Girl's green silk organza dress with round neckline. Opening on left shoulder seam fastened with two press-studs. Decorative bow of pink satin ribbon attached between press-studs and falling from left shoulder seam. Short sleeves edged with two frills (2 cm) of gathered silk organza fabric. Dropped waistline with vertical rows of shirred stitching above the waistline front and back. Skirt with three layers of gathered fabric. Waistline finished with narrow casing.costume, children's, girl's green dress

A Spalding 'International Model S' tennis racquet, featuring: laminated convex throat; bevelled crown; hide strips along underside of shoulders; whipping around shoulders; and, deep-grooved, thick octagonal handle. Decal of model name, with wreathed medallions emblem, feature across throat on obverse. 'A.G. Spalding & Bros. Made in U.S.A.' logo encircling ball trademark features on throat on reverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Gut, Leather, String, Paint, Hidetennis

A Spalding 'Davis Cup' tennis racquet, with whipping around shoulders, fibre shoulder supports, leather handle grip with X-formation perforations, and plastic butt cap. Manufacturer's name features across base of head. Model name, with Davis Cup trophy image, features on throat. Spalding 'Wreathed S' trademark features on lower shaft and butt cap. Materials: Wood, Glue, Metal, Lacquer, Nylon, Leather, Ink, Enamel, String, Adhesive tape, Plastic, Fibretennis

A Bancroft Billie Jean King Autograph tennis racquet, with fibreglass lamination on shoulders, ribbon whipping around shoulders and shaft, and leather handle grip with quatrefoil perforations. Bancroft logo features across base of head. Throat and shaft feature model name. Wreathed red 'B' trademark features on lower shaft, and red 'B' trademark on butt cap. Materials: Wood, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tape, Fibreglass, Nylontennis

About the 1992 Barcelona Olympic Games donor Doug Pleasance wrote- During the 1980's the Australian wool industry was at its most prosperous times with record numbers of sheep producing wool receiving ever increasing values due to the success of the Reserve Price Scheme, and the overall guidance of the Australian Wool Corporation (AWC). As a humble technician, my role was a low profile newly created position of Controller, Technical Marketing where wool was to be marketed on its technical properties, as distinct from the Product Marketing Group which exploited the traditional high profile approach of marketing wool;s superior fashion attributes. The Woolmark was the tool central to this approach. The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The ensemble consisted of three elements- 1. The Official Uniform which was used for travel and all official functions. This included: a tailored blazer and trouser/skirt (all water repellent) by Fletcher Jones, pure wool olive-green faille fabric by Foster Valley, cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy. 2. Opening Ceremony Uniform a lightweight wool fabric printed with floral designs that had been inspired by the work of Australian artist Margaret Preston. This included: Lightweight W/PE shorts by Fletcher Jones in Foster Valley Fabric, socks by Holeproof and footwear by Hush Puppy. 3. Village Clothing was designed to be highly visible garments to make it easy to spot the Aussie and helped to contribute to good team spirit. This included: A pure wool shirt featuring blocks of contrasting colours, and a newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.8124.1 - The blouse is cream with an Australian floral design inspired by the work of artist Margaret Preston. The blouse has a scoop neck, cream buttons and small triangular cut outs on the sleeves. The shoulder seam runs to the points of the triangle and another across the back of the shoulders to create a rounded design. 8124.2 - Floral print fabric sample, this sample is cut in the shape of the front panel of the blouse but is unsewn. 8124.3 - Floral fabric sample. 8124.4 - Floral fabric sample. 8124.5 - Floral fabric sample.BARCELONA 19921992 barcelona olympics, sport, athletes, fashion, design, uniform

The first Orbost Brass Band was formed in 1889. Around 1908 the town band split and the Orbost Workers' Band was formed. Eventually the two bands merged in 1913 to reform as the Orbost Municipal Band under conductorship of Charles Spink. Further info and Ref: In Times Gone By - Deborah HallThe various Orbost bands over the years played a major role in community activities providing entertainment and musical experiences for the many members. Square shaped fabric banner. Red background with yellow braiding and tassels. Embroidered with initials O M B for Orbost Municipal Band. Ten shoulder tabs which are black with Orbost in gold embroidery.banner orbost-band societies music

Items issued to John Michael Giffard No 0327699 EOD Aust Army Training Team Iraq, rotation 8..1) Belt, black webbing with whitish coloured metal buckle. .2) Two shoulder epaulettes, cotton, navy blue colour , each has two light blue embroidered stripes on re rank..2) embroidered on, “AUSTRALIA”accessory, uniforms, raaf

Items in collection of K W Peatling. Refer Cat 5140.2. Box 173 for his service details.Webbing belt, Khaki colour, gold coloured metal buckle with sliding keeper, webbing loops with brass coloured metal buckles for shoulder straps. Underside of the belt has manufacturer details in black print.CGC # 1968 LARGE.belt, webbing, uniform, military issue

Simple, tin, convex shaped, green/black badge held by a pin/loop system mounted on rear. Front has a head & shoulder picture of an Australia soldier wearing a slouch hat. Banners are underneath this. On banners: “FOR KING & COUNTRY ANZAC AUSTRALIA”badges, king and country, anzac

Possibly belonged to Mrs Lindorph of Nyah.Hand tinted colour head & shoulders photo of 4 unknown WWI soldiers in jackets & head gear. Mounted with light fawn border & cream painted wooden frame with glass front & cardboard backing.Written in pencil on back: “Mrs Lindorph”photograpy - photographs-frame accessories, military history - army

Rifle stock, wooden, brass plate secured with 2 metal screws, brass plate has compartment to carry an oil bottle, black metal shoulder sling holder attached with 2 metal screws.Illegible marking stamped into timber on narrow end of stock.arms - fire arms, trades -carpentery, military equipment, passchendaele barracks trust

This is one of four bottles in our Collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases etc before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in 1850's - 1900's. Glass bottles and glass jars are in many households around the world. The first glass bottles were produced in south-east Asia around 100 B.C. and the Roman Empire around 1 AD. America's glass bottle and glass jar industry were born in the early 1600s when settlers in Jamestown built the first glass-melting furnace. The invention of the automatic glass bottle blowing machine in 1880 industrialized the process of making bottles. In 2019, plans were made to re-introduce milk glass bottle deliveries to Auckland in early 2020 The earliest bottles or vessels were made by ancient man. Ingredients were melted to make glass and then clay forms were dipped into the molten liquid. When the glass cooled off, the clay was chipped out of the inside leaving just the hollow glass vessel. This glass was very thin as the fire was not as hot as modern-day furnaces. The blowpipe was invented around 1 B.C. This allowed molten glass to be gathered at the end of the blowpipe and blown into the other end to create a hollow vessel. Eventually, the use of moulding was introduced, followed by the invention of the semi-automatic machine called the Press and Blow. In 1904 Michael Owens invented the automatic bottle machine. Before this time most glass bottles in England were hand blown. This is one of four bottles in our Collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases etc before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in the 1850s-1900s. The bottle gives a snapshot into history and a social life that occurred during the early days of Melbourne's development and the sea trade that visited the port in those days. Bottle, opaque brown glass, concave base, tapering slightly wider towards shoulder then inwards towards neck; ring of glass just below opening. Base is blown glass; pontil mark on base. "STUBBY 1850-1900 SMALL SIZE", ENGLISH 3 PIECE MOULD, HAND MADE TOP", "PAPER LABEL, CORK & WIRE SEAL $6flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, brown glass bottle, handmade glass bottle, handmade beer bottle, handmade late 19th century bottle

Illustration black and white. Taken and cut from a book. Head and shoulders portrait of Edward Henty. Edward is wearing a dark coloured bow tie with a light coloured shirt and grey vest with suit jacket. Front: 'EDWARD HENTY' - printed beneath portraitedward henty

The design of the bottle is sometimes called a ‘cottage’ or ‘boat’ shape. This handmade glass ink bottle was mouth-blown into a two-piece mould, a method often used in the mid-to-late 19th century. The glass blower burst the bottle off the end of his blowpipe with a tool, leaving an uneven mouth and sharp edge on the bottle, which was usually filed. The bottle was then filled with ink and sealed with a cork. More expensive bottles would have a lip added, which was more time-consuming and costly to produce. The capacity for a bottle such as this was about 3 ½ oz (ounces) equal to about 100 ml. Pen and ink have been in use for handwriting since about the seventh century. A quill pen made from a bird’s feather was used up until around the mid-19th century. In the 1850s a steel point nib for the dip pen was invented and could be manufactured on machines in large quantities. The nis only held a small amount of ink so users had to frequently dip the nib into an ink well for more ink. Handwriting left wet ink on the paper, so the blotting paper was carefully used to absorb the excess ink and prevent smudging. Ink could be purchased as a ready-to-use liquid or in powdered form, which needed to be mixed with water. In the 1880s a successful, portable fountain pen gave smooth-flowing ink and was easy to use. In the mid-20th century, the modern ballpoint pen was readily available and inexpensive, so the fountain pen lost its popularity. However, artisans continue to use nib pens to create beautiful calligraphy.This ink bottle still retains its original cork. The method of manufacture is representative of a 19th-century, handcraft industry that is now largely replaced by mass production. The ink bottle is historically significant as it represents methods of handwritten personal and business communication that were still common up until the mid-20th century when fountain pens and modern ballpoint pens became popular and convenient and typewriters were becoming part of standard office equipment.Victorian 'boat' shaped ink bottle; small rectangular clear glass ink bottle with grooves in shoulders for holding pen. Bottle has side seams and a 'burst-lip'. The bottle retains its cork.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, ink, nib pen, writing ink, writing, copying, banks, lawyers, commerce, student, permanent ink, stationery, record keeping, handwriting, writing equipment, writing accessory, office supply, cottage bottle, boat bottle, mouth-blown bottle, two-part mould, sheer-lip bottle, burst-lip, cork seal, stencil ink, copy ink

This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the blob collar. Bottles like this would usually be sealed with a cork. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, green glass. Applied blob lip. Shoulder seam, ripples in body, which tapers inwards towards base. Thick heel, shallow uneven base. Sediment inside bottle. Scratches in glass. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass, blob top

Small, oval head and shoulder portrait of a lady. She is wearing a dark, high neck dress with a frill collar. She is also wearing a small hat. Card has a blue border. Nothing on the back.photograph, portrait, female, portrait of a lady

Small head and shoulder portrait of a man with a long beard. He is wearing a jacket. Photographer's name printed in gold on the front. Also a gold border. Photographer's name and address printed on the back with a Coat of Arms.Johnstone, O'Shannessy & Co., 3 Bourke St. East, Melbournephotograph, portrait, male, portrait of a man, johnstone o'shannessy & co.

A mounted coloured photograph of three soldiers in jungle greens. The soldier in centre of the photo wears glasses and holds an M60 Machine gun. Flanking soldiers hold SLR's. All carry ammo bandoliers on their shouldersphotograph, soldiers, jungle greens

A coloured photograph of Kevin "Tassie" Wass with a figurine of a tiger on his right shoulder, Platoon Sergeant. Vung Tau, Nui Dat, May 1966 - March 1967. Service Number 61163, 5 RARphotograph, behind the wire, kevin "tassie" wass, 5 rar, nui dat, vung tau

Mounted light horse "Smoko" at Camp 13 with rider.Photograph of a magnificent mounted alert light horse, 303 rifle in leather holster, white blaze on head. Ears pricked. Soldier also in traditional light horse uniform with shoulder leather ammo bandoleer.camp 13

Made by internee in Camp 1 TaturaHand carved wall plaque of local stone. Pinkish in colour head and shoulders of a female, with curly hair, a necklace and ornate collar. A scroll along the bottom has Lucrezia - Borgia written in cursive scriptTatura, Lucrezia Borgia engraved on the front in cursive scripttatura, ornaments, stone, plaque

John E. Blacker was a Methodist and then Uniting Church miinister - placements at Dandenong (Lilydale), Kilmore & Broadford, Kerang-Barham, Sunshine, and Moonee Ponds. In the early 1980s he led a charismatic renewal program at Sunshine and Moonee Ponds, and was involved with a controversy over re-baptisms. At a later point, he resigned from the Uniting Church ministry to lead the "Advance & Restoration Ministries" program that he and his son, Paul, managed.Head and shoulders portrait of John Blacker when still a Uniting Church minister, but working as "Advance & Restoration Ministries" which was then located in the 3rd floor of the Synod offices at 130 Little Collins Street Melbourne.John Blackerblacker, john e., advance & restoration ministries

Sash was worn at all meetings except where the program made it in impractical.Recording Ray royal blue cotton sash with three white bars worn in the centre and rosette of royal blue, white and gold. It was worn over the right shoulder and joined at the left side below the waist. methodist girls' comradship rays section