Conditions of sale by private contract dated 5th July, 1941 between B. Hocking (seller) and Mrs. I.F. Stephenson (buyer) for land situate 25 Reginald Street, Bendigo being Crown allotment 7 section 104C land described in certificate of title volume 2684 folio 536778, together with 5-roomed weatherboard dwelling and all sundry. Also all electric globes and shades, all wire doors and screens and ''Main'' gas stove connected in place of present gas stove. Price 400 pounds.organization, business, h.a. & s.r wilkinson real estate

Conditions of sale by private contract dated 4th April, 1933 between E.M. Dudley (seller) and C.J. Tyack for land situate No.161 honeysuckle street, Bendigo being land described in certificates of registration as residence area no. 32525 and residence area no. 32526, together with 6-roomed weatherboard dwelling, garage and all sundry outbuildings and erections on said land. Also all electric light fittings, duck blinds in sleep-out, all wire doors and windows, window blinds and name plate. Price 545 pounds.organization, business, h.a. & s.r wilkinson real estate

Black & white photograph 20cm x 25cm of the Bendigo Butter Factory in Mundy St., mounted on cardboard. It appears to have been part of a display, with explanatory notes attached to each photograph. See 11011.6. On the reverse of the Title photograph is the date 1950-1955 and a blue registration stamp with the words 'Pure creamery, Australia, Victoria regd'. An interior photograph shows a calendar with the date March 1957. This photograph shows an unidentified female, carrying a wire basket with groceries, choosing Bendigo Butter from a refrigerated unit.bendigo, industry, bendigo butter factory.

Small satin covered horseshoe, with a decorative frilled netting at front. Three 1.5cm ribbon bows are attached to the front. Three small chiffon “roses” and a wax orange blossom bud on a paper covered wire are attached to the front. Top of the horseshoe has once had a ribbon loop to carry over the bride’s arm, but this has been badly damaged. Part of wedding dress collection 11400.528, 11400.53029, 11400.530, 11400.531 Wedding dress worn at marriage of Barbara Johnson to her first husband Ian Bulte.costume, female ceremonial, wedding horse shoe

Conditions of sale by private contract dated 24th October, 1944 between Mr. T. J. Lynch (vendor) and Mr. L. G. Thirlwell (purchaser). Property: land situate No. 584 Hargreaves Street, Bendigo being part of Crown allotment 3A section 141C described in freehold title volume 5655 folio 1130899, together with 4 roomed weatherboard dwelling, all sundry outbuildings, bath, copper and stand, fly wire doors and window screens and all window blinds. Price: 275 pounds.organization, business, h.a. & s.r wilkinson real estate

Cream manilla pictorial envelope printed as 'Trolley Wire' magazine of the South Pacific Electric Railway PO Box 103 G.P.O. Sydney N.S.W. Postage Stamp in green of Queen Elizabeth II, 5d. Postal stamp in black ink 'Sydney 4pm, 15 Oct 1964, N.S.W. Aust. Adressed in ballpoint pen 'Mr B. Miller, Tramway Offices, Dispensary Walk, off Pall Mall, Bendigo, Victoria. Written in biron on back: Basil - Bob Prentice will ring you 4pm today.person, individual, basil miller

Patient controlled analgesia, or PCA, was developed in the 1960s. This mode of opioid administration allows patients to directly respond to their individual levels of pain. It is estimated there are now somewhere between six and 15 million uses annually.Two parallel sections enclosed in cream coloured metal casing and joined in the centre via a brown metal section that also forms the base and stand. The left side has a dark brown perspex cover with a small brushed metal latch and handle. The right has a grey metal panel with dial, knobs and a rolled paper dispenser. A clear plastic intravenous bag is attached to the device by a clear plastic tube.There is also a black plastic coated wire attached to a handle with a red button on top. This is used for the patient to administer the analgesia. analgesia, intravenous, flinders medical centre, janssen scientific instruments, patient controlled

Colour photograph of BTM tram 28 wheels loaded onto a John Clowes supplied trailer for transport to AETM Adelaide on 8/1/1999 for reprofiling. In photo are John Clowes (standing by car), Stephen Butler, Simon Jenkins and Alastair Reither and two other people. Trailer positioned over pit in 5 road. Used in Feb. 1999 issue of Trolley Wire, page 41. Note spelling of John Clowes name in caption is "Clowes". Photo by Darren Hutchesson. Photo on AGFA Prestige paper.On rear of photo in blue ink "8/1/99 / Car 28, wheels/axles being loaded onto John Clowes' trailer for transport to out friends at AETM St Kilda - for reprofiling. / Photo: Darren Hutchesson"wheels, 28, aetm, btm, john clowes, tram 28

Black and white print of a donated negative. Print made 8/1998. Photo of Victorian Railway tram No.34 at the Brighton Beach terminus. Tram has the destination of "St Kilda Rly Stn". In the overhead can be seen the pan for assisting the driver to put the rear pole onto the wire. Also in the background of the photo is a stone wall of the railway tunnel under the road that served the Brighton Beach Pier. Photo taken 7-4-1950. See Victorian Railways to '62, pages 47 and 49 re railway tunnel.tramways, trams, brighton beach, vr, railway tunnel, tram 34

Black and White photograph, of Bendigo 3 climbing Mitchell St, near the Railway Station with the Destination of Quarry Hill. Has a Hutton's Ham ad on the front drivers panel and two rood ads. In the background are Sandhurst Dairies shop advertising Toppa Ice Cream, a boot repairer and a van marked Jeffreys Bread parked on the north side of Mitchell St. Nearing the point where the double track became single - see the signal wire insulators in the overhead. Printed on Fujichrome paper. Two copies held."TMSV Sales" stamp on rear. On rear of in ink 'HTT16 = MM N 102 = Geel 32 = BED 3"trams, tramways, bendigo, mitchell st, quarry hill, overhead, tram 3

Demonstrates the way the Australian Bi-Centenary and other celebrations were carried out with souvenir prints.Framed print of a horse drawn tram (3 horses) see Reg Item 699 at the corner of Sturt and Lydiard St, within a wooden frame, with non-reflective glazing. The print by the Harris House of Photography has been mounted onto a piece of Masonite. On rear are picture hanging metal loops and a wire hanging strip. In the bottom right hand corner of the print are "Celebrating Australia's Bi Centenary / Ballaarat's 150th Anniversary / Ballaarat's Tramways Centenary" and in the bottom left hand corner "Reproduced by Harris House of Photography 1988".trams, tramways, horse trams, sturt st, lydiard st nth, ballaarat tramway company, town hall

A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge; red plastic shaft casing featuring 'W' logo and gold whipping. Model name printed on metal adhesive labels fitted to shaft bridge. Handle wrapped with brown leather. Net anchored to metal wire wrapped around head frame. Red plastic butt cap with partial white label featuring manufacturer's 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, String, Leathertennis

A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge; red plastic shaft casing featuring 'W' logo and silver whipping. Model name printed on metal adhesive labels fitted to shaft bridge. Handle wrapped with brown leather. Net anchored to metal wire wrapped around head frame. Red plastic butt cap with white label featuring manufacturer's 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Stringtennis

A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge; red plastic shaft casing featuring 'W' logo and silver whipping. Model name printed on metal adhesive label fitted to shaft bridge. Handle wrapped with brown leather. Net anchored to metal wire wrapped around head frame. Red plastic butt cap with white label featuring manufacturer's 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Stringtennis

A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge; red plastic shaft casing featuring 'W' logo and silver whipping. Model name printed on metal adhesive labels fitted to shaft bridge. Handle wrapped with red grip tape. Net anchored to metal wire wrapped around head frame. Red plastic butt cap with white label featuring manufacturer's 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Stringtennis

A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge; red plastic shaft casing featuring 'W' logo and silver whipping. Model name printed on metal adhesive label fitted to shaft bridge. Handle wrapped with brown leather. Net anchored to metal wire wrapped around head frame. Red plastic butt cap with white label featuring manufacturer's 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Leather, Stringtennis

A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge; white plastic shaft casing featuring 'W' logo and silver whipping. Model name printed on adhesive label fitted to shaft bridge. Handle wrapped with brown perforated Wilson-branded leather. Net anchored to metal wire wrapped around head frame. White plastic butt cap with label featuring manufacturer's 'W' logo. in red Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Leather, Stringtennis

A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge; white plastic shaft casing featuring 'W' logo and silver whipping. Model name printed on adhesive label fitted to shaft bridge. Handle wrapped with brown perforated Wilson-branded leather. Net anchored to metal wire wrapped around head frame. White plastic butt cap with label featuring manufacturer's 'W' logo. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Leather, Stringtennis

A Wilson 'T5000' metal tennis racquet, with double shaft; metal shaft bridge; black plastic shaft casing featuring 'W' logo and silver whipping. Model name printed on adhesive label fitted to shaft bridge. Handle wrapped with brown leather. Net anchored to metal wire wrapped around head frame. Black plastic butt cap with central hole & adhesive label featuring manufacturer name in silver. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Leathertennis

This desk or table-top electric fan marked is typical of the fans popular in the 1930s through to the 1950s. The fans were made for use in the home, office or factory and were produced in a variety of sizes. They were available in both fixed and oscillating models with different speeds. The fans cost several weeks of a man's average wage at the time and were promoted not only as improving comfort in the home but also increasing efficiency at work. With the development of air-conditioning from the 1960s and its increasing use in the workplace and then into the home, fans declined in popularity. This fan was manufactured by the Engineering & Construction Company (ELCON) an Australian owned and patented company originally based in Melbourne, Victoria in the late 1920s. The company became a subsidiary of the Electricity Meter & Allied Industries Ltd (EMAIL) in 1939. Then in 1946 they were decentralised to Orange, New South Wales. EMAIL brands included Email, Emailair, Westinghouse, Carmichael, Elcon, Metters and Weatherall. Electrolux purchased the major appliance division of Email in 2001.This item is representative of early electric fans manufactured in Australia in the early to mid 20th century. They were widely used throughout Australian homes and workplaces prrior to the development of airconditioning.This early electric table fan has four metal blades attached to an egg shaped enclosed motor. Each blade is attached with three rivets. The fan has a wire safety guard surrounding the blades. This is attached to a circular metal base.There is a switch in the centre of the base to adjust speed. A knob at the back of the fan enables its position to be adjusted. There is no longer any branding visible on the fan but it has been identified as an ELCON fan manufacured in Australia. The electrical cord is not the original which has been replaced.electric fans, home appliances, elcon fans

Photocopy, 12 sheets, of a magazine article titled "Melbourne on the brink of change", Trolley Wire, May 1998 by Dale Budd about the corporatisation of Melbourne's trams into Swanston and Yarra Trams. Gives details of the fleet, operational aspects, ticketing and driver-only operation. Includes notes on South Melbourne depot sale, historic fleet, non-passenger cars, Z class tram overhauls, pantograph operation, possible privatisation, Preston Workshops, low floor trams, W class. Also a brief update of March 1998.trams, tramways, swanston trams, yarra trams, south melbourne depot, driver only modifications, ticket machines, lists, depot allocation, z class, w class, heritage fleet, privatisation

This is a photograph of the ship, 'Speculant' at the Warrnambool Breakwater. There is another ship alongside the 'Speculant' and the dredge, 'Pioneer' is in the background. The 'Speculant' was a three masted barquentine of 412 tons built in Scotland in 1895. It was purchased by P. J. McGennan in 1902 and wrecked at Cape Patton, near Apollo Bay, in 1911. It was one of the few ships to be registered at the Warrnambool port. Peter John McGennan (1844-1920) was a cooper by trade, initially operating a shop in Warrnambool making cheese vats, churns, coolers and tanks. He then opened a factory in South Warrnambool making butter boxes, nails and barbed wire. He owned several ships, using them to import material for his businesses, especially white pine timber from New Zealand, and to export his own products. He was a Warrnambool Councillor from 1885 to 1891.This photograph is of interest as a reminder of the importance in the late 19th century and early 20th century Warrnambool of Peter McGennan and his industries and community work.This is a black and white photograph of three ships. It is enclosed in glass with a varnished wooden frame with an ornate edging. The photograph shows one ship in the background and two at the Warrnambool breakwater with some railway cartage trucks in the foreground.ship 'speculant', dredge 'pioneer', p.j. mcgennan

This extract from an advertisement in the Sydney Morning Herald newspaper of 1/12/1959 places the era in which this water bag was prolific throughout rural Australia. " ABERDEEN CANVAS GOODS for the man on the land here is Australia's most useful, convenient and hygienic water bag. Its special unbreakable plastic nozzle is fitted with a perforated filter strainer. Made from long flax canvas, its universal handle enables it to be hung on bumper bar, wire fence or on hook or nail" The availability of clean cool drinking water in remote rural locations was essential for survival under the blistering Australian summer sun. This was in a pioneer era when transport, roads and convenience stores were ,in a lot of "outback" Australia, in short supply and survival was dependent upon what could be carried by vehicle or pack horse.When the Kiewa Hydro Electricity Scheme became a reality, the use of the water bag was one of the essential personal items of survival given to each person working in the forests and on and in the high plains environment. Even in an outside stationary work place the availability of cool clean water was a prerequisite. The canvas water bag allowed any wind or airflow to cool down the water, even on very hot days, to provide a refreshing and throat quenching supply of water. These bags could be fastened onto the front of vehicles or hanging from shady tree branches thereby permitting air flow around the bag. During the "wearing in" period the residual taste from the canvas was fairly strong, this became considerably less as time and a half moved on. This "Aberdeen" long flax canvas water bag is held together on two sides and the top by strong heavy cotton stitching. The iron fashioned carrying handle has, protruding from its top elevation ,a very strong hook (well in excess of the bags' weight requirement). At the top, of the bag, and on one side only, is a brown coloured bakelite spout (with an inbuilt filter) protruding upwards. This spout has its matching , screw on, lid complete with attachment chain (not fixed at the handle end)On the front of the bad and stenciled in bold lettering, "ABERDEEN" and directly below "Travellers" and below this "FILTER BAG". Below this are two parallel black lines enclosing an ochre coloured band(12mm wide) running around the bottom section of the bag. Below this band is stenciled the number 14 in black (25mm high) figures. The spout lid has stamped on the top surface and within the outline of Australia, "ABERDEEN FILTER WATER BAG". Above this and close to the edge of the lid is pressed "PAT. No 9149/32 and down at the bottom rim is stamped "RD. No. 9870". canvas, water bag, water container, camping equipment, survival pack

This pessary came from Professor Geoff Bishop's rooms, Mollison House, 386 Albert Street, East Melbourne. As well as the UK, Portex had divisions in the USA and Canada. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids. Portex brand ring pessary in original packaging. Consists of circular ring of cream vinyl, in sterile sealed pouch with transparent plastic at back. Stamped on pouch "PORTEX ENGLAND", and the text "USE BY FEB 77" and "CONTROL No F/1 505". The ring is size 700/300/056 - 56mm. A sticker on the back of pouch gives instruction for cleaning the pessary.pessary, intrauterine device

This pessary came from Professor Geoff Bishop's rooms, Mollison House, 386 Albert Street, East Melbourne. As well as the UK, Portex had divisions in the USA and Canada. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient time, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Portex brand ring pessary in original packaging. Consists of circular ring of cream vinyl, in sterile sealed pouch with transparent plastic at back. Stamped on pouch "PORTEX/MADE IN ENGLAND", and the text "USE BY JAN 77" and "CONTROL No 06 88". The ring is size 700/300/065 - 65mm. A sticker on the back of pouch gives instruction for cleaning the pessary. A red dot is also stuck to the back of the pouch.pessary, intrauterine device

The photograph shows Geelong No. 2, built by Duncan and Fraser of Adelaide in 1911 in its as-built configuration, c1920 at the Wharf terminus, known as the Moorabool Street Pier. The tram line was opened in 1912 and closed in 1940 when the track in Corio St was extended to the Beach terminus. There are a number of horse-drawn vehicles in the view with goods being loaded or unloaded on the ship moored on the right. The tramway was operated by the Melbourne Electric Supply Co. (MESCo). The photograph from the collection of Ken Magor was published in the Sydney Tramway Museum's magazine Trolley Wire in April 1981. The photo caption advises - "The steamship to the right is the Edina, a veteran Port Phillip steamer which was launched in 1854 and was not broken up until 1957." This tram is part of the collection at the Ballarat Tramway Museum.Yields information about Geelong No.2 and the Wharf terminus.Digital image of Geelong tram No. 2 at the Wharf terminus c1920. geelong, wharf, mesco, moorabool st pier, edina, tram 2