Showing 2907 items
matching bodied
-
Ballarat Tramway Museum
Photograph - Colour Photograph/s, Carolyn Dean, 17/05/1992 12:00:00 AM
Colour photo of Horse Tram No. 1 during reconstruction, out the back of the depot on 17.5.1992. Both stairs have been fitted, painting well underway, and first of the top deck handrails on the north side have been fitted. These handrail uprights were formed from materials donated by the TMSV, who obtained them from a Beaumaris Horse Tram body. On Fujicolour paper.On rear "167.4 17.5.1992, Carolyn Dean Photo" in blue ink, and "92ARPT" in purple Texta.horse tram no. 1, tramcars, reconstruction, btps, tram 1 -
Melbourne Tram Museum
Ephemera - Ticket/s and Newspaper Clipping, John Stanley Caddell, Melbourne's first motor buses, c1927
Tickets and newspaper clippings glued to a sheet of cardboard comprising: 21 - MMTB Cable and Electric tram through tickets - transfer and priced, all numbered, 4 employees pass, check tickets and 1 one penny ES ticket.. On the other side a set of four newspaper cuttings is a photo of "Melbourne's first motor buses", some old Australian Steamships, poem and a piece of a person's body.trams, tramways, tickets, cable trams, transfer tickets, buses, employees pass -
Ballarat Tramway Museum
Magazine, Australian Railway Historical Society (ARHS), "ARHS Bulletin No. 441, July 1974", "The Cable Trams of Sydney and the Experiments leading to final electrification of the tramways", 1974
Magazine - 24 pages, printed on off white paper, centre stapled titled "ARHS Bulletin No. 441, July 1974", containing an article "The Cable Trams of Sydney and the Experiments leading to final electrification of the tramways" by R. F. Wylie. Looks at the both the North Sydney and Kings St cable lines, from which the body of ESCo tram operated on, the winding houses, route maps, depots. trams, tramways, arhs, sydney, cable trams, north sydney, king st -
Bendigo Historical Society Inc.
Newspaper - BILL ASHMAN COLLECTION: CORRESPONDENCE
Newspaper article titled Life Processes - Auckland Research - Work of Two Doctors. Bendigo Advertiser, Friday, June 6, 1940. Article mentions metabolism, Electricity in the Body, American Research, Electrically Altered Water and Two Hundred Cases Tested. Also four other articles, one dated July 30, 1941 mentioning metabolism and Scalebuoys. Two articles have several copies.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, the bendigo advertiser 6/6/1940, metabolism, dr george crile, rockefeller foundation, auckland hospital board -
Bendigo Historical Society Inc.
Document - BENDIGO CEMETERIES COLLECTION: NOTICE OF REMOVAL OF BODIES FROM BRIDGE LANE CEMETERY
Photocopy of announcement that appeared in newspaper in 1872. The City Council having ordered the removal of the remains of bodies from the disused Cemetery in Bridge lane, the friends of the deceased are requested to communicate their wishes as to which denomination in the Sandhurst cemetery the re-internment is to be made. Geo. A. Fletcher, Town Clerk 26th November, 1872. Also six photocopies of handwritten correspondence from the City of Sandhurst signed by Geo. A. Fletcher.bendigo, cemetery, bendigo cemetery -
Bendigo Historical Society Inc.
Tool - MCCOLL,RANKIN,STANISTREET COLLECTION: COMPANY SEAL
Collection,McColl,Rankin,Stanistreet. Cast iron hand press company seal for the South Nell Gwynne Gold Mining Company, used to seal all official documents pertaining to the South Nell Gwynne Gold Mining Company. Black enamelled body and handle with brass seal, painted in white South Nell Gwynne Gold Mining Co. N.L & on other side S.NG.commerce, office equipment, company seal -
Bendigo Historical Society Inc.
Photograph - BASIL WATSON COLLECTION:ALBUM OF PHOTOGRAPHS, c. 1916
Album of 8 photographs - Basil Watson biplane being constructed inside the family home: 1. Body frame of plane; 2 Watson standing in front of cockpit frame; 3. Section of wing and tail; 4. Watson in cockpit frame; 5. Side view of biplane in backyard; 6 Front view of biplane in backyard; 7. As for 6; 8. Rear view of biplane in backyard.photograph, aircraft, basil watson collection -
Flagstaff Hill Maritime Museum and Village
Ship Log, 1900-1920
Thomas Walker & Son was internationally renowned in the manufacturing of ships logs. Founding father Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ships log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean) and the most common log in use for two generations. It took till 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. This ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades. Ship Log, three analogue dials calibrated in increments of Miles, the Rocket Log is a nautical instrument for measuring a vessel’s speed and distance traveled. The floating log was drawn behind the ship over a fixed time period in order to measure the distance traveled. The counter could measure enough miles to cover the maximum distance traveled by a ship in one day. The log has two distinct parts; a brass register, made by Walker, showing the distance recorded and the rotator made by Reynolds, that spins in the water driving the counter. both parts are connected by a linked chain. The register has a cylindrical brass body approx 4.5 cm diameter containing registering mechanism with hardened steel bearings. Distance is indicated by the three pointers on enamel plate as follows: graduated every 10 miles from 0-100; every mile from 1-10; every 1/4 mile from 1/4 -1. A brass sling and eye secured to the body enables it to be attached to the taffrail. The original rotator would have had a cylindrical tapered wooden body, approx 4.5 cm in diameter with three metal alloy fins or could be all made from brass. A towing eye is fitted to the tapered end. The two pieces of apparatus are connected by a length of linked chain, length 22.9 cm."Walkers Rocket Ship-Log Birmingham (Patented)" printed on face-plate. "Made by Thomas Walker".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship log, rocket log, mechanical ship log, measuring instrument, marine instrument, nautical instrument, speed recording instrument, ship log register, walker ship log, walkers rocket ship-log, thomas walker, thomas walker & son, thomas ferdinand walker, walker log business, reynolds ship log rotor, taffrail log, taff rail log, west india association -
Queenscliffe Maritime Museum
Badge - Plaque, Master Mariners of Australia
The Company of Master Mariners of Australia is an association established to promote the interests and status of the Merchant Navy generally and of Master Mariners in particular. The Company was founded in 1938 by Capt. A.N. Boulton, MBE, VRD, BCom, ExC and became an incorporated body in 1988. The Company of Master Mariners of Australia Limited is a not for profit professional association that is limited by guarantee. The Company has five Branches based in Fremantle, Adelaide, Melbourne, Sydney, and Brisbane.Captain John Noble is a former sea pilot and authorPlaque of the Company of Master Mariners of AustraliaCompany of Master Mariners of Australiaport phillip sea pilots, captain john noble, the company of master mariners -
Melbourne Tram Museum
Postcard, Nucolorvue Publishing, "Melbourne The busy intersection of Swanston and Flinders Streets", late 1960s
Photo taken from the Flinders Gate Plaza looking west with the edge of the plaza podium fence in the view. In the view are Flinders St station, the SEC building and Young & Jacksons, which has an advertisement for Taubmans Paints. Two trams are crossing Flinders St, a wide-body tram with no marker lights, and W2 302. Based on the tram not being fitted with marker lights and the opening of the Plaza, photo late 1960s. Yields information about the intersection of Flinders and Swanston Streets.Colour postcard by Nu-Color-Vue No. ML 120, with serrated edges.postcards, swanston st, w2 class, flinders st, tram 302 -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Box of Astra Xylocaine 1% ampoules associated with Dr Lachlan Hardy-Wilson, Astra, c. 1985
Lidocaine (or lignocaine) is a local anaesthetic (numbing medication) that is used to numb an area of your body to help reduce pain or discomfort caused by invasive medical procedures such as surgery, needle punctures, or insertion of a catheter or breathing tube. It is also sometimes used to treat irregular heart rhythms that may signal a possible heart attack, and can be given in an epidural (spinal block) to reduce the discomfort of contractions during labour.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Cardboard box containing 19 ampoules of Xylocaine 1%. The ampoules are in three strips of five, and one strip of four. Expiry date noted on the box for this medication is August 1985.surgery -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tools, metal scythe, c1880
A scythe is an agricultural hand tool for mowing grass or reaping crops. It was largely replaced by horse-drawn and then tractor machinery. A scythe consists of a wooden shaft and a long, curved blade is mounted at the lower end, perpendicular. Scythes always have the blade projecting from the left side when in use. Mowing is done by holding the handle , with the arms straight, the blade parallel to the ground and very close to it, and the body twisted to the right. The body is then twisted steadily to the left, moving the scythe blade along its length in a long arc from right to left, ending in front of the mower, thus depositing the cut grass to the left. Mowing proceeds with a steady rhythm, stopping at frequent intervals to sharpen the blade. The correct technique has a slicing action on the grass, cutting a narrow strip with each stroke Mowing grass is easier when it is damp, and so hay-making traditionally began at dawn and often stopped early, the heat of the day being spent raking and carting the hay cut on previous daysEarly settlers and market gardeners used these scythes as they established their farms in Moorabbin Shire c1880A large metal scythe with a wooden handle x 2early settlers, pioneers, market gardeners, moorabbin, bentleigh, brighton, cheltenham, tools, blacksmiths -
Melbourne Legacy
Sign, Women CAN get along!
A newspaper article about the 10th Anniversary of the War Widows Guild published on 23 November 1955. The War Widows Guild was founded by Mrs Jessie Vasey. She was the wife of Major-General Vasey and during the second world war she became secretary of the AIF Women's Association, a body which sought to help soldiers' wives. Her work with this body drew her attention to the plight of war widows. After Major-General George Alan Vasey died in an aircraft accident on 5 March 1945 she became a widow herself. At the end of the war Mrs Vasey founded the War Widows Guild. This reproduction on display board may have been for an exhibition of Guild memorabilia at some time. The Victorian War Widows Guild closed in 2021. Some items, including this board, were donated to the Legacy archive for preservation. It was possible for a widow to be members of both Legacy and the War Widows Guild. Both organisations helped war widows in various ways.A record of the work done by Jessie Vasey and the War Widows Guild.Newspaper article 'Women can get along' reproduced on a display board for signage of an exhibit.war widows guild, jessie vasey, wwg -
Kew Historical Society Inc
Photograph, Anglo-Australasian Photographic Company, View of the township of Golden Square, c. 1876
Nicholas Caire was born on Guernsey in the Channel Islands in 1837. He arrived in Adelaide with his parents in about 1860. In 1867, following photographic journeys in Gippsland, he opened a studio in Adelaide. From 1870 to 1876 he lived and worked in Talbot in Central Victoria. In 1876 he purchased T. F. Chuck's studios in the Royal Arcade Melbourne. In 1885, following the introduction of dry plate photography, he began a series of landscape series, which were commercially successful. As a photographer, he travelled extensively through Victoria, photographing places few of his contemporaries had previously seen. He died in 1918. Reference: Jack Cato, 'Caire, Nicholas John (1837–1918)', Australian Dictionary of Biography.An original, rare photograph from the series 'Views of Victoria: General Series' by the photographer, Nicholas Caire (1837-1918). The 60 photographs that comprise the series were issued c. 1876 and reinforced a neo-Romantic view of the Australian landscape to which a growing nationalist movement would respond. Nicholas Caire was active as a photographer in Australia from 1858 until his death in 1918. His vision of the Australian bush and pioneer life had a counterpart in the works of Henry Lawson and other nationalist poets, authors and painters.‘View of the township of Golden Square’ : Views of Victoria (General Series) No.57 : Albumen silver photograph | Photo on card with Title and Description on reverse | Mounted 24 x 30 cm; Photo 12 x 17 cm.On Reverse: ‘This Township is situated in the Bendigo district, on the road to Castlemaine, and although it is of little importance as a business town, is nevertheless of large importance in consequence of the great number of Quartz Reefs it contains. Almost every house is undermined, and large fortunes have been made by the proprietors. The Church in the distance is that of the Wesleyan body. It was in this township that gold was first discovered in the district of Bendigo.’nicholas caire (1837-1918), golden square (vic), bendigo (vic), gold mining, landscape photography - victoria -
Melbourne Tram Museum
Photograph - Black & White Photograph/s, Keith Kings, 3/04/1996 12:00:00 AM
Photograph, Black and White of Geelong No. 9 being transferred at Byland from one shed to another on 3/4/1996. See note below.In ink on the rear: " TMSV - Lift body of Geelong 29 above the overhead wires and poles at Bylands on 3/4/96. It had been on temporary bogies on No. 6 road will be lowered onto the low-loader semi-trailer on the left for transfer to No. 3 tram shed (not yet connected by track). Has KSK number 372-29trams, tramways, geelong, tmsv, bylands, tram 9 -
Victoria Police Museum
Carte de visite (Thomas McIntyre and Edward Monk), Burman, Melbourne, 1878 - 1882
Thomas Newman McIntyre (1846 - 1918) was the sole survivor of the police party murdered by the Kelly Gang at Stringybark Creek on 28 October 1878. Importantly, McIntyre was later the key witness in Ned Kelly's murder trial. Edward Monk (1844 - 1928) was a selector living in the area, who accompanied the police party sent to returned to collect the bodies of the murdered police. Both men became great friends later in life.Small sepia coloured carte de visite photograph of Edward Monk (standing) and Thomas McIntyre (seated), printed on thin photographic paper.Constable McIntyre sitting. Mr Ted Mond standing (of saw mill)ned kelly, kelly gang, thomas mcintyre, stringybark creek, edward monk -
Vision Australia
Administrative record - Text, Royal Victorian Institute for the Blind annual report 1976-1977, 1975-1976
Articles in annual report include: purchase of a ski lodge with RVIB Ski Club (an independent body) managing the lodge, appointment of new principal P.J. Evans and Matron H McLaren, Sri Lankan association for the blind received older TBMs that were still working but being replaced, National Association for the Blind in Bombay also received TBMs and 3000 tapettes and the Railway Hotel in Windsor topped the hotel fundraising list.1 volume of text and illustrationsroyal victorian institute for the blind, corporation records -
Melbourne Tram Museum
Photograph - Series of 4 - VR tramcar 20, Lloyd Rogers, 1992, 1993 and 2005
Series of four photographs by Lloyd Rogers of Victorian Railways tramcar No. 20 1 - arriving at Preston Workshops - 2/12/1992 2 - The body of VR Tram 20 on stands at Preston Workshops - 1993 3 - the 21E truck from the tram at the Preston Workshops with Lloyd Rogers standing alongside 1993 4 - The 21E truck from VR 20 is being reassembled at Bendigo tram depot 1-2-2005.Yields information about former VR tramcar No. 20 after its recovery.Series of four photograph printed on Kodak paper.Two have details on rear including photo numbervr trams, tram 20, tramcars, preston workshops, bendigo -
Ballarat Tramway Museum
Photograph - Recovery of body of ESCo tram 21, 29-10-1994
Photograph of the team that recovered the body of ESCo tram 21 in Daylesford on 29-10-1994 - See Nov. 1994 issue of Fares Please for details of the recovery and the same photograph. Left to right: Ashley Cronin and his fiancee (the property owners), Len Millar, Darren Hutchesson, John Phillips, Albert Mong, Carolyn Dean, Paul Mong, Richard Gilbert, Gary Wood, Clayton Giles, Warren Doubleday and Jim Parker.Demonstrates BTPS activities and has a close association with those involved.Colour print on Kodak paperDate and photographer details on the rear in ink.btps, tram 21, esco, tram recovery, daylesford -
Melbourne Tram Museum
Photograph - Black & White, AEC Mark III Bus 512 Flinders St, c1970
Black and white print of AEC Mk III No 512 in Flinders Street. with the station building behind. Has route number 246, Fishermens Bend via Ingles St. Photo taken Circa 1970 as the bus has the three number route number but is not fitted with electric turn light indicators. Comeng Body, entered service 1952/53, "Bob-Tailed" to one-man configuration in the 1962/63 conversion batch. Yields information about Flinders St buses serving Fishermens Bend.Black and White photograph - printed on plain papertramways, trams, mmtb, buses, bus 512 -
Wangaratta RSL Sub Branch
Badge
WW2 propeller badges - larger of the two badges has appearance of trench art; the other manufactured Metal badge in the shape of the sleeve propeller worn as a symbol of rank by leading aircraftmen. The main body of the badge has been shaped from one piece of brass.Attached to the centre of the badge is a central boss made from a circular piece of brass. It has an impressed circle in the centre with engraved lines extending from the small circle.Two brass coloured metal badges in shape of a propeller - one badge slightly larger appears handmade (trench art) from silver metal. and has rear clips attached.propeller badge, trench art, ww2 -
The Beechworth Burke Museum
Animal specimen - Budgie, Trustees of the Australian Museum, 1860-1880
The budgie is a very social bird, found in large groups in the wild. They primarily live across mainland Australia. They are often found near water. Budgies are very popular pets globally (called parakeets in other countries). They eat grasses and seeds. They nest in hollowed trees. Budgies in the wild are often right green with a yellow face. This specimen is a good example because it has the common colouring of wild budgies and has not got signs of wear/use. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century. This male budgie is perched with its wings partially opened and looking to the left. It has a yellow head with black stripes on the back, indicating the specimen was quite aged before it was killed. It has a blue nose, indicating it is male. Its body is light green. Its wings are green-yellow with black lines. Its tail is a blue-green. It has some minor pest damage around its eyes.no markings or identification tags -
Warrnambool and District Historical Society Inc.
Instrument - Musical Instrument, Violin and stand, Early 20th Century
This violin was made by Mr Edward Richter who lived in Warrnambool for 78 of his 85 years. he was born 10/03/1853 and was an expert model maker making models of ships. The Warrnambool Museum in 1937 held a model of the Cutty Sark which he had made from timber from the wreck of the Enterprise which was wrecked on Warrnambool beach. Violins were another of of his hobbies.This violin has a connection to Warrnambool through the maker who was a long time resident of the town. It belongs to an era when many people were interested in and turned their hand to making objects such as this.The body of the violin is stained brown in colour with black neck and bridge. The four strings are nylon. The pegs and scroll are timber of a finer grain than the front and back.The tailpiece and end button are black material. The bridge is missing. The stand is rectangular with violin shape cutout, painted in red with a ply backing. Small leather strap on one end. Six large and two small drilled holes around front section.Richter written in large letters on back of standwarrnambool, edward richter, handmade violin, richter warrnambool -
Hellenic Museum
Round Mouthed Jar, 1800 – 1450 BCE
Cypriot White Painted Ware from the Middle/Late Cypriot Bronze Age.The interior with brown band, the angled rim with three sets of lines and wavy line between, a broad band on tall neck, pierced with two string holes, above and below, a broad band on flattened globular body with frieze of vertical lines flanked by wavy vertical lines and alternating with sets of two vertical wavy lines, to broad concentric band, the underside with broad band flanked by sets of stripes. cypriot -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1910
This handmade ‘gallon’ style of bottle was generally used for storing and transporting wine and ale. Many bottles similar to this one have their bases embossed with “6 TO THE GALLON”. It is one of many artefacts recovered from unidentified shipwrecks along Victoria’s coast between the late 1960s and the early 1970s. It is now part of the John Chance Collection. The capacity of this is one-sixth of a gallon (imperial measure), which is equal to 758 ml. (American bottles were often inscribed “5 TO THE GALLON”, which is one-fifth of an American gallon, equal to 757 ml.) Contemporary home brewers can purchase new ‘6 to gallon’ bottles that hold 750 ml. and are sold in cases of 36 bottles, which is equal to 6 gallons of wine. Glass was made thousands of years ago by heating together quartz-sand (Silica), lime and potash. Potash was obtained from burnt wood, but these days potash is mined. The natural sand had imperfections such as different forms of iron, resulting in ‘black’ glass, which was really dark green or dark amber colour. The ‘black’ glass was enhanced by residual carbon in the potash. Black glass is rarely used nowadays but most beer, wine, and liquors are still sold in dark coloured glass. Glass vessels were core-formed from around 1500 BC. An inner core with the vessel’s shape was formed around a rod using a porous material such as clay or dung. Molten glass was then modelled around the core and decorated. When the glass had cooled the vessel was immersed in water and the inner core became liquid and was washed out. Much more recently, bottlers were crafted by a glassblower using molten glass and a blow pipe together with other hand tools. Another method was using simple moulds, called dip moulds, that allowed the glass to be blown into the mould to form the base, then the glassblower would continue blowing free-form to shape the shoulders and neck. The bottle was then finished by applying a lip. These moulded bottles were more uniform in shape compared to the free-form bottles originally produced. English glassblowers in the mid-1800s were making some bottles with 2-piece and 3-piece moulds, some with a push-up style base, sometimes with embossing in the base as well. Improvements allowed the moulds to also have embossed and patterned sides, and straight sided shapes such as hexagons. Bottles made in full moulds usually displayed seam seams or lines. These process took skill and time, making the bottles valuable, so they were often recycled. By the early 20th century bottles were increasingly machine made, which greatly reduced the production time and cost. This bottle is historically significant as an example of a handmade, blown inscribed glass bottle manufactured in the mid-to-late 1800s for specific use as a liquor bottle with a set measurement of one-sixth of gallon. It is also historically significant as an example of liquor bottles imported into Colonial Victoria in the mid-to-late 1800s, giving a snapshot into history and social life that occurred during the early days of Victoria’s development, and the sea trade that visited the ports in those days. The bottle is also significant as one of a group of bottles recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection of shipwreck artefacts by his family, illustrating this item’s level of historical value. Bottle, brown glass, handmade. Tall slim Gallon style liquor bottle. Applied, double collar lip; square upper with flared lower. Neck has seams and shoulder seam from 3-piece mould. Body with horizontal ripples tapers inwards to base. Push-up base with pontil mark and embossed inscription. Tape over wire around mouth. Cork remnants inside mouth. Embossed on base "6 TO THE GALLON"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, 6 to the gallon bottle, handmade, dip mould, mouth blown, pontil mark, blown bottle, liquor bottle, ale bottle, double collar, 19th century bottle, collectable -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1910
This handmade ‘gallon’ style of bottle was generally used for storing and transporting wine and ale. Many bottles similar to this one have their bases embossed with “6 TO THE GALLON”. It is one of many artefacts recovered from unidentified shipwrecks along Victoria’s coast between the late 1960s and the early 1970s. It is now part of the John Chance Collection. The capacity of this is one-sixth of a gallon (imperial measure), which is equal to 758 ml. (American bottles were often inscribed “5 TO THE GALLON”, which is one-fifth of an American gallon, equal to 757 ml.) Contemporary home brewers can purchase new ‘6 to gallon’ bottles that hold 750 ml. and are sold in cases of 36 bottles, which is equal to 6 gallons of wine. Glass was made thousands of years ago by heating together quartz-sand (Silica), lime and potash. Potash was obtained from burnt wood, but these days potash is mined. The natural sand had imperfections such as different forms of iron, resulting in ‘black’ glass, which was really dark green or dark amber colour. The ‘black’ glass was enhanced by residual carbon in the potash. Black glass is rarely used nowadays but most beer, wine, and liquors are still sold in dark coloured glass. Glass vessels were core-formed from around 1500 BC. An inner core with the vessel’s shape was formed around a rod using a porous material such as clay or dung. Molten glass was then modelled around the core and decorated. When the glass had cooled the vessel was immersed in water and the inner core became liquid and was washed out. Much more recently, bottlers were crafted by a glassblower using molten glass and a blow pipe together with other hand tools. Another method was using simple moulds, called dip moulds, that allowed the glass to be blown into the mould to form the base, then the glassblower would continue blowing free-form to shape the shoulders and neck. The bottle was then finished by applying a lip. These moulded bottles were more uniform in shape compared to the free-form bottles originally produced. English glassblowers in the mid-1800s were making some bottles with 2-piece and 3-piece moulds, some with a push-up style base, sometimes with embossing in the base as well. Improvements allowed the moulds to also have embossed and patterned sides, and straight sided shapes such as hexagons. Bottles made in full moulds usually displayed seam seams or lines. These process took skill and time, making the bottles valuable, so they were often recycled. By the early 20th century bottles were increasingly machine made, which greatly reduced the production time and cost. This bottle is historically significant as an example of a handmade, blown inscribed glass bottle manufactured in the mid-to-late 1800s for specific use as a liquor bottle with a set measurement of one-sixth of gallon. It is also historically significant as an example of liquor bottles imported into Colonial Victoria in the mid-to-late 1800s, giving a snapshot into history and social life that occurred during the early days of Victoria’s development, and the sea trade that visited the ports in those days. The bottle is also significant as one of a group of bottles recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection of shipwreck artefacts by his family, illustrating this item’s level of historical value. Bottle, brown glass, handmade. Tall slim Gallon style liquor bottle. Applied double collar lip; square upper and flared lower. Neck has seams and shoulder seam from 3-piece mould. Body tapers towards base. Push-up base with pontil mark and embossed inscription. Base is uneven. Mouth has remnants of the seal in it and tape remnants around its outside. Embossed on base "6 TO THE GALLON"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, 6 to the gallon bottle, handmade, dip mould, mouth blown, pontil mark, blown bottle, liquor bottle, ale bottle, double collar, 19th century bottle, collectable -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then formed into the flared collar. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive glass, cork-top style. Applied flared lip, slightly bulbous neck with horizontal lines in glass. Shoulder has seam, body tapers inwards towards base. Heel is thick, with concave base, wide inverted pontil, uneven base. Glass has some bubbles, blow lines and imperfections. Sediment inside bottle along one side. Surface of glass is scratched.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, olive green glass -
Warrnambool and District Historical Society Inc.
Bottle, Antarctic Ice Milk Bottle, Mid 20th century
These two bottles have contained milk sold by the Warrnambool firm of Antarctic Ice Pty Ltd. in the mid 20th century.In the 1930s a pasteurizing plant was set up in Warrnambool in conjunction with an ice works in Kepler Street known as Antarctic Ice (Good and Stevenson). This firm had secured a milk supply from farmers in the Warrnambool region. Eventually Antarctic Ice was bought by the Warrnambool Cheese and Butter Factory and Kraft Foods as equal partners and the milk was marketed as Sungold. Also a farmer named Kaye Ryan had set up a pasteurization plant in East Warrnambool (Raglan Parade/Verdon Street) in opposition to Antarctic Ice and Sungold. Kraft and Warrnambool Cheese and Butter bought out Ryan and moved Sungold operations to the Ryan site. Kraft Foods sold its share of Sungold to Warrnambool Cheese and Butter and in 1989 the milk factory was moved to the Allansford site of Warrnambool Cheese and Butter and Sungold continues there today.These bottles are of interest, firstly as examples of the half-pint milk bottles familiar to people living in the mid 20th century and secondly because they are good examples of the bottles used by an important Warrnambool business, Antarctic Ice. These are two clear glass bottles. When filled each bottle contained 10 fluid ounces or half a pint of milk. The bottles have a round base with a rounded body tapering slightly to a thick neck and a thick moulded top. The bottles when filled had a seal consisting of a circle of waxed cardboard that was pressed into a recess on the lip of the bottle. These lids are missing.The bottles have lettering impressed into the glass. ‘This bottle contains milk bottled for sale by Antarctic Ice Products Pty Ltd Warrnambool and always remains their property. It is loaned and cannot be legally used or sold by others.’ ‘Contents 10 ozs.’ ‘497’ milk production in warrnambool, antarctic ice pty ltd -
Warrnambool and District Historical Society Inc.
Ledger Letter Book, 1871-1875, Swintons Stock book 1867, 1860s
This ledger is a Warrnambool Swintons Store stock book and contains the sales of stock from January to August 1869. William and Ann Swinton migrated to Australia in 1854 and for a decade William Swinton worked as a builder and carpenter in the Warrnambool area, erecting many buildings, including the Wangoom Presbyterian Church. In 1865 he opened a shop in Timor Street Warrnambool, selling groceries, china, glass and hardware. In 1888 the business was known as William Swinton and Sons. Branch shops were opened in Cudgee, South Warrnambool, West Warrnambool, Wangoom and Nullawarre. When William died his son Robert became the first managing director of Swintons Pty Ltd. In 1934 the business split in two with George Swinton and Sons selling furnishings, clothing and glassware and Swintons Pty Ltd selling seeds, hardware and produce. Today the Swinton family still operates a furniture and bedding store in Timor Street.This ledger is of great importance as it is a very early memento of the Swinton stores in Warrnambool. It dates from only four years after the founding of the Swinton store in 1865 and gives us lists of products sold, the names of the buyers and the prices of the goods – a great source of information for researchers and all those interested in Warrnambool’s business history. The current Swinton business in Timor Street is the oldest family business in Warrnambool and, with the Swinton name associated with businesses in Timor Street for 152 years, is among the oldest family businesses in Australia. This is a ledger with a cover of brown paper lined with heavy-duty cardboard. The insides of the cover have a mottled brown and blue patterning. Both the cover and the inside patterning are much torn and parts of the cover are missing. The cover is almost detached from the body of the book. The pages are blue and have red lines for entry purposes. The entries are handwritten in black ink. The pages are mostly intact but they are very stained and the edges are tatteredswinton family, warrnambool, history of warrnambool -
Woodend RSL
Army Water Canteen, Late 20th Century
Representative of military issued accoutrements, possibly Australian Army, late 20th Century. Army water canteen, possibly Australian Army issued, with olive green fabric insulating cover featuring flaps with stud fasteners, black twist top lid attached to aluminium body fixed by aluminium chain that is attached both to base and top of lid. Back of fabric cover has a metal prong threaded through a strong fabric loop which has been sewn on for attaching to a belt. Tag on back sewed on which reads 'Made in Japan'. flask, canteen, military, military accoutrements