Scale model M48 A3 Patton 2 Tank;Olive green colour with yellow and white writing, mounted on black plastic board.Printed on mounting board " M48 A3 Patton 2/ 1st Tank Battalion (USMC) Danang (Vietnam) - 1968; above drive track "USMC 202149" a shield with the number 1 above letters TK; on the rear of the tank behind the turret is C-34; on the barrel right hand side "C-34" in yellow print followed by "TULA" in white print/ on the rear view on left side drive track mudguard "C-34" in yellow and on Rear right hand side " a shield with the number 1 above letters TK/ front view the number "54" in yellow print on left hand drive track/ in the centre below the barrel is the shield/ on the right hand drive track mudguard is "C-34" in yellowtank, model tank m48 a3 patton 2, scale model, c-34 tank

Four folds green paper pamphlet for two billiard tables models and accessories made by Australian company Ace, located in Fitzroy, Melbourne.ace, billiard table, australia, diner, earl, fitzroy

The article covers the Bendigo RSL's efforts to have a Memorial Monument erected to Honor Ex Servicemen and Women in Campaigns WW2 onwards. It would be a 3.5 Metre Granite structure. $16,000 had been raised at this point, another $4,000 was needed. It would be placed in front of the Soldiers Memorial Institute Building in Pall Mall Bendigo. Ernie Jackman was the Bendigo RSL Appeals Officer and Chairman of the Memorial Committee. Refer Cat No 8133.2P for his RSL work. Refer Cat No 8245.2Article from a newspaper, all black print, photo at the top showing a boy and a man looking over a model of a monument followed by the article.On the top in red ink, "10.7.1992"brsl, smirsl, article, monument

Car appears to be A Model Ford c 1930Sepia coloured post card of a car stopped on gravel road, dwellings seen through trees and mountain in background approaching Bullumwaal Victoriaroads and streets

This violin was made by Mr Edward Richter who lived in Warrnambool for 78 of his 85 years. he was born 10/03/1853 and was an expert model maker making models of ships. The Warrnambool Museum in 1937 held a model of the Cutty Sark which he had made from timber from the wreck of the Enterprise which was wrecked on Warrnambool beach. Violins were another of of his hobbies.This violin has a connection to Warrnambool through the maker who was a long time resident of the town. It belongs to an era when many people were interested in and turned their hand to making objects such as this.The body of the violin is stained brown in colour with black neck and bridge. The four strings are nylon. The pegs and scroll are timber of a finer grain than the front and back.The tailpiece and end button are black material. The bridge is missing. The stand is rectangular with violin shape cutout, painted in red with a ply backing. Small leather strap on one end. Six large and two small drilled holes around front section.Richter written in large letters on back of standwarrnambool, edward richter, handmade violin, richter warrnambool

Motorcycle Patrol riding BMWs in exhibition format at Ballarat Showgrounds. Circa 1964BMW R69s or R60 models at Ballarat Showgrounds. L to R Roy Weir, Ray Johnston, Dennis Scandolera, Ralph Herbertpolice vehicles; wireless patrol; motor transport branch; motor transport section; motor cycle patrol; police motorcycles; bmw motorcycles; ballarat showgrounds

1945 Slide Rule US Army Air Force from Prof. Allan Bromley.Works by adding Angular moments together to find centre of gravity (COG) of a plane (adds bombs, ammunition and crew on board).Brown Leather Case with 'Slide Rule' inner.Load Adjuster, Property of US Government. 102630 on case. 81629. Airplane serial No. 44-4-1195, Model B-24Jbomb load adjuster, a16

HardcoverBookplate inside front cover from Girls Grammar School, 'Awarded to Edith Anderson for Progress in Model Drawing, Brisbane 1895"walsh st library

Made of metal and wood. Set in a cabinet with a drop down bench that can be rested on the open door to extend bench space. Metal treadle and what appears to be an electric treadle and and electric light. Accompanied by original sales docket and Instruction booklet“Jones” Cabinet model Sewing machine Made in England Medium CS (Cylinder shuttle). Engraved pattern around edge of metalmachine sewing

Twenty four page knitting pattern book featuring black and white printed graphics and text. The black and white cover shows a woman wearing a knitted top while holding a fishing net.front: [printed] LINCOLN MILLS / Knitting / BOOK / No. 555 / PRICE / 6D. / MODEL NO. L854 / For knitting instructions see Page 3knitting, pattern, fashion, knitwear, women

Burnley College training of students and maintenance of Burnley Campus gardens.Petrol driven chainsaw, coloured with pale yellow enamel paint. 'Canadien 210' Model 2-10 No. 21107. Serial Number (obscured), Power Machinery Ltd, Vancouver, British Colombia, Canadahorticulture, arboriculture, sawing timber, tree maintenance, wood saw, burnley college of horticulture

This mixed set of clubs and bag was collected as an early example of golf equipment before the current trend of matched clubs and bag. Ern Woods was the professional at Kingston Heath and played 1930s to 1940s.One of a mixed set of golf clubs held at HGC.Hickory shaft and metal head, leather grip.Inscription on head: "H. Logams. The GENII model (reg.) Mashie. Ern Wood Kingston Heath. Made in Scotland. Hand forged."golf clubs, irons (golf), mashie, ern wood

Ship model of coastal trader SS Casino in glass fronted case with stained wood frame. Ship has both steam and sail. Background of lighthouse on cliff, sea and sky. Ship painted green, 3 flags flying. Details (incorrect) of ship painted in white across top frame of case. The S.S. Casino was a passenger and freight steamer built in Dundee, Scotland, in 1882 for the Newcastle and Hunter River Steam Navigation Company of N.S.W. She weighed 425 tons gross with a length of 160.4 feet, beam of 24.1 feet and depth of 10.2 feet. She had saloon accommodation for 35 people, forecabin for 25 more people, and she carried 300 tons of cargo. While on her delivery journey on May 30th 1882 the S.S. Casino called in at the Port of Warrnambool for coal ., narrowly escaping going ashore in gale force winds due to the quick action of the pilot. At that time, still at anchor, she impressed the directors of the Belfast and Koroit Steam Navigation Company so much that they bought her immediately; she was ideal for trade in along the West Coast of Victoria. (Belfast is the original name for Port Fairy, South West Victoria. The Belfast and Koroit Steam Navigation Company was first managed by Messers. Saltau and Osburne and after the passing of Mr. Osburne, by produce merchants Messers H. Sautau and Sons, whose had a hay and corn store and shipping agency was on the corner of Liebig and Koroit Streets in Warrnambool. ) The S.S. Casino became “the most famous steamer to operate in Victorian waters along the West Coast” by author Jack Loney. Captain Boyd was her first Master, followed by Captain Chapman, who stayed with her 1890 until 1924. Captain W. Robertson followed for a short term, then Captain Middleton then took command 1925 - 1932. The S.S. Casino had several mishaps during her life. One was on 3rd January 1898 when she collided with the S.S. Flinders in Apollo Bay with minor damage. Another was on 24th October 1924 when she grounded on a reef at Point Hawdon near Grey River and most of her cargo (of Christmas goods) had to be dumped into the sea. Then in February 1929 she was ‘holed’ when she struck a submerged object as she entered Lady Bay, Warrnambool. On the morning of 10th July 1932, after attempting to berth at Apollo Bay jetty in heavy seas, Captain Middleton decided to take her out into the bay and wait until the seas abated. It was not realised that the anchor used to steady her as she manoeuvred to her berth had pierced her hull. She put about and headed for the beach but sank. Captain Middleton and nine others lost their lives; nine people were rescued including the two female passengers . Captain Middleton had been in charge of the S.S. Casino for seven years. He was the first ship’s Master to lose his life through shipwreck in the West Coast trade. In the years following the turn of the century the S.S. Casino remained the only regular trader with normal passenger accommodation along the West Coast. From 1882 she had made at least 2,500 voyages on the one run. Flagstaff Hill’s collection has a photograph of a portrait of Captain Chapman, , a ship model of the S.S. Casino that shows both forms of power under which she sailed, steam and sail. The ship is painted green and flies three flags. The inscription across the case of the ship model, incorrectly dated, tells the sad story of the wreck of the ship and the loss of lives on July 10th 1932 at Apollo Bay. A print in the Collection show S.S. Casino underway in heavy sea off Point Lonsdale, another two photographs show her at the Port of Warrnambool, leaving from the Breakwater in Lady Bay and another identifies the S.S. Casino as a ship from the Belfast and Koroit Steam Navigation Company. (Belfast is the original name for the township of Port Fairy). This ship model is significant because of its association with the coastal trader S.S. Casino 1882-1932 and its significance to trade along Victoria's West Coast in the late 19th and early 20th century. The wreck of the S.S. Casino is considered an important part of Victorian and Australian cultural heritage and as such has been declared and protected as an Historic Shipwreck under State and Commonwealth Law in the Commonwealth Historic Shipwrecks Act (1976). Ship model SS Casino in glass fronted case with stained wood frame. Ship has both steam and sail. Background of lighthouse on cliff, sea and sky. Ship painted green, 3 flags flying. Details of ship painted in white across top frame of case. NOTE: Correct details for shipwreck is 10 July 1932, at Apollo BayPainted in white on wood across top of case "SS CASINO WRECKED AT APOLL BAY JUNE 10 10 LIVES LOST".flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, newcastle and hunter river steam navigation company, belfast and koroit steam navigation company, h. sautau and sons, s.s. casino, west coast trader s.s. casino, victorian coastal trader, captain boyd, captain w. robertson, captain chapman, captain middleton, apollo bay shipwreck, s.s. casino at lady bay warrnambool, ship model s.s. casino, saltau and osburne

The 186 motor that was used in this vehicle was carried over from the previous model. The transmission was a Tri-matic, used for the first time in an Australian produced vehicle. In the premier, this transmission was the standard, also upgraded in this model were new safety features.The HG was also sold in South Africa as the Chevrolet Kommando4 Door Premier sedan. Four headlights, brown colour with beige vinyl roofTiger and rock emblem grille center, premier badges on bonnet, rear roof pillar and on boot lid. A 186 badge on both front mudguards.vehicle, holden, premier sedan, car

Model of Melbourne Restaurant tram No. 939 in a presentation cardboard box, made by Cooee Concepts Pty Ltd in China. Tram secured into the card box by two screws just behind the life guard. Made from plastic with trolley poles from metal (trolley poles can be moved) black roof, red sides, black No. 15 trucks, with the Skyline space marked "RESTAURANT" The box has the side on view of the tram in the background. trams, tramways, models, restaurant tram, cooee models, cuthberts 939

An Horace Partridge Co., Wimbledon model tennis racquet, with string whipping and hide reinforcements around shoulders, and deep-grooved octagonal handle. Decal of model name features across throat on obverse; decal of manufacturer, with partridge and rising sun trademark, across throat on reverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Leather, Gut, String, Clothtennis

A Caprico Wimbledon Cup Tournament Model tennis racquet, with open throat, ribbon whipping around shoulders and shaft, and leather handle grip with patterned perforations. Model name features across base of head and collar of shaft. Caprico logo features along shaft. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Ribbon, Painttennis

A Wilson 'Jack Kramer Autograph' model tennis racquet, with whipping on shoulders & shaft, and handle wrapped in perforated leather. Plastic butt cap with manufacturer's 'W' logo. Model name on throat and manufacturer name on base of head. Manufacturer 'W' logo on lower shaft. Materials: Wood, Vinyl, Leather, Ink, Plastic, Paint, Adhesive tape, Stringtennis

A blue Wilson 'American Ace Midsize' model tennis racquet, with open throat and manufacturer's 'W' logo sprayed onto net. Manufacturer's name on throat. Model name along left side of shaft and on crown. Handle cover missing, yellow foam core exposed, and no butt cap or cover. Materials: Metal, Ink, Vinyl, Plastic, Inktennis

A 'Birmal' model tennis racquet manufactured by Birmingham Aluminium Casting (1903) Co. Ltd. Has open throat and handle wrapped with string whipping. Metal butt cap. Metal strings. Manufacturer name embossed on one edge of shaft. Model name and words: 'ALL METAL' embossed on other edge of shaft. Materials: Metal, String, Woodtennis

A 'Birmal' model tennis racquet manufactured by Birmingham Aluminium Casting (1903) Co. Ltd. Has open throat and handle wrapped with string whipping. Metal butt cap. Metal strings. Manufacturer name embossed on one edge of shaft. Model name and words: 'ALL METAL' embossed on other edge of shaft. Materials: Metal, String, Woodtennis

A Spalding 'Oval' model tennis racquet, featuring laminate convex throat & fine-grooved octagonal wooden handle. Leather end wrap and butt cloth. Model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Logo also printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, String, Leathertennis

A Spalding 'Lakeside' model tennis racquet, featuring laminate convex throat & fine-grooved octagonal wooden handle. Leather end wrap and butt cloth. Model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Logo also printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, String, Leathertennis

A Spalding 'Lakeside no.5' model tennis racquet, featuring laminate convex laminate throat & fine-grooved octagonal wooden handle. Has string whipping around shoulders and a leather end wrap. Model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Materials: Wood, Metal, Lacquer, Glue, Vinyl, Ink, String, Leathertennis

A Regent, Flight II tennis racquet. Regent logo features across the base of the head and plastic butt cap. Model name featuresalong the shaft. 'R' trademark features at base of shaft. Model details feature on the right side of the shaft. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Paint, Ribbon, Ink, Plastic, Adhesive tapetennis

The Ballarat School of Mines had a functioning model mine.Two photographic images of the Ballarat School of Mines Cyanide House and the Maddern Roasting Furnace from the 1908 SMB Calendar.ballarat school of mines, maddern furnace, cyanide house, model mine