Leather bridle for a horse. Chain and metal bit attached th the leather straps.trades, saddlering, transport, animal

Brace for holding drill bits for drilling holes in wood or steel, with wooden handles.tools, multipurpose, drill

In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764.  Company's later years: Both Thomas's sons, James Harper and Thomas Ogilvie were involved in the continuing life of the firm. James followed in his father's footsteps in becoming a local public figure. He was appointed Deputy Lieutenant of the County of the City of Glasgow and was made a deacon of the Incorporation of the Hammermen of Glasgow in 1919. His brother Thomas Ogilvie was recorded as tool manufacturer and employer in the 1911 census. Thomas Ogilvie's son Thomas Alastair Sutherland Ogilvie Mathieson was born in 1908 took a rather different approach to engineering, however, by becoming a racing driver. In 1947 he wed the French film actress Mila Parély. The firm had won many awards at world fairs for their goods. At the Great Exhibition, London, 1851. Prize medal for joiners' tools in the class of Cutlery & Edge Tools, Great London Exposition, 1862. Prize medal honoris causa. International Exhibition, Melbourne, 1880. Gold medal International Exhibition of Industry, Science and Art, Edinburgh, 1886. Prize medal The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Scotch Eye Auger, Double Twist with Lead Screw 2 inch bit with round shaft leading to handle socketStamped A Mathiesonflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, auger, ring auger, ship building

Thumb Screw bit brace. Wooden handle and breast plate. Thumb screw missing.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, brace, thumb screw bit brace

Auger Bit, Double Twist with screw 35mm1500mm long Round shaft tapered at end.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

8367.1 - Small piece of high-grade coal. Shaped a bit like the head Mjolnir.

Custom made iron snaffle bit with mouthing keys used for breaking in young horses. The horse played with the keys, so that it would end up with a soft mouth. The side bar would help to hold the bit in the mouth. Normally there would be two side bars. The bit is double jointed with a circle in the middle (3.5cm diameter). Hanging from the circle is an oval plate supporting 3 mouthing keys (3.5cm long). The external rings on the bit are 6.5cm diameter with a 19.4cm vertical bar attached to the inner edge of the ring on the right hand side.

Ring Auger, Double Twist with Lead Screw, �" bit, 580mm long, with shaped wooden handle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Expandable Bit metal with part missing Wm Ridgeway Sheffield England trademark Power 180mmLflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Grey/black round axe head; single bit, no handle. Metal is pitted and head is blunt.None. Grey/black metal.timber, forestry

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1900 for military, agriculture and civilian useNickel plated snaffle horse bit, two rings connected to two T-bars in middleequine, military, agriculture, civilian c1900, horse bit

This early draught-horse drenching bit was used by the early vets to administer paraffin oil and perhaps castor oil or epsom salts to a colicky horse. The bit was fitted to the horses mouth like a normal bit. A rope attached to the top of the bit pulled the head of the horse up. The drench was tipped into the funnel.This trickled through the hollow bit and down the throat of the horse. In the 1950's and beyond vets used a stomach tube, passed via the horse's nostril to administer drenches, which was much more effective and safe. This procedure spelt the end of drenching bits which are now only museum pieces.A brass horse drencher. It has a leather strap with a brass funnel. This one was probably used for larger horses.7668 Denyer ECLIPSEdrench horses denyer transport

Contained a stain for the darkening of all equine leather pieces used Ca 1900Imported and retailed bu Holden and frost Ca1900Squat beige ceramic bottle with corked top, used to contain a stain for equine leather bits and piecesShowing saddle stain with trade mark of fox head. label in very poor condition.leather, stain, ca1900

Khaki in colour, with remnants of yellow paint at the front. All the interior is missing. Has quite a bit of rust.Nil.helmets, tin helmets, tin hats, wwii, world war 2, metal helmets, metal hats, army helmets

Ring Auger, Double Twist with Lead Screw. Square shaft with chamfered edges, Bit 2" 630mm L .flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Augur screw bit double twist. ?" screw size. Maker Mathieson. Has broken shaft. Length 530mm flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Ring Auger, Double Twist with Lead Screw, 645mm long.1 inch bit. Rustic handle attached.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Adjustable Angle Bit-stock. Used for drilling in difficult places. Is fully adjustable and pivots around a universal jointflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, angle bit-stock

Shell Bit with Lead Screw, with wooden handle attached. Remains of a number (31 or 81) 260mm x 127mmflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shell bit, lead screw

Railroad Pick, also called a Clay Pick or Dirt Pick. Point one end and chisel bit the other.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, railroad pick, clay pick, dirt pick

Selection of Mills #36 Grenade bits - from Seymour, Vic. Training Ground.. Brit. C'wth, aust manuf'ed.miscellaneous, ww2, army