Black and white photograph of an anaesthetic machine, likely to be a portable Foregger anaesthesia apparatus. Flowmeters with glass cylinders including Oxygen and Nitrous Oxide sit on a metal benchtop of a trolley with two drawers. A glass vaporiser is attached undernath the metal benchtop and there are metal valves attached on either side of the benchtop.anaesthetic apparatus, anaesthetic machine, foregger anaesthesia apparatus, flowmeter

This mikiphone has an approximate manufacture date of circa 1926. It is stamped in the interior with the maker’s mark of Palliard Cie (St Croix), who partnered with the patent owners, Nicolas and Etienne Vadasz for the large scale production of the mikiphones. A Mikiphone – or Pocket Phonograph is one of the earliest versions of a portable music player. The Mikiphone was small enough to fit into a pocket for portability, and once unpacked had the ability to play 10” records. Power was supplied to the unit by a small hand crank, and sound was amplified by a small resonator. It is estimated that 100,000 to 180,000 of the units were made between 1924 and 1927. Luxury editions were also available with either a gold or silver casing. Le Corbusier is quoted as saying he could ‘see in the Mikiphone the essence of Esprit Nouveau’. The pocket gramophone is significant for historical and social reasons. It is primarily an enabler of leisure activities due to its portability and size. The design of the object is also significant as it showcases design advancements in the early part of the 20th century. The Swiss made "Mikiphone", the smallest talking machine ever placed on the market folded up to the size of a large pocket watch or small cheese case. Production stopped in 1927. A total of 180,000 were made. A few were made in a luxury version with gold or silver case for a "Pretentious clientele".Inside on dial: Mikiphone / Pocket Phonograph / Swiss made / System Vadasz. Outside: Pocket Phonograph / Mikiphone / System Vadosz / Patented in all countries.pocket phonograph, mikiphone, gramophone, pocket, music player, swiss made, switzerland

Was used by owner until concerned that children may have hurt themselves on the wringerSimpson electric washing machine with wringer attached above bowl. White, round with removable lid. Front lever: Wash/Stop; three buttons on front: Empty-Wash-Off indicated. Appliance on castors attached wringer with metal drip tray and two rubber rollers. Wringer will pivot.Simpsondomestic items, laundering, electrical technology, appliances & accessories

Worn by the donor's motherMachine knitted, brown and cream short sleeved dress and waist length, long sleeved jacket. Dress brown with cream pattern; polo necked, A line with inverted pleat at front of skirt, zip down back. Jacket Chanel style: brown with cream trim at neckline and along facingJoan Knitscostume, female

From the estate of the late Jean Ord, mother of the donor.A large square table mat with scalloped machined edging. Decorated with large blue satin stitch roses in diagonal corners with green outline leaves. In the other corners are blue chain stitch daises with yellow centres and green chain stitch leaves all lined with blue stem stitch.manchester, table linen, handcrafts, embroidery

An item forming part of a collection of costumes, photographs and documents relating to the Weir family who lived in the mansion originally named Illapa, 84 Princess Street, Kew, from c.1917 to 1950. This historically significant collection includes items relating to both George Weir (1866-1937) and his wife Edith Mary Weir (1867-1948). George Weir attained national prominence in the mining industry, becoming General Manager of the North Broken Hill Silver Mining Company in 1903 (later renamed North Broken Hill Mining Company 1905-12, and North Broken Hill Ltd 1912-1988), and subsequently President of the Mine Owners Association. He was to remain General Manager of North Broken Hill Ltd until his retirement in 1926.This garment is part of a collection of women’s clothing, owned and worn by Edith Mary Weir (nee Betteridge) - born in Clare, South Australia 1867, died Kew 1948 - and also by her daughter. The garments date from the 1880s to the 1930s. The collection includes day dresses, evening dresses, evening coats, capes, and undergarments. As the wife and daughter of a mine manager, the collection includes representative examples of clothing worn by upper middle class Australian women in domestic circumstances, and at social and civic events. A number of the costumes from the 1920s to the 1930s are of a particularly fine quality, being both rare, representative and intact examples of Australian fashion of the period. The garments in the Weir Collection were donated to the Kew Historical Society by a granddaughter of Edith Weir in 2017.Long black crepe de chine and lace dress. The multi-layered dress includes extensive panels of black machine lace. It has long sleeves, again with panels of lace. The dress is buttoned at the back with buttons covered with the same fabric. The dress includes a separate long black slip.edith mary weir (nee betteridge), weir collection, australian fashion - melbourne - 1930s, evening dresses

A black and white photograph of a Seven Platoon, Charlie Company, 4th Battalion/New Sealand (ANZAC), Royal Australian Regiment, number two on the M60 machine gun, patrols through close country on Operation Federal. the bullet belts for the m60 are twined about his body to distribute the weight.photograph, long binh, operation federal, 7 platoon, c coy, 4rar nz, gibbons collection catalogue, m60 machine gun, charlie company

Hand made woollen tapestry (could be machine made) of a Zoo horse drawn Tram framed within a wooden frame. Paper backing with a cotton hanging strip stapled into the sides of the frame. Frame by the Glen Waverley Picture Framing, 698 High St Road, Glen Waverley. C1980.On rear in ink at the top - "Donated to Hawthorn Tram Museum Feb. 19th 2012 Ron Scholten"trams, tramways, zoo tram, tapestry, souvenirs, memorabilia, tram 100

Combing removes the short or broken fibres and draws out the long fibres into even strands suitable for spinning. The process is necessary to produce long and soft strands needed for worsted yarn. These machines remove the short fibres and blend the remaining long fibres together to form the top. The short fibres that are removed, known as the noil, are used in the woollen system. The long fibres are drawn together, ready for spinning. To retain as many of the valuable long fibres as possible, a skilled operator always needed to be on duty in the factory to precisely set the machine. A Nobel Comb separates short (Noils) fibres while also blending long (Tops) fibres together. The long fibres are used for worsted materials while the short fibres are used for woollen fabrics. Woollen materials are soft, bulky and fuzzy, such as a picnic blanket; whereas worsted materials are fine, smooth and crisp, such as a suit jacket. The Valley Worsted Mills in Geelong, now the Little Creatures Brewery, ran 12 noble combs up until 1981. Gold plaque on display with machine until 2018 read: G.H. Mitchell & Son, Adelaide have celebrated 125 Years of involvement with the Australian Wool Processing Industry by contributing the funds necessary to restore The Carding Machine, Noble Comb & The Gill Box.Noble Comb with plates - 'Prince Smith & Sons, Burlington Shed, Keishley' (One plate located on each gear box). 'Prince Smith & Sons, Burlington Shed, Keishley' (One plate located on each gear box).wool manufacturing, noble comb, textile industry, geelong, little creatures brewery, valley worsted mills, fibres, wool, factory

These saws date from about the early 20th century and would have been used to cut timber in the days before the advent of machine-operated saws. They are of a simple design and could easily be hand made.These tools are of interest as examples of tools used over a hundred years ago. .1 Two-person saw with wooden curved sides, two wooden pieces attached across the sides, a metal blade at the bottom and a metal piece across the top to keep the tool rigid. .2 as .1 abovevintage tools, warrnambool & district historical society collection

This saw is used for cutting curved edges of timber. It could have been used in the home or for commercial building purposes. The hand-held saw has largely now been replaced by electrically-operated machines. This item has no known local provenance but it is an interesting example of a hand-held tool of the past.This is a hand saw with a thin serrated metal blade. The blade is affixed to the bottom end of a wooden frame with two upright pieces and a cross piece affixed to the upper part of the frame. The top part of the frame has a piece of plaited rope stretched across. The top part of the frame has two wooden handles. The blade is somewhat rusted and the wooden parts and the rope are stained. vintage tools, history of warrnambool

Shearing handpiece. Sold in the US by Stewart Machines Chicago, Flexible Shaft Co. Sold by Cooper in Australia, model is air cooled and has no numbers or identifiable marks on handpiece. Manufactured between 1912 and 1924.shearing, sheep stations management, sheep stations - management

Pte Albert WARNER (3537) was a driver with 4th Australian Machine Gun Bn. He died in action in France on 18 Aug 1918 and is buried in a cemetery near Picardie (see AWM person records)British War Medal - The medal was struck by the Royal Mint, is a silver disc 36mm in diameter with a straight clasp suspended without swivel. The obverse shows Sir Bertram Mackennal's bare headed effigy of King George V facing left with the legend 'GEORGIVS V BRITT:OMN:REX ET IND:IMD - "George V, King of all the British Isles & Emperor of India". The reverse, designed by William McMillan, shows St George, naked on horseback and armed with a short sword, an allegory of the physical & mental strength which achieved victory of Prussianism. The horse tramples on the Prussian eagle shield and the emblems of death, a skull and cross bones. In the background are ocean waves and just off centre near the right upper time is the risen sun of victory. The years 1914-1918 appear on the perimeter in the left and right fields respectively. The watered silk ribbon is 32mm wide with 3mm wide royal blue band, 2mm wide black band, 3mm wide white band repeated in reverse order and separated by 16mm wide orange band. Victory Medal - The medal is bronze disc 36mm in diameter with a winged figure of Victory on the obverse. The reverse has the words 'THE GREAT WAR FOR CIVILIZATION 1914-1918', all surrounded by a laurel leaf. The watered silk ribbon is 32mm wided has two rainbow design with the violet from each rainbow on the outside edges, moving through to a central red stripe where both rainbows meet.The recipients name, rank, service number and unit are impressed on the bottom edge of the medal - 82069, PTE WARNER R.A.M.C

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded), until the time that cheaper containers were invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle, to contain milk, required its thickness because of the extensive handling (man and machine) before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle is a circle within it "6/35" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "20"milk, dairy, glass bottle

Burnt Gully - possibly near Woodvale. a. Black and white photo: men standing behind, alongside bagged grain. Steam farm engine on RH side. Written on rear of photo: threshing team at lunch engine Ruston Procter steam. 8 horse power, single cylinder, working pressure 75 lbs per square inch. 80 revs per minte. Fly wheel 6 feet in diameter. b. Pilcher's thresher on Robert Riley's farm, Burnt Gully. Bullock drivers Bill Pilcher, Paddy Mulcair. Bullock drawn threshing machine, large group of men standing alongside and to rear of machine. Two men standing on top of thresher. Steam traction engine on far left of photo. c. Pioneer log cabin Burnt Gully, the home of the Grafton family, demolished about 1930. Hut of slab construction, with corruated iron roof over timber slats. Chimney of logs and slabs topped with bricks on LH side of house. Steam farm machine in background on LH side.unknownagriculture, farm, grafton familyh, robert riley, bill pilcher, paddy mulcair, burnt gully.

A series of cuttings and photos on ornamental collections of cats. Sources are New Zealand publications, 'The Australian Women's Weekly' and some correspondence from the Globe Sewing Machine Co sent to 'Chance' of Bendigo's 3BO . Are all in a folder with a picture of a cat on the front. Dated 1950 - 1968. In a brown paper envelope there are four black and white photos with a Hill Thomas Auckland advert stamp on the back .One is a lady with 5 ceramic cats and the words 'Love Kenney ( Bushby ) ..The other three are of a variety of ceramic cats in and above a display cabinet .A sign states that the cats were gathered over 40 years by Mrs kenny -some are antiques over 100 years old all are gifts from customers - friends of the Globe Sewing Machine Co , from all over the world …in 1954 the famous cats were incorporated in the Trademark of the company . There is a related article clipping ( among others ) dated May 1955 -'She collects cats - the business appears to be a retail outlet for sewing machines - at Short's Building , 154 Queen St Aucklandornaments, ceramic, cats, lydia chancellor, collection, pottery, ceramics, cats, ornaments, photo, recreation

Twenty page knitting pattern book featuring black and cream printed graphics and text. The colour cover shows a man and woman seated on the floor both wearing knitted tops.front: [printed] 303 / Price 3/- 30 cents / llama / LLAMA HIS and HERS BOOK / SEVEN DESIGNS EACH IN SEVEN SIZES / INCLUDING / MACHINE and HAND KNIT / USING 4-PLY, DOUBLE, TRIPLE AND CHUNKY WOOLSknitting, pattern, fashion, knitwear, women

Cyrus Chambers was a self-described mechanic who started out winding bobbins in his father's woollen mill and went on to invent machines that changed their industries. Cyrus Chambers came from Quaker parents the ninth of thirteen siblings, he once said a year before his death. “I believe I have succeeded because, first, I was industrious; second, because I made a study of the subject that was before me.” At age 7, Chambers went to work in his father’s mill. His job was to monitor bobbins—wooden spindles around which thread was wound and to remove and replace them as they became full. "There was no child labour law at that time," he later recalled. Chambers loved machinery and always regarded himself as a mechanic rather than an inventor. At age 16, Chambers was sent to learn dentistry with an older brother, (Edwin) who was already in the field and willing to take him on as an apprentice. Chambers was talented at working with small parts. He used his brother's dental instruments to build a miniature high-pressure steam engine of silver. It ran at 3,000 revolutions per minute and weighed less than a half-ounce. At that time it was the smallest engine that had ever been constructed. The engine was displayed at the 1876 Centennial and is now in a permanent collection at the Franklin Institute USA. Chambers major invention was the paper folding machine and came from reading that school teachers made less than the young girls who were employed to fold book pages as they came off the press. He told friends that his first efforts were to make the machine that would fold newspapers after demonstrating his device he met with Horace Greeley of the New York Tribune who advised Chambers would never invent the machine that would be able to fold his newspaper or books. In less than a year Chambers had built a full-size machine capable of folding large newspapers and books and was installed at J B Lippincott & Co folding pages for the "Comly Speller" this machine ran successfully for twenty-five years until the printing works burnt down. Chambers then went into partnership with a brother and they established the firm "Chambers, Brother & Co" at a plant in Philadelphia. It was also observed in 1910 and a fact that there was not a periodical or newspaper printed or recently published book that had not gone through one of Chambers inventions. Chambers went on to produce many mechanical inventions and improvements to existing tools and machinery most notable was his invention for the machine that would make clay bricks. This machine made forty bricks per hour and by the end of Chambers life after many improvements, it could make more than four hundred. Although there were a large number of bold cutters made of this patent at Cyrus Chamber’s foundry in Philadelphia, the item is associated with a notable American inventor of the nineteenth century. This particular patent for a bolt and rivet cutter won Chambers the prestigious Elliott Cresson Medal. This cutter is just one of the many inventions and mechanical improvements that Cyrus Chambers made during his lifetime, contributing to the ongoing development of mechanical improvements that were occurring in American industry of the time and therefore a notable addition to the Flagstaff collection.Cast iron bolt cutter with removable tempered steel cutter. Chambers New No. 2.Raised embossed lettering on cast body of cutter "New No 2" on one side, "Chambers Bros & Co" on the other sideflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cyrus chambers, bolt cutter, paper folding machine, brick making machine, elliot cresson, elliot cresson medal, franklin institute, gold medal, rivet cutter

This is a pocket sized book. Red Buckram cover. It has 217 pages, printed in black ink. It has drawings and Military Manoeuvre's. It has drill movements, with and without arms, Coy and Btn level drills, machine gun drill. Infantry in battle, Attack Defence, fighting environments, Bayonet drills.Inside in advert section p.5, is written in pencil, Coat 7918, Rifle 4809, Bayonet 4893.passchendaele barracks trust, infantry trg 1911

This uniform would have been worn by the students of the Ballarat College of Advanced Education, School of Nursing. The colour of the uniform was changed at the request of trained staff in white.This apricot princess style dress with a central front zipper and side pockets has a collar and short sleeves. The back has a yoke with side pleats and a half belt between the seams. There is machine embroidery on the collar and sleeves. There is a blue logo printed on the left breast. Original sales tag attaches to sleevePrinted in blue - Ballarat C.A.E. Nursingnursing, university of ballarat, ballarat college of advanced education nursing, nurse uniform, textiles, costume, apron

Explanatory notes for a display of photographs of the Bendigo Butter Factory. Date given on the reverse of the Title photograph is 1950-1955. In another photograph there is a calendar with the date March 1957. These notes, mounted on cardboard relate to the photograph 11011.09. The notes as written - this machine automatically cuts and wraps bulk butter into neat pounds.bendigo, industry, bendigo butter factory.

Black and white photograph: Standing women working beside large factory machine at Bradford Mills, High Street, Kangaroo Flat. Physical Description : loose black and white photograph. Curling at edges. Inscription/markings: Herald Sun photograph supplied by Feature Series, Herald - Weekly Times, Melbourne.Herald Sunorganization, business, bradford mills, copyright not for reproduction. herald - sun photograph supplied by feature service the herald & weekly times ltd, melbourne australia

Neville Barnes Obstetric Forceps have a cephalic and pelvic curve and are used for delivery of babies presenting as occipitoanterior. The left blade being put on first followed by the right blade – the baby is then pulled down until the occiput is under the symphysis, then pulled around. (RACGP)Neville-Barnes forceps with traction attachment and pouch. The forceps are nickle plated, and consist of two blades and an attachable axis traction handle. Pouch is made of denim and has a full length pocket insert. The edges of the pouch are bound with a narrow satin binding and machine sewn. The pouch is fastened with a press stud.obstetric delivery

A black and white photograph of Cpl Normie Rowe, promoted to crew commander of an APC, cleans and services the twin 30 calibre machine gun on his APC, while his driver catches up on the latest comic strip to arrive in the mail from home. Note the distinctive initials on his helmet.photograph, cpl normie rowe, apc, 3rd cavalry regiment, gibbons collection catalogue

Mortlake Waterworks Trust – 18 May 1915 to 1 July 1984 Mortlake Waterworks Trust was constituted on 18 May 1915 following application by the Shire of Mortlake to carry out works for the supply of water to the township of Mortlake. The Trust was abolished on 1 July 1984 under the Water and Sewerage Authorities (Restructuring) Act 1983 when authority was transferred to the Mortlake Water Board. A cast iron seal press. This was used by Mortlake Waterworks Trust to emboss agreements and official documents. Die is still attached to the press. It reads: Mortlake Waterworks Trust 1915. Small metal machine painted black , decorated gold . Dies are attached with the seal of Mortlake Waterworks Trust . Paper is placed between the dies, the handle depressed and the seal embossed on the paper under pressure as a blind (inkless) embossing. The seal consists of two circles with the wording "Mortlake Waterworks Trust 1915". Mortlake Waterworks Trust 1915mortlake, public administration, water supply, amalgamations

A Prince 'professional' tennis machine, with ball delivery cord, and electrical power cord. Machince essentially comprises of a ball container, from which balls collect into a six cylinder dispensing chamber, and then shot out, one after the other, through a retractable cannon. Materials: Metal, Plastic, Rubber, Acrylictennis

Tour notes - photocopy double sided A4, titled "Welcome to the PTC's Preston Tram Workshop" giving a short history of the Workshops, tramcar building, variety of work, current workload and staffing numbers. Prepared by John Prideaux of the Machine shop c1985 for a tour. On the rear has a workshop layout plan.trams, tramways, tours, preston workshops