Matilda was a Merino ewe who went missing for over 5 years on cattle country just outside of Hamilton. When she was found she had over 30 kgs of fleece that needed to be shorn. She was shorn in Melbourne's Federation Square in 2005. Her fleece was then processed into fabric by CSIRO. The fleece made enough fabric for six jackets. The jackets were auctioned at Crown Palladium Ballroom in March of that year. The winners had their jacket tailored to their measurements by Blazzer. All profits from the auction went to Celebration of Life, a fund established to support Victoria's Royal Children’s Hospital neonatal unitFour samples of wool in the different stages of process. The first two are of the raw fleece from the sheep, the second has been washed and combed, the third a fabric sample created from the wool.wool, sheep, merino wool, missing sheep, maltilda, fleece, csiro

Jackie Kerin's (donor's) story. In 1973, I was in my late teens and while I’d moved to Sydney from Melbourne, to begin my first year of drama studies at the National Institute of Dramatic Art. My parents had moved to Lake Bunga, a few kilometers north of Lakes Entrance (Victoria). On my first holiday visit to Bunga, I called into the Jolly Jumbuck Country Craft Centre in Bairnsdale http://jumbukwool.com.au/history. I was entranced by the place and spent the following weeks learning to spin lumpy wool on an Ashford Wheel. By the end of the holidays, I had my own Ashford and it travelled with me back to Sydney. After graduation, I returned to Melbourne and the hippy “back to nature” movement was in full swing; there were many shops and galleries selling handmade woollen items and pottery etc. So I found an outlet for my pieces. Sometime in 1976-77, I met a spinner and weaver of Swiss origin (I think) – her name was Ingeborg Guber (not sure of the spelling). She had a small gallery/shop at Brighton Beach where she worked, with her pet duck for company. Ingeborg had an upright Philip Elford wheel; an Australian wheel crafted from Acacia melanoxylon (blackwood). I was smitten and ordered one. I have a memory of Philip driving to Hampton from Ballarat to make the delivery. I used this wheel for years but as time and enthusiasm for spinning waned, the wheel became a decorative item in the house. Then in the 90s, and with my drama training, I set myself up travelling to schools and festivals, museums and galleries as a storyteller. The spinning wheel had a new life accompanying me on my adventures. For many children, familiar with references to spinning in fairy tales, seeing the little Philip Elford upright was magical. The wheel was donated to the National Wool Museum in 2021.Vertical tripod leg spinning wheel. 6 spoke wheel with three bobbins. Inscription “Philip Elford Ballart” can be read in gold text stamped to the base of the wheel. Wording, stamped, gold. Philip / Elford / Ballartspinning wheel, textile production, hobby textiles, aciacia melanoxylon (blackwood)

This jacket is by the prolific spinner and weaver Jean Inglis. It has been woven with a warp of commercially brought wool & a weft of hand spun Corriedale. It is completed in a Swedish lace style of weaving. The highlight of the jacket is the blue section of fabric on the top left shoulder of the wearer, which works down to the bottom right hip. This pattern looks like long thin individual separate sections of fabric stitched to the jacket; however, only one section of fabric has been added. A dying technique has been utilised to give the appearance of multiple sections. This Japanese dyeing technique is called Shibori, “to wring, squeeze or press". It is a manual tie-dyeing technique, which produces several different patterns on fabric. The specific pattern on this fabric is known as Kumo Shibori. It utilises bound resistance. This technique involves folding sections of the cloth very finely and evenly. Then the cloth is bound in very close sections. The result is a very specific spider-like design. This design requires very precise technique. Specific to this jacket, the fabric for the dyed section was made with the same fabric as the rest of the jacket. A section of the excess fabric was concertina wrapped around a 100mm pipe and tied up before dying. This gives the consistent straight blue lines, with no bleed from the dye. The sections were then sewed into the jacket with the occasional sequin added for additional decoration and glamour. The jacket won 1st prize at the 1988 Geelong Show. Jean was assisted by the dress maker Ruth Randell with some of the design and sewing. Jean always found sewing “a bit of a bore”. The jacket also has an attached swing tag. It was added to provide information to the judges at the Melbourne Show on how the jacket was created. It comes complete with Jean’s self-proclaimed terrible handwriting. It was donated to the National Wool Museum in 2021.Cream singled breasted jacket with no overlap. The jacket has no column of buttons for fastening, or lapels. It is designed to be plain, to not draw attention. The jacket is highlighted by the Shibori dyed waves on the top left shoulder of the wearer, which works down to the bottom right hip. This blue dyed section of fabric is dotted with the occasional blue sequin. Internally, the jacket features a white silk lining for comfort. The jacket ends in a straight cut hem, including at the cuffs. The jacket has an attached swing tag. The swing tag is cream with a printed thin black boarder. Within the boarder, handwriting in black ink is found. It has a hole punch in the top left corner of the swing tag for attaching to the jacket.hand spun, hand weaving, textile design, textile production, shibori, kumo shibori

This Remington No.12 typewriter is of the typebar, front-strike class. It was made by the Remington Typewriter Company of Ilion, New York, U.S.A. in about 1925. The Model No. 12 was introduced in 1922 and was one of the first 'visible writer' machines, in which the typed characters were visible to the operator. Previous models were of the upstrike class in which the characters were typed on the underside of the platen. To see what had been typed the operator had to raise the platen, meaning the typist was typing blind much of the time. This machine was used by Margaret Ganly née Burn in the 1930s. It was purchased for her by one of the sons of William Pride, a famous saddle maker in Geelong, William was Margaret’s grandfather. The typewriter was donated with original sales receipt and servicing tools. Margaret worked at Dennys for 7 years during the 1930s. The typewriter is accompanied with a story written by Margaret about her time working at the company. Margret married Jack Ganly, a fellow employee of Dennys. The Ganly name was well known within Dennys, with three generations of the Ganly family working at the company. WORKING CONDITIONS & OFFICE WORK DUTIES. Written by Margaret Burn in 2021. Worked at Dennys Lascelles in the 1930s. In the 1930s coming out of the Depression, jobs were hard to come by and had to be clung to by efficiency and subserviency. There was no union to protect workers – bosses could be tough and rough. Dennys Lascelles revolved around fortnightly wool sales in the “season” – September to May. Sale day was always a day of suppressed excitement. Preparation from a clerical point of view was complete and we now awaited the aftermath of the actual wool auction. The building teemed with people. There were country people down to see their wool sold, buyers of many nationalities, or from the big cities, who were coming in and out of the building all day. Their role was to inspect the acres of wool bales displayed on the show floors; however, caterers were present to feed clients, and there was plenty of social interactions on top of business. The office staff did not go home but waited until the first figures came back from the wool sales and the machines went in to action, both human and mechanical, preparing the invoices for the buyers’ firms. This comprised of lists of lot numbers, weights, prices per lb., and the total prices paid. A lot of this was done by old-school typewriters, making this work a big, heavy, tiring job. Before the finished lists could be dispatched, they were collated on an “abstract”. The lists had to balance with the catalogue from which the invoices had been prepared. This never happened automatically. All the paperwork had to be split up amongst pairs of workers and checked until discrepancies were found. This would happen until midnight but occasionally went until 2 or 3 am. Once complete, the invoices could then be rushed off to the buyers’ firms usually in Melbourne, and hire cars took the staff home. It was back on the job the next morning, usually around 8.30. The office hours varied according to the size of the sale and work involved. Some days started as early as 8 and could finish around 5.30. The second phase of work began with the account sales to be prepared for the sellers of the wool. These detailed all the weights, descriptions of wool, brands, and prices. One Sales account could have multitudes of lot numbers, all needing to be individually described. Various charges needed to be deducted such as finance for woolpacks, extra stock, or farmers who were given a loan to live on during the season. Details of how payment was to be made was also noted, whether the seller was to be paid by cheque, to a bank, or credited to their account with the company (which often left the seller still in debt). For a couple of months in the winter, things were quieter when staff took holidays and were sometimes given afternoons off. But there were still weekly skin sales and stock sales around the state. The annual end of June figures to be prepared for a big company like Dennys with branches all around the state also kept the staff busy. In good years there was sometimes a bonus. On sale days there was a bar open for the clients and wool buyers. This added to the excitement for the young girls, who were strictly barred from using it, but somehow managed to sneak a gin and tonic. This is how I had my first ever, before the evening meal. There was also the romantic notion in some minds, with all the influx of males, that some of us might end up on a wealthy station, or be noticed by an exotic buyer. To my knowledge, this never happened at Dennys Lascelles Limited. Group staff photo at Dennys Lascelles Limited. Margaret Burn. Age 18 or 19. Jack Ganly (Margaret’s future husband). 22.The typewriter has a black painted metal frame. The top section of the typewriter consists of a cylindrical platen on a carriage featuring plated metal fittings. A curved folding paper guide sits behind the platen and moves on the horizontal axis when the user types on the keyboard. A horizontal semicircular type basket with typebar links the top section to the lower keyboard. The ink ribbon is carried between two spools on a horizontal axis, one on each side of the type-basket. At the rear, a paper tray features gold lettering which reads ‘Remington’. At the front, a four-row QWERTY keyboard is found with 42-character keys total. 'SHIFT LOCK' and 'SHIFT KEY' are to the left of the keyboard, 'BACK SPACER' and 'SHIFT KEY' to the right. All keys are circular, white with black lettering. At the top of the keyboard are five circular red keys with the numbers 1-5 displayed behind their respective keys. A Spacebar is found along the front of the keyboard. The typewriter is accompanied by a cardboard box. This box contains the original sales receipt, on blue paper with grey lead handwriting. It also contains spare parts, a spare ribbon stretched between two spools, and cleaning tools such as brushes of differing sizes. Serial Number. Engraved. "LX45395" Gold lettering. Paper tray. “Remington” Gold Lettering. Behind keyboard. “Made in Ilion, New York, U.S.A. Gold Lettering. Mirrored both sides of type-basket. “12”remington, dennys lascelles ltd, worker conditions 1930s

Letter of Reference for Miss Margaret Burn detailing her work as a bookkeeper, machine operator, typist, and stenographer over seven years at Dennys Lascelles Limited. The letter details her leaving the company as she married in 1939. In the same year, Ms Burn returned to the office owing to the shortage of staff caused by various employees being called away for Military Training. Included in the staff called away for military training was her newlywed husband, Mr Jack Ganly. A fellow employee of Dennys, the Ganly name was well known within the company, with three generations of the Ganly family working at Dennys. Margaret worked at Dennys for 7 years during the 1930s. The Letter of Reference is accompanied with a story written by Margaret about her time working at the company. WORKING CONDITIONS & OFFICE WORK DUTIES. Written by Margaret Burn in 2021. Worked at Dennys Lascelles in the 1930s. In the 1930s coming out of the Depression, jobs were hard to come by and had to be clung to by efficiency and subserviency. There was no union to protect workers – bosses could be tough and rough. Dennys Lascelles revolved around fortnightly wool sales in the “season” – September to May. Sale day was always a day of suppressed excitement. Preparation from a clerical point of view was complete and we now awaited the aftermath of the actual wool auction. The building teemed with people. There were country people down to see their wool sold, buyers of many nationalities, or from the big cities, who were coming in and out of the building all day. Their role was to inspect the acres of wool bales displayed on the show floors; however, caterers were present to feed clients, and there was plenty of social interactions on top of business. The office staff did not go home but waited until the first figures came back from the wool sales and the machines went in to action, both human and mechanical, preparing the invoices for the buyers’ firms. This comprised of lists of lot numbers, weights, prices per lb., and the total prices paid. A lot of this was done by old-school typewriters, making this work a big, heavy, tiring job. Before the finished lists could be dispatched, they were collated on an “abstract”. The lists had to balance with the catalogue from which the invoices had been prepared. This never happened automatically. All the paperwork had to be split up amongst pairs of workers and checked until discrepancies were found. This would happen until midnight but occasionally went until 2 or 3 am. Once complete, the invoices could then be rushed off to the buyers’ firms usually in Melbourne, and hire cars took the staff home. It was back on the job the next morning, usually around 8.30. The office hours varied according to the size of the sale and work involved. Some days started as early as 8 and could finish around 5.30. The second phase of work began with the account sales to be prepared for the sellers of the wool. These detailed all the weights, descriptions of wool, brands, and prices. One Sales account could have multitudes of lot numbers, all needing to be individually described. Various charges needed to be deducted such as finance for woolpacks, extra stock, or farmers who were given a loan to live on during the season. Details of how payment was to be made was also noted, whether the seller was to be paid by cheque, to a bank, or credited to their account with the company (which often left the seller still in debt). For a couple of months in the winter, things were quieter when staff took holidays and were sometimes given afternoons off. But there were still weekly skin sales and stock sales around the state. The annual end of June figures to be prepared for a big company like Dennys with branches all around the state also kept the staff busy. In good years there was sometimes a bonus. On sale days there was a bar open for the clients and wool buyers. This added to the excitement for the young girls, who were strictly barred from using it, but somehow managed to sneak a gin and tonic. This is how I had my first ever, before the evening meal. There was also the romantic notion in some minds, with all the influx of males, that some of us might end up on a wealthy station, or be noticed by an exotic buyer. To my knowledge, this never happened at Dennys Lascelles Limited. Group staff photo at Dennys Lascelles Limited. Margaret Burn. Age 18 or 19. Jack Ganly (Margaret’s future husband). 22. Sheet of paper shorter in length than A4 size, creamed with age. Paper has a header for Dennys, Lascelles Limited’s Head Office at 32 Moorabool Street, Geelong. Body of paper is made up of 3 paragraphs in a typewritten message of black ink with subheadings highlighted with a red underline. The text is finished with a signature at the bottom of the paper. Paper is accompanied by its original envelope. Envelope has typewritten text in black ink with a red underline located at the centre. It also has return to sender instructions to Dennys, Lascelles Limited in the lower left-hand corner.Typewritten text, black and red ink. Multiple. See multimediadennys lascelles ltd, worker conditions 1930s, letter of reference

Cooper S.E. Ball Bearing Grinder made and guaranteed by Sunbeam Corporation Limited. Grinders like this example have been made the same since the early 1900s, with this grinder thought to have been produced in the 1960s. It is belt driven, with the other end of the belt being attached to an engine; the same engine that would have powered the overhead shearing equipment in shearing sheds. It was common for shearing teams to bring their own equipment, especially pre-1960 as most shearing sheds were not connected to power, and shearers preferred to work with their own equipment. The engines that powered the shears and grinder were typically fuelled with kerosene or petrol. The large circular disks are attached to the bolt that protrudes from the grinder and fastened tightly with a nut. An example of seeing a similar grinder in action can be found on the following link - https://www.youtube.com/watch?v=O7eimI_Gm9o. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. The grinder is formed from a central arch shaped block of green painted metal. Much of this paint has been lost to age, leaving the grinder in a ‘farm used’ condition with much surface oxidation present. On the front of the arch is a specification plate, reading “Cooper S.E. ball bearing grinder. Made and guaranteed by Sunbeam”. At the foot of the arch, three bolt holes are found for securing the grinder to the base of a solid wooden surface. Two of the bolt holes are found on the front of the grinder, with another found on the rear. From the central arch, a bolt protrudes to the right of the grinder. This large bolt is for securing a grinding plate to the grinder. Above the central arch is a pendulum which holds the comb / cutter that is being sharpened. From the pendulum, a large arm extends down (not pictured) to meet and strike the plate spinning at a rapid speed. On the left-hand side of the central arch of the grinder, a wheel is found which a belt is attached to for power. This belt is then attached to a separate engine, spinning the wheel and hence powering the grinder. The wheel is partially covered with a section of protective bent tube, designed to provide protection from the rapidly spinning wheel. Below this wheel is the belt shifter. It is designed to move the protective bent tube from one side of the grinder to the other, to accommodate the grinder in the setup of different shearing sheds. The two separate grinding plates are identical. They have a slight slope for sharpening the comb and cutters in the correct method, with a slight bias towards the base, or “tooth”, of the equipment. The disks have a large central bolt for attaching to the grinder. They have tags on the horizontal axis of the grinding plates, for securing the plates in transportation, and to help with initial alignment when setting up the grinder. The reverse of these grinding plates has the same green painted metal finish found on the grinder. This paint is also in a ‘farm used’ condition, with surface oxidation present. The grinder would be provided from the factory with a comb holder, shifter for securing the grinding plates, emery cloth and emery glue. The emery cloth is what does the actual grinding and is applied to the grinding disks, replacing once well worn. These items can be seen in the final images in the multimedia section, showcasing advertising for this grinder. Plate. Inscribed. “Cooper / S.E. BALL BEARING GRINDER / MADE AND GUARANTEED BY / Sunbeam / CORPORATION LIMITED / SYDNEY MELBOURNE / ADELAIDE BRISBANE ”sheep shearing, shearing equipment, sunbeam, grinder

This set of two posters were displayed in the sale rooms for wool, skin, hides, and tallow at the Wool Exchange in Melbourne, on the corner of King and Little Collins Street. The posters were found in the storeroom under the white sale room in the late 1970s, when the Melbourne Woolbrokers Association moved around the corner to 530 Little Collins Street. The first poster is dated 21st of September 1914. It predates the second poster which replaced it on the 4th of December 1914. The posters detail that the Auctioneer will accept any bid from German or Austrian buyers on the condition that the buyer is not acting on behalf of any country which is at war with Great Britain. The Auctioneer also reserves the right to cancel any purchases found to be in violation of this condition. Presumably, the posters were in use until 1916, when Australia's 7th Prime Minister, Billy Hughes, negotiated the sale of Australia's entire wool clip to the British Government for the remainder of The Great War. The British government agreed to buy Australia’s entire wool production in 1916 at 55% above market price. In the end, £160,000,000 British pounds was paid by the UK Government to Australia for the nation’s entire wool clip between 1916‑1920. This would be equivalent to £7,619,760,000 in 2022 money when accounting for inflation, or $13,239,000,000 AUD.Two posters on yellowed card. The first poster is printed in black text with a title of “NOTICE”. The second poster is printed in red text with the same title, “NOTICE”. Both posters have 4 body paragraphs of text, detailing restraints put on potential wool buyers because of war with Germany in the Great War. Both Posters are finished with a date in the bottom left corner.the great war, world war one, melbourne wool exchange, melbourne wool brokers association, wool sales, 1910s

Quilt called "Diversions" and made by Barbara Macey in Melbourne in 1985. Barbara Macey is a founding member of the Running Stitch group and its sole remaining member. This quilt was part of a touring exhibition called "Wool Quilts Old and New" presented by Running Stitch, 31 Jan. 1986 to Feb. 1987. It was catalogue entry no. 6. The artist's statement reads: "Being of Scottish descent, I was most interested to discover the Scottish Herringbone quilt, made of pieces of wool tweed, sewn herringbone fashion, to strips of fabric later seamed together to make a quilt. Having a variety of wool fabrics to work with inspired this interpretation of a traditional idea." This quilt was later part of an identically titled exhibition held at the National Wool Museum in 1989."Diversions" by Barbara Macey, 1985.quilting, handicrafts, running stitch group, running stitch collection, masters of technique: creators on cloth - exhibition (15/06/2001 - 22/07/2001) highlights of the national wool museum: from waggas to the wool quilt prize - exhibition (22/09/2001 - 02/12/2001), macey, mrs barbara

Developed in the Research and Development Department of VISY Board by Alex Ong and Richard Pratt, this manufactured version of 'making do' philosophy began with a humanitarian outlook. Less than 100 were made in the pilot program and these were distributed to the homeless through welfare agencies around Melbourne. They were designed to provide some protection from the weather and to be portable and disposable. Unfortunately, the project was short lived, as some safety issues were unable to be resolved: ie, someone inside the bag would not be able to escape should the bag be set alight. It was found that people sleeping on the streets preferred sheets of cardboard or paper to avoid this possibility. Lois Densham heard a story on the radio about these sleeping bags and contacted VISY to see if she could acquire one for the Running Stitch collection. She approached the Collingwood office and it is now believed to be one of the last remaining items from this program.Recycled paper sleeping bag made from brown paper and sealed at the 'mouth' with paper tape (masking tape). Approximately six feet long, it would accommodate an adult.visy board running stitch group, running stitch collection, homeless, sleeping bag, pilot program, richard pratt

Album contains photos of the Elliott and Dibb wool sorting and blending operations; also six photos showing operations inside the Oriental Scouring Mills, Geelong. There were yellow sticky notes (non-contemporary, written by Gerald Van Rompaey) containing information on each photo scattered throughout the album. These have been removed for conservation reasons and their details transcribed here. The first note stated: "Michael's mother (the donor's mother, Mrs Elliott) said this album was got up as a promotional tool for an expensive overseas trip by Harold E. (her brother in law in 1950)". The 1st photo shows the skirtings in the reclass bins in the former Australian Estates Collins Street show floor. The 2nd photo is similar to the first; the 3rd photo shows the fleeces being reclassed. The 4th photo shows the wool sorters at work (Harold Elliott can be seen in the double breasted suit). The 5th photo is of more reclassing, and the 6th is similar. The 7th photo shows Harold Elliott with the sorters and the 8th photo is similar. The 9th photo shows the first and second pieces of the skirtings being sorted. The 10th photo is a general shot of full bales and the reclass bins. The 11th photo shows a double dumping press at work, compressing the already full bales for shipment. The 12th photo shows scouring operations at Oriental Scouring Mills in Geelong (the scouring has been contracted out by Elliott and Dibb). The 13th, 14th and 15th photos shows more scouring at the Oriental Scouring Mills. The 16th photo shows two men (Keith Dibb on the right) viewing the scoured wool. The 17th photo shows the scoured wool being pressed at the Oriental Scouring Mills, Geelong. The final six photos (the photos of the Oriental Scouring Mills operations) are all stamped on the verso with a photographer's stamp (Frazer Studios, Melbourne), suggesting that Elliott and Dibb commissioned a photographer to go to Geelong to take the photos. (a note from Gerald Van Rompaey identifying five photos has been found and is now located in supp. file 1417. It does not seem to identify photos in this album; the photos he identifies may turn up at a later stage.)Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows the skirtings in the reclass bins in the former Australian Estates Collins St show floor. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows the skirtings in the reclass bins in the former Australian Estates Collins St show floor. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows fleeces being reclassed. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows the wool sorters at work (Harold Elliott can be seen in the double breasted suit). Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows wool being reclassed. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows wool being reclassed. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows Harold Elliott (double breasted suit) with the wool sorters. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows Harold Elliott (double breasted suit) with the wool sorters. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows the first and second pieces of the skirtings being sorted. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows the full bales and the reclass bins. Photograph from album compiled by Elliott and Dibb, wool merchants, 1950. This photo shows a double dump wool press at work, compressing the already full bales of wool even smaller for shipment overseas. Photograph from album compiled by Elliott and Dibb, wool merchants, in 1950. This photo shows the scouring operations at the Oriental Scouring Mills in Geelong (the scouring had been contracted out by Elliott and Dibb). Photograph from album compiled by Elliott and Dibb, wool merchants, in 1950. This photo shows the scouring operations at the Oriental Scouring Mills in Geelong (the scouring had been contracted out by Elliott and Dibb). Photograph from album compiled by Elliott and Dibb, wool merchants, in 1950. This photo shows the scouring operations at the Oriental Scouring Mills in Geelong (the scouring had been contracted out by Elliott and Dibb). Photograph from album compiled by Elliott and Dibb, wool merchants, in 1950. This photo shows the scouring operations at the Oriental Scouring Mills in Geelong (the scouring had been contracted out by Elliott and Dibb). Photograph from album compiled by Elliott and Dibb, wool merchants, in 1950. This photo shows two men (Keith Dibb on the right) viewing the scoured wool at the Oriental Scouring Mills in Geelong (the scouring had been contracted out by Elliott and Dibb). Photograph from album compiled by Elliott and Dibb, wool merchants, in 1950. This photo shows the scoured wool being pressed at the Oriental Scouring Mills in Geelong (the scouring had been contracted out by Elliott and Dibb). Photograph album front cover. Album compiled by Elliott and Dibb, wool merchants, 1950.Frazer Studios / (C.J. FRAZER) / 165 BOURKE STREET / MELBOURNE, C.1 / CENT. 4358woolclassing, wool processing, elliott and dibb oriental scouring mills, scouring, wool press, wool press - double dump

Part of dinner set owned by Donor's grandmother Martha Edwards, 42 Husband Road, Forest Hill.Founded in 1851 under the name Hulme & Booth and it was not until 1877 that the name was changed to Burgess & Leigh. Until 1999 Burgess & Leigh was still being run by the family.|In August 1999 the factory was rescued from receivers by R&W Darling and the name changed to Burgess, Darling & Leigh.|As the business grew it was moved to a new factory in the rural district of Burslem. As with all industries, potteries have seen great changes and Burslem & Leigh adapted and modernised.|The business continues to this date. See supplementary file for more information.Cream crockery dish with lid. The dish and lid have a gold rim edging and black key patten and brown floral band on the dish and lid. The dish has scalloped edge handles with gold trim and the lid has a handle with gold trim.Burleigh Ware, Brugess & Leigh, Burslem, Englanddomestic items, crockery

The key ring was for sale at the School as a memento of the 140th anniversary 1861-1926.Gold and black enamel shield attached to a gilt key ring. The key ring has 'Burwood East Primary School H54' inscribed above a picture of the school and 'Together we Learn' on the lower edge. On the underside is 'Best Wishes from Burwood East Primary School. Founded 1861'.See Description.numismatics, tokens

The establishment of a University in Nunawading may once have seemed an unlikely prospect, but is now a reality with the founding of the University of the Third Age.The establishment of a University in Nunawading may once have seemed an unlikely prospect, but is now a reality with the founding of the University of the Third Age.u3a nunawading, subramanian, chandra

Vermont Secondary College celebrates 35th Anniversary. Founding Principal, Frank Douglas, meets current Principal John KnotheVermont Secondary College celebrates 35th Anniversary.vermont secondary college, douglas, frank, knothe, john