Metal detecting in Australia.Orange soft cover book with title and author in black print. Photograph of man with metal detector.metal detecting

Gold Fever illuminates Drury Lane walkway entrance to Bridge Street Mall. The multiple metal forms act like mobiles suspended from the wall line out into the centre of the walkway. The flexing motion of the rolled metal and traffic reflectors wrapped on the ends creates movement and reflections in the laneway. This movement follows a pricing graph for gold from 1851 to 2011. This zigzagging golden graph line tells the tale of the gold rush spreading like lightning across the world. The artwork is of historic and aesthetic significance to the people of Ballarat Gold coloured bended metal, painted metal formed wall fitting and stoppers reflectors installed on wallGOLD FEVER/ Artists: Sue Buchanan and Eli Gianninigold fever, gold rush ballarat

This is a metal trunk that was issued to 418087 F/O L C Dowling RAAF No1, F/O Dowling served with the RAAF during WW2.This is an original issue trunk that belonged to 418087 F/O DowlingAn oblong metal trunk, black.418087 F/O L C Dowling, RAAF No1ww2, 418087 f/o l c dowling, raaf, metal trunk

Vintage wooden shaft, metal undercarriage race sulky. Used by the Conway family from Hopetoun.A good example of wooden shafted sulkies used in trotting races before being banned for safety reasons.Royal Speed, hickory shafted race sulky in yellow and purple. Chromed metal undercarriage, hickory shafts, metal fittings.Wire spoked wheels with rubber inflatable tyres.Royal Speed, D Conway.trotting, sulky, royal speed, brown brothers adelaide, danny conway, ross conway, copper satin

Trucks of this type were built to carry salt from the saltpans of Cheetham Salt Company works, at Laverton, Moolap and Geelong. Made from wood and steel, it was found that the wood would not erode as much as steel from the salt and this is the reason these vehicles have metal on the exterior of the wagon. Later new stainless steel hopper trucks were used at the works. Historic - Industrial narrow Gauge railway - Cheetham Salt Company at Laverton, Moolap and Geelong.Two Cheetham Salt Hopper Trucks Gauge 2'0" Made from Wood & Steel No. 12 on metal frame of one of the Cheetham Salt Hopper truck A second hopper truck is not numbered.puffing billy, industrial narrow gauge railway, cheetham salt company, gauge 2' 0", salt

The personal 'carry-all', a cloth apron like article was utilised by Thomas Hamilton Osborne in his work with the Warrnambool Steamship Navigation Company. He was Company manager in 1883 until its dissolution in 1899. Osborne wrote many articles on early Warrnambool, particularly maritime material under the name of " Sliding Gunter". When he died he was buried at sea off the breakwater.His sister Mrs Annabella Kell is thought to have made this article.This is a significant item as T.H.Osborne was a key figure in 19th Century Warrnambool history, particularly in maritime affairs. Six sided, scalloped edges, four pockets, two metal hooks, purple woven fabric with yellow and gold embroidery, lifebuoy outline with W.S.N.Co and THO initials embroidered and two flags. Machine sewing of pockets and tab to base apron.W.S.N.Co THO initials on top of each other Two metal hookswork apron, warrnambool steamship navigation company, wsnc, thomas hamilton tracey osborne, annabella kell, sliding gunter

The Taylor Slate was developed by Rev. William Taylor in England in the mid 19th century it was in common use until the early 1970's and enabled blind or vision impaired students to do maths calculations by arranging metal pegs in the slate. The main part of the slate is a metal sheet with 432, 8 sided holes which small metal pegs are inserted. The pegs have different shapes on their ends. These are used to represent different numbers and symbols depending on the way the pegs are placed in the slate and which combinations of pegs are used.1 silver rectangular metal mathematical slate including tray braille equipment, education

Wooden mallets are usually used in carpentry or by a cooper to knock wooden pieces together, or to drive barrel bungs, dowels or chisels. A wooden mallet will not deform the striking end of a metal tool, as most metal hammers would. It is also used to reduce the force driving the cutting edge of a chisel, giving better control. Hardwood mallets are also used by a cooper to knock bungs or other wooden parts of a barrel in place.A significant tool a carpenter or cooper would use to knock wooden staves or furniture parts in place without damaging the soft surface of the timber being used. Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Mallet wedge shaped with metal handleNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers tools, wooden mallet, barrel bung, carpenters tool, hammer

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.RAASC officer's metal collar badge. The badge is bi-metal construction using silver and gold coloured metals. The silver metal background features a Queen's Crown and a seven-pointed star. Gold coloured metal is circular in shape with a royal cypher in the middle. Blue and red enameling in the centre. On the back are two loop fittings.Stamped on gold coloured metal: ' ROYAL AUSTRALIAN ARMY SERVICE CORPS'. Printed in gold on blue enamel garter: 'MONI SOIT QUI MAL Y PENSE'. Stamped on back: 'STOKES, MELB'.badge, uniform, royal australian army service corps, kevin john herdman

Unknown1. Pith Helmet - cotton brown, made of pith, inner leather band, leather chin strap, black ribbon band. 2. Dress Pith helmet - plastic white with yellow metal decorations. Leather & yellow metal chin strap. 3. Dress Pith helmet - black velvet cover, yellow metal decorations, leather and yellow metal chin strap, insignia, inner lining leather, red satin.1. Nil. 2. Nil. 3. Insignia - metal crown, lion, unicorn "Diell et Mon Droit". Royal Army Medical Corps.ww2, hats, uniiform

This metal frame opens from the side to allow paper to be placed between the two pieces and held into place with a metal clasp on the side. The elastic strands provide a guide to the writer to maintain a straight line of writing, with the beads allowing indication of space between words or sentences. This frame allows those who have deteriorating sight to continue writing hand written notes.1 japanned metal frame with elastic and beadsassociation for the blind, assistive devices

Miniature model of a WW2 era Avro Anson twin engine aircraft mounted on an ashtray. The aircraft is supported by a curved arm attached to the circular ashtray base. The base has a small metal RAAF 'winged eagle' insignia attached to the front edge. The items have been made from chromed metal materials. The RAAF was equipped with Avro Anson aircraft in the late 1930 period prior to WW2. These aircraft were used by the RAAF for general and maritime reconnaissance and training throughout WW2 and into the early 1950s. The first version of the Avro Anson was developed in 1935 by the British Avro aircraft company.Chromed metal RAAF 'winged eagle' insignia on the front edge of the base.plane, trench art, ashtray, aircraft, souvenir, avro anson

Metal plate commemorating the Coronation of Queen Elizabeth in 1953. Plate is edged in red with gold embellishment. Image of Queen Elizabeth in centre of plate.Portland Ware, made in England. The Metal Box Company Limited. Her Majesty Queen Elizabeth 11.royalty, british, queen elizabeth

grinding grainWooden delivery /storage box on top of metal Grister with three cogs and flywheel [approx. 30 cm diameter] and metal grinding cylinders [rollers] with horizontal grooved lines all around .This is bolted to a wooden stand [painted green] which has a wooden box to receive the crushed grain Rollers are adjustable .Machine driven by flat leather belt on a pulley from a small stationary engine Metal plaque attached to top of delivery box. J Buncle Parkside Ironworks North Melbournegrain, grister, farming, machinery

Made of metal and wood. Set in a cabinet with a drop down bench that can be rested on the open door to extend bench space. Metal treadle and what appears to be an electric treadle and and electric light. Accompanied by original sales docket and Instruction booklet“Jones” Cabinet model Sewing machine Made in England Medium CS (Cylinder shuttle). Engraved pattern around edge of metalmachine sewing

A sturdy metal container used to carry liquid, possibly a miner's drink bottle.Blue enamel drink container with white enamel interior and metal handle.bottles, drink bottles

Mechanical resuscitation devices, such as the Pulmotor and Lungmotor, were popular in the early part of the twentieth century. Their use waned in the 1920s as significant bodies like the British Medical Research Council and American Red Cross refused to endorse them. The most popular of the resuscitators to emerge in the 1930s was the E&J (Ericson and Johnson) resuscitator. The device was soon widely available, vigorously promoted with support from many medical practitioners. They were soon to be found in hospitals, emergency services like the ambulance and fire brigade, and voluntary life-saving organisations. In Australia, Norman James, director of anaesthesia at the Royal Melbourne Hospital, developed an interest in equipment for ambulances and the resuscitation of drowning victims. Little in the way of practical, portable equipment was available to either the ambulances or the voluntary life-saving organisations, such as Surf Life Saving Australia (SLSA); American resuscitators, like the E&J, were expensive and bulky to import. James designed a simple portable resuscitation device for local use after being approached by Jack Conabere, secretary of the Elwood Life Saving Club (ELSC). The resulting Royal Melbourne Hospital resuscitator, or the R.M. resuscitator as it was marketed, was a simpler, manual version of those available overseas. It was gas driven with a plunger, marked “Press”, and a safety valve. The small working unit attached directly to the facemask. Once the patient was positioned facedown and the airway cleared of debris, the mask was placed firmly over the face. The plunger allowed gas to flow and lung inflation; releasing the plunger allowed expiration. This simple resuscitator was marketed by Commonwealth Industrial Gases (CIG) and became very popular in Australia with volunteer and professional rescue organisations. It represents one of the many innovations in resuscitation equipment that resulted from cooperation between volunteer life savers and medical practitioners. Norman James worked closely with Jack Conabere and the Government Pathologist to develop the equipment. ELSC was the first life saving club to use the resuscitator on the beach. While conducting an early training exercise on 23 December 1951, they used it to successfully resuscitate a man who had drowned after capsizing his home made yacht. The R.M. resuscitator was also used in more inventive ways. At Fairfield Hospital in Melbourne, a group of physiotherapists and doctors did some innovative work with polio patients, teaching them glossopharyngeal (or “frog”) breathing, as a means of becoming less dependent on ventilators. In 1981, the Australian Standards Association stated that the RM head failed to meet its revised standards and it was withdrawn from the market. Red leather suitcase with black leather trim with metal studs. There are clip locks for locking the suitcase in the closed position. The suitcase contains equipment for oxygen resuscitation. There is a space allocated for two oxygen cylinders, however there are no cylinders present.Embossed into metal plaque: The C.I.G. / Oxy-viva / PORTABLE UNIVERSAL OXYGEN RESUSCITATORresuscitation, portable, surf life saving australia, royal melbourne hospital, rm resuscitator

Creda had its origins in two companies: the Simplex Steel Conduit Company Ltd. (later Simplex Conduits Ltd.) formed in 1898, and the Credenda Company Ltd. which was the first to use Creda as a brand name. These companies were two of the founding companies of Tube Investments Ltd. From 1919, the Simplex name was used for installation equipment ranges, and Creda for heating, cooking and other domestic appliances. In 1932 Simplex Conduits Ltd. and the Credenda Company Ltd. merged to form the Simplex Electric Company Ltd., but the distinct Simplex and Creda brands continued in use. In 1987 the Simplex Electric Company was taken over by General Electric Company, and formed part of General Domestic Appliance Company Ltd. the following year. In 2015 the large corporation, Whirlpool, took over the Indesit Appliance Company, which owns the Creda brand name. Since then the Creda brand as such has become rare, and where it does appear it is as a re-badged version of Indesit and Hotpoint home appliances.This iron is typical of the electric irons used in the 1950s. It is representative of appliances used by women in their domestic roles.A "Creda" Electric Iron with plug-in cord. It has a metal steel base iron with a wooden handle and a thumb rest. The handle is bolted onto the iron with 2 large screws. The cord socket plugs in behind the handle of the iron. On attached metal plate: "CREDA/ Cat. No 6; Volts 240; AMPS 8"domestic appliances, creda irons

This item is a metal stand used for the storage of ink stamps it was used in the Shire of Bulla office in Macedon Street, Sunbury.A green painted metal stand for storing ink stamps.shire of bulla, george evans collection

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII.Metal domed chamber with a bulb attachment on an elbow joint for rebreather bag. There is also a connector for a facemask, but no facemask.Engraved on dome of chamber: Clover's Inhaler / Mayer & Meltzer / London •Moulded in to metal at connector: MAYER & MELTZER RD. NO. 212327joseph clover, closed administration, mayer & meltzer

42 naval uniform buttons - metal and fabric covered assorted sizes. 3 pieces ribbon (navy and red striped).Metal buttons - Rising Sun and Anchor (maker's names on back). Fabric covered buttons - 'Fast shanks' (on back)naval uniform buttons

Although manufactured in 1939 it may be possible that it was issued later during the Korean War (1950-1953) as the burn marks on the exterior sides may indicate the use of a hexamine stove which came into use by the Australian Army in the 1950's.Representative of an army issued accoutrement from the Mid 20th Century which may have been used during the Korean War.Well used military mess tin (aluminium), larger one of nest of two (smaller one missing) with flip over metal (carbon?) handle secured to short end by metal loop and rivets.Inscribed to metal loop fastening flip over handle to tin is the maker’s mark ‘C&B Ltd. 1939’ and arrow insignia for ‘Department of Defence’.cooking, hexamine stove, canteen, mess tin

Eduard Lehman, Zurich Switzerland patented a metal barrel shaped hand washing machine with a hand crank to operate a metal plunger in 1919. Such hand washing machines were used by settlers in Moorabbin Shire An 83 year old Visitor on site remembers using this type of washing machine. He had to push the agitator for 5 minutes. Prior to his mother buying the washer, all laundry was hand washed in troughs.Such hand washing machines greatly reduced the workload of the women of pioneer familes in Moorabbin ShireThis hand washing machine c1919 consists of a metal barrel, standing on 4 legs, and has a hand crank to operate a cone shaped metal agitator.THE / LEHMAN/ COMPRESSED AIR AND / VACUUM WASHING MACHINE / Pat. No. 50614/30lehman eduard, hand washing machines, laundry equipment, pioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham

These metal identity tags were worn by RAAF personal during WWIIFlight Sergeant Dorizzi enlisted in the RAAF in May 1944 until his discharge in December 1945 and was a member of 12 Squadron.Round metal Identity Tag with hole in top for attachment.Fluting around edge and engraved.DORRIZZI.W.E. 442160, RAAF, R.C.

This machine was the first double action (suction and pulsator) milking machine. This method is still in use today. Invented by Alexander Gillies,of Terang. The LKG milking machine is of State significance because it represents a high degree of technical achievement. It demonstrates the innovation developed by a Western District farmer, Alexander Gillies, that enabled dairy farms throughout Victoria to move successfully from hand milking to machine milking, thus contributing to the mechanisation of one of Victoria's major rural industries. Source: Cheese World Museum Significance Assessment, Lesley Alves, December 2009Cone shaped metal pail with a carry handle attached near the top and a tipping handle near the base. Removable top has pulsator mechanism which sealed the pail. Brass cover plateBrass cover plate inscribed Trade Mark LKG. Metal disc inscribed K136.dairy industry, machinery, milking machines, alexander gillies, terang

Clothing. Black and white two piece bikini, size 10. Strapless top of nylon fabric - black with white spots. Two cups separated at centre with a decorative metal zipper (6cm). Each cup has a shaped foam insert. Bikini bottom of nylon fabric, black and white horizontal stripes (1.5cm). Hi cut leg. Two decorative black and white ties stitched on side seams (16 cm).Metal tag ''RIP CURL'' on LHS of bikini topcostume, female, black and white two piece bikini

White metal medal issued to commemorate Melbourne's centenary 1934-35. This medal was given out to Victorian school children; 325,600 white metal medals were struck. The medal references Portland, the location of Victoria's first settlement. The Henty brothers, entrepreneur farmers and whalers, established the state's first permanent European settlement in Portland in 1834. Melbourne was established the following year by a party of settlers led by John Batman.Commemorates the settlement of Portland, Melbourne and Victoria, 1834 - 1935Round two sided silver metal medalFront - Centenary of Victoria 1934 - Portland 1934 Rear - Centenary of Melbourne 1935centenary, victoria, melbourne, medal

Item is used with battle dress pants and jacket.Suspenders for Patt. '49 Khaki Battle Dress Trousers. Navy blue with white dot cotton stitching pattern covering material. Brown leather patches/detail on each of the four ends before attachment loops. Two gold metal clips on the ends of each of the two straps. On each metal clip - inscription 'will not rust'. On one leather patch - 'Domo' military uniforms, army, army suspenders, suspenders