The Medallions and the Magazine are dedicated to National Service and National Servicemen who served during the period 1951-1972. The Memorial for National Service is located at the Australian War Memorial, Canberra.The items are the original that were raised to acknowledge National Service and National Servicemen, 1951-1972.1 x round Medallion on a wood base in a lined cardboard case 2 x round Medallion in a lined black case 1 x magazine 'Australian War Memorial, National Service MemorialThe large medallion has a carving of the Memorial that is at the Australian War Memorial, around the medallion 'Dedicated to all Australian National Servicemen and in Memory of those who died. Thh two smaller medallions has the tri service logo in the centre and round the outside of the medallion is Anniversary of National Service 1951-1972. The Magazine 20 page history of National Service in Australia and the history of the National Service Memorial Dedicated 8 September 2010.awm, national service, magazine, medallions

The photograph shows an old car rounding a bend on what is now the Mt Dandenong Tourist Road. Around 1930 it would have been called the CRB Road or the Main Road. The photograph is in the Ivy Child Album. Ivy May Child (1910 – 1989) was the daughter of Arthur Edward (Ted) Child (1878 – 1964) and Ethel May Madden (1888 – 1970). Ted Child was the son of Matthew Francis Child (1839 – 1933) and Martha Jeeves (1857 – 1926). He was the grandson of one of the early pioneers Francis Child. Ivy grew up on the family property on Childs Road and took many photographs. Most of these are glued into her photo album. The album covered the years from c1927 – 1932. Ivy married Henry William Burgess (1906 – 1968) in 1944.Sepia coloured photograph showing an old car rounding a bend in the road.Below photograph in album: The Main Mountain Highwaymain road, crb road mt dandenong tourist road, car, automobile, ivy child, kalorama

This marking gauge has a round head. It is a hand-powered tool and is used to measure and mark a scribed line onto the surface of the wood for the purpose of cutting or aligning. It would have been used by a tradesperson such as a cabinet maker, wood worker or carpenter. The hand tool shows signs of much use. It appears to be appreciated as a tool due to the initials carved into the side of the block. The marking gauge is an example of a hand powered woodworking tool used over the past few centuriesMarking gauge: wooden staff with half-round block secured by a wedge. there is a metal marker on one end. Inscription "WS" crudely engraved in end of block.Carved "W.S."flagstaff hill, warrnambool, maritime museum, maritime village, shipwreck coast, hand tool, woodwork, marking gauge, w.s., measuring tool

A tea strainer is a type of strainer that is placed over or in a teacup to catch tea leaves. When tea is brewed in the traditional manner in a teapot, the tea leaves are not contained in teabags, but rather are freely suspended in the water. As the leaves themselves may be distasteful, it is usual to filter them out with a tea strainer. Strainers usually fit into the top of the cup to catch the leaves as the tea is poured. Some deeper tea strainers can also be used to brew single cups of tea, much as teabags or brewing baskets are used - the strainer full of leaves is set in a cup to brew the tea, and then removed, along with the spent tea leaves, when the tea is ready to drink. By using a tea strainer in this way, the same leaves can be used to brew multiple cups. Tea strainer use declined in the 20th century with mass production of the tea bag, but is still preferred among connoisseurs who claim that keeping the leaves packed in a bag, rather than freely circulating, inhibits diffusion. Many assert that inferior ingredients, namely dust quality tea, are often used in tea bags. Tea strainers are usually either sterling silver, stainless steel, or china. Strainers often come in a set, with the strainer part and a small saucer for it to sit in between cups. Tea strainers in themselves have often been turned into artistic masterpieces of the silver- and goldsmith's craft, as well as rarer specimens of fine porcelain. Brewing baskets (or infusing baskets) resemble tea strainers, but are more typically put in the top of a teapot to contain the tea leaves during brewing. There is no definitive boundary between a brewing basket and a tea strainer, and the same tool might be used for both purposes. Tea strainers are also used by patients trying to pass a kidney stone. The patient urinates through the strainer, thereby ensuring that, if a stone is passed, it will be caught for evaluation and diagnosis. Source: www.wikipedia.net This item has historical significance in the evolution of Tea drinking.The Strainer being needed if a cup of tea was to be poured without tea leaves being present in the tea liquid.As Tea bags have been introduced into everyday life tea strainers are an item of the past. This particular tea strainer was an item for everyday useage.White enamel tea strainer, round in shape with flange edges, 7 small circle areas of perforations in the concave area of the utensil, a small perforated handle (same material) at one outer area of the item.domestic, kitchen, food, preparation, white, enamel, tea, strainer, beverage, perforated, utensil, round, flanges, leaves

Colour slides of children on a merry-go-round ride at Government House. Melbourne Legacy held an annual Christmas Party for Junior Legatees and Widows at Government House for many years. The year is unknown but likely to be during the 1950s. A group of slides in glass mounts with green tape are probably from a couple of consecutive years. They will be catalogued separately. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of a Legacy Christmas party held at Government House.Colour slides x 2 of a merry-go-round at Government House, in a glass mount with green tape.christmas party, government house party, carousel

Her role as a pilot cutter was to sail with pilots on board to meet ships entering Port Phillip Bay. Pilots would be transferred by the Wyuna's workboat to the vessel requiring pilotage while it was stopped dead in the water, with shelter provided by the vessel itself. In the early 1970s the pilot service started using fast launches to allow pilots to board while ships were still underway, and in 1979 the Wyuna was sold to the Australian Maritime College in Launceston, Tasmania as a training vessel. Wyuna served in Port Phillip as a pilot tender Significant vessel served in Port Phillip Pilot ServiceSilverware from Pilot Boat Wyuna: Salt & Pepper Pots [6] - 5 with blue glass inserts, Small spoons [3], Gravy boats [1], nutcracker [1], Plate cover [1]T.S.M.V. WYUNA on pots and gravy boats and oval spoon, P.P.P.S. on two round spoons. Makers mark on round spoonswyuna, pilots, silverware

A marlinspike is a tool used in marine rope work it is shaped in the form of a polished metal cone tapered to a rounded or flattened point, it is used in such tasks as unlaying rope for splicing or untying knots. For drawing a marline tight and using a marlinspike hitch as well as for joining toggle ropes under tension in a belaying pin splice. Most marlin spikes are 15–30 cm long, but may reach 61 cm and more for working heavy cables and ropes. They are usually made from iron or steel, whereas fids, similar in shape and function, are formed from wood or bone. The marlinspike may be a separate tool or as an item on a pocket knife. Sailors who become proficient at knot tying, splicing, and sewing using the marlinspike are said to have mastered marlinespike seamanship, earning them the right to be known as marlin spikes or marlinspike seamen.A tool still very much in use today wherever a rope or cable requires joining, splicing etc the marlin spike tool design has not changed since first invented centuries ago as a sailors tool to splice and make repairs to ropes and cables on board a ship. This item gives a snapshot into the life sailors have on board sailing vessels past and present. Marlin Spike made of solid steel. Handle is bulbous and spike end is rounded.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlin spike

Arthur E. Woodley donated the WW1 Military Carbide Signal and General Purpose Lamp to Frankston RSL. It was given to Arthur E. Woodley of Crib Point during the 1960s by Captain Ivan E. Layton MBE who was then the Executive Officer of Melbourne Legacy. During WW2 Ivan Layton was secretary to General Blamey. Ivan Layton died on 15th September, 1979. The carbide workings of the lamp were removed because of corrosion, otherwise it is almost complete.WW1 Military Carbide Signal and General Purpose Lamp which is round and made of brass. The lamp has a latched and hinged brass top. Brass and wood hinged handle with knurled access knob which is situated at the top of the lamp. In between the handle uprights is a round chimney flu which allows heat to escape. Approximately one third down from the top of the lamp there is a brass side handle. Immediately to the left of the handle is a rectangular curved view port with brass cover. Directly opposite the side handle is a convex glass window. Air vents are located at the bottom of the lamp. Inside the top half of the lamp is a chamber which contains the carbide lamp and perpendicular sleeves for the insertion of coloured glass panels. The bottom half of the lamp contains the carbide.Manufacturers Stamp, 'PLAYER & MITCHELL LTD', 'SENTINEL WORKS' 'BIRMINGHAM'ww1, military, brass, lamp, world war 1, round, great war, carbide, signal lamp, player mitchell, birmingham

This image attributed to Walter Withers (1854-1914) of a rural scene was printed mirror imaged in Alan Marshall's "Pioneers and Painters: one hundred years of Eltham and it's Shire" (1971) on page 101: Chapter 17 "Educationalists and Writers". This and other Withers pencil drawings came from his sketch book held by the National Gallery of Victoria.Photograph of black and white pencil drawing 101 Deep etch all round image walter withers, pencil drawing

52 hand carved wooden horses. Auctioned 1973 and sold $40,000 restored 13-03-1974.black and white photograph, unmounted copy held SKHSWeniger's Merry-Go-Round, 1915-16

A photo of the Tyne Cot Cemetery in Passchendale dated September 24, 1930. It appears to be a professional photograph purchased as a souvenir. See also 01024 Menin Gate, Ypres, as it is by the same manufacturer. The Tyne Cot Commonwealth War Graves Cemetery and Memorial to the Missing is a Commonwealth War Graves Commission (CWGC) burial ground for the dead of the First World War in the Ypres Salient on the Western Front (source Wikipedia). The hand written inscription on the back of the photo says: "This memorial in Cemetery was built over a German dugout. 12,000 men are buried here. Stone wall at back has soldiers names engraved on same. Those unknown - words in stone 'Australian Soldier of the Great War Known unto God.' Australians captured Passchendale from the Germans Oct 4th 1917. Beautiful cemetery, all well kept, gardens, lawns, flowers. Ypres, Belgium Sept 24/30" The source of these photos is not known but they were stored together in the archives. The founders of Legacy were returned servicemen from the first world war and may have returned to France in the 1930s. Manufactured by L. Duhameeuw, Ypres.The professional photos from France imply that Legatees were making pilgrimages to the battlefields of France in the 1930s in memory of their comrades.Black and white photo of Tyne Cot Cemetery, Passchendale, France.Indistinct round stamp on the back and a handwritten message.world war one, souvenir, cemetery, memorial

Official guide to 100th Australian Amateur Championship, Melbourne 17-23 April 2005. Played at Woodlands Golf Club (Mordialloc) and Royal Melbourne Golf Club (Black Rock). Bruce Harding was a member of the Committee of the Victorian Golf Association during this competition.Bruce Harding is a past HGC President and was involved with Victoria's junior teams, and as a rules official and referee.28p., illus. (some col.). Handwritten draw for each round written in booklet.bruce harding, australian amateur championships

Colour slide of a children at a Merry Go Round ride at Government House in 1960. Melbourne Legacy held an annual Christmas Party for Junior Legatees and Widows at Government House for many years. Junior Legatees were given gifts. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of a Legacy Christmas party held at Government House.Colour slide of children waiting for a Merry-Go-Round ride a Legacy Christmas Party at Government House, in a cardboard Kodak mount with red printing.Handwritten 'Customers for the MGR Govt House Party 1960' in blue ink and '19' in pencil.christmas party, government house party, carousel

These badges were issued to female relatives of a person serving overseas during WW1 and WW2,The badges are originals as issued during WW1 and WW2One Badge is oval shape, blue and silver colour finish. One badge is round shape with a silver colour finish.The first oval shape badge was issued to nearest female relative of those on active service overseas, during WW1. Issued to by Dept of Defence to Women of Australia, For Duty Done - 22589 - 9455 The second round badge was issued to female relatives was issued to the female relatives, nearest has been dropped, issued in WW2.A206433 -[ Issued by Cowth Govt.female relatives badges, ww1, ww2

The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Small round lantern replacement glass called "Feuerhand" Superbaby Model. Design No 58162.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lamp glass replacement, glass, hurricane lamp, feuerhand lantern, jena glass works

The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Small round lantern replacement glass called "Feuerhand" Superbaby Model. Design No 58162.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lamp glass replacement, glass, hurricane lamp, feuerhand lantern, jena glass works

This badge represents a period in time when a School Carnival was not only a major School activity but also had a community "spirit" attached to it. It represents the balance between the metal (learning) and the physical (body) development of the student body. This balance of the growing student has been in existence for centuries. Although some students excel in the academic side of schooling others balance this through the sporting/physical side of "school life" This balance is mirrored in the overall Australian society. From the late 1990's the highly lucrative "professional" sports have provided a highly monetary incentive for those excelling in the physical side of society.The Mount Beauty High School has not only provided outstanding academics but also sports professionals. It has and is still producing a cross section of outstanding Australian men and women. Although the local environment (rural) has limited opportunities for further scholastical and professional sporting achievements it is a vital facility in the student's development for the ever changing Australian society. This yellow coloured, round "lapel" badge is made from mild steel (tin). It has a safety pin shaped around a hole and running horizontal it can be pressed into a "U" shaped hole for fastening onto any material (blazer or shirt).On the front of the badge (in smaller green coloured print) and following the round shape of the badge is "MOUNT BEAUTY HIGH SCHOOL". In the middle portion of the badge, and in larger print "CARNIVAL". Below this in smaller print again is "21st MARCH 1970"high school education, metal school badges, school sports

Colour slide of a merry-go-round ride and crowd of people at Government House. Melbourne Legacy held an annual Christmas Party for Junior Legatees and Widows at Government House for many years. The year is unknown but likely to be during the 1950s. A group of slides in glass mounts with green tape are probably from a couple of consecutive years. They will be catalogued separately. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of a Legacy Christmas party held at Government House.Colour slide of a crowd and a merry-go-round fun ride at a Legacy Christmas Party at Government House, in a glass mount with green tape.christmas party, government house party, carousel

This medical bureau / cabinet shows several signs of being used for a different purpose before being a medical bureau. It once had the words "GENUINE PURE QUALITY" lettered across the top of the front, as can been still seen from the impression left behind in the stained timber. On each drawer above the handle is a faint impression of something long and rectangular, as though there had been a label attached. The front panel of the drawers is made of the same wood as the rest of the outer cabinet, most probably blackwood. The handles on the drawers are not the original handles either. There are 3 filled-in holes that would form the corners of a triangle, apex at the top, around the perimeter of the current handles. The sides of the drawers are made from plywood and the base made from alternating lengthwise strips of oak and beech wood pressed together, rounded corners at the back and joined to the front panel with metal brackets. The backs of the base of the drawers have four round impressions in them. Along the back edge of the base, in the centre, is a rectangular hole. Between the front pair of round holes is a faint black rounded marking, like the impression made by rubber. The cabinet may have once been a filing cabinet, with the drawers used as document drawers, each with a spring-loaded clamp attached to the back of them to secure documents within. The original handles could have been the half-cup type used for filing cabinets. The construction and use of plywood could place this cabinet in about 1950's.Chest of drawers (or Medical Bureau, or Apothecary Chest, or Filing Cabinet) wooden, dark stained, with 30 small drawers (10 rows, 3 columns). The outer wood of cabinet is possibly blackwood and the edges of top and sides have carved wood decoration. Drawer fronts have bevelled edges and round silver-coloured metal knobs. Drawers have plywood sides, and oak and beech wood bases/, Each drawer has four round depressions (in a square-shaped arrangement) at the back plus a small rectangular hole cut in the centre back of base. A faint impression from previous lettering is evident in the wood stain across top front of cabinet.Impression of previous lettering across top front of cabinet "GENUINE PURE QUALITY". flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, drawers, bureau, cabinet, chest of drawers, furniture, bedroom furniture, household storage, medical bureau, apothecary cabinet, document drawers, filing cabinet

Written under the Photograph. 'Mick's Father'Copy of B/W Photograph showing a Man Standing next to four (4) Horses in harness'36' on a round white sticker on lower left cornerfarming

Copy of a B/W Photograph showing bullocks towing a header in a field with two men standing behind it'34' on a round white sticker on a loewr left cornerfarming

This object relates to Oliver Charles MURPHY. He was born on 1/01/1879 in Lexton, VIC. Oliver Charles served in the Army (6047) enlisting on, 20/03/1916 in Swan Hill, VIC before being discharged from duties with the 5 BATTALION as a Army Non-Commissioned Corporal / Bombardier (CPL/LBDR) on 23/06/1919. Oliver Charles MURPHY was not a prisoner of war. His next of kin is Mrs Sarah Ann MURPHY - Wife.Three tags of leather attached via a light brown cotton tape. Two tags are hexagonal in shape with two holes punched in opposite sides; the third tag is round with two holes punched at 12 o’clock and 6 o’clock. The tags are embossed/branded with text.Round tag: “O C MURPHY (on outer)/5/BATT/6047/A I/ C E” Hexangonal tag: “MURPHY OC/ PTE/6047/C E/5 AIF” Hexagonal tag: “6047/5/ OC MURPHY”first world war (ww1), 1914 - 1918, uniforms, ballarat rsl, ballarat

Run Number pressed metal plate with corners trimmed and rounded, top section with two slotted holes, painted with a white background and the letter "A" and number "38" painted in red, to give a Run Number Plate for South Melbourne Depot. Painted with the same detail on either side of the plate.Used by South Melbourne Depot until they were phased out and replaced with the Automatic Vehicle Monitoring system c1990. Used to identify the depot and "run number" or timetable that the tram was running on, two in each tram, to enable monitoring by inspectors and crews.Run Number pressed metal plate with corners trimmed and rounded, top section with two slotted holes, painted with a white background and the letter "A" and number "38" painted in red, to give a Run Number Plate for South Melbourne Depot. Painted with the same detail on either side of the plate.tramways, trams, signs, south melbourne, south melbourne depot, run number plates, timetables

Black coloured card with various items attached. Displayed are several rounds used in various weapons, a splintex arrow and a lighter.5.56 - M 16 round armalite rifle - AK47 - 7.62 short 7.62 x 59 nugent armoured piercing ;splintex arrow (part of a cannister round ).50 cal machine gun round; 7.62 Nato round with M 60 machine gun link. Donated by John Spitzers. Ex I BN RAR SVN 1965 /66ammunition

Australian rules football began being played on a regular basis in Cheltenham in 1890. Teams would not only play locally but travel by train fairly long distances, such as to Ballarat, for the day, play a game, turn around and come home. The Cheltenham home games were played on a paddock on the corner of Park and Charman roads in Cheltenham. In 1907 the Cheltenham progress committee made an application to the board of land works for land in Weatherall Road for recreational service to the public. That application was received and granted, then developed where Cheltenham Recreational Reserve now stands. The ground was opened in 1909 and the first Cheltenham side entered in the newly formed Federal Football League along with seven other foundation members, Mordialloc, Mentone, Moorabbin, Frankston, Glenhuntly, Elsternwick, and Ellindale. The grand final for that year, 1909 was a hard encounter between Cheltenham and Ellindale with Cheltenham coming out victors, thus becoming the inaugural Federal Football League premiers. The Federal Football League (FFL), also known simply as the Federal League, was an Australian rules football competition in the south-eastern suburbs of Melbourne, Victoria. The competition was in existence from 1909 to 1981 and was regarded as one of the strongest metropolitan leagues in Melbourne.Black and white image of the players and officials of the Cheltenham Football Club. Back (left to right) G Puttick, Franklyn (sic), Unkown, Unknown, C Corstorphine, D Arland, Dave Hughes, H Bryant, Centre: T Elliott, S Parsons, F Judd, H Foreman, N Corstorphine, J McCormack, S Chandler, H Orr. Front: H Clayton - no other names recorded. The players are wearing what appears to be a range of club jumpers, with some in street wear. Some players seated in the front row have mud visible on the soles of their shoes, indicating they may have already played a gam. The ball on the ground in front of the group is round.Round red sticker on reverse with handwritten text: X10 Handwritten in blue ink: A11, with a circle around it Handwritten in red ink: 50%sport, football, cheltenham, teams, federal football league