Showing 198 items
matching osaka
-
Robin Boyd Foundation
Slide, Robin Boyd, 1961
Robin Boyd wrote two books on Japanese architects and architecture - “Kenzo Tange” published by George Braziller in 1962 and “New Directions in Japanese Architecture” published by Studio Vista in 1968. During the 1960s he travelled several times to Japan to research these books and as part of his role as Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka.Colour slide in a mount. Children's Library, Hiroshima, Japan, 1951-3. (Architect: Kenzo Tange.)15 / Encircled 59 (Handwritten) / Encircled 73F (Handwritten)japan research trip, slide -
Robin Boyd Foundation
Film, 1970
This film is consists of 1896 Melbourne Cup, 1906 Sydney street scenes and Baldwin Spencer footage of Australian indigenous ceremonial dance. These sequences are repeated several times. This film was included in the longer film item AV004. These would have been selected by Robin Boyd for screening at the Australian Pavilion at Expo 70 in Osaka, where Robin Boyd was Exhibitions Architect.16mm black and white, silent film on reel inside a circular metal canister (185mm diameter) with lid. Duration 7:59 minutesexpo 70, melbourne cup, spencer baldwin, 1906 sydney, robin boyd -
Robin Boyd Foundation
Slide, Robin Boyd, 1961
The Sogetsu Artistic Center was designed by Kenzo Tange. Robin Boyd wrote two books on Japanese architects and architecture - “Kenzo Tange” published by George Braziller in 1962 and “New Directions in Japanese Architecture” published by Studio Vista in 1968. During the 1960s he travelled several times to Japan to research these books and as part of his role as Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka. Colour slide in a mount. Garden at Sogetsu Artistic Center, Tokyo, Japan. (Architect: Isamu Noguchi.). Made in Australia / 17 / 1tokyo, slide -
Robin Boyd Foundation
Audio - Tape, 1970
This audio tape consists of sound effects used in the over 25 exhibit boxes which were attached to the Space Tube designed by Robin Boyd for the Australian Pavilion at Expo '70 in Osaka. The sound effects included are wind, fire, orchestra, scientific instruments, kettle whistling, transport, thunder, pop music, jazz, abc theme music, crowds talking, singing in the shower, racing car, laughing and applause.Reel tape (175mm) with labels. Duration: 11:18 minutesexpo 70, robin boyd, ohm2022, ohm2022_31 -
Ringwood and District Historical Society
Newspaper, Scrapbook Clipping, Library Collection, Ringwood, Victoria
Newspaper Clipping from "The Mail", 17-8-1993, Page 18 . Sports star - Not horsing around - by Jodie Haythorn North Ringwood horse-woman Trudi Yates is a step closer to realising her dream of international stardom. The 22 year old has spent the past six months working in Nara, near Osaka, as a groom for a member of the Japanese Olympic equestrian show-jumping team. She hopes to apply what she has learnt to her horses. -
Robin Boyd Foundation
Slide, Robin Boyd, 1961
Robin Boyd wrote two books on Japanese architects and architecture - “Kenzo Tange” published by George Braziller in 1962 and “New Directions in Japanese Architecture” published by Studio Vista in 1968. During the 1960s he travelled several times to Japan to research these books and as part of his role as Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka. Boyd called it the Sogetsu Art Center in his book “Kenzo Tange”, where it is extensively illustrated (Plates 77-82).Colour slide in a mount. Sogetsu Art center (1958), Tokyo, Japan. (Architect: Kenzo Tange.)Made in Australia / 18japan, slide -
Robin Boyd Foundation
Slide, Robin Boyd, 1965
Robin Boyd wrote two books on Japanese architects and architecture - “Kenzo Tange” published by George Braziller in 1962 and “New Directions in Japanese Architecture” published by Studio Vista in 1968. During the 1960s he travelled several times to Japan to research these books and as part of his role as Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka. The Walsh Street Archive has Boyd's handwritten manuscript 'Tokyo from the Monorail', published as ‘Modern Japan on a Concrete Beam’ in 'The Australian' 31/07/1965 (see item D001).Colour slide in a mount. The Tokyo Monorail, 1964, Tokyo, JapanMade in Australia / 14 / JUL 65M / Montreal Expo (Handwritten)tokyo, robin boyd, slide -
Robin Boyd Foundation
Slide, Robin Boyd, 1961
Robin Boyd wrote two books on Japanese architects and architecture - “Kenzo Tange” published by George Braziller in 1962 and “New Directions in Japanese Architecture” published by Studio Vista in 1968. During the 1960s he travelled several times to Japan to research these books and as part of his role as Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka. The Sogetsu Art Center (1958) was also known as the Sogetsu Hall and Office. Boyd called it the Sogetsu Art Center in his book “Kenzo Tange”, where it is extensively illustrated (Plates 77-82).Colour slide in a mount. Garden at Sogetsu Art Center (1958), Tokyo, JapanMade in Australia / 16tokyo, slide -
Robin Boyd Foundation
Slide, Robin Boyd, 1961
Robin Boyd wrote two books on Japanese architects and architecture - “Kenzo Tange” published by George Braziller in 1962 and “New Directions in Japanese Architecture” published by Studio Vista in 1968. During the 1960s he travelled several times to Japan to research these books and as part of his role as Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka. The Sogetsu Art Center (1958) was also known as the Sogetsu Hall and Office. Boyd called it the Sogetsu Art Center in his book “Kenzo Tange”, where it is extensively illustrated (Plates 77-82).Colour slide in a mount. Sogetsu Art Center (1958), Tokyo, Japan. (Architect: Kenzo Tange.)Made in Australia / 14japan research trip, slide -
Robin Boyd Foundation
Slide, Robin Boyd, 1961
Robin Boyd wrote two books on Japanese architects and architecture - “Kenzo Tange” published by George Braziller in 1962 and “New Directions in Japanese Architecture” published by Studio Vista in 1968. During the 1960s he travelled several times to Japan to research these books and as part of his role as Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka. The Sogetsu Art Center (1958) was also known as the Sogetsu Hall and Office. Boyd called it the Sogetsu Art Center in his book “Kenzo Tange”, where it is extensively illustrated (plates 77-82).Colour slide in a mount. Sogetsu Art Center (1958), Tokyo, Japan (Architect: Kenzo Tange.)Made in Australia / 15 / 9 (Handwritten)slide, robin boyd -
Bendigo Military Museum
Photograph - PHOTOGRAPHS, BCOF, JAPAN, possibly pre WW2
Items in the collection re Clarence Shearing, refer Cat No 7089.16P for his service details.Photographs B & W, colour enhanced of scenes and buildings in Japan all various sizes.1 & 2. Osaka Castle. 3. Bridge at Arashiyama near Kyoto. 4. Itsukushima Jimja shrine at Miyajima. 5 & 6 Hsukushima floating Torri Gate. 7. Miyajima. 8. Wagoga castle. 9. Inuyama Castle at River Kiso. 10. Torri Gate at Yosukuni Shrine. 11. Amakusa Islands. 12. Deer Park at Nara. 13. Kinkaku-ji or Golden gate Shrine in Kyoto. 14. Temple in Kyoto. 15. Kyogoka (Theatre street) Kyoto. photographs, bcof, japan -
Robin Boyd Foundation
Film, 1970
This film is a curated collection of iconic early Australian films. There are three sequences. The first sequence consists of a segment of 1908 boxing match between Jack Johnson and Tommy Burns at Sydney Stadium, 1906 Hawthorn street scenes, and a 1909 VFL Football final. The second sequence consists of 1896 Melbourne Cup, 1906 Sydney street scenes and Baldwin Spencer footage of Australian indigenous ceremonial dance. The third sequence consists of a bush ranger scene from "Robbery Under Arms" (1920), a great escape scene from "The Sentimental Bloke" (1919) and Sydney Harbour boat chase from "Let George Do It" (1938). These sequences are repeated several times. These would have been selected by Robin Boyd for screening at the Australian Pavilion at Expo 70 in Osaka, where Robin Boyd was Exhibitions Architect. 16mm black and white silent film inside a circular metal canister with lid. Duration-39:33 minutes. Head out - Loose archival wind placed in archival film storage container.expo 70, jack johnson, tommy burns, melbourne cup, spencer baldwin, early australian film, robin boyd -
Melbourne Tram Museum
Album - Photo Album, Colin Jones, "Trams 1883 - 1993", 1990's
Photo Album, grey decorative front cover with a grey heavy card slip case, 30 leaves of heavy paper, each separated by a semi clear protective sheet. Compiled by Colin Jones with a title sheet "Trams 1883 - 1993" with Colin standing in the front of Brisbane Tramway Co. No. 47 at the Ferny Grove Museum. Bound with end papers. Photos retained by clear photo corners. Features photos by Colin of: Victor Harbor Surabaya Indonesia Melbourne cable trams, Sydney Steam tram in the UK Ballarat Bangkok Semarang Indonesia Adelaide Brisbane Melbourne Sydney Bendigo Launceston Osaka Japan Perth Kyoto Dalian Japan Fukuoka Japan Kanazawa Japan Hong Kong Sendai Kita Kyushu Hobart Lopburi Kobe Hiroshima Tokyo Matsuyama Japan Nagaski Various Museums in Australia. Sample pages only scanned.trams, tramways, melbourne, album, japan, indonesia, australian tramways -
Seaworks Maritime Museum
Clock, LORD KING
International time clock with different time zones of the world. Inside is a key for tuning. Blue with gold design of city and plane.PORT OF YOKOHAMA/ 1859/ GMT/ LONDON/ AZORES/ BUENOS AIRES/ RIO DE JANEIRO SAO PAULO/ SANTIAGO/ TORONTO / WASHINGTON / NEW YORK / BOGOTA, LIMA / MEXICO CITY / CHICAGO / NEW ORLEANS / DENVER / VANCOUVER / SAN FRANCISCO / LOS ANGELES/ HONOLULU/ ANCHORAGE/ MIDWAY/ DATE LINE / AUCKLAND/ MELBOURNE/ SYDNEY, GUAM/ TOKYO, OSAKA, SEOUL/ BEIJING/ TAIPEI, MANILA/ HONG KONG/ SINGAPORE/ KUALA LUMPUR/ BANGKOK/ JAKARTA/ CALCUTT/ BOMBAY/ NEW DELHI/ KARACHI/ MUSCAT/ TEHERAN/ KUWAIT/ MOSCOW/ JOHANNESBURG/ ATHENS, BEIRUT/ CAIRO, TRIPOLI/ BERLIN, ROME/ PARIS, MADRID/ AMSTERDAM/ LORD KING/ JAPAN" "PMA 0346" -
Glenelg Shire Council Cultural Collection
Book - Collection of reference texts on shells, 1964-2004
Collection of reference texts on seashells. Includes: Dance, Peter S., "Seashells", London: Treasure Press, 1971 (4111.1); "Handy Pocket Guide to Tropical Seashelss of Indonesia, 2004 (4111.2); Dance, Peter S., "Shells", Pymble: Harper Collins, 1992 (4111.3); Linder, Gert, "Seahshells of the world", Sydney: Australia & New Zealand Book Company, 1977 (4111.4); Wilson, B. R. & K. Gillett, "Australian Shells", Sydney: Reed, 1971 (4111.5); Harasewych, M.G., "Shells: Jewels from the Sea", New York: Rizzoli, 1989 (4111.6); "The Golden Stamp Book of Seashells", Wisonsin: Golden Books, 1975 (4111.7); Taylor, John & Jerry G. Walls, "Cowries", Neputune City: T.F.H. Pblications, 1975 (4111.8); Child, John & John Currey, "Shells and the Seashore", Melbourne: Landsdowne Press, 1972 (4111.9); "Sea Shells", London: Orbis Books, 1971 (4111.10); Dance, S. Peter, "Shells and shell collecting", London: Hamlyn, 1972 (4111.11); Clayton, JM, "All colour book of Seashells:, London: Octopus Books, 1974 (4111.12); "Exploring the Secrets of Nature", London: Reader's Digest, 1994 (4111.13); Habe, Tadashige, "Shells of the Western Pacific in colour: Vol I", Osaka: Hoikusha, 1964 (4111.14); Habe, Tadashige, "Shells of the Western Pacific in colour: Vol II", Osaka: Hoikusha, 1964 (4111.15); Dance, Peter S. (ed.), "The Encyclopedia of Shells", Sydney: Australia & New Zealand Book Company, 1977 (4111.16); Hinton, Alan, "Guide to Shells of Papua New Guinea", Port Moseby: Robert Brown and Associates, nd (4111.17); Hinton, Alan, "Guide to Australian Shells", Port Moseby: Robert Brown and Associates, nd (4111.18); "The How and Why wonder book of seashells", New York: Grosset & Dunlap, 1972 (4111.19); Child, J., "Australian Golden Stamp Book: Australian Seashells",Sydney: Golden Press, 1971 (4111.20); Hinton, Alan, "Shells of New Guinea and the Central Indo-Pacific", Port Morsby; Milton: Robert Brown and Associates Pty Ltd; The Jacaranda Press, 1975 (4111.21); Coleman, Neville, "Shells in Australia", Sydney: Reed, 1978 (4111.22); Coleman, Neville, "What Shell is That?", Sydney: Ure Smith Press, 1988 (4111.23); Coleman, Neville, "Shells Alive!", Adelaide: Rigby Publishers, 1981 (4111.24); Deas, Walter, "Seashells of Australia", Adelaide: Rigby Ltd, 1974 (4111.25).maritime, marine ecology, sea shells, reference, natural history -
Upper Yarra Museum
Razor, Cut throat
Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang -
Seaworks Maritime Museum
Shipbuilders model, SS ARGUS (1889-1907) - Steel steamship built by Palmers & Co., at Newcastle on Tyne for Archibald Currie & Partners, Melbourne, SS Argus, 1889-1907
Steel screw steamer launched 1889 at Newcastle on Tyne by Palmers & Co., built for Archibald Currie and Partners - the Currie Line of Melbourne. Gross tonnage: 2,792, Length: 99.06m (325'). Width: 12.3m (40.3'). Triple expansion steam engines producing 363 nhp. Avge speed 11 knots. Coal consumption 26 ½ tons per 24 hours. Steel hull, one funnel, two masts, barque rig. • 1889: Argus launched. Worked in the Australia to India trade, passengers, goods and horses. • 1891 July: While taking coal from Newcastle to Singapore, ran onto sunken rock in Gaspar Strait (in Indonesia). Watertight bulkheads held, got to Singapore, was repaired for two months, 60,000 Straits dollars (about £12,000). • 1895 July: While taking 400 horses to Colombo, ran onto reef near Somerset, North Queensland. holed, water in two compartments. 400 tons coal jettisoned, finally got off in spring tides. • 1901 Feb: During Boer War took Victorian contingent, 5th Mounted Rifles, fromMelbourne to Durban and Cape Town, with 500 horses. • 1901 Dec: Took horses for Boer War from Brisbane to Durban. • 1903 31 July: Leaving Sydney for Calcutta with 86 horses, 20 passengers including the Sultan of Johore, was rammed by the incoming steamer Mildura (on the wrong side of the channel). Argus's side plating was cut from deck to below waterline, had to be beached on Goat Island to prevent sinking. Refloated 2 August and repaired. • 1905: Argus sold to the Japanese shipping company, Osaka Shosen Kaisha. Renamed Giran Maru. • 1907 11 Sept: Wrecked in Soya Strait, between Hokkaido & Sakhalin Island.Built for Archibald Currie & Partners, Melbourne. Carried passengers between Australia and India and between western and eastern Australia.Large ship builder's model in glass case -
Flagstaff Hill Maritime Museum and Village
Machine - Treadle Lathe, 1920-1923
The lathe-making business incorporated in 1902 as Drummond Bros Ltd originated in the fertile mind of Mr Arthur Drummond, said to have been living at that time at Pinks Hill, on the southern edge of Broad Street Common, west of Guildford. Mr Drummond, whose accomplishments included several pictures hung in the Royal Academy, was unable to find a lathe suitable for use in model engineering. In 1896 he designed for himself a ‘small centre lathe … which had a compound slide rest with feed-screws and adjustable slides’. He also designed and built ‘lathes of 4.5 inch and 5 inch centre height, which had beds of a special form whereby the use of a gap piece was eliminated but the advantages of a gap-bed lathe were retained’. Assisted by his brother, Mr Frank Drummond, who had served an apprenticeship to an engineering firm at Tunbridge Wells, the first lathes were made in a workshop adjoining Arthur Drummond’s house. The demand that speedily built up led to the decision to form a company and manufacture the lathes for sale commercially. Land was acquired nearby, at Rydes Hill, and the first factory built. The enterprise was a success, and the company quickly established ‘a high reputation in this country and abroad for multi-tool and copying lathes, and gear-cutting machines’. Other lathes were added to the range, including the first of the ’round bed’ machines for which the firm became widely known. A Drummond 3.5 inch lathe was among the equipment of Captain Scott’s 1912 expedition to the South Pole, and large numbers of 3.5 inch and 4 inch designs were exported to Australia, Canada and India. By the outbreak of war in 1914, 5 inch, 6 inch and 7 inch screw cutting lathes, arranged for power drive, were on sale. Large orders were received from the government for 3.5 inch lathes, for use in destroyers and submarines, and 5 inch lathes for the mechanised section of the Army Service Corps. The latter were used in mobile workshops. The factory worked night and day to supply the forces’ needs, until production was disrupted by a fire which destroyed a large part of the works in May 1915. As soon as rebuilding was complete work restarted. At the end of the war the entire production was being taken by the Government departments, a special feature being a precision screw lathe, bought by the Ministry of Munitions in 1918. Between the wars Drummond Bros Ltd introduced new machines for the motor vehicle, and later the aircraft industry, and the works were extended on many occasions to fulfill the increasing orders. The Maxicut multi-tool lathe (1925), designed for high-production turning operations, was one of the first machines of this type to be built in England. It was followed (1928) by an hydraulic version for turning gear blanks, and similar work. Further developments provided machines which, during the Second World War, turned all the crankshafts and propeller shafts for Bristol engines. Others, ordered by the Ministry of Supply were employed in turning shells, and many other specific needs of vehicle and aircraft manufacture were catered for by new types of Drummond lathes. Production of the small centre lathes ceased during the war when the company needed to concentrate on building multi-tool lathes and gear shapers. After the war a completely new Maxicut range was introduced, replacing the older versions, and fully automatic. The types were continually developed, and new versions manufactured until the end of the company’s life in 1980. The disappearance from the scene of Mr Arthur Drummond in 1946, and the end of the company’s autonomous existence in 1953 when the company was acquired by William Asquith Ltd, which was in turn bought by Staveley in 1966, meant that the factory at Rydes Hill became one – albeit very effective – part of a large national engineering company. Achievements at the Guildford works during its last years included the development of automated Maxicut gear-shapers in what was ‘probably the most fully automated gear shop in the country’, while a machine from Guildford was sent to the Osaka Fair in 1962. In 1963 an agreement was signed with Hindustan Machine Tools for the manufacture of Maxicut gear-shapers in state owned factories in Bangalore and Chandigarh. During 1963 the two largest multi-tool lathes ever made in the UK were installed in Ambrose Shardlow’s works in Sheffield for handling cranks up to 14 foot long. In 1976 Drummond lathes were included in Staveley’s £14,000,000 installation in Moscow of an automated production line for Zil motor cars. Up to the end invention continued at Guildford: a new Drummond Multi-turn memory-controlled machine was shown at the International Machine Tool Exhibition in 1977. This could not save the works from the pressures of the late 1970s, and Staveley Industries closed its Guildford site in 1980.An early example of a lathe that was designed primarily for the hobbyist model maker. It is in good condition and sought today by collectors as many of it's attributes were innovative at the time and lead to further development and incorporation of some of its features into more industrial models of production machinery. Lathe, round bed, treadle powered lathe, Drummond Type A, Serial number and maker's inscription. 1920-1923, Made by Drummond Brothers in Guildford, Surrey, England. Lathe is complete with Chuck, Tool post and Tail Stock in situ (30 extra parts)"MADE BY DRUMMOND BROTHERS LIMITED - PATENT TEES - RYDE'S HILL n GUILDFORD SURREY", "Serial Number 01470," "L44" or "L45 " flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lathe 1920-1923, round bed lathe, treadle lathe, drummond type a, guildford surrey, drummond brothers guildford surrey england, tread'e