Small glass bottle, possibly used for cream. Stamped in glass on side of bottle: 'Contents not less than 4 oz'business, retail, bottle

G022.1 Commemorative drinking glass with gold transfer and rim. G022.2 Straight sided commemorative glass with gold transfer and rim. "Leopold Methodist Church 1860. Leopold Uniting Church 1985. 125 years"leopold methodist church

Belonged to the Alison, John & Michael Woods' mothers parents, John & Eliza James. They lived in Napier Street Creswick. It is believed they may have bought it after moving into this house about 1909Belonged to the Grandparents of the Museum owners.Decorative brass kerosene lantern, suspended from ceiling by brass chains with a frosted glass hood and glass crystal skirt. Nilhanging lamp. kerosene lamp. hanging kerosene lamp. hanging brass lamp. brass hanging lamp.

From the collection of Lorna Broad.Glass bottle -with glass marble in neck of bottle. The bottle has been in the sea for some time and has become opaque.E. Rowlands - Ballarat, Melbourne, Katoomba and Sydney. This bottle remains the property of E. Rowlands Pty Ltd.domestic items, food & drink consumption

Glass bottle with glass stopper. Flowery motive on the bottom and circles on the body of the bottle. Part of the Aileen and John Ellison collection.bottle, glass

Glass plate slide, press image of 1916 tennis match Williams vs. Johnston. Materials: Photographic emulsion, Glasstennis

Glass plate slide,colour image of tennis matches on numerous courts with children observing. Materials: Photographic emulsion, Glasstennis

Glass paperweight with image of world map and caption '1990 Davis Cup Final, USA vs Australia' Materials: Glasstennis

Cut glass block commemorating Davis Cup 1990, United States vs Australia in St Petersburg. Materials: Glasstennis

Glass tube one with cork stoppers at each end and glass section inside. Used to demonstrate spiral strain cracking

Cut glass sugar bowl, with a diamond pattern. It has a lid with a large round knob and two glass sugar spoons.sugar bowls, sugar containers, tableware

Before the introduction of electricity, lighthouses had a clockwork mechanism that caused the lens to rotate with a light source inside that was either powered by Kerosene or Colza oil. The mechanism consisted of a large weight attached by a cable through the centre of the lighthouse to the top where the cable wrapped around a barrel, drum or wheels that controlled the speed of the lights rotation by a clockwork mechanism. The keeper would crank the clockwork mechanism, which would lift the weight ready for the next cycle similar to an old grandfather clock mechanism. Once the weight lifted to its apex at the bottom of the first landing, the keeper would let it fall, which would pull on the cable, which would, in turn, operate a series of gears activating the rotation of the Fresnel optical lens, which would then rotate to create the lighthouse’s unique light speed of rotation characteristic. Creating a specific characteristic required a way to regulate the speed of the rotation, and was important as sailors could identify a particular light by its speed and time between flashes. The weight had to fall at a certain rate to create the proper rotation speed of the lens and a regulator within the mechanism accomplished this. History: From 1851, Chance Brothers became a major lighthouse engineering company, producing optical components, machinery, and other equipment for lighthouses around the world. James Timmins Chance pioneered placing lighthouse lamps inside a cage surrounded by Fresnel lenses to increase the available light output these cages, are known as optics and they revolutionised lighthouse design. Another important innovation from Chance Brothers was the introduction of rotating optics, allowing adjacent lighthouses to be distinguished from each other by the number of times per revolution the light flashes. The noted English physicist and engineer, John Hopkins invented this system while employed at Chance Brothers. Chance Brothers and Company was a glass works and originally based in Spon Lane, Smethwick, West Midlands England. The company became a leading glass manufacturer and a pioneer of British glass making technology. The Chance family originated in Bromsgrove as farmers and craftsmen before setting up a business in Smethwick near Birmingham in 1824. They took advantage of the skilled workers, canals and many other industrial advances taking place in the West Midlands at the time. Robert Lucas Chance (1782–1865), known as 'Lucas', bought the British Crown Glass Company's works in Spon Lane in 1824. The company specialised in making crown window glass, the company ran into difficulty and its survival was guaranteed in 1832 by investment from Chance's brother, William (1788 – 1856). William owned an iron factoring business in Great Charles Street, Birmingham. After a previous partnership that Lucas had dissolved in 1836, Lucas and William Chance became partners in the business which was renamed, Chance Brothers and Company. Chance Brothers invented many innovative processes and became known as the greatest glass manufacturer in Britain. In 1848 under the supervision of Georges Bontemps, a French glass maker from Choosy-le-Roi, a new plant was set up to manufacture crown and flint glass for lighthouse optics, telescopes and cameras. Bontemps agreed to share his processes that up to then had been secret with the Chance Brothers and stayed in England to collaborate with them for six years. In 1900 a baronetcy was created for James Timmins Chance (1814–1902), a grandson of William Chance, who had started the family business in 1771 with his brother Robert. Roberts grandson, James became head of Chance Brothers until his retirement in 1889 when the company became a public company and its name changed to Chance Brothers & Co. Ltd. Additional information: Lighthouses are equipped with unique light characteristic or flashing pattern that sailors can use to identify specific lighthouses during the night. Lighthouses can achieve distinctive light characteristics in a few different ways. A lighthouse can flash, which is when brief periods of light interrupt longer moments of darkness. The light can occult, which is when brief periods of darkness interrupt longer moments of light. The light can be fixed, which is when the light never goes dark. A lighthouse can use a combination of flashing, oscillating, or being fixed in a variety of combinations and intervals to create individual light characteristics. It is a common misconception that a lighthouse's light source changes the intensity to create a light characteristic. The light source remains constant and the rotating Fresnel lens creates the various changes in appearance. Some Fresnel lenses have "bulls-eye" panels create beams of light that, when rotated between the light and the observer, make the light appear to flash. Conversely, some lenses have metal panels that, when rotated between the light and the observer, make the light appear to go dark. This Dioptric clockwork apparatus used to turn a lighthouse optical lens is very significant as it is integral to a lighthouses operation, we can also look at the social aspect of lighthouses as being traditionally rich with symbolism and conceptual meanings. Lighthouses illustrate social concepts such as danger, risk, adversity, challenge and vigilance but they also offers guidance, salvation and safety. The glowing lamp reminds sailors that security and home are well within reach, they also symbolize the way forward and help in navigating our way through rough waters not just on the oceans of the world but in our personal lives be it financial, personal, business or spiritual in nature. Nothing else speaks of safety and security in the face of adversity and challenge quite the way a lighthouse does. Revolving dioptric clockwork apparatus used to turn a Fresnel optical lighthouse lens. A cylindrical cast metal pillar and cabinet painted green with 3 glass doors enclosing the top section. Inside the pillar/cabinet is a large clockwork mechanism used to turn and regulate a lighthouse light by means of weights and a chain attached to same. One door has the name "Adams Mare" in metallic dots similar to "Braille" to the inside edge of door frame.shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, flagstaff hill, maritime-museum, shipwreck-coast, warrnambool, flagstaff-hill-maritime-village, revolving dioptric mechanism, dioptric mechanism for lighthouse, lighthouse clockwork timing mechanism, acetylene lighthouse light mechanism, 19th century lighthouse mechanism, kerosene light, fresnel lenses, colza oil, chance brothers

This bottle came from the Warrnambool aerated waters factory of Charles and Frederick Flett, with the business known as Warrnambool Cordials Pty Ltd. This business had been established by Joseph Lescai in the 1920s. He had a fruit shop near the corner of Lava and Fairy Streets and then moved further north in Fairy Street. His cordial business flourished and was bought by a company of local businessmen before being sold to Thomas Hill in the 1930s. In the early 1940s Warrnambool Cordials Pty Ltd was purchased by Charles and Frederick Flett. Their father, William was originally a tinsmith in Timor Street and the two sons continued on his plumbing business until the 1950s as well as operating the cordial factory. In the 1960s Frederick sold the cordial business to Thomas McKenzie and it became McKenzie’s Cordials. This bottle is of interest as a memento of the Flett brothers cordial business in Warrnambool in the 1940s, 50s and 60s. Warrnambool Cordials Pty Ltd was a prominent business in Warrnambool for 40 years.This is a clear glass bottle with a rounded base and a circular body tapering to a narrower neck with a moulded glass open top. The stopper or bottle top is missing. The details of the manufacture of the soft drink are impressed into the glass on the sides of the bottle.‘Fletts Warrnambool’ ‘Warrnambool Cordials Pty Ltd Warrnambool’ ‘This bottle is the property of the Warrnambool Cordials Pty. Ltd. Warrnamnbool’ charles and frederick flett, warrnambool, warrnambool cordials pty ltd, cordial manufacturers in warrnambool, history of warrnambool

This bottle came from the aerated waters factory of Warrnambool Cordials Pty Ltd. This business was established by Joseph Lescai who had a fruit shop in Fairy Street, Warrnambool in the 1920s. He began to make soft drinks and eventually this became his core business. A group of local businessmen took over the business and in turn it was bought by a local garage proprietor, Thomas Hill, in the 1930s. By this time it was called Warrnambool Cordials Pty Ltd. In the early 1940s the business was purchased by Charles and Frederick Flett and later sold to Thomas McKenzie in the 1960s. The business operated until the 1980s. It appears that the contents of this bottle were made during the Second World War in the time of either Thomas Hill or the Flett Brothers.This bottle is of interest as it comes from the aerated waters business of Warrnambool Cordials Pty Ltd. This company was in operation for over 50 years. Cordial manufacturing was an important industry in Warrnambool for over 100 years. This is a glass lemonade bottle with a round base and a rounded body tapering to a narrower round neck with a moulded glass top at the opening. There is a stopper made of composite materials. The information on the maker of the lemonade is impressed into the glass on the side of the bottle.‘War Grade’ ‘Lemonade’ ‘Warrnambool Cordials Pty Ltd’ ‘Bottle not complete without stopper’ ‘This bottle is the property of Warrnambool Cordials Pty Ltd Warrnambool’ warrnambool cordials pty ltd, cordial manufacturers in warrnambool

3 Beer Glasses - 1 large beer glass with handle (South Aust) 2. Medium size glass known as a Butcher (South Aust) 3. Small size glass known as a Pony (South Aust)Not known. Unable to find them in catalogue register

Glass flask encased in a black and red wicker binding. The flask has a metal lid that doubles as a nip glass. The glass has shattered and the reminents can be heard inside the wicker container when the flask is moved.

The spectacles case comes from G.H. Morton, an optician at 192 Liebig Street, Warrnambool in the 1930s and 40s. He advertised as being ‘near Bloore’s Corner’. The two pair of spectacles may not have been from Morton’s business but may have been stored in the case separately. These glasses and the case are of some interest, firstly because the case comes from the business of G.H.Morton, a Warrnambool optician for a number of years. They also have a social significance as representing the type of eyewear used early in the 20th century. This is a blue leather spectacles case with a wooden insert to hold the glasses. There are two pair of spectacles – one with rimless glass and a gold nose piece (there is a small chip at the edge of one piece of glass) and one with gold rimmed glass and gold handles. The latter has a small piece of metal attached to the side of the glass. On spectacles case: ‘G.H.Morton, FSMC, FBOA, FIO, by exam, London, Qualified Optician, Warrnambool’g.h.morton, optician, optician, warrnambool

Condiments set including stand made of brass (?) with four ball feet, flat base, wire frame and handle to fit four glass containers. 1st glass container: rectangular glass box (no lid) with moulded geometric pattern. 2nd glass container: square base with round neck, same geometric pattern, broken stopper. 3rd glass container: square with metal hinged lid with knob.E.P.N.S., 1' (Electro-Plated Nickel Silver), embossed on frame and metal lid of 3rd itemdomestic items, food and drink consumption, condiments, glass, rack, e.p.n.s., metalwork

Tilley Owl England Kerosene Pressure Lantern. A camping pressure lamp with dark blue enamel top. Pump action handle pressurizes the fuel tank to approx 2 atmospheres. Owl motif on base (very unclear).TILLEY - ENGLAND (on tank) GLASS - TILLEY - DAVISIL 171 HEAT RESISTING / MADE IN ENGLAND Owl motif on basetilley, kerosene, lamp

Elastrator Kit containing a metal box, elastrator tool and marking rings. Used for the castration and docking of livestock.On Tool - Elastrator Reg. Trade Mark Aus. Pat. No. 122217 Des. App. No. 24946 On Glass Bottle - Part No

4 object set. Object 1 a pink glass dish with leaved, V-shaped rim. Clear glass decorative flange underneath overhanging rim. Object 2 pink glass jug, tapered, with clear handle and decorative flange, clear glass decorative feet. Object 3 pink glass bowl, globular, with clear glass decorative peaked trimming around top. Slightly patterned exterior. Object 4 similar to object 3 but with more obvious pattern on main bowl exterior.ornaments, glass, moulded, ornament

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. Brown, brown glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ nipple-liker bump in the centre. Bottle is straight from base to half height then tapers to a shoulder over the next quarter, than almost straight up to the mouth. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, brown glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker, ginger beer bottle

These bottles came from the Warrnambool aerated waters factory of Ralph Reeves. This factory in Koroit Street, Warrnambool was established in the 1860s as the Union Cordial Factory by John Davis and then bought by John Fletcher in 1885. Fletcher’s business continued until 1930 when it was bought by Ralph Reeves. Coming to Warrnambool about 1900 Ralph Reeves managed a Banyan Street cordial factory which had been established by John Rowley. Ralph Reeves bought a business in 1916 at Hamilton and sold it in 1929 to concentrate on the Warrnambool business. Reeves was joined by his son Reg in Warrnambool and Reg operated the business from 1946 to 1972. The trade name of Reeves was still used after Reg Reeves died and continued on for some years.These bottles are of significance as they come from the Warrnambool aerated waters factory of Ralph Reeves. Reeves and his son Reg operated this business for 40 years. Cordial manufacturing was an important industry in Warrnambool for over 100 years. These are five glass bottles with a rounded body, a round base and a smaller rounded neck. The tops are made of moulded glass and the stoppers are made of cork with a brown top. The name of the maker of the aerated waters is impressed into the glass on the side of the bottles.‘This bottle always remains the property of R.V. Reeves Warrnambool’ reeves bottles, reeves cordials, ralph reeves, warrnambool history

These bottles came from the Warrnambool aerated waters factory of Ralph Reeves. This factory in Koroit Street, Warrnambool was established in the 1860s as the Union Cordial Factory by John Davis and then bought by John Fletcher in 1885. Fletcher’s business continued until 1930 when it was bought by Ralph Reeves. Coming to Warrnambool about 1900 Ralph Reeves managed a Banyan Street cordial factory which had been established by John Rowley. Ralph Reeves bought a business in 1916 at Hamilton and sold it in 1929 to concentrate on the Warrnambool business. Reeves was joined by his son Reg in Warrnambool and Reg operated the business from 1946 to 1972. The trade name of Reeves was still used after Reg Reeves died and continued on for some years.These bottles are of significance as they come from the Warrnambool aerated waters factory of Ralph Reeves. Reeves and his son operated this business for 40 years. Cordial manufacturing was an important industry in Warrnambool for over 100 years. These are five glass bottles with a rounded body, a round base and a smaller rounded neck. The tops are made of moulded glass and the stoppers are made of cork with a brown top. The name of the maker of the aerated waters is impressed into the glass on the side of the bottles.‘This bottle always remains the property of R.V. Reeves Warrnambool’ralph reeves, warrnambool, cordial manufacturers in warrnambool, history of warrnambool

One lot of tablets were to purify the water, the other was to take away the swimming pool taste..1) & .2) Metal tin with black metal lid, contains 2 glass tubes with cork stoppers. .3) Glass tube containing 50 blue tables. .4) Glass tube containing 50 white tables. .2) Lid: Sterilising Outfit for use with water bottles (Keep Dry). Instructions for use on underside of lid. .3) x 50 Thio tablets. .4) x 50 Sterilising tablets.containers - military, medicine - pharmacy, military history - equipment, passchendaele barracks trust

One tablet sterilised the water, the other took away the chlorine type taste.Item belonged to Billy Bird No VX113169 2/14 Batt AIF. Refer 1601. .1) & .2) Metal tin with black metal lid, contains 2 glass tubes with cork stoppers. .3) Glass tube containing 50 blue tables. .4) Glass tube containing 50 white tables. .2) Lid: Sterilising Outfit for use with water bottles (Keep Dry). Instructions for use on underside of lid. .3) x 50 Thio tables. .4) x 50 Sterilising tables.containers - military, medicine - pharmacy, water sterilization

Part of a cruet set consisting of two square, cut glass bottles with square pattern, one with pierced silver top, the other with hinged, silver lid, spoon missing. Also, a small glass bottle with glass stopper.Nonetableware, cruet sets