Sunbeam Motor Cycle Catalogues and Envelope - S A Bush: a. Envelope addressed to S A Bush, Bairnsdale, posted in Streatham, England ; b. Catalogue for 'The Sunbeam Motor Cycle', Season 1916 with addendum dated June 1st, 1917. 24 pages. Handwritten ([pencil) on cover: R F Bush - St? ?? Rd, Streatham, London; c. Preliminary List - Sunbeam Motor Cycles, December 1919 - 8 pages with notations, handwritten on p. 5 27/4/20.person, individual, bush collection - personal, bush collection, collection, transport, motor cycles, catalogue

Object. Small square cardboard box with ribbon closure and press-stud catch. Label on top of the box reads "Poudre (Powder) June Roses".Morny Pour Le Teint Manufactured in England by Morny, 201 Regent Street, London.This label is the Registered trade mark of Morny Pty Ltd.personal effects, containers, powder

Newspaper Cuttings (re Aviation) 1917 and 1919 in black-covered exercise book : 1917 - relating to WW1 aviation and war in the air (including bombing of UK/London) and 1919 - relating to Australian aviation e.g. Harry Hawker flight (re Trans-Atlantic flights) and flight (planned) between England and Australia 1919.cottage, miners

This bracelet is possibly associated with FJ Browne's service with the Royal Army Medical Corps in World War I. Identification bracelets were worn during World War I and II in England.Francis James Browne died in Sydney 1963. He had a long career in obstetrics and gynaecology. Summary of appointments include: General Practice in Wales, Maternity Department of the Edinburgh Royal Infirmary, 1st director of obstetric unit, University College Hospital London. Retired and continued postgraduate teaching in London and NSW. Married to Grace Cuthbert, who was director of Maternal and Baby Welfare in NSW. Collection of objects transferred from the Archives to the Museum collection found amongst Professor FJ Browne's papers.Silver identification bracelet. Bracelet is engraved "FJ BROWNE/ HEATH LODGE/ WATFORD HEATH." Reverse of bracelet is engraved "SILVER". browne fj

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. (Source: Wood Library Museum)Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. There is also a dome-shaped metal inhaler with a "whistle tip" type connection to the mask. The mask is made of tan leather. There is also a metal ether measure for pouring the ether.Printed in gold leaf inside lid of box: MAYER & MELTZER [?] PORTLAND ST. / MAKERS •Engraved on side of inhaler: Mayer & Meltzer / London •Stamped on connector of inhaler: MAYER & MELTZER RN NO 212327 •Engraved on rear of inhaler: Clover's Inhaler •Printed in white on blue sticker: O.2.5A •Measurements have been stamped on the bottom of the inhaler. •Printed in black ink on mask: MADE IN ENGLAND •Stamped on metal connector inside mask: 6 •Printed in black ink on white manufacturer's label on glass bottle: ETHER PURUS '720 / H. Francis & Co., Melbourne.clover, joseph, mollison, crawford henry, george bankin, mccaul, kevin, royal women's hospital, coroner, freemason, surgeon, gynaecologist, obstetrician, mayer & meltzer, francis & co, melbourne, ether purus

Dr. Dai Davies presented this Goblet as a gift to the Faculty as the first appointed Burnell-Jose visiting Professor, Postgraduate Committee in Medicine, S.A. May - June 1976. At the time, Dr Davies was the Consultant Anaesthetist St George's Hospital, London and during this event was elected to Honorary Fellowship of the Faculty of Anaesthestists, Royal Australasian College of Surgeons. The Burnell-Jose Visiting Professorship commenced in Adelaide in 1975 in honor of Mary Burnell, the first woman Dean of the Faculty from 1966 to 1967 and the first woman President of the Australian Society of Anaesthetists in 1955. Very few women had assumed major anesthesia roles in the world during this period. The Goblet's provenance is supported by an original booklet, which certifies its origin from Chichester Cathedral (1075), Sussex, England. In 1975, a limited edition of 600 goblets were commissioned by the Dean and Chapter of Chichester Cathedral, Reverend Walter Hussey, to commemorate the ninth century of the Foundation. This Goblet is number 46 of the edition and the booklet is signed by Walter Hussey. The Goblet is historically associated with Chichester Cathedral and Walter Hussey, who was a great patron of the arts during the 1970's.Solid silver, with pure gold overlaying the modeled stem and interior of the cup. Trefoil shaped goblet cup with tapering profile. The stem is supported by a sheaf of wheat and bird design. The goblet came in its own case with a booklet of authenticity. [central base] NUMBER / 46 / OF A LIMITED EDITION / OF 600 MADE BY ORDER OF / THE DEAN AND CHAPTER / TO COMMEMORATE / THE NINTH CENTENARY OF / THE FOUNDATION OF / CHICHESTER CATHEDRAL / IN 1075 / AURUM / DCM [and hallmarks of the Worshipful Company of Goldsmiths] •[around base] D.M. DAVIES / ADELAIDE 1976dr davies, dai, burnell, mary, chichester cathedral, burnell-jose visiting professor, murphy, desmond-clen, hussey, walter, ninth century of the foundation of chichester cathedral

This goblet was gifted to the Faculty by Professor John Norman (UK) during the Combined Scientific Meeting (CSM) organized by Hong Kong College of Anesthesiologists (HKCA) with ANZCA, held in May 2001, Hong Kong. The goblet is a unique design by the Australian - born artist Stuart Devlin AO, CMG. Devlin is considered to be a significant contemporary gold and silversmith, having become well known as a London Designer in the '70s and '80s. His achievements include the Royal Warrant of Appointment as Goldsmith and Jeweller to the Queen of England granted in 1982.Hand made gold gilded sterling silver goblet. The stem is designed in a rope like twist holding up a simple tempered cup. The hallmarks are punched on the outside of the cup.[hallmarks] SD / lion passant / lion's head / Sprofessor norman, john, combined scientific meeting, csm, devlin, stuart

Dr Bernard Johnson was elected on December the 6th December 1952 as the Faculty's first honorary Fellow. At the time, Johnson was the Dean of the Faculty of Anaesthetists, Royal College of Surgeons, England. He was invited to visit Australia to receive his award and in 1953 Johnson received his award and brought with him a notable gift being the local Dean's medal of office which was presented on behalf of the Royal College of Surgeons. Johnson had previously met with Ivan Jose and H.J. Daly by providing advice for the establishment of an Australasian Faculty. Johnson is a significant figure as a pioneer into intravenous anaesthesia into Great Britain. He then turned his attention to improving dental anaesthesia. Working with fellow colleagues R R Macintosh and W S McConnell, they established the ‘Mayfair Gas Company’, primarily for dental anaesthesia, but also provided anaesthesia for general surgery during honorary hospital sessions. Johnson participated in the development of the Faculty of Anaesthetists within the Royal College of Surgeons. A founding member of the Board of Faculty, he served as Vice-Dean and then was the second Dean (1952-5), a role which provided a seat on the council of the RCS England. A 9 carat gold [375] oval shaped Dean's Medal of the Faculty of Anaesthetists, Royal Australasian College of Surgeons secured onto a red coloured woven tape by two large gold links. Obverse depicts in coloured enamel secured onto base the RACS coat of arms and crest. Engraved around the sunken diameter are the Faculty and College names. The reverse side has the presentation details inscribed onto a plaque secured onto the main piece with three rivets with hallmarks on both the message plaque and the outer rim. The original red leather box is in poor condition. Printed on the inside silk cover are the maker's marks.[obverse] THE FACULTY OF ANAESTHETISTS / ROYAL AUSTRALASIAN COLLEGE OF SURGEONS [reverse] PRESENTED / BY THE DEAN / DR BERNARD JOHNSON / ON BEHALF OF THE BOARD OF / THE FACULTY OF ANAESTHETISTS / OF THE ROYAL COLLEGE OF / SURGEONS OF ENGLAND / AT THE INAUGURAL MEETING / 17th APRIL 1953 [hallmarks on reverse] GAS CO LTD 9 375 R Edinburgh? [black print on inside box cover] By appointment silversmiths to / THE LATE KING / GEORGE VI / THE [goldsmith's logo] / GOLDSMITHS & SILVERSMITHS / COMPANY LTD / CROWN JEWELLERS / incorporating GARRARD & CO / 112 REGENT STREET, LONDON W. I.dean medal, mayfair gas company, rcs england, johnson, bernard

This Minnitt machine was owned by Dr Mary Clementina DeGaris. Dr DeGaris qualified from medicine, MB BS, at the University of Melbourne in 1905. She continued her studies, becoming only the second woman in Victoria to qualify MD, in 1907. With the outbreak of war, DeGaris attempted to enlist as a doctor with the Australian Army but was refused. Undeterred she travelled to England, where she joined the Scottish Women's Hospitals for Foreign Service, a medical group made up entirely of women. After the war, she returned to Australia and set up practice as an obstetrician in Geelong, Victoria. Subsequently, the Geelong Hospital named a wing after her, "DeGaris House", which is now part of Geelong Private Hospital. DeGaris was awarded the St Saba medal, 3rd class, for her work during WWI. Robert James Minnitt introduced the concept of self-administered analgesia, using an apparatus designed and built in conjunction with London scientific instrument-maker, Charles King. The Minnitt apparatus met with considerable success and led to further modifications, including the introduction of the Queen Charlotte gas-air analgesia apparatus in 1936.Brown leather suitcase with brass locks and leather handle. Inside the case is metal equipment, with arms for attaching cylinders. On top of the case, located underneath the handle, is a small brass plate, bearing the name of the owner in black printed script on a piece of card or paper held inside the plate.Printed in black ink on name plate: Dr Mary C. De Garis.minnitt, geelong, scottish women's hospitals, world war i, obstetrician

The Loving Cup was presented to the Royal Australasian College of Surgeons at the inaugural session of the General Scientific Meeting in Melbourne, on 15 May 1977, to mark the 50th anniversary of the foundation of the College. It was presented by Sir Rodney Smith PRCS and Lady Smith, and was a gift from the Royal College of Surgeons of England, the Royal College of Surgeons of Edinburgh, the Royal College of Physicians and Surgeons of Glasgow, and the Royal College of Surgeons in Ireland. The coat-of arms of the Colleges are engraved around the outside. The Cup was made by Roy Flewin, a master craftsman of London. It is sterling silver, hallmarked for the year of the Queen’s Silver Jubilee (1977), and stands 26cm high. It is fitted with two handles and a lid’ and has a gilt interior. The engraving was carried out by Stanley Reece. Whether between friends or lovers, drinking from a Loving Cup is an act of ultimate trust, and is always performed with due ceremony: “A” takes the Cup, filled with wine, and turns to “B”. “A” bows to “B”, and “B” bows/curtsies to “A”. “B” removes the lid of the Cup. “A” drinks from the Cup, and wipes the place he drank from with a cloth tied to one of the handles. “B” replaces the lid, and takes the Cup. If only two people are involved, then they simply reverse rôles. If there are more than two, then the ceremony continues in a similar fashion. The Cup is a token of the friendship and cordiality that exists among the Royal Colleges. In presenting it to E.S.R. (Bill) Hughes, then President of the RACS, Sir Rodney described it as ‘a symbol of our common heritage, and the privileges and responsibilities we share’The Loving Cup was presented to the Royal Australasian College of Surgeons at the inaugural session of the General Scientific Meeting in Melbourne, on 15 May 1977, to mark the 50th anniversary of the foundation of the CollegeSTERLING SILVER 2-HANDLED LOVING CUP WITH LIFT TOP, FINE BUD FILIAL, GILDED INTERIOR AND SCROLLED HANDLES, ON RIBBED PLATFORM BASE, WITH CREST, ETC. (SEE TOORAC AUCTION LIST FOR ALL DETAILS).HALLMARKS AND COATS OF ARMS. UNDER BASE: "ENGRAVED BY STANLEY REECE) PRESENTATION CARD: "LOVING CUP PRESENTED AT THE INAUGURAL CEREMONY GENERAL SCIENTIFIC MEETING, RACS, 15 MAY 1977 BY loving cup, 50th anniversary of the foundation of the college, sir rodney smith, 1977, roy flewin

Abney Level / Clinometer is an accurate surveying tool used to measure degrees, percent of grade and topographic elevation. Used for surveying pipe lines.Instrument which consists of a fixed sighting tube, a movable spirit level connected to a pointing arm which turns and pivots. Adjustment knob/screw on top turns to rotate the compass indicator and bubble level. Arched scale graduated 0 to 90 degrees in both directions. Clinometer is housed in a brown leather case with a long leather strap for carrying around the neck.Watts London / No 70131 / Made in England

62 pages, typewritten, on white paper with a brown paper cover. Bound along one side by 3 brass metal fasteners.non-fictionA detailed account of Pte Price's experience of WWI from his embarkation to his return. Sections include: Description of Journey (Arrival at Albany WA; From Albany to Cape Town; Cape Town to Vincent, Verde Island; The Village Blacksmith; Four Days Holiday in London; Back at Camp; Second Visit to London); Review by King George; Zeppelin Air Raids; Embarking for France; The Idea of a Raid; St Omer; Battle of Messines; Bombardment Prior to Advance on Messines; A Visit to France by King George & Prince of Wales; Five Days March from Senlicques; First Battle of Ypres; Preparation for Second Battle of Ypres; 14 Days Leave from France to England; 14 Days Sick Leavewwi, world war i, f g price

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

Dinner size plate with photograph of St Paul's Cathedral, London. Plate has gold.... Picture in rich taupe brown. "Avon shape" plate.MADE IN ENGLAND Crown Ducal Made in Englandcrown ducal, plate

This camera has a moulded smooth plastic body with broad horizontal stripes, optical direct vision finder. Product Identifier: E130. 01081.Front: KODAK Brownie 127 CAMERA - (in red print) Bottom: Made in England by Kodak Limited London Open: inside: - Use 127 film camera, brownie, kodak

Souvenir mug in white ironstone with black painting of London scenes headed "London Celebrations 1977" on one side and "The Queen's Silver Jubilee" on the other. Card attached with list of dates and occurrences in the Queen's life from 21 April 1925 to 14 November 1973.Stamp of "ADAMS - Real English Ironstone. Made in England. / Established 1657" - on bottom of mug.queen elizabeth 2, silver jubilee souvenir, ironstone mug

Private Donald Hector Murray greeting Private Edward Raymond Hargreaves in London during WW1. Donald enlisted 17/04/1916 in the 37th Infantry Battalion and embarked for Europe 03/06/1916. He died of Tubercular Pleurisy on 21/12/1916 at the Military Hospital, Fargo England, whilst on active service. He is buried in the Durrington Cemetery there. Edward enlisted in the 5th Infantry Battalion on 08/07/1915 and embarked for France 11/10/1915. Upon his return he was granted a Soldier Settler's block west of Lake Bolac in 1921. He married Flora Graham in 1925. murray, 37th infantry battalion, hargreaves, graham, 5th infantry battalion, london, ww1, fargo military hospital, durrington cemetery, lake bolac

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. New England house, unknown location, USAMade in USA / 18 / 04819 / NEW ENG. GOTHIC (Handwritten) / C (Handwritten) / 80 (Handwritten) / C4 (Handwritten)mit bemis professorship, mit, robin boyd, slide

The Boyd family recall that a well-designed nutcracker was always by the bowl of nuts.A nutcracker, with black iron, handle screw upper, middle part where nut is crushed, lower part is standTwo stickers on the base: "Robert Welch, Chipping, Campden England" "As selected for the design centre in London"cookware, gadget, walsh st kitchenware, robin boyd

In April-May 1971, Robin and Patricia Boyd travelled to Honolulu, east coast USA and London. In London he was one of the judges for the Commonwealth-wide entries for the redevelopment of Whitehall and the Palace of Westminster. He was also researching overseas libraries, as background for plans for a new State Library of Victoria.Colour slide in a mount. Sussex University, Falmer, England. (Architect: Sir Basil Spence.)Inscribed Made in Australia / 17 / AUG 71M1slide, robin boyd

In April-May 1971, Robin and Patricia Boyd travelled to Honolulu, east coast USA and London. In London he was one of the judges for the Commonwealth-wide entries for the redevelopment of Whitehall and the Palace of Westminster. He was also researching overseas libraries, as background for plans for a new State Library of Victoria.Colour slide in a mount. Meeting House, Sussex University, Falmer, England, 1966. (Architect: Sir Basil Spence.)Inscribed Made in Australia / 18 / AUG 71M1 / Sussex Univslide, robin boyd

In April-May 1971, Robin and Patricia Boyd travelled to Honolulu, east coast USA and London. In London he was one of the judges for the Commonwealth-wide entries for the redevelopment of Whitehall and the Palace of Westminster. He was also researching overseas libraries, as background for plans for a new State Library of Victoria.Colour slide in a mount. Arts Building A (on right), Sussex University, Falmer, England, 1966. (Architect: Sir Basil Spence.)Inscribed Made in Australia / 19 / AUG 71M1slide, robin boyd

Rev. Graeme Dudley Bence was born into a Methodist family on 24 December 1930 in the coal mining town of Tonyrefail, New South Wales. His family moved to Bornemouth England in 1931. He married Doreen in Bristol on 21 June 1952. Rev. Bence was ordained at East Cliff Congregational Church Bournemouth on 26 May 1953. He was commissioned to the sevice of the London Missionary Society in Papua and subsequently served in Australia starting at Hughesdale Congregational Church from 1958 to 1965 and Wyclif Congregational Chruch Surrey Hills from 1965 to 1972. In 1972 he accepted a call to the Nightcliff Church in Darwin and became Assistant Director of Mission and Service in the Uniting Church of North Australia. The Northern Synod elected Graeme Moderator from 1981 to 1983. He returned to Victoria in 1986 and retired to Rosebud in 1991. He died on 31 July 1994.Head and shoulders drawing in profile of Rev. Graeme Bence.bence, graeme

Rev William Butters (1810 - 1887). Born Hibbaldstone, Lincolnshire on 24 January 1810. Entered the Wesleyan ministry in 1833 and sent as a missionary to Van Dieman's Land. Worked with convicts at Port Arthur, then served at Hobart, Ross and Launceston. In 1850 he was appointed to Melbourne. His health failed during the unprecedented difficulties initiated by the discovery of gold in 1851. Appointed to Adelaide 1855 - 1862. returned to Victoria in 1862, but his health broke down completely and he returned to England in 1863 and became a supernumerary. A founder of the Wesleyan Mission Carlton. President of the Australasian Conference in 1858. William Butters lived for 24 years in the London (Brixton) circuit before dying suddenly on 10 October 1887.B & W waist length printed etching of Rev. William Butters"Revd William Butters President of the Australasian Conference"william butters, wesleyan, methodist, minister, chaplain, port arthur, van dieman's land, wesleyan mission carlton, president of conference

Rev. Daniel James Draper (1810 - 1866). Born Wickham, Hampshire 28 August 1810. In 1830 joined the Methodist Society at Fareham and became a local preacher. Nominated in March 1834 as a candidate for the Wesleyan Methodist ministry. Appointed preacher on probation to the Charteris circuit. Married Sarah Webb in September 1835, ordained 7 October 1835, sailed for Australia on 13 October 1835. Served at Parramatta, where his wife died on 16 February 1838. Married Elizabeth Shelley (1808 - 1866) daughter of William Shelley, formerly a missionary in Tonga and Tahiti in July 1939. Served in N.S.W., Victoria and South Australia. Elected President of the 1859 Conference. Granted leave in 1865 to return to England as the Australian representative to the British Conference. He was returning to Australia on the SS London in January 1866 when he and his wife, along with 244 others, perished when their ship sank during a fierce storm in the Bay of Biscay.Sepia toned, full length carte de visite studio portrait of Rev Daniel J. Draper.daniel james draper, sarah webb, elizabeth shelley, ss london, bay of biscay, methodist, wesleyan, minister, president of conference, shipwreck

Mrs Elizabeth Draper (1808 - 1866). Second wife of the Rev. Daniel James Draper (1810 - 1866). Born Wickham, Hampshire 28 August 1810. In 1830 joined the Methodist Society at Fareham and became a local preacher. Nominated in March 1834 as a candidate for the Wesleyan Methodist ministry. Appointed preacher on probation to the Charteris circuit. Married Sarah Webb in September 1835, ordained 7 October 1835, sailed for Australia on 13 October 1835. Served at Parramatta, where his wife died on 16 February 1838. Married Elizabeth Shelley (1808 - 1866), daughter of William Shelley, formerly a missionary in Tonga and Tahiti in July 1939. Served in N.S.W., Victoria and South Australia. Elected President of the 1859 Conference. Granted leave in 1865 to return to England as the Australian representative to the British Conference. He was returning to Australia on the SS London in January 1866 when he and his wife, along with 244 others, perished when their ship sank during a fierce storm in the Bay of Biscay.Sepia toned, carte de visite studio portrait of Mrs Elizabeth Draper, seated at a table.daniel james draper, sarah webb, elizabeth shelley, ss london, bay of biscay, methodist, wesleyan, minister, president of conference, shipwreck

Rev. Daniel James Draper (1810 - 1866). Born Wickham, Hampshire 28 August 1810. In 1830 joined the Methodist Society at Fareham and became a local preacher. Nominated in March 1834 as a candidate for the Wesleyan Methodist ministry. Appointed preacher on probation to the Charteris circuit. Married Sarah Webb in September 1835, ordained 7 October 1835, sailed for Australia on 13 October 1835. Served at Parramatta, where his wife died on 16 February 1838. Married Elizabeth Shelley (1808 - 1866) daughter of William Shelley, formerly a missionary in Tonga and Tahiti in July 1939. Served in N.S.W., Victoria and South Australia. Elected President of the 1859 Conference. Granted leave in 1865 to return to England as the Australian representative to the British Conference. He was returning to Australia on the SS London in January 1866 when he and his wife, along with 244 others, perished when their ship sank during a fierce storm in the Bay of Biscay.B & W waist length printed etching of the Rev. Daniel J. Draper"Revd. Daniel J. Draper. President of the Australasian Conference 1859."daniel james draper, sarah webb, elizabeth shelley, ss london, bay of biscay, methodist, wesleyan, minister, president of conference, shipwreck