Group of 19 miners. Sign behind group reads 'Rose + Brown Carpenter's for sluices + cradles'. Alf Rose is behind the bench on the left wearing a waistcoat.mining, mafeking, people

Axe, ships carpenters broard axe. two rivet on side of blade, cross mark on heel. Straight wooden handle cracked with hole in the bottom and rivet. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Colour photograph showing a small building with a sign: C. Cowling monumental mason. Rubbish around the building. Photo taken in Carpenter Street, July 1993.

Account issued to Mr. Steel, Carpenter St., Bendigo, on 11 June 1894 for 2/-/-, from Connelly, Tatchell & Dunlop. Account is outstanding ' for a considerable time'.business, legal, mr. steel, carpenter street, connelly, tatchell & dunlop, mr. steel

Black and white photograph of Doreen Clarke, Michelle and Margaret Newton at the newly opened Crepe Kitchen at 1 - 3 Carpenter Street Lakes Entrance Victoriabusinesses, commerce

Date made August 2008Colour photograph of the Lakes Entrance Entertainment Centre, playground in front of building. This site was originally Carpenters Caravan Park situated on Esplanade. Lakes Entrance Victoriarecreation, resort, room display

Black and white photograph of road works in Carpenter Street affecting the progress of trams. Contractor W. J. Doyle. Inscriptions on reverse: Stamped in black of photo E938.person, individual, basil miller

Construction work in camp 13Black and white photograph of 2 lines of steel posts in front of a line of wooden posts, then carpenters "horse" then Army huts, trees. Some buildings in course of construction.camp 13, construction work in victorian camps

Agfa plastic mount (blue base, white cover) with a photo of Bendigo 30 at Pinder's Loop, Carpenter St. Quarry Hill. Tram has the destination of Eaglehawk ."BES 17" in penciltramways, trams, bendigo, quarry hill, pinders loop, tram 30

number in album 03553.06Colour photograph Betty Carpenter receiving award from Mary Fencham of Rotary at the 17th Lakes Entrance Garden Club Spring Competition. Lakes Entrance Victoriaclubs, rotary club, function

Tram No. 18 was built in 1914 as an E Class tram. It was built in Adelaide and originally operated in Prahran and Malvern before moving to Bendigo in 1951.Black and white postcard showing Bendigo Electric Tram No. 18 with driver, conductor and small boy in Carpenter St (front of Bendigo Cemetery) near Sexton's residence.person, individual, basil miller

Other number 01333.2Black and white photograph of nine people sitting on the front fence of Carpenter's Central Motor Camp watching the New Year's Eve fireworks. Lakes Entrance Victoriaresort, people, fences

Digital image of the Bendigo 28 crossing No. 2 at Pinders Loop in Carpenter Loop on the Quarry Hill line. No. 28 has the destination of Quarry Hill, while No. 2 Eaglehawk. Photo by John Ward 01 - 01- 1972 Slide title "04751 010172 7207-H SECV Birney tram 28 passing bogie tram 2 in Carpenter St on Quarry Hill line Bendigo Vic"trams, tramways, bendigo, carpenter st, pinders loop, quarry hill, tram 28, tram 2

Receipt from J. Harris, Monumental and General Mason, Monumental Works, Carpenter Street. For work done on a Cemetery Monument. Dated March 1921. Also a photocopy of receipt.ephemera, mementoes, malloy family, malloy family document, mrs malloy, j harris

Two other black and white copies, one 9 x 14 cm, second 11 x 21.5 cmSepia photograph showing houses on dunes at New Works. House on right is harbour engineer's house, next Carpenter house, PWD jetty in front. Lakes Entrance Victoriajetties, houses, boats and boating, topography

Black and white photograph of John Carpenter Snr showing a white haired man with trimmed beard wearing collarless jacket, white shirt and narrow ribbon bow tie.genealogy

Tait collection: item 16 of 62 This is the probate document for Harold Dawkins who died in 1898 in Warrnambool. He left no real estate but had personal estate to the value of £369. This was inherited by his widow, Margreta Mary Elizabeth Dawkins. Harold Dawkins’ father, William, established a timber business in partnership with George Hockley in the 1870s in Timor Street. The business was known as Dawkins and Son after 1890 and moved to the corner of Fairy and Lava Streets before again moving to the corner of Lava and Kepler Streets. In 1923 this business was taken over by the Ponting Brothers. Harold Dawkins, a carpenter and builder, married in 1884 and built a house at 68 Hyland Street (previously Nicol Street) which still stands. Harold died of typhoid fever when he was 37 and the family moved to Western Australia. This probate document was prepared by Ernest Chambers, a Warrnambool lawyer with offices in Warrnambool, Koroit and Port Fairy in the late 19th century and early 20th century. This document has been passed down by the successive lawyers occupying the Kepler Street building and was located in the old premises of the legal firm, now defunct, of Mackay Taylor. This document is of considerable interest because it contains information on Harold Dawkins, a resident of Warrnambool in the late 19th century and a member of a prominent Warrnambool family. It is also of importance because it was a document prepared by a local Warrnambool lawyer at that time. This is one sheet of parchment paper folded into two and with handwritten material on three sides. Three of the pages are edged with black lines. A seal of the Supreme Court of the Colony of Victoria is attached with green ribbon and there is a red stamp of the Master in Equity of the Supreme Court. ‘In the Supreme Court of Victoria in the Probate Jurisdiction in the Will of Harold Dawkins, late of Warrnambool, in the Colony of Victoria, carpenter, deceased – Probate. I certify that no duty is payable on the within probate. J. Poole, Officer under section 96 Act 1060, 7/4/98, E.J.W. Chambers, Proctor, Warrnambool’harold dawkins, ernest chambers, warrnambool, tait collection

Context: A brace is a hand tool used with a bit (drill bit or auger) to drill holes, usually in wood. The pressure is applied to the top and the tool is rotated with a U-shaped grip. Bits used to come in a variety of types but today the more commonly used Ridgeway and Irwin pattern bits also rely on a snail point (called the snail), which is a tapered screw point shaped the same as a wood screw thread, which helps to pull the bit into the wood as the user turns the brace handle and applies pressure. The designs used today come from an original idea and pattern invented by John S Fray. Company History: John S. Fray (1833 ) immigrated to Bridgeport Connecticut USA from England in the 1850s and established a working relationship with Nelson Spofford, who held an 1858 patent for a bit brace (the tool could be augured in a continuous circular motion by hand). He established the John S. Fray Co. around the same time and immediately began producing the Spofford bit brace. Fray himself held at least two patents: one awarded in 1869 for a boring brace attachment, and another awarded in 1883 for a tool handle. By 1889, the firm was located at the industrial complex that sits between the former International Silver Company and the former Bridgeport Chain Company on Crescent Avenue and is identified on the Sanborn Insurance Atlas as a manufacturer of Spofford bit braces, hollow handle awl, and toolsets. The company was in competition with Peck Stow and Wilcox Co. of Southington, and in 1898 was enjoined from making a ratchet bit brace for which the latter company held a patent. By the 1920s, the factory had been purchased by the Stanley Company of New Britain and leased to the American Tube and Stamping Company, a manufacturer of brass, copper, seamless, and bicycle tubing, which also ran a rolling mill to the south on Stafford Avenue (now demolished). The Stanley Company bought both mills in 1926, perhaps as a strategic move to be located along the Bridgeport Harbour, through which much of the raw material used in its operations throughout the state came. By the 1950s, the Crescent Avenue operations had been moved to other sites in Connecticut, and Stanley again leased the building to a company called Cornwall and Patterson, a manufacturer of piano hardware. Today the building appears to be vacant. An early carpenters tool made by a well known early manufacturer from America who instigated many innovations to the making of tools. His early pattern for the improvement of a tool that could be used for the boring of holes in wood was a significant step forward. His design for a boring brace attachment and later a specific handle is still in use today and his original brace and bit is now sought after by collectors of antique tools. Spofford Carpenter's Bit Brace metal has bit attached. Wing nut holds bit in place but nut missing. holds bit in place. 285mm long x 160mm Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

SS Bogong built Williamstown 1878, wrecked on return to Lakes Entrance September 1896Black and white photograph showing SS Bogong moored at New Works Wharf, shows John Carpenters twin gabled house on foreshore at rear of boat. Lakes Entrance Victoriaboats and boating, tourism, jetties, accommodation