"Herbert Rex WILLIS" Reg No. 342872 Service Details. Refer Cat No. 5231.31. Jacket - Khaki colour, wool serge fabric, Battle dress style, belted at the waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder insignia - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia on sleeves - brown, white and red, - Warrant Officer Second Class. Service Ribbons above left pocket L-R, Vietnam Campaign Medal. Long Service Medal, South Vietnamese Medal with clasp "60-". Light khaki colour cotton twill fabric lining. Manufacturers white cotton twill fabric label - inside on left pocket lining. 2. Lanyard - dark blue colour cotton cord with knots. 1. Manufacturers information on label - black ink print "REGIMENTAL NO./ NAME", Red ink print "M.TX/IZE 5". On pocket lining - purple ink "D^D/ MADE IN AUSTRALIA/ 1954. On collar lining - handwritten, black ink pen "WILLIS" .uniform, army, battle dress, rex willis

As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Woolen khaki peaked hat has a central head band with solid peak connected to the lower front of the head band. The top is high at the front and protrudes out from the headband about 3cm on all sides. There is a brown leather chinstrap on the lower front of the headband above the peak and this has a slide extension that can be enlarged to go under the neck to keep the hat in position in high winds. The chin strap in connected to the headband with two plastic button that have queens crown above a map of Australia. Affixed to the front of the headband above the peak is the Artillery Corps metal hat badge in gold colouring. The interior of the top of the hat has a cotton lining under the woollen exterior and then a plastic protective lining to avoid sweat bleeding onto the exterior. A cloth badge with the makers name sewn to the cloth lining and covered by the plastic protective layer. uniform

The cartoon was drawn by John Nathan, one of the final year students in the first class to graduate with the diploma of Licentiate of Optometric Science from the Australian College of Optometry. His father was Bertram Nathan who played important roles in obtaining registration of optometrists in 1934 and on the Council of the College. John was to become Director of Studies from 1950 to 1964 and President of the College from 1969 to 1978. He also paints in oils.This cartoon is significant to the Australian College of Optometry as a piece of memorabilia from the class of 1944. It is one of only two drawings of optometrists in the Kett collection.Framed ink on paper cartoon drawing of final year Optometrical Science students of 1944 in Melbourne. The characters are depicted playing in an optometric consulting room. It is headed 'Final Year Optometrical Science 1944' and at the lower edge are the names of the students 'John Nathan, Tony "Craniclaw" Douglas, Vans Ovenden and Doug Allen'. Signed by the artist 'John Nathan'.This cartoon drawing depicts final year Optometry students in a contemporary consulting room of 1944. They are shown in typical optometrists' attire of dark trousers, side-buttoning short white coats and PD ruler in the breast pocket. The room has an electric instrument stand, hydraulic patient chair and internally illuminated test chart. The drawing shows the artist's name 'John Nathan' and is mounted in a black frame.Signed by the artist 'John Nathan'students, optometry, optometrical science, cartoon, drawing

Mid blue waist length long sleeved jacket to be worn over 11400.522 11cm fold over collar that extends to waistline with crossover front and scalloped lapels. Right over left crossover (3.5cm) fastened with one fabric covered 2.4cm button with centre circle and narrow edge. Lapels have decorative cut out lace motifs attached – match lace across midriff of dress. Ten motifs evenly spaced around collar. Front pieces have vertical darts from hem under bust. Back of bodice has two pieces with centre seam. Vertical dart on either side of the centre seam. Unlined. Machine made. Kimono sleeves. Three quarter length. Gusset under each arm 12 x 13cm. Part of ensemble with 11400.522.Created by ZANKO of Melbournecostume, female daywear, coat

Clothing. Infant's cream coloured silk coat with yoke front and back. Fold over collar (12 cm) with embroidered flowers on the front with embroidered zig zag edging. Round neckline with casing threaded with 1.8 cm patterned silk ribbon. Yoke sections lined with cotton fabric. Long sleeves gathered all shoulders, with embroidered pattern at wrist with 1.7 cm lace trim. Full length front opening with embroidered zig zag edging that continues around hemline of garment. Floral embroidered patterns across the back of the skirt above the hemline, and at the lower corners of the front panels. Front opening fastened with silk ribbon ties at neckline and one X 1.5 cm button at lower edge of yoke. Gathered skirt is unlined.costume, children's, infant's cream coloured silk coat

Clothing. Very fine, cream linen bodice, with two vertical lace inserts either side of front opening, and three angled inserts from each side seam to the vertical insert. All inserts 2 cms wide. Short cap type sleeves are edged with the same lace, and band of this lace also outlines the wide square neckline. An insert between these bands has a fine, ribbon threaded through, which would act as a draw string. There is a 2.5 cm x 3 cm tab of linen at the centre back, but, no markings are evident. Three .9 cm pearl buttons, with three corresponding machine stitched button holes fasten the front. A cotton tape drawstring, and elastic are encased at the waistline giving the lower edge a peplum effect.costume, female, cream linen bodice

Clothing. Twelve shaped panels form the body of the jacket, which is dramatically ''shaped in'' at the waistline, and flared out toward the hipline. Four black fabric covered buttons form the closure, with hand-stitched button holes, all ''hidden away'' under an overlay of the beaded velvet, of which the jacket is made. The long sleeves, narrow at the elbow, flair out to an embroidered and beaded cuff, 35 cm in circumference. Sleeves are gathered at the shoulderline, giving fullness, and featuring an elaborate ribbon, cord, and beaded embroidery. The embroidery is repeated around the revere collar, and on the right-hand side of the bodice, and the full length of the back of the garment, and around the hemline, and also trims the opening edge of the left-front bodice. Lined with black silk. It feels as if there is extra to support beaded areas.GEORGE STIRLING & SONS, THE RICHMONDcostume, female, black velvet long sleeved jacket

Blazer World Swimming Championships California 1975. Dark green single breasted wool blazer. Fastened with one 2cm metal button. Three external front pockets. LHS breast pocket (13 cm X 13 cm) embroidered with Australian Coat of Arms ''Amateur Swimming Championships Manager 2nd World Championships CALI-1975''.Two pockets below waist level (18 cm X 21 cm) have decorative turned down hem across top of pocket. Two internal pockets in lining - LHS with zipper opening, RHS with slit opening. Back centre vent (30cm) with stitched down half belt across back above vent (5cm X 37 cm). Padded shoulders. Fully lined with leaf green satin.''By A.W.S.Huntington Sydney.costume, male, dark green blazer.

World War 2 Army uniform jacket worn by Captain Noel WestWorld War 2Army khaki tunic with cotton lining, sleeves have striped lining. Tunichas 2top pleated pockets with pointed flaps. Two more large expanding pockets with on bottom,4 buttons with Australia map and Aust Military Forces on front with one each on pocket. Shoulder strap has pips. One Australia badge and one AMF button on each side. Lapels have a rising sun badge on each lapel. Back has one pleat on bottom of jacket. Belt has rectangle buckle with 2bottom waist adjusters. Sleeve has a vee shape on cuff. Right sleeve has 2 vee stripes (long service) In pocket envelope with piece of ribbon from 1939/1945 Star, Pacific Star, and efficiency medalcostume, male uniform, military

3044.1 SEC (Geelong) Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior. Black plastic peak fitted with cap or with four holes for the employee badge number in the centre of the cap above the hat band. Sewn on the inside is a label "Commonwealth Government Clothing Factory Melbourne" and stamped "7 3/8". The plastic band at the front half of the cap terminating in two small SEC metal buttons on either side is not present. The holes for this are not visible - may not have been present on Geelong caps? 3044.2 - two small SEC Button badge - nickel plated silver with "Stokes" "Vic" stamped on rear. See also Reg. Item 2894 for a Ballarat Cap. On inside of leather hat band in ink "Mr. R. Evans" and "90 Albert St. West Geelong".tramways, trams, uniforms, cap badge, cap

Mr. John Rossiter is the Minister of Health of Victoria. The RDNS Sisters are wearing their uniforms of grey dresses, red cardigans and grey peaked hats. The RDNS badge on their hats are made of metal with a royal blue circle containing the letters "Royal District Nursing Service". The inner section is divided in three parts; the upper and lower sections are silver and the centre section has the capital letters RDNS written in royal blue across it.Black and white photograph showing seven Royal District Nursing (RDNS) Sisters, four only partially seen, walking along a footpath with Mr. John Rossiter. Mr. Rossiter, who is in the centre of the photograph and group, has balding dark hair and is wearing a white shirt, striped tie, and a dark striped suit with a white flower in the button hole on his left lapel; a corner of a white handkerchief is seen in the left pocket of his jacket. The full view of three RDNS Sisters can be seen wearing their uniforms of a grey frock and dark cardigan and grey peaked hats with a round badge in the centre. In the background are some cars on the road, lamp posts and some trees. A white fence and a brick house with a tiled pitched roof is seen in the right hand side background.Photographers stamp. Quote No. KG 48royal district nursing service, rdns, rdns uniform, mr john rossiter

Pressed metal uniform badge for the Melbourne Tramways Board, workshop staff, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "Car Works" and number "25" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with wire. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons.trams, tramways, badges, employees pass, tb, workshops, tramway board

The Optacon OPtical-to-TActile-CONverter is a compact, portable reading aid for the blind. It is about the size of a textbook, and weighs less than 2kg. It works by converting a printed image into a tactile image that a blind person can feel with one finger. After a period of training and practice, a blind person can use the Optacon to read ordinary books, magazines, newspapers, and other printed materials. The Optacon was developed after intensive research at Standford University, California, USA and was trialed by clients of the Royal Victorian Institute for the Blind (now part of Vision Australia) in 1973. It has three main sections: 1 a miniature camera, 2 an electronics section, and 3 a tactile stimulator array. The miniature camera, about the size of a pocket knife, is mounted in a housing that has rollers for easy movement along a line of print. The camera is connected to the electronics section by a lightweight cable. The electronics section and the tactile stimulator array are in the main chassis. The array consists of 144 tiny metal rods arranged in six vertical columns and 24 horizontal rows. Each of the rods can vibrate independently. The tips of these rods protrude through holes in a concave finger plate where the index finger is placed flat in order to read. These three components act together to convert the image of a printed letter or other shape into a pattern of vibrating rods, a tactile image of the letter or shape. The letter shape is tactually perceived as an image that moves from right to left on the finger, showing the left or leading edge of the letter first. Letters are felt sequentially rather than all at once, and the image should be kept moving. The Optacon converts a printed O into a tactile form that resembles a crater with a vibrating rim -- a completed circle. C would have a gap or opening on the right side of the curve. The letter F would be felt, sequentially, as a vertical line with two trailing horizontal lines. Because it can convert any ordinary printed image into a corresponding tactile image, the Optacon is not restricted to any special typestyle or language. The camera has a zoom lens that compensates for differences in the size of type. The standard Optacon lens can accommodate type sizes from 6 point to 20 point. With the optional F4A magnifier lens, type sizes as small as 4 point can be read. Powered by a rechargeable battery, and comes with its own battery charger. The battery is contained within the main chassis, and is not removable by the user. There are four basic controls on the Optacon: the Magnification Adjustment zoom button located on the camera section on the side opposite the rollers; and the On-Off switch, the Stimulator Intensity Adjustment knob, and the Threshold Adjustment knob located on the right side of the front panel. The Circuit Breaker protrudes from the right-hand wall inside the chassis compartment. From left to right when the back panel is facing you, are located: the jack for connecting the battery charger; the Battery Check button; the Normal-Invert switch; and the Input/Output I/O connector for use with the Visual Display, when using the Repeater Cable to connect two Optacons to one another or with other accessories. Designed not be removed from the leather case during normal operation, the On-Off switch is a slide switch located on the right side of the front panel. It slides up and snaps into place in the on position. 1 black with orange front, rectangular device in leather case assistive devices, audio equipment

A cigarette lighter is a portable device used to generate a flame. It consists of a metal or plastic container filled with a flammable fluid or pressurized liquid gas, a means of ignition, and some provision for extinguishing the flame. A spark is created by striking metal against a flint, or by pressing a button that compresses a piezoelectric crystal (piezo ignition), generating an electric arc. In naphtha lighters, the liquid is sufficiently volatile, and flammable vapour is present as soon as the top of the lighter is opened. Butane lighters combine the striking action with the opening of the valve to release gas. The spark ignites the flammable gas causing a flame to come out of the lighter which continues until the top is closed (naphtha type), The Beney Company was founded by Robert Ernest Beney of London, England. R. E. Beney invented and marketed the first Beney mechanical lighter in 1919. Beney also designed and manufactured numerous luxury lighters and striker boxes for Alfred Dunhill of London as well as Hermes of Paris. In 1938, Beckenham based Beney Lighters was acquired, adding utility lighters and precision tools to the company's (Winn & Coates) ever growing list of products. The biggest selling line manufactured by Beney was the Economic Gas Lighter which hung on the side of housewife's gas cookers and was also used for lighting Bunsen burners in laboratories. In 1939-1940 the company moved its administration to the Beney Lighter premises in Beckenham after the Head Office at Trinity Square along with many company records were destroyed in a 'doodlebug' flying bomb attack. Beney Ltd. continued producing lighters at least through the late 1954. A green metal cigarette lighter that used fuel and a striking action arm to produce a flame .base: BENEY / COMPANION / PATENT 568897 / BRITISH MADEtobacco, cigarettes, cigarette lighters, fuels, moorabbin, cheltenham, bentleigh, early settlers, beney pty ltd, beckenham england

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button. These were the first behind the ear hearing aids manufactured by the National Acoustic Laboraties (NAL) in Australia Body worn hearing aid consisting of separate pieces, one for each ear with attached ear mould, for one ear, in original box. Provided and manufactured by the NAL (National Acoustic Laboratories), part of the Commonwealth Department of Health. "NAL" in centre of stylised map of Australia. "COMMONWEALTH/DEPARTMENT OF HEALTH" on inside of box. "IV" and "F.McD/RIGHT" manually etched on hearing aid. "II" manually etched on other hearing aid. "CAL AID H" inscribed on inside edge of hearing aid.

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button. Single Behind-the-ear hearing aid with ear mould. "BOSCH/GERMANY" on the side bottom of aid, "7327476" on face, "46AYG-D" on inside edge

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button.These were the first behind the ear hearing aids manufactured by the National Acoustic Laboraties (NAL) in Australia Single behind-the-ear hearing aid.

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button. Silver metal case with side clips and hearing aid attached. Has battery compartment for AA batteries. Volume control is the top left hand corner. "C OF A/CALAID/36778" on back of case deaf children australia, hearing aid, calaid

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button. Silver metal case with side clips and hearing aid attached. Has battery compartment for AA batteries. Volume control is the top left hand corner. Comes with its black case "C OF A/CALAID/101862" on back of case. "ANGUS & COOTE/Acoustics/HEARING AIDS" on inside cover of case

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button. Square, silver metal hearing aid with electronics and AA battery compartments. Has an ear piece and ear mould attached by wire, with a volume adjustment. A body level type, probably a CALAID T manufacture from 1955 to the 70's. On front "C OF A/CALAID/108499" deaf children australia, hearing aid, calaid, commonwealth of australia

Northern District School of Nursing nurse's base uniform 1950s - 70sTwo white caps without frill denotes first year nurse. Three white caps with frill denotes 2nd year nurse. Two white caps with blue stripe above frill denotes 3rd year nurse. One white cap with brown stripe above frill denotes third year after uniform changed in July 1974.Brown stripe cap has 'Leung BBH' on central mitre in black marking pen. One blue stripe cap has 'Kelly" ? and 'NTI along central mitre. A second blue stripe cap has 'Freeman' in black marking pen on LHS mitre. One white frill cap has 'M.S.Anderson", a second white frill cap had 'N.T.' in marking pen and a button affixed to the central mitre. A third white frill cap has an embroidered name strip with 'K. Woodman in blue and 'B.B.H.' in black marking pen on the central mitre. One plain white cap has jumbled marking pen lettering 'NT 2NT3 NT3 on bottom RHS and a buttonhole to top of each mitre. A second plain wite cap has a buttonhole to top of each mitre.nurses uniform, northern district school of nursing, cap

DPCU (Disruptive Pattern Camouflage Uniform) work dress. Colours light to dark green through to light to dark brown. Cotton/polyester fabric. Dark green colour plastic buttons. 1. Shirt - new style, collar, one front epaulette, two front pockets with nylon/metal zipper closure, two sleeve pockets with concealed button closure flaps. White polyester fabric. Manufacturers label, back below collar. Print illegible. 2. Trousers - new style. Two side pockets, two large patch side pockets with nylon metal zipper, one back pocket. Belt loops and nylon/metal zipper fly. Khaki colour cotton fabric pocket lining. White polyester fabric manufacturers label on front right pocket lining. Ankle elastic drawstring.Manufacturers information on label - black ink print. 2. "ADA/ VICTORIA 2008/ ^ / SPECIFICATION ARMY (AUST) 6542/ NSN 8415 66 152 1054/ SIZE 85R/ NAME/ SERVICE NO/ 75% COTTON 25% POLYESTER/ WARM MACHINE WASH 40 deg c/ RINSE WELL WARM IRON/ DO NOT IRON OVER HOOK AND PILE/ DO NOT BLEACH/ DO NOT STARCH/ MAY BE TUMBLED DRY 40dc/ MADE IN AUSTRALIA."uniform, army, work dress, dpcu

1. Jacket, khaki colour, wool/polyester fabric, service dress style with gold colour plastic buttons with metal shank and split rings. Buttons have raised emblem RAEME. Collar, shoulder epaulettes, four front pockets, top two with buttons and two metal press studs on flap, lower button down flap. Two lapel badges - metal RAEME. Rank insignia patch on sleeves - crown - Warrant Officer 2nd class. Green colour polyester fabric lining with white cotton manufacturers label. 2. Trousers, khaki colour, wool/polyester fabric, service dress style with fob pocket, two side pockets and one pocket. Green colour polyester fabric lining to waist and pocket with manufacturers white cotton label inside one back pocket.Manufacturers information on labels - black ink print. 1. & 2. "CARBONE APPAREL/ VICTORIA/ ^/ DRY CLEAN ONLY/ RE-PRESS USING IRON AND/ DAMP CLOTH OR MEDIUM/ TO HOT STEAM IRON/ CREASE UPPER HALF OF LAPEL ONLY/ SERVICE NO./ NAME" Handwritten blue ink pen "11.6.80/ ENNST G.A." uniform, army, service dress

The Bronze Medal and Certificate of Merit of the Royal Humane Society of Australasia were awarded to James Patten for the bravery he displayed on 18th April 1890, and presented to him on 21st May 1890. The Royal Humane Society of Australasia was founded in 1874 with the aim to recognise those who risked their lives to save others and to assist those whose acts of bravery caused them or their surviving dependants to be disadvantaged in some way. Details of the incident were published in the Argus, Saturday 19 April 1890, page 11 - "FATAL BOATING ACCIDENT, (BY TELEGRAPH FROM OUR CORRESPONDENT.), WARRNAMBOOL, FRIDAY A fatal boating disaster occurred in Lady Bay this morning, the victim being Joseph Lowe, licensee of the Bay View Hotel, South Warrnambool. The deceased, in company with two lads named James Ferrier and James Patten, went out in a small dingy to shoot musk ducks. The water was perfectly smooth, and the party were tempted to proceed as far as the mouth of the Hopkins River. In their eagerness they neglected to keep clear of the breakers, and were presently carried in on the crest of a large wave, and the boat cap sized within a cable's length of the shore, precipitating the occupants into the water. Patten and Lowe stuck to the overturned boat, Ferrier striking out for the shore, which he reached in an exhausted state. In the meantime his companions had been washed off the boat, and were struggling in the breakers. Lowe was unable to swim, and Patten kept him afloat, at the same time making gallant attempts to get him ashore, but finally had to leave him to his fate. Ferrier, seeing Lowe's danger, undressed and swam out, but became exhausted. Ferrier and Patten were both found in a fainting condition by persons who saw the catastrophe from the jetty, and ran along the beach to render assistance. Attempts were subsequently made to rescue Lowe's body, which could be seen washing abort in the surf. These proved unsuccessful, and no hope is now entertained of recovering it. Lowe was a smart young man, 28 years of age, and unmarried. He was formerly bar-man at the Commercial Hotel here, having been engaged in Melbourne ..." This medal recognises the bravery of James Patten, a local citizen who risked his life to save the life of his friend Joseph Lowe whilst at sea and was recognised for this act by the Royal Humane Society of Australasia.Medal awarded to James Patten by the Royal Humane Society of Australasia for his bravery on18 April 1890 and presented to him on 21 May 1890. Bronze medal in hard black rectangular case. Lid and base have centre hinge and brass spring button catch. Case is padded and lined with blue silk and has a fitted hook. The round medal has a bronze bar with pin closure, dark blue, braided ribbon with brass swivel mount. The case has a gold embossed rectangular border on the lid and base. Embossed inscription on lid. The obverse shows a woman on the left in long robe placing a wreath on the head of a kneeling man at right, with the five stars of the Southern Cross constellation above his head. A motto is inscribed around the edge. The reverse has inscriptions around the edge, a wreath of two overlapping olive branches, and engraved text.OBVERSE: Embossed around "VIRTUTE PARATUM" REVERSE: Embossed on the medal around the edge "ROYAL HUMANE SOCIETY OF AUSTRALASIA INSTD. A.D. 1874", in the centre "AWARDED TO" Engraved in the centre "James Patten/ 18th April / 1890" CASE LID: "PRESENTED BY / THE ROYAL HUMANE SOCIETY / OF AUSTRALASIA / TO / JAS. PATTEN. / 21ST MAY 1890."flagstaff hill, warrnambool, flagstaff-hill, maritime museum, maritime village, shipwreck-coast, flagstaff hill maritime museum & village, bronze medal 1890, royal humane society of australasia, james patten, medal, australian award medal, commemorative medal, numismatics, life saving, lifesaving, rescue, bravery, drowning, joseph lowe, james ferrier, lady bay, hopkins river, boating accident, certificate of merit, north eastern bight

White child's dress of heavy cotton lace. Sleeveless bodice with arm holes edged with 3cm ungathered broderie type lace. High round neckline with 5cm lace flat collar. Back opening to waist with 5 x 1cm white buttons. LHS is seamed with buttons attached. RHS edge has button holes pushed through edge of lace. 5mm cotton tape is threaded through seam at neck line to form ties at the back. Skirt is made up of two layers of fabric gathered onto the bodice. Underneath layer is 25 cm deep - 12 cm plain fabric from waist with 13 cm edge of broderie type lace with scalloped edges. Top layer of 13cm of broderie type lace with scalloped edges. Unlined. Machine stitched. Skirt pieces are single pieces of lace fabric with seam at centre back.costume, children's, infant boy's dress

Photo mounted on backing card with clear protective film over image and card. Black and white image is of a man and woman photographed from the chest up, standing together. They are dressed formally, the man in a pale coloured suit with waistcoat and the woman in a pale coloured shirt with button detail. Both are wearing ties and she is wearing a dark coloured brimmed hat. The number P386E is printed in white in the lower left hand corner of the image. There is a white border varying between .2mm to .5mm around the photograph. The words Zena Dare & Brother are printed in sepia along the lower left hand edge of the backing card. The words Christmas Greetings have been written in silver on the right hand lower edge of the backing card. On reverse card is addressed to Miss Gladys Esmond McKenzie St Golden Square with a one penny stamp affixed post marked Melbourne.Rotary Photographic Plate Sunk Gem Series Rotary Photo EC. P 386Epostcard

Cap or arm Badge for the Electric Supply Co. of Victoria (ESCo) "Conductor" with conductor staff number "17" Made from a manufactured and steel plate, nickel plated to indicate the staff number position held by the wearer as part of their uniform. Letters and number stamped, with horizontal lines. At each side of the badge are vertical holes through which light leather straps have been fixed with button holes to enable securing the badge on an arm. Leather straps black on one side and tan on the other. On the rear, silver soldered on are two loops at each end of the badge to enable badge to be sewn or fitted with clips onto the cap or the uniform. Badge appears in some photos of ESCo staff in the 1900's. On the back of the back of the badge in letters is the name of the manufacturer - "Stokes & Sons". Stored within tissue paper, within a heavy cardboard, Kodak Photo paper box.tramways, trams, cap badge, hat badge, uniforms, badges, esco

Pressed metal uniform badge for the Melbourne Tramways Board, Employees, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "TRAMWAY EMPLOYEE" and number "10" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with a brass rivet. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons, see all Reg Items 394 and 579.trams, tramways, badges, employees, tb, mmtb, passes

This photograph was captured at an undisclosed location and at an unidentified time but likely dates to approximately 1870. The photographer's details are not recorded and the identities of the men in the image are also not known. This image depicts a group of 10 men in typical miners fashion. Four of them are sat on a large log with one holding a small dog. Six miners stand behind those sitting. All these men are wearing a white button-up shirt and tan coloured work trousers. They wear heavy boots and seven have included a dark vest over their shirt. The man holding the dog has a pipe in his mouth. Two of these men are clean shaven with the remainder sporting a moustache and two with a beard. The ages of these men vary from late 20s to middle age. This group of men are located in a mining location with what appears to be an open cut mine in the background of the image. The ground is muddy and has elements which can help identify it as a mining location based on the condition of the landscape. The bottom of the men's trousers are muddy which provides the assurance that these men were working in this location when their photograph was captured. In the background there is one structure, possibly a dwelling, and bush which identifies the location as Australia. Open cut sluicing is a method used to extract gold and other precious metals from beneath the surface of the earth. This technique involved the use of high-powered hoses which broke down the soil enabling miners to come along and search this soil for gold. After the gold rush of the early 1850s, diggers had to enlist the assistance of heavy machinery and techniques like hydraulic sluicing in order to reach gold because the surface alluvial gold had already been discovered and removed. This heavy machinery was not used until after 1853. The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray an open cut sluicing site can reveal important information for society and technology for the date when the photograph was taken. This image is of important historical significance for its ability to convey information about sluicing and the methods used to find gold in the late 1800s and early 1900s. It also shows a location where sluicing was undertook which provides insight into the impact of sluicing on the environment at a time when it was done. Images, like this one, of Australian gold rush history can reveal important information about the social and environmental impact of this period. This image depicts diggers standing in a mining location and therefore, this image has the capacity to reveal or support significant information for researchers studying the fashion and social status of diggers in Australia in approximately 1870. It can also provide information on the landscape of Australia in this period and the impact of mining for gold on both society and the Australian landscape. The Burke Museum is home to a substantial collection of Australian mining photographs which can be used to gain a deeper understanding into life on the gold fields, technology used in mining, the miners themselves and the impact of the gold digging on the environment.Sepia toned rectangular photograph printed on matte photographic paper mounted on board.Reverse: 1997.2518mining, goldfields, beechworth, 1870, australia, australian goldfields, diggers, victoria, sluicing, gold mining, miners, diggers victoria