Showing 9534 items
matching equipment
-
Vision Australia
Photograph (item) - Image, Royal National Institute for the Blind, Liquid measure
Glass bottle with attached phallic shaped measuring device. Attached label to the bottle states that this was used by a physiotherapist and provides a reference for the bottle: RNIB 9448. The Royal National Institute for the Blind did sell materials around the world, and this item could have been ordered from them. royal victorian institute for the blind, equipment -
University of Melbourne, Burnley Campus Archives
Album - 35mm Colour slides, Machinery, 1977-1982
Collection of 18 slides. 1 Aug 77, 17 June 82 of machinery.machinery, equipment -
Whitehorse Historical Society Inc.
Education kit - Cuisenaire Blocks, c1960s
Used in schools to teach maths during 1960-70s. Used by Julie Jones at 10 Francis Street, Blackburn.Set of Cuisenaire Rods, multicoloured. Used as an educational tool to teach children maths. Wood was stained in different colours to donate a numeric value.school, equipment -
Phillip Island and District Historical Society Inc.
Photograph, Power station, Cowes 1930s, 1995
The Cowes Power station was in Cowes west, corner of Chapel Street and Osborne Avenue. James Norman Day was in charge c. 1935.HistoricalPhotocopy of letter from Mr & Mrs Ronald Day, Mermaid Beach, Queensland, sent to the Electrical Engineer, Cowes Council, 1995. and reply to sender. Also copy of photo of equipment in power station.Mr and Mrs Ronald Ernest Daypower station, electricity, james norman day -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Booklet, Gas Training 1951, 1951
A soft covered booklet describing types of war gases, the use and care of the light respirator and gas cape, detectors and other gas equipment, and the effects of weather on gas and its effect on food and water.WO Code No 8511. This publication supersedes Gas Training, 1942 (Code No. 7180)war gas training -
Federation University Historical Collection
Photograph - Photograph - Black and White, X-Ray demonstration at the Ballarat School of Mines, 1896, 1896
X-Rays were first discovered on 8 November 1895. By 18 July 1896 staff members of the Ballarat School of Mines (SMB), were experimenting with the exciting new discovery. The history of x-rays began on 8 November 1895 at the University of Wurzburg in Bavaria. The discovery was officially announced on 25 December 1895. The first radiographs in Ballarat were taken at the School of Mines in July 1896 according to the Ballarat School of Mines (SMB) Annual Report. Frederick J. Martell, the Registrar of SMB arranged for the importation of tubes, while John M. Sutherland, an electrician, conducted most of the experiments giving 6 inch, 12 inch and 16 inch sparks respectively. In a short time brilliantly successful results were obtained, with some SMB Roentgen negatives taken at this time still in existence today. Samuel Ernest Figgis, H. R. W. Murphy, D. McDougall, and Frederick J. Martell carried out experiments at the SMB on Saturday evening 18 July 1896, producing 'perfect' negatives of a hand and wrist. A Roentgen Tube and an induction coil giving a two inch spark, the coil being sparked by the SMB's dynamo, were used to obtain these results. The Courier reported that 'the exposure of five minutes was ample' but concluded that 'the length of the exposure will be shortened as experiments proceed.' The Ballarat Courier reported on 20 July 1896 that: "Thanks to the energy of the staff of The School of Mines, Ballarat, and particularly to Messers F.J. Martell and D. McDougall, the assistance of Rontgen X-rays will soon be available, for the relief of suffering humanity, at this institution." Martell was an ardent amateur photographer, and Duncan McDougall's experience as an electrician has enabled the two gentlemen to carry their experiments on to a perfectly successful issue. At first these gentlemen, together with Professor Purdie and Mr W. Huey Steele, conducted a series of experiments by the aid of a Bonetti glass-plate induction machine which had been constructed by Mr McDougall. The results were very good, the various bones of the hand being distinctly visible. The following people were among those who witnessed the first X-ray experiments to be carried out in Ballarat. Andrew Anderson, President of the School of Mines, a large number of ladies and gentlemen, the medical profession Dr Edward Champion (1867-1929) Dr Gerald Eugene Cussen (1888-1943) Dr William Edward Davies (1868-1928) Dr Charles William Henry hardy (1861-1941) Dr Edward Kenneth Herring(1864-1922) Dr Joseph Lalor (1859-1907) Dr James Thomas Mitchell (1856-1945) Dr Edward Graham Ochiltree (1857-1896) Dr Robert Denham Pinnock (1849-1902) Dr Joseph Francis Usher (c1832-1909) Dr Grace Vale (nk-1933). The staff of SMB Professor Alfred Mica Smith Professor D. J. Dawbarn Mr. F. J. Martell. (http://guerin.ballarat.edu.au/aasp/is/library/collections/art_history/honour-roll/honourroll_X-Ray_pioneers.shtml)Two men, one seated, one standing standing in a room with early electrical equipment. They are conducting pioneer X-rays at the Ballarat School of Mines in 1896. Seated on the left is John Waters Sutherland.A bromide of this images states "Experimenting with X-rays, 1896"ballarat school of mines, x-ray, xray, john sutherland, sutherland, electricity, photography, foto, roentgen tube, medical -
Federation University Historical Collection
Photograph, Ballarat School of Mines Physics Laboratory, c1908
The Ballarat School of Mines was the first site of Technical Education in Australia. Initially it opened in 1870 and educated miners. Black and white photograph of the interior of the Ballarat School of Mines Physics Laboratory. Numerous pieces of equipment sit on benches. The image in the 1908 Ballarat School of Mines Calendar was title 'Physics Demonstration Room'.ballarat school of mines, laboratory, physics, scientific instruments, science, classroom, education -
Port Melbourne Historical & Preservation Society
Photograph - Relating to Malcom Moore Pty Ltd, 1948 - 1988
Collected by donor's father Norm Robinson during his 40 year employment with Malcolm Moore between 1948 and 1988.Photos of worksites, machinery, manufactured equipment for Malcolm Moore's. Selection taken from photo album now returned to donor. Moore's premises were in Williamstown Road (approximately where Bunnings is now)industry, built environment - industrial, norm robinson, malcolm moore pty ltd -
The Ed Muirhead Physics Museum
Photograph, Cyclotron (JL Rouse)
Black and white photograph of cyclotron equipment displayed on bench. Stored in white envelope entitled “”Cyclotron - Photographs around the vacuum chamber from J.L. Rouse (Feb 1991)” Similiar to 246-249 -
Bendigo Historical Society Inc.
Photograph - AUSTIN COLLECTION: MINE SITE
Black and white photograph (copy of original): image shows early mine site, possibly Hustler's Hill. Sheds in middle foreground, windlass on top of hill, various mine equipment in middle of image. -
B-24 Liberator Memorial Restoration Australia Inc
Emergency Drinking Water, Packed by R.A.F, 1940s
Small (about .5 litre) can, containing drinking water. A spike, to punch a small hole in the can, is affixed to the lid. These cans were standard equipment in B-24 Liberator life raftsWater (Drinking)a20 -
National Vietnam Veterans Museum (NVVM)
Poster - Poster, Information Board, Behind The Wire
Storyboard of Brian Richards, Clerk Equipment Accounts, Phan Rang, March 1969 - March 1970. Service Number A56800. No 2 Swuadron, RAAF. Attached to 35th Tactical Fighter Wing, USAFstoryboard, behind the wire, brian richards, phan rang, 2 squadron raaf, 35 tac fighter wing, us forces -
Tatura Irrigation & Wartime Camps Museum
Photograph, Cattanach Canal, 1957
Taken by the photographer for Victoria State Rivers and Water Supply Commission.Large sepia photograph - Construction equipment middle foreground, two bridges, truck crossing second bridge, trees, flat paddock, scattered trees, man working on nearer concrete bridge support.Below photo: "Cattanach Canal / Rail and Highway Bridges near Murchison"irrigation, victoria state rivers and water supply commission, cattanach canal, bridges -
Tatura Irrigation & Wartime Camps Museum
Photograph, Wacker Rammer - Irrigation, 1957
Taken by photographer for State Rivers and Water Supply Commission.Medium sized black and white photo. Man using equipment(Wacker Rammer), to repair a channel break. Water foreground, Dethridge Wheel and concrete and earthen bank mid distance. Trees on horizon.On back: "A Wacker Rammer being used to repair a channel break."victoria state rivers and water supply commission, wacker rammer -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1938
Black and white photograph timber construction of Surf Lifesaving tower and equipment shed on sand dunes behind brush fence, flags strung from tower flagpole to fence. Lakes Entrance Victoriacommunity services, emergency services, fundraising -
Bendigo Historical Society Inc.
Document - AULSEBROOK COLLECTION: BENDIGO INSTITUTE OF TECHNOLOGY 1969 GRADUATION BOOKLET, 1969
Aulsebrook Collection: Bendigo Institute of Technology 1969 Graduation Booklet (a) -10 pages -Program for graduation, -Lists of staff, scholarships, medals, certificates, diplomas, and details relating to buildings at the institute and equipment. (b) -
Tennis Australia
Letter, 02 Jun 1890
Handwritten letter of 1890 from R. Bliss to a Mr. Burnham at Pawtucket Lawn Tennis Club, inviting purchase of Bliss Co. tennis equipment. Materials: Paper, Ink, Metal, Cardboard, Glasstennis -
University of Melbourne, Burnley Campus Archives
Slide - Colour slides, Marcus Oldham College (c), Farm Surveying Land Management
marcus oldham college, surveying, farming, surveying equipment, land management -
University of Melbourne, Burnley Campus Archives
Newspaper - Newspaper Cutting, The Leader, Horticultural Notes, 1891
Copy of article in "The Leader" (Melbourne) 24 October, 1891 p 14. Description of meeting of the Board of Horticulture on 16 October, 1891. Annual prizes, equipment purchase and other costs and fines for students.the leader, board of horticulture, prizes, fines, students, equipment purchases -
Bendigo Military Museum
Equipment - VICKERS No1 MK III A.A. PREDICTOR, Commonwealth Government Ordnance Factory, c. 1942
This piece of equipment was used to predict the flight path of an aircraft in order for anti-aircraft artillery to fire accurately at an approaching enemy airborne target. A crew of six operated the machine with information ready to be relayed to a gun within 50 seconds. The predictor was manufactured at the Commonwealth Government Ordnance Factory, Maribyrnong.The item is made primarily from metal, is square shaped and bolted to a wooden base. Numerous hand operated wheel dials attached to gauges which input information related to wind speed, bearings and elevation are visible. Each of the four sides has a specific task with three sides being labelled - Elevation Unit, Wind Calculator, Bearing Unit. The item is housed in a glass and wood display case. Attached to the front of the display case: 'VICKERS A.A. PREDICTOR No1 MK III MANUFACTURED BY ORDNANCE FACTORY MARIBYRNONG'pedictor, military equipment, ordnance, anti-aircraft guns -
National Wool Museum
Tool - Grinder, 1960-69
Cooper S.E. Ball Bearing Grinder made and guaranteed by Sunbeam Corporation Limited. Grinders like this example have been made the same since the early 1900s, with this grinder thought to have been produced in the 1960s. It is belt driven, with the other end of the belt being attached to an engine; the same engine that would have powered the overhead shearing equipment in shearing sheds. It was common for shearing teams to bring their own equipment, especially pre-1960 as most shearing sheds were not connected to power, and shearers preferred to work with their own equipment. The engines that powered the shears and grinder were typically fuelled with kerosene or petrol. The large circular disks are attached to the bolt that protrudes from the grinder and fastened tightly with a nut. An example of seeing a similar grinder in action can be found on the following link - https://www.youtube.com/watch?v=O7eimI_Gm9o. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. The grinder is formed from a central arch shaped block of green painted metal. Much of this paint has been lost to age, leaving the grinder in a ‘farm used’ condition with much surface oxidation present. On the front of the arch is a specification plate, reading “Cooper S.E. ball bearing grinder. Made and guaranteed by Sunbeam”. At the foot of the arch, three bolt holes are found for securing the grinder to the base of a solid wooden surface. Two of the bolt holes are found on the front of the grinder, with another found on the rear. From the central arch, a bolt protrudes to the right of the grinder. This large bolt is for securing a grinding plate to the grinder. Above the central arch is a pendulum which holds the comb / cutter that is being sharpened. From the pendulum, a large arm extends down (not pictured) to meet and strike the plate spinning at a rapid speed. On the left-hand side of the central arch of the grinder, a wheel is found which a belt is attached to for power. This belt is then attached to a separate engine, spinning the wheel and hence powering the grinder. The wheel is partially covered with a section of protective bent tube, designed to provide protection from the rapidly spinning wheel. Below this wheel is the belt shifter. It is designed to move the protective bent tube from one side of the grinder to the other, to accommodate the grinder in the setup of different shearing sheds. The two separate grinding plates are identical. They have a slight slope for sharpening the comb and cutters in the correct method, with a slight bias towards the base, or “tooth”, of the equipment. The disks have a large central bolt for attaching to the grinder. They have tags on the horizontal axis of the grinding plates, for securing the plates in transportation, and to help with initial alignment when setting up the grinder. The reverse of these grinding plates has the same green painted metal finish found on the grinder. This paint is also in a ‘farm used’ condition, with surface oxidation present. The grinder would be provided from the factory with a comb holder, shifter for securing the grinding plates, emery cloth and emery glue. The emery cloth is what does the actual grinding and is applied to the grinding disks, replacing once well worn. These items can be seen in the final images in the multimedia section, showcasing advertising for this grinder. Plate. Inscribed. “Cooper / S.E. BALL BEARING GRINDER / MADE AND GUARANTEED BY / Sunbeam / CORPORATION LIMITED / SYDNEY MELBOURNE / ADELAIDE BRISBANE ”sheep shearing, shearing equipment, sunbeam, grinder -
Buninyong & District Historical Society
Photograph - Original Photograph, Mr. W. Grigg with horses and dray, Bungaree 1990, 1990
farm equipmentColour photograph, Mr. W. Grigg with horses and dray, Bungaree 1990.buninyong, w. grigg, horses, dray, bungaree -
Stawell Historical Society Inc
Realia Brass Plaque, Stawell Hospital Commemoration Plaque. Maud & Sharpley, Stawell District Hospital
Donation of EquipmentCast Brass Commemoration PlaquePresented in memory of Florence Maud and Walter Gordon Sharpley by Florence Green and Ian Sharpleyhospital -
Queenscliffe Maritime Museum
Photograph - Sepia photograph of Henry Freeman, lifeboat man, Henry Freeman portrait, unknown
Lifeboat equipmentLifeboat equipment userSepia photo of Henry Freeman - lifeboat disaster survivorReverse - " Gift from Henry Reid 6/11/86 - Artboard AB 57 - Frank Meadow Sutcliffe 1853 - 1941 - Henry Freeman - A portrait of Henry Freeman. Lifeboatman for over forty years & sole survivor of the Whitby lifeboat disaster of 1861 in which twelve men were drowned close by the West pier. Henry Freeman was the only one wearing a newly designed Ministry Life Jacket. - Reproduction by courtesy of the Sutcliffe Gallery, Whitby. - Hand finished photographs printed from Sutcliffe's original negative available from The Sutcliffe Gallery, 1 Flowergate, Whitby, Yorks White. Write for details. (c) Camden Graphics Ltd 1977 43 Camden Passage London N1 01-226 2061 ".historical references -
Clunes Museum
Domestic object - LAUNDRY MANGLE
Laundry equipmentLarge green wrought iron mangle with wooden rollers and metal pressure bar. Wheel to turn metal cogs to work rollers. Wooden shelf at base. Metal castors to maneuver into position.Trademark Wertheimlaundry, washing -
Melbourne Tram Museum
Document, Melbourne & Metropolitan Tramways Board (MMTB), "Code of Procedure for use in Emergencies involving trams", 1960s
Produced by MMTB to provide procedures for the recovery of tramcars and buses by the Emergency Vehicle Crew known as R10 - their radio call sign. Includes many photographs showing equipment in use. Prepared based on photographs during the 1960s. Provides details on the use of equipment for derailments, damaged equipment including the use of transporter bogies on trams.Shows the preparation of training materials for the Emergency Recovery crews.Folder by "Rexel nyrex" - green covered plastic containing 24 clear plastic sleeves. Each sleeve has two sheets back to back with some black and white photographs, typed foolscap. The folder has a typed tab or document titled "Emergency Procedures". Two photocopied sheets - fault class or number for W and Z class trams and how to install an emergency trolley pole on a pantograph fitted A class tram. Note: Pages are out of order.mmtb, tramways, trams, emergencies, r10, derailments -
Kiewa Valley Historical Society
Relay Protection Instrument, Circa 1950's
This protection relay apparatus (a large electrical fuse), which permits the easy monitoring and disconnection of faulty electrical apparatus connected to the large SEC Victoria Hydro Scheme's electrical power producing generators. These generators are powered by the hydro force of "stored" water at a higher altitude. The establishment of both the NSW and Victorian Hydro Schemes was achieved from the early 1900's to the 1960's. At this point in time the need for additional power sources to quench both an industrial and domestic demand for electricity was purely an economic and not and environmental (carbon reduction) factor. This hydro scheme was instigated by "the Government of the day" as a bold move and was the major force of the World War II refugee and "technical" workforce inclusion of skilled and unskilled migration into the Australian environment. Although this mass "invasion" of workers with families was thought of in some circles as intrusive, the expansion of population post war years and its integration into the Australian rural sector, produced the multi- lingual multi-cultural diversity of later years.This protection relay is very significant to the Kiewa Valley as its use was introduced during the Kiewa Hydro Scheme. Although only a small apparatus it was part of the explosion of human resources into the valley. This influx of population transformed the region from that of a basically quiet rural region to one which evolved into both an industrial and a larger residential community. This evolution in the valley created a change, not only in the "physical" landscape but also the socio-economic expansion which permitted other "tourist" based industries into the valley.This protection relay unit has a black painted metal shell with four copper enclosed "prongs" fastened to the rear of the housing(from a bake-lite plate) . Between these "prongs" are four "empty" points allowing additional "screw on" bases. The front glass enclosed meter and recorder allows for the identification and automatic disconnection of any faulty equipment connected to the main power generator. This equipment acts similarly to a modern day circuit breaker found on the electrical circuit boards of residential homes.On the top section of the front panel "ASEA" to the left "Made in Sweden" and to the right "Frabrique en Suede" below this "RIS" below this a graph and next to it two columns of numbers and a pointer for each setkiewa hydro electricity scheme, victorian state electricity commission, relays, generators -
Bendigo Historical Society Inc.
Document - NORMAN OLIVER COLLECTION: MAYOR'S NOTES NOV 14 1964
The Norman Oliver collection. Norman Oliver was three times Mayor of Bendigo - 1950-51, 1964-65, 1970-71. Two typed pages, with Nov 14 written in red ink across the top, but in sequence labelled 1964. Topics include: visit of U.S Consul, availability of labour for proposed meat industry developments, possibilities surrounding the future demand for office equipment, result of City Council estimates meeting, the need for replacement of mechanised equipment, and Lake Weeroona improvements.bendigo, council, report, councillor norman oliver. mayor of bendigo. -
Bendigo Historical Society Inc.
Document - STATE RIVERS AND WATER SUPPLY COMMISSION VICTORIA : CENTRAL PLANT WORKSHOPS
State Rivers and Water Supply Commission of Victoria. Brochure titled 'Central Plant Workshops'. Double-sided, three pages on each. Information about the workshops (CPW for short) and the setting up of the Bendigo site from 1946. There is a map of the layout of the site, and information given under the following headings - Central Plant Workshops, Work of the CPW, Meter Wheels, Pump Station Equipment, Steel Fabrication, Precast Concrete, and the Area and its Equipment. The brochure is dated June, 1968.state infrastructure, water supply, coliban system, state rivers and water supply commission of victoria. coliban system. central plant workshops. -
Bendigo Historical Society Inc.
Document - IAN DYETT COLLECTION: AUCTION CATALOGUE - UPPER BETHANGA MINE
Auction catalogue for a sale on 1st June, 1944 at the Mine Upper Bethanga, Bethanga, Vic. (16 miles from Albury) of Mining Plant, Buildings and Equipment. Notice in the front of the catalogue mentioning buyers had to obtain permission from the Director of Machine Tools and Gauges to make purchases of Machine Tools and Allied Equipment at an Auction Sale. J. H. Curnow & Son were the auctioneers. Contains a description of some of the machinery and buildings. The Cambridge Press were the printers of the catalogue.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - upper bethanga mine, j h curnow & son, j l jamieson, w g wedd, the cambridge press