line of Wright & Breakenridge, Glasgow. The ship was 275 feet long, 42 feet wide, with a 24 feet draft and weighed 2,085 tonnes. She was built to carry as much cargo as possible rather than for speed. Her unmistakably square bilge earned her the title of “warehouse-type” ship and her iron masts and wire rigging enabled her to maintain full sail even in gale conditions. In 1908, with new sails, 29 crew, and 2800 tons of cargo in her hold, the FALLS OF HALLADALE left New York, bound for Melbourne and Sydney via the Cape of Good Hope. 102 days later, at 3 am on the 14th of November, under full sail and in calm seas, with a six knots breeze behind and a misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a shelf of rock near Peterborough. There she stayed for nearly two months until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000-ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four-masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for the Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire.The shipwreck of the FALLS OF HALLADALE is of state significance – Victorian Heritage Register No. S255. She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).A large iron Rodger’s anchor recovered from the wreck of the FALLS OF HALLADALE. It has a rounded crown, curved arms and moulded flutes. Heavy duty iron stock with round eyes at either end, fitted over shank and fixed into position by a wedge-shaped metal locking pin. Shackle missing but severed securing bolt remaining in shank. The presence of an empty bolthole at the crown junction of shank and arms confirms Rodger’s type. Corroded from 66 years submersion in seawater but otherwise structure is sound.warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, falls of halladale, rodger’s anchor, peterborough reef, 1908 shipwreck, anchor, last days of sail, great clipper ships

Black and white photocopy of a photo of part of Lewis Dunstans Store Cnr Arms & Bennet Streets. Parts of copy very dark. Name is painted on the building as well as many of the wares they sold. Staff and men on horses are standing in front of the store. Printed on white paper is - Lewis Dunstans Store Cnr Arms & Bennet Streets. A larger copy is shown on 11010.114.bendigo, history, long gully history group, the long gully history group - lewis dunstans store cnr arms & bennet streets

Object. Brass coloured medal with 1.5 mm hole drilled near top edge. Obverse:Australian Coat of Arms. Kangaroo and emu have their heads turned. Engraved around edge. ''Promote Federation & Prosperity'', Underneath Coat of Arms ''1899''. Reverse: Laurel leaves around the edge. Map of Australia in the centre with ''1899''. Engraved around map ''Australia's Commonwealth''.numismatics, badges-commemorative, promote federation medal1899

Adenoid curettes are used to remove infected or inflamed adenoids. Their sharp inner blade removes the adenoid in an atraumatic manner without causing harm to the surrounding tissues.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal curette (surgical scraping tool). Consists of a handle section with divots for ergonomic finger grip, and a straight, thin metal shaft which forks into two small arms with a cutting blade between them at the tips. The arms at the end of the shaft are curved so that the blade is perpendicular to the shaft of the instrument. Shaft of the curette is engraved with the text 'MEDICAL SUPPLY DEPOT''MEDICAL SUPPLY DEPOT'surgery

Worn by an Australian Navy Warrant OfficerJacket Double Breasted Service Dress Navy Blue with rank insignia, [ Warrant Officer] on lower arms; on the upper arms; shoulder flashes with gold embroided word, "Australia" on both shoulders. 8 gold button with embossed Australian Navy Emblem and the word "Australia" in parallel columns of 4. Size 109R. Manufacturer's identification label on inside right breast.Inscriptions inside pocket 8405.66.132.2318 size.109R match. ADI logo. 5114147 Baumgarton. Trouser size.99R 70% 30% Wool/Poly. Dry clean onlywarrant officer navy australian senior service

This item is part of the Dodgson Collection, which was bequeathed to Queen's College in 1892 by the Rev. James Dodgson. The collection was created by Aquila Dodgson, brother of James. Aquila Dodgson was a friend of the English Egyptologist Flinders Petrie, and it was through this friendship the Aquila was able to acquire ancient Egyptian artefacts. A detailed study of the collection was made by Christine Elias "Discovering Egypt: Egyptian Antiquities at the University of Melbourne", M.A. thesis 2010.Upper half, feet and band running down front of figure is yellow outlined in red. Face, wig and hieroglyphs on front in black, crossed arms holding implements in red. On back across shoulders representation of a basket and outline of arms in red. Yellow on upper half and on feet on back of figure. Small paper label inscribed with 'A9' attached to back.james dodgson, aquila dodgson, flinders petrie, wood, shabti

The Union commenced as the Australian Tramway Employees Association in 1910. Changed its name in 1934 to the "Aust Tramway & Motor Omnibus Employees Association" so as to incorporate bus drivers of motor omnibuses. Union members were issued with badges to indicate their membership. They were permitted to be worn on their uniforms. See item 5943 for another example. Wearing of Union badges in Brisbane Tramways was a major source of industrial action in 2012 - see "One American too many" by David Burke, published 2012 by the Queensland Museum.Demonstrates a badge issued to members of the ATEABadge - Australian Tramway Employees Association (Tramways Union) badge. Badge made on a brass backing with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. tramways, trams, badges, personnel, unions, employees, atea

A yellowed clear plastic rectangular shaped container with embossed inscriptions on the lid. The container contains 5 packets of food rations. The largest packet is rectangular in shape and composed of brown paper. It has inscriptions on the front which detail the ingredients within. The second largest packet is also rectangular in shape and composed of brown cardboard. It also has inscriptions on the front detailing the indredients within.......

Has the final SECV (1990's) "sun rays" logo and the statement "You've got a friend at the SEC". The reference gives information on the revival of the SECV as a State Government entity in 2023.Demonstrates SECV stationary and gifts.Plastic biro or pen consisting of outside holder with button to engage with the metal ink container and spring and screwed base that contains the moveable part. Coloured externally black and white. Has the logo of the State Electricity Commission (1980's, 1990s"). Brass ink container marked with a swan, Orthello Germany. Would have been made with a pocket clip, this has broken off.secv, power supply, pens, souvenirs, btm

There were hundreds of kilometers of tunnels and the Viet Cong used them for living and sleeping quarters, hospitals, arms factories and storage depots. Diorama of Viet Cong tunnel system over four levels in cut away aspectBrass plaque - Manufactured by members of the North West Sub Branch Education Team. P. Austin, J. Forster, M. Zukowski, G .O'Donovan. Presented to the VVAA Museum by the members of the North West Sub Branch, Melbourne. Vietnam Veteran's Association of Australia.diorama, tunnels, tunnel rats, viet cong, cu chi

‘The Art of the Japanese Package’ was an exhibition that toured to 10 Australian and 11 New Zealand public galleries in 1979 and 1980. The touring exhibition comprised 221 objects of traditional Japanese packaging which extended from ceramics, wood and paper to woven fibre containers. At the conclusion of the tour, The Japan Foundation and the Crafts Board of the Australia Council donated the vast majority of the exhibition to the Ararat Gallery for its permanent collection. Combining the natural qualities of bamboo, paper and straw with delicate craftsmanship, these unique objects express Japanese aesthetics as applied through fibre crafts. In Japan, the qualities and traits of natural materials are exploited rather than hidden. The texture of straw, the septa of bamboo are not concealed but lovingly incorporated into the whole. In 1979 Hideyuki Oka, curator of ‘The Art of the Japanese Package’ wrote: “In no way self-conscious or assertive, these wrappings have an artless and obedient air that greatly moves the modern viewer. They are whispered evidence of the Japanese ability to create beauty from the simplest products of nature. They also teach us that wisdom and feeling are especially important in packaging because these qualities, or the lack of them, are almost immediately apparent. What is the use of a package if it shows no feeling?” The descriptions of the featured objects were written by Hideyuki Oka, curator of ‘The Art of the Japanese Package’, 1979. Gift of the Japan-Australia Foundation and the Crafts Board of the Australia Council, 1981Baskets of closely woven bamboo are used to package miso (soybean paste) from the city of Aizu Wakamatsu. Ordinarily, miso is sold in containers of pottery or wood, but these packages are unusual for another reason. The soup made with miso must be strained through a bamboo sieve if it is not to be lumpy, and these baskets may be used as sieves. Here two baskets are bound together to make a package of uncommon charm. - Professor Hideyuki Oka, curator.japanese art, japanese packaging, tsutsumi, gift giving