Panel saw with tapering blade and small corrugations, wooden handle affixed with brass rivets. Borer holes in handle. Surface rust and pitting on steel.DISSTON [on brass plaque on handle]

Used for straight cutting along the grain of thick timber, rip saws were typically 24 to 28 inches long with 3 to 6 points (ripsaw teeth) per inch along the length of the steel blade. The saw’s closed timber handle is positioned above the heel of the saw and the blade tapers along its length to a narrow toe. The cut made by the saw, the ‘kerf’ is wider than the thickness of the blade as the bent teeth take out small pieces of wood, or sawdust. The kangaroo brass stamp indicates the saw originated from Robert Sorby and sons’ Kangaroo Works, in Sheffield, UK. The kangaroo brand emerged in the early 1800’s and was used extensively until the 1980’s.Tapered steel blade with corrugations and scalloping on cutting edge, affixed to a sturdy wooden handle by brass rivets. Some surface rust and borer holes.KANGAROO [on plaque on handle]rip saw, woodworkers tools, churchill island, amess barn

Cast steel straight edged blade affixed to a walnut handle with brass rivets. NONPARIEL [on plaque] [elephant trade mark on handle and blade] W.T. JACKSON SHEFFIELDtennon saw; churchill island; amess barn

Bronze saw set with steel fittings and red paint on jaw. Meant for smaller sawsEclipse No 77 Made in Englandchurchill island, saw set, eclipse, tool

Incomplete. Bronze saw set with no fittings except striker. Red paint spots.Eclipse No 77. Made in Englandchurchill island, saw set, tools

steel saw set with pliers style handle, and spring.churchill island, tool, saw set

Forged by a blacksmith, Farrier's nippers are used to cut the hoof wall to the correct length for each horse and used to bevel the edge of the hoof before rasping. Blacksmith's made black iron complete. Split end one handle; knob end other handleStamped: "7"farrier, equipment, stable, equine, equine care, churchill island

Steel. Curved blades for cutting straight line on curved surfaces. Rivet rather than screw. Paint mark on one blade.churchill island, tool, tin snip

Straight blades. Damaged end of one handle. Surface rust.churchill island, tool, tin snips

This horse hide strop was traditionally used to sharpen and polish straight edged razors, although it could be used for kitchen knives or chisels. The metal loop was designed to be hung onto a nail or peg, and the person held onto the handle and pull the strop taut. The razor was sharpened by drawing the spine down along the strop, so no pressure placed on the blade. Once the razor reached the bottom of the strop, it was flipped and drawn upwards. This process required skill, although it could be done at a great speed. Keen Kut was an American brand that sold razors, strops, and safety brands. Double sided, two strips. Metal ring one end, padded stitched handle at other. Horse hide.KEEN KUT /GENUINE HORSE HIDEchurchill island, strop, horse hide, tool, kleen kut

The ear punch is used to create a hole in the ears of domestic livestock such as cows and sheep so an identification tag can be applied. The variety of tags available these days are very important for identifying, monitoring, and managing individual animals and herds. Livestock ear tags were initially developed in England in 1799 under the supervision of Sir Joseph Banks, President of the Royal Society, for helping to manage the Merino sheep in the flock established for King George III. They have been in widespread use all over the world ever since.Steel. Two handled. Return spring missing. Apple shaped punchcattle, ear punch, farm, tool, churchill island

Tape measure cases were designed to house a tape measure to enable the measuring of distances, usually for a building project. This case would have been produced after 1877 when John Rabone and Sons were registered. This case probably had a cloth tape measure with inches marked on one side and sometimes they had poles marked on the other (1pole measured 198 inches, or 500cm). The tape was usually pulled out to measure and then wound back into the case Leather and brass circular case. No measuring tape inside. Stitched case.JOHN RABONE & SONS BIRMINGHAM ENGLAND. "Cemetary" scratched on back.tape measure, building, churchill island

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.Steel. Designed with bow in middle of blade. Small offset. Original ends in good conditions. No handles.churchill island, crosscut, saw, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.one end original minus handle. Other end has replaced handle. Steelchurchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, increasing efficiency.double ended steel saw with "M" patterned teeth. Handles missing. All rivets in placechurchill island, crosscut, saw, tools, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.single handed cross-cut saw. Peg grip missing?circular brass manufacturer's plate: SPEAR & JACKSON Sheffield. Crown symbol.churchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” steel blade, wooden handle and peg grip. Single person sawcrosscut, saw, churchill island, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Two handled cross cut saw. One manufactured handle and one bush replacement wedged with three inch nail. 6 broken teeth. Rivets for handle broken off at home-made end. M shaped tooth profile.churchill island, crosscut, saw, tool

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe was manufactured by W.A Tyzack & Co. Ltd. Set up by William Tyzack in the early 1800s in Sheffield, United Kingdom, they grew into a larger manufactory specialising in agricultural tools. Adding the ‘Horseman’ brand to their trademark in 1948, they expanded dramatically and exported throughout the Commonwealth.Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Cast steel blade. Hole on back and of blade for hanging. Steamed handle (may not be original). Complex pipe/nut washer and five metal shims keeping blade on handle.From tip: BEST CROWN W.A. TYZACK & CO. LTD STELLA WORKS SHEFFIELD. Near handle: image of figure on horse.churchill island, scythe, wa tyzack, sheffield, machinery

Flat head screwdriver with surface rust, and a black wooden handle; paint worn off handlechurchill island, tool, screwdriver

Set of eight twist drill bits in variety of sizes and diameterschurchill island, tool, drill bit

Set of five rusted counter sink bits, with tapered proximal ends and mushroom-shaped distal sectionschurchill island, tools, countersinking bit

Two centre bits with a central projecting point and two side cutters on the distal ends. Proximal ends are tapered.churchill island, tool, centre bit

Two screw driver bits with a tapered proximal end and a flat head, some paint spots and surface rust evident.BLACKMANS ENGLANDchurchill island, screw driver, bits, tools

Two steel spoon drill bits with a tapered proximal end, and a beveled and distorted distal end. Surface rust and paint spots.NEUMANS GERMANYchurchill island, drill bit, spoon drill bit, tool

Auger bits fit into the jaws of a hand brace (brace and bit), which is used to bore holes into wood. The tapered end, or tapered shank, fits into the brace, while the twisted shank and twisted point draw the bit into the wood. The twisted shank guides the bit into the wood, helping to remove chips produced by the cutters and enabling the user to bore deep straight holes. The collection pictured here includes two common patterns of twist bits: the ‘Jennings’ double twist pattern; and the ‘Irwin’ single twist pattern. Their finely pitched threaded points are typically used to cut hardwood timber.Set of thirteen auger bits, with tapered proximal ends and corkscrew spiraled distal ends. Some with tight and loose spiral patterns. Paint spots and surface rust.[size of each bit stamped on]churchill island, tool, auger bits

Brass octagonal ring spanner with straight handle, and a small hole bored into the end. To go with the Essex car, churchill island, tool, ring spanner

Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Curved blade, painted black. Wooden limb handle, varnished, some white paint spots. Nail into handle in blade holder sleeve. Slight bulge in handle near blade holderchurchill island, fern hook, olinda, mount dandenong, nilma north

Long corkscrew auger, with fused cast iron chuck and eight twists in the steel. Chuck: "2" Auger "16" "IRWIN MADE IN USA" churchill island, auger, tool