Has space for entries of date, depot, change over details, defective cars, flats, brake shoe, leading hand inspections, day in cars, number of cars, transport of vehicles, staff shortages, overtime worked, wheels inspected and remarks, depot tally by class, pantographs, motor brushes overtime works, car status, daily inspection of fire appliances and general remarks. See Reg Item 3611 for an earlier version. Includes B1 and B2 class trams. Sampled from a large book of forms.Demonstrates tramcar maintenance forms.Form, titled - "Tram Fleet Department" - Daily Log Book comprising original sheet and copy sheet (carbon paper not required - NCR)trams, tramways, forms, tramcars, tramcar maintenance, ptc

The Lister Auto-Truck was a small monowheel tractor built for moving light loads around factories, railway yards and similar sites. They were built by R A Lister and Company of Dursley, Gloucestershire, well known for their range of small stationary engines The Auto-Truck was one of several monowheel tractors to appear in the 1920s and '30s, with the availability of small, reliable petrol engines, as developed for motorcycles and the stationary engines for which Lister were already known. These were tricycle vehicles, with the single leading wheel used for both drive and steering. Their simple construction carried most of the mechanism on this wheel as a single unit, the chassis with the trailing wheels being little more than a trailer for balance. Simplicity was a key feature. The engines were single-cylinder and air-cooled. Ignition was by magneto, rather than requiring a battery and electrical system. One of these designs was produced in the 1920s by George Grist of the Auto Mower Co., Norton St Philip, Somerset. The engine was a JAP 600 cc four-stroke air-cooled sidevalve, a typical small engine of the time. The Auto Mower Co. were Lister agents and when Lister heard of this 'Auto-Truck' they bought one for use in their own factory. It was used to carry heavy engine castings from the foundry to the machine shop. Lister customers saw them and there was such interest in wanting to buy them that Lister negotiated with Auto Mower to build them under licence. Although Lister were already well known for their small petrol stationary engines, these were heavy cast-iron engines with water hopper cooling and unsuitable for vehicle use. Lister remained with the JAP engine for the Auto-Truck. The Auto-Truck was designed for use in factories or other places with smooth surfaces of concrete or tarmac. This allowed the use of small solid-tyred wheels with only simple suspension, making the vehicle simple, cheap and lightweight. They had little ability on soft surfaces though and could even topple over if driven carelessly across slopes. Their design was a compromise between the top-heavy nature of the tall engine grouping above its wheel and a well thought-out chassis for stability. The bearing between them was a large diameter ring roller bearing, mounted at the lowest part of the chassis. This gave rigidity and stability, even after long wear. A ring of rolled channel girder was attached to the engine group and rollers on the chassis carried the load upon this. On early Auto-Trucks this bearing is set very low, in line with the chassis members, and is covered by thin steel plates. The front panel of the engine cover is distinctive with large ventilation holes and a Lister signature cut through it. Strangely this panel is made of thick cast iron, providing substantial weight high on the engine and only adding to its top heaviness. To improve visibility of moving vehicles in noisy factories, this panel was often painted white, the rest of the vehicle being Lister's usual brunswick green. The driver was seated on a Brooks bicycle saddle, which in recognition of the lack of vehicle suspension, was carried on the end of a cantilevered bar that acted as a leaf spring. A wide handlebar on the engine group was used for steering. A squeeze bar the width of this handlebar engaged the clutch. Controls included a hand throttle, a gear lever with two forward and one reverse gears, and a large handbrake lever. The engine unit rotated freely for a full 360° rotation. When used in reverse, the Auto-Truck could either be driven from the saddle, looking backwards over the driver's shoulder; or they could dismount, swivel the engine unit around and control it as a pedestrian-controlled truck from behind. Under the engine cover were two equal diameter tanks, a fuel tank for petrol and a shorter oil tank. Engine and chain-drive lubrication used a total-loss oil system, controlled by a small pump and needle valve. Info Ref: Lister Auto-Truck - Wikipedia https://en.wikipedia.org/wiki/Lister_Auto-TruckHistoric - Industrial monowheel tractor for moving light loads around factories, railway yards and similar sites.The Lister Auto-Truck - small monowheel tractor Made of steel with three wheels. Powered by a J.A.P single cylinder petrol motor which is Hand Cranked to start.Lister puffing billy, lister, lister auto truck, monowheel tractor

Black and white photocopy of a photo of J. Semmens, Grocer, Draper, and General Storekeeper, Long Gully, Bendigo. Photo shows the store with the name, J Semmens, Grocer, Draper, Boot and Shoe Warehouse. In front of the shop is a number of people and two horse drawn vehicles. Written under the photo is: Cr was Bond Street & Creeth Street Long Gully, now Eaglehawk Road & Creeth Street, Long Gully. Note - Kerosene Light or Gas Light at Corner.bendigo, history, long gully history group, the long gully history group - j semmens, j semmens draper

Enlarged photo of a coloured postcard of Pall Mall, Bendigo. The photo shows a tree lined Pall Mall with some horse drawn vehicles and pedestrians. Myers have their name on the veranda and there is a sign with Abbott next to it. On the right side is the Post Office clock tower and behind is the poppet legs of a mine. The photo has a purple and gold border. In the bottom right corner beside a rolled corner is an emu and in the top left corner is a scroll and part of a head of wheat.bendigo, history, long gully history group, the long gully history group - pall mall bendigo, morley johnson's, myers, abbott

Set of 3 photographs glued to A4 paper representing Abel Street Distribution Centre. Bendigo 1985. First photo shows gardens surrounding the new building, Second photo shows man, wearing a coat, admiring the flowers, white car parked to the right of the photo in front a a building, and 2 vehicles, 1 medium size and the other is a semi trailer both fitted for the transportation of gas, Third photo shows a man playing darts in the staff room.business, retail, gas and fuel

Journal of the Tramway Museum Society of Victoria Ltd. Volume 10, No. 2, 35 cents, April 1973. 18 pages. Cover piture (right), a scene from the 70's (1970) at Crich, Derbyshire where suitable surroundings are being created for the display and operation of the preserved vehicles of the Tramway Museum Society (U.K.). A similar development is being undertaken at Bylands, Victoria, by the Tramway Museum Society of Victoria. The car are Oporto 9 (1873) and Sheffield 15 (1874).person, individual, basil miller

The postcard shows three planes flying above the Brooklands motor track with 'Brooklands Motor Track and Flying Ground'. To the right is a large two story brick building and on the left of the building is a long open covered vehicle stall. To the back are work sheds, further to the left are spectators cars and in the distance is open space with trees. Spectators line the race track both sides watching a racing car. In the foreground is a hill with fencing down to the track and spectators along the fence.Valentine Seriesaviation, civilian, brooklands motor track

Yields information about the accident between a tram and truck, just prior to the closure of the SEC Operated Ballarat Tram system.Newspaper Clipping or cutting titled "The end for tram 31", from The Courier, 3/9/1971, containing a report on the collision of tram 31 with a fruit truck in Sturt St near Lydiard St. Gives time as 445, truck driver Nicholas Marios, tram driver D. Powell. Included in the item is a photo of the tram and the two vehicle drivers involved. Tram has a Twin Lakes sign. See Reg Item 547 for a print of the photograph.accidents, twin lakes, collision, sturt st

Newspaper cutting from The Courier, Ballarat, Tuesday 19/10/1993 from the Tuesday Column - heritage feature of the Courier, featuring a postcard of an ESCo tram and horse drawn Vehicle in Sturt St, just to the East of Lydiard St. Photo taken from the Post Office tower, soon after opening, as the destination board is on the dash panel. Caption notes it is a colour postcard that was written in 1908. Has a good illustration of telephone poles / telegraph wires.trams, tramways, sturt st., esco, telephone poles

Black & White photo of M&MTB tramcars 887 and 888 in Coldblo Road, Malvern Depot, on 25/6/1955, Taken at start of Australian Electric Traction Association's Bourke St tour. Tram 887 has destination "SPECIAL", Route No. "A", auxiliary board of AETA's name and Special Car, and board on front dash of car by headlight of "Solve Traffic Congestion Move People Not Vehicles". Tram in rear, 888, has route number "B"On rear typed on paper "887 & 888 lined up at Malvern Depot at the start if the A.E.T.A.'s historic Bourke St. Tour. June 25 1955 Geoff Grant Photo" and Geoff Grant's stamp in btm rh corner.trams, tramways, melbourne, aeta, bourke st., tours , tram 887, 888

Black & White photo of M&MTB tram No. 1033 at North Fitzroy tram depot, prior to going on an AETA tour on 7/4/1956. Tram showing destination of "SPECIAL", has auxiliary board of "AETA", an AETA tour board on front bumper and panel on front dash "SOLVE TRAFFIC CONGESTION, MOVE PEOPLE NOT VEHICLES". Trams 1027 and 1029 in depot fan and others with numbers obscured. See also Reg item 1620.2 for negative of this item.On rear in btm rh corner, "Geoff Grant, 7 Apr 1956 Victoria"trams, tramways, melbourne, north fitzroy depot, aeta, tours , tram 1033

White paper catalogue with green printing for a sale on account of Parks Victoria, on 12th February 1997 at Rosebud. For sale were vehicles, marine equipment, boats & trailers, metal and wood working machinery, steel and scrap, office furniture and equipment and various tools. Announcement printed in the front of catalogue mentions that J. H. Curnow & Son Pty. Ltd. Are combining their name with the Dyett family and trading as Curnow Dyett, Real Estate Agents, Auctioneers and Qualified Valuers.business, auctioneers, curnow dyett, ian dyett collection - auction catalogue - parks victoria, ian dyett, curnow dyett, j h curnow & son pty ltd, occupational health and safety act 1985, noel dyett, ian dyett, fred dyett

Yields information about the Sturt St West Parker St Loop.Colour slide, Kodak white cardboard mount, developed March 1969 of Nos. 34 and 26 crossing at the Parked St loop in Sturt St west loop. No. 34 is heading for Mt Pleasant and has a Trotting at Bray Raceway auxiliary board and No. 26 running a Special. Shows how's the motor vehicle traffic had to veer out past trams. One of a series of tour photos - see Reg item 7667, 7668, 7683 and 7701.Has in red ink "Sturt St Loop"ballarat, tramways, trams, sturt st west, parker st loop, tram 26, tram 34

The seal of the former City of Kew is held in the collection of the City of Boroondara, as is the Mayoral Chain of Office. The original design was circular and cast in high relief to allow impressions to be made. Later versions such as this modernise the style for a range of purposes.Four colour version of the City of Kew Crest, adopted by the Municipality in 1861 for use in its circular seal but later adapted as in this version for printing or for identification. There are two examples this version: both transfers designed to be affixed to Council vehicles. The collection includes 11 copies of the large transfers and one copy of the smaller version. The bright colours used were typical of the period. The large version is 375 x 295 mm; the smaller is 205 x 155 mm.CITY OF KEW / DIEU ET MON DROITcity of kew, crests, municipal crests

Newspaper Clipping from The Courier, Ballarat 2/10/1999 about the arrival of ex MMTB Scrubber tram No. 8 (8W) and the use of the vehicle. Quotes Alastair Reither (who claims he was mis-quoted about the cleaning of the tracks) and Dave Macartney. Has a photo of the tram with Alastair and Dave (btm1218i1.jpg) and a cartoon by Inkcinct (btm1218i2.jpg). Also notes a report on the Heritage Tram Project being prepared for Council. Item written by Lyndal Reading.On rear of sheet in pencil "Courier 2/10/1999 p7"trams, tramways, scrubber tram, btm

Petrol rationing was gazetted in May 1941. Australia's lack of fuel storage options and the diversion of tankers bringing fuel here forced the government to begin rationing. Initially it was proposed that consumption should be reduced by 50% but this was modified to 1/3 reduction. People had to apply for a petrol licence and this was then used to obtain ration coupons. Initially coupons were issued on a 6 monthly basis but this was reduced to 2 monthly and allowed people roughly 2000 gallons per year. Coupons allowed for 1, 2, 5, 10, 44 and 100 gallon amounts depending on need. eg. private, commercial, farm use. Rationing was strictly enforced until 1942 but remained in effect until 1950.WWII One Gallon Fuel Tickets: 6 x cream card with blue flecks, perforated edges and red print. At the top in the centre is the Commonwealth Emblem and Motor Spirit Ration Ticket. Commonwealth Of Australia. Underneath is 1 One Gallon and Valid only until 31st May 1948. Not Transferable. This ticket must be endorsed in ink by consumer with name, licence number and vehicle registration number. The back ground is circle shapes with Department of Supply and Shipping.government, federal, fuel ration ticket

Petrol rationing was gazetted in May 1941. Australia's lack of fuel storage options and the diversion of tankers bringing fuel here forced the government to begin rationing. Initially it was proposed that consumption should be reduced by 50% but this was modified to 1/3 reduction. People had to apply for a petrol licence and this was then used to obtain ration coupons. Initially coupons were issued on a 6 monthly basis but this was reduced to 2 monthly and allowed people roughly 2000 gallons per year. Coupons allowed for 1, 2, 5, 10, 44 and 100 gallon amounts depending on need. eg. private, commercial, farm use. Rationing was strictly enforced until 1942 but remained in effect until 1950.WWII Fuel Ration Cards: A sheet consisting of 9 tickets with perforations for individual use. Cream back ground with pink print. The top has a leaf design with "Commonwealth of Australia" written across the top. Underneath is "Motor Spirit Ration Ticket" with the Commonwealth emblem in the middle. The ticket is for 1 One Gallon Valid only until 31st July 1947 and is not transferable. At the bottom is "This ticket must be endorsed in Ink by consumer with name, licence number and vehicle registration".Printed by the Authority of the Government of the Commonwealth of Australia.government, federal, ww11. miss g. alice jones

Company or Equipment Manufacturer technical pamphlet - 28 pages, A4 finished size, full colour, centre stapled titled "Bombardier - the evolution of mobility" providing technical information about Bombardier passenger vehicles in Australia, asset Management and maintenance capabilities and rail control (signalling) systems. Includes details of the Melbourne E class and the Gold Coast trams with photographs, Velocity and EMU's for Adelaide, Brisbane and Perth and technical details. Also gives details of offices and addresses.trams, tramways, bombardier, e class, yarra trams, adelaide, gold coast, perth, brisbane

Colour postcard divided back, serrated edges - Biscay Greetings, Looking along Swanston St to the Shrine of Remembrance from Lonsdale St, busy street scene with about 12 trams, Safety zones, buildings and vehicles in the view. c1980. Note the tramway lights on the north bound track. Back has space for name and address, stamp and a message and details of the postcard. Produced by Biscay Greetings, possibly mid to late 1980's. Card No. BG200.trams, tramways, swanston st, st kilda road, shrine of remembrance

Report - 18 pages plus yellow card covers with brown comb binding titled "Public Transport Study - Port Melbourne, South Melbourne and St Kilda - Executive Report", prepared by the Ministry of Transport, January, 1983. Report looks at the patronage decline on the two heavy rail lines, transport in the area, patronage, comparison of possible services, operating costs, vehicles, bus services, traffic priority and possible light rail services. Has diagrams and maps.trams, tramways, st kilda, port melbourne, light rail, conversion, transport

The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This dray harness is a plain, basic harness and reflects its working class origins. It was used by Mr. Oswald (Jack) Bourke with his horse and dray to firstly deliver drygoods from Sunbury to Melbourne in the 1930's and later (through the 1940's and 1950's up to 1961) when he worked on the garbage round for the Springvale City Council. This horse harness is a significant example of the equipment that was needed wherever horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used with a horse and dray circa 1930's to the early 1960's. It is made up of a number of components. 1. A leather bridle with metal buckles and rings, blinkers and a metal single jointed, snaffle bit that has the initials M B stamped onto the leather. 2. A leather bridle with metal buckles and rings and a metal "straight bar" Eggbut snaffle bit. It has an elongated X design (with 4 dots) stamped onto the leather strap holders near each buckle. 3. A blue and white vinyl halter with one leather patched strap. The nose band and a chin strap are covered with woollen padding. 4. A pair of leather shaft protectors. They have lacing holes along each edge and a repeating design of small shapes (flowers, wings, crosses and arrowheads) which run along the front of each protector. 5. A leather strap with a stainless steel chain and catch and a maker's mark for "Glenn's Leather Goods, Pearcedale Victoria" stamped onto the end. 6. A wide leather strap covered with a webbing sleeve. It has two large metal rings and each end and one ring has a rope attached. 7. A leather strap comprised of three separate sections (two shorter and one longer) joined with two metal rings. The longer section has notches along its length and the shorter section at the other end has a buckle. It also had a maker's mark stamped on it but the mark is very worn and the writing is difficult to read. 8. An adjustable leather horse collar with two buckles and straps at the top opening and two "B's" stamped into the leather. The top of the collar is made from treated leather pieces stitched together and the underneath of the collar is untreated leather. It has a padded indentation running all the way around the collar for the hames to sit in. 9. Two pairs of long leather traces - each having a buckle and notched section at one end and each one is made with three lengths of leather spliced together. 10. A leather strap (with one spliced join) belonging to a horse harness with two shorter straps (each ending with a metal clip) attached to a steel D ring at one end. 11. Three assorted short leather straps - the top one has clips at each end and a buckle (for adjusting the length) in the centre, the middle strap has notches and a buckle and the bottom strap is white with notches and a buckle.Bridle with blinkers - "M B" Bridle - design showing an elongated X with a dot in each section stamped onto strap holder Shaft Protectors - stamped design of flowers, wings, crosses and arrowheads Strap with chain - "Glenn's leather goods / Pearcedale / Victoria" Leather Strap (with two metal rings) - Maker's stamp - "name indecipherable / SADDLER / ...OURNE" Collar - "B / B" Leather strap - flagstaff hill maritime museum and village, warrnambool, great ocean road, sunbury, springvale, dray, delivery dray, harness, horse harness, horse drawn vehicles, working horse, oswald (jack) bourke, bridle, horse collar, hames, shaft protectors

VICTORIAN RAILWAYS small note book, hard cover with purple binding dated 9.1.1928. Each page details the Name of the Driver, Fireman, Van man and State of weather. Number and Class of Vehicles, Tonnage Contents, Total Description of Loading from Station to Station, Time of arrival and departure, Loco shunting, Van goods, Blocked by signals, other causes. Inside cover steam train instructions from T.B Molomby, General Supt, of Transportation. Reference is David Badham.document, memo, railway, victorian railways small note book, hard cover, t.b molomby, general supt, of transportation

Sepia photograph mounted on fawn board. Vertical board building and skillion. Two gable roof - open end under one gable. Large double doors (painted) under other gable. Small doors and windows with lift up shutters along side. Vehicles, wheels and 8 men in front of building. Small painted weatherboard building to L. Sign on front of building. Inscriptions: in image - 'Watkin Walker? & Treacy General Smith and Agricultural Implement Maker'.buildings, commercial

[a] Cohns Printed manilla envelope handwritten caption 'Powell Gas Producers, Correspondence and Contracts in respect thereof. Dated June-July 1941 August 1942. [b] Documents pertaining to above enclosed. There is a letter from Leyland Motors North Melbourne dated 15.7.1941 and order forms relating to the purchase of 3 x Powell Gas Producer plants to be fitted to three vehicles -the fitting of 'Powell truck type Producer Gas Plants for Leyland Model 'Cub KZ3bendigo, industry, cohn bros brewery

A simply design four-wheeled vehicle with one seat on a high side box tray. The transverse elliptical springs, front and rear, are set above the floor level which allows a lower centre of gravity, and easy entry. Colour Black body and reddish-brown undercarriage with black lining on the wheels. History Dating from the 1850s the piano box buggy became the most popular style of buggy in the USA and a common sight in Australia. The examples in this collection probably date from the early 1900s

Also sepia toned photographic print 10cmx15cm, good condition old cat No 310 or 318? (Club Hotel and Hummocks area cropped from top) also Black and white photographic print 12.5cmx18cm, good condition- 2 copies 'Original T-Beam bridge opened Sept 1917 on reverse P01151-3.Black and white photographic miniature postcard showing the concrete bridge over the North Arm, showing the extended abutments, and shortened bridge length compared to previous bridge, causing restriction of waterway. Two walkers and horse drawn vehicle, buggy, on bridge. Remaining piles of wooden bridge upstream of bridge, telegraph poles upstream of bridge and across mudflats. Bridge to Bullock Island from mudflat, Club Hotel, Cunninghame Arm, and sand hummocks in distance. Lakes Entrance Victoriabridges, waterways, coast, transport, hotels

Black and white print with negative (N148) of a horse tram arriving at the Grenville St. terminus with a person stepping off the tramcar. Copied from a postcard, Has buildings on both sides of Sturt St. in photograph, and one other horse drawn vehicle. Also Suttons and Richards & Co. buildings in photo. Titled "Sturt St. Ballarat" Copy negative and photograph by John Phillips of a Postcard. Two copies of print held. See Reg Item 2762 and 3898 for actual postcard.trams, tramways, sturt st, horse trams, grenville st

Yields information about the appearance of Sturt St at the time of Ballarat Begonia Festival, 1957 - the flowers in the medium strip, the tram and the shoppers in particular the women.Black and white photograph of Ballarat No. 14 west bound in Sturt St during the 1957 Begonia Festival with the Town Hall (with a Begonia Festival sign on it), and other buildings in the background. Has the Australian Mutual Life Building, the Odeon Theatre buildings. In the centre median strip, there is a large arrangement of flower beds and many women shoppers crossing the road, motor vehicles and a lady on a bicycle. No. 14 has the destination of Haddon St via Drummond Nth. Festoon lighting is strung out along the street.On rear in red ink "Ballarat Car 14 Sturt St B'rat Summer '57" and the stamp of Jim Seletto.tramways, trams, sturt st, begonia festival, town hall, shoppers, tram 14

Single page copy of page 234 of the "Electrical Engineer and Merchandiser, October 15, 1949", titled "News of the Month". Reports on the recommendations of a report by H.H. Bell of the MMTB for trolley bus system to replace the existing tramways in Ballarat at an approx. cost of 198,000 pounds. Also reports on the MMTB Annual report for 1948/49 and the SEC installing FM radios into motor vehicles in the Midland area's patrol cars. Not know who made the copy or when. Images of document added 27-08-12.Has word "Bill" and an arrow in the top left hand corner.trams, tramways, ballarat, trolley buses, sec, mmtb