Painting by Miss M. Matheson (later Mrs. H.T. Sebire).Painting on a wood panel, of red poppies and yellow daisies with a cream background.paintings, artworks

Metal marmalade cutter with a hand-cranked wood handle, on a wooden base.'Victor'fruit slicers

The Kings Regiment plaque is in the centre of the plaque, its made of dark wood, the

Made in U.S.A.Corona Essence Flavouring specialist thermometer. Mounted on yellow painted wood.thermometers, measuring instruments

This tray was handcrafted by Mr James Ripper, a great uncle of Mrs. Jean Raper.This item is from Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper.A rectangular serving tray, hand crafted from wood with a leaf pattern. handcraft, wooden tray, raper family

Ian Darnton Watson was a member of a prominent family of civic leaders in Wodonga. He was born on 6th July 1925 in Albury, the first son of Kenneth Darnton Watson and Phyllis Lenore Emily Austin. He completed his primary education at Albury Grammar School, and later became a boarder at Melbourne Church of England Grammar School. He enlisted for military service at Albury on 25th January 1944 and commenced full time service on 8th February 1944 at Royal Park in Melbourne, Victoria and was allocated to the 2nd Medium Artillery Regiment. He embarked on overseas service in Borneo on 30th July 1945 and disembarked in Australia on 15th April 1947 after serving with the Australian occupation forces in Japan. Mr Watson was discharged on 22nd April 1947 at which time he was a member of the Australian 2nd Medical Regiment. On discharge he returned home to help his father farm his property, de Kerilleau in Wodonga which was classified by the National Trust in 1974. Ian described his father, Kenneth as a hardworking, practical man, who for two years from 1929 - 1931, had been the Wodonga Shire President. Cr K. D. Watson was again elected to the Council in 1943 and served until he died in October 1951. In March 1957, he married Miss Lesley Buttfield, of Sydney, NSW. They had three children, Fiona, John and Rowena. John was later to become a member of Wodonga Council and served as Mayor. Ian was President of the RSSAILA (Returned Sailor's, Soldier's and Airmen's Imperial League of Australia) branch at Wodonga from 1953 to 1955 and remained as a member after that time. The League was renamed to the Returned Services League in 1965. Mr Ian Watson died on 14 December 1981, aged 56.This certificate is significant because it recognises the service of Ian Darnton Watson in support of Returned Servicemen in Wodonga.A framed certificate mounted on card. The frame is plastic with a wood grain finish.On Certificate:- R.S.S.A.I.L.A. VICTORIAN BRANCH Presented to Ian D. Watson, As a token of esteem and in grateful recognition of valuable services rendered as President of the Wodonga Sub Branch Years 1953 to 1955.wodonga rssaila, ian darnton watson, watson family wodonga, rsl wodonga

1934 Victoria Trotting Derby, Pacers Division1934 Victoria DerbyLarge rectangular black and white race photo finish in wood frame.Written in black ink : Trotting Derby / Pacers Division / Winner " Grand Harold" / Owner: A Lee - Trainer: G Gath - Driver: A Gath / Richmond Vic. 5/3/1934trotting, grand harold, a gath, richmond racecourse, victoria derby, 1934, harness racing, g gath, george gath, albert gath, a lee, ar gath

A small, writer for note paper or index cards, designed by an East German company production started in 1980 and continued in the former DDR until 1989.Metal braille machine with red base and 7 white wood keysMechanische Werkstatt fur Blindenhilfsmittel der DDR 7033 Liepzig Burgauenstrabe 9braille equipment, picht

Bendigo Advertiser "The way we were" from Tuesday, February 1, 2005. wood merchant Eric Finch was in a spot of bother when this photo was taken in the late 1940s or early 1950s. Eric, pictured on the left was a general carrier and wood merchant and had to unload the wood from his truck before he could get it out of the bog. As if that didn't add insult to injury, the wood had previously been cut and loaded by hand, there were no chainsaws in those days. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Inge KING (26 November 1915 – 23 April 2016) Born Berlin, Germany Arrived Australia 1951 Inge King trained as a wood carver and studied at the Berlin Academy (1937-1939), Royal Academy London (1940), and the Glascow School of Art (1941-1843) . She moved to London in 1847 and began carving organic abstract forms in wood and stone. In 1949-50 she went on a study tour to the United States of America where she was inspired to work in metal . Inge King arrived in Australia in 1951 and she completed several large scale public works. Between 1861 and 1875 Inge King lectured at the Institute of Early Childhood Development, Kew. From 1976 to 1987 she lectured in Sculpture at Royal Melbourne Institute of Technology. She was a founding member of the Ceminal Centre Five group, and she actively lobbied architects, governments and State galleries to include modernist sculptures in their plans and displays. In 1991 Inge King joined the first National Trust of Australia (Victoria) Public Art Committee, advising on public art at risk and worthy of Trust classification. The Australian Women's Art Register describes Inge King as having been at the forefront of developing a non figurative vocabulary in Australian Sculpture. Welded bronzed steel sculpture painted black and red. This sculpture by Inge King was purchased in 1967 with funds raised by staff and students of Ballarat Teachers' College, a predecessor institution of Federation University Australia. During this era a collection was made which resulted in an annual purchase or commission of an artwork of note. The Federation University Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. Signed 'I. King' on the lower steel plate. art, artwork, inge king, king, sculpture, ballarat teachers' college collection, welded metal, metal sculpture

Chest wooden cloth covered with decorative metal reinforcements on end. 4 wood supports on lid, 1 wood support front & back. I lock & 2 cliplocks at front. Leather handles at ends.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This item was probably acquired for, and used by, participants in telegraphy at the Ballarat School of Mines courses between 1873 and 1893.An electromagnetic relay device on a brass base plate, and mounted onto a wood base. It is covered by a removable wood-framed glass sided cage. The item has four terminal posts and an adjustable conductor mechanism.ballarat school of mines, telegraphy, relay device, telegraph coding

A 10cm round cylinder of wood on a 1.2cm round steel shaft, shaped into a 15 x 15cm crank handle. Both ends of the wood are banded with 2.5cm flat steel, fastened with bullet head nails

Colour Photograph of a sleeper being removed from the access track of the Ballarat Tramway Museum on 4.12.95. Old sleeper, or pieces of wood, being removed with a backhoe. Gary Wood with shovel and Clayton Giles in background.On rear in pencil is 3 inside a circle and stamp with sticker 'William F. Scott/ 4.12.95 E'btm, trackwork, sleepers

Framed sheet music booklet, entitled 'Lawn Tennis, The Good Old Game'. Wood frame glazed with Sandel UV glass. No hanging fixtures. Materials: Ink, Paper, Wood, Cardboard, Metal, Glasstennis

'Lawn Tennis' game. Contains an instructions sheet, a wood mallet and four circular wooden tokens. Appears to be missing a mallet. Bottom of box features printed play area. Materials: Wood, Ink, Plastictennis

T.M. Gardiner"The Royal" model wooden racquet with red whipping and white tape on shoulders and finely grooved wood handle. Leather cuff on butt. Oval head. Materials: Wood, String, Gut, Leathertennis

Removed by the Ringwood Town Hall when it was demolished in the 1968 - 1970. Donated to the Ringwood RSL.Wooden Honour Board from the Ringwood Town Hall. Ringwood District Roll of Honour 1914 - 1918. The centre panel headed “Died on Service” list 14 names. The side panels comprise of 4 columns of names containing 108 in total. The top section includes carving of Gumnuts with a circular panel including a tree and plough.

This is an example of an early airway management device for anaesthesia. Hollow curved metal tube with flat plate at one end and two tube coming out of it, one curved to the left, one curved to the right.Engraved by hand on curve of tube: POE'S / ASA 1940 Engraved by hand on flat plate: Wood Stamped into flat plate: REGGERairway, poe, american society of anesthesiologists

Colour photograph of a painting of a timber buildingWritten on back of photo: "Painted by O.J. Wood 1980 from original photo. Typed on back of photo: "Maddens Wine Hall, & Great Southern Post Office, & Coach Depot Circa 1910. | Located at Map-Ref' 536-074 | (Photo of painting of Mrs O.J. Wood, nee Olcorn)wood family, olcorn family, madden wine hall, great southern post office, coach depot

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. Mrs Florence Potts invented in 1871 a detachable handle made from walnut wood with a metal latch to release the handle. These wooden handles prevented burned hands and were sold to grateful women all over the world. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.Mrs Florence Potts invented this type of detachable walnut wood handle with a meta release latch for sad irons in 1871 and it sold widely throughout the world to grateful women including those in Moorabbin Shire. The family of Ms May Curtis were early settlers in Moorabbin ShireA) A sad iron, made of cast iron , has a special handle invented in 1871 by Mrs Florence Potts of Iowa, USA. B) The detachable handle made of walnut wood to prevent burned hands, was attached to the iron by a metal latch.A) UNITED/ N0 / 50 / AUSTRALIApotts florence, iowa usa, melbourne, moorabbin, sad irons, kitchen equipmentn fireplaces, walnut wood, sewing, laundry, table ware, linen, pioneers, early settlers, washing days, craftwork

The bosun’s chair is a typical piece of equipment included on board a vessel in the late 19th and early 20th century. The nautical word 'bosun' is an abbreviation of the word 'boatswain' who is the person responsible for the repair and maintenance of the vessel. It could be used when rigging the sails and for rescue at sea, along with a thick rope anchored on shore or a rope between ships. It could also be used to move passengers to and from a ship as well as cargo on, to and from the vessel. A bosun's chair is a simple piece of equipment made from a short plank of wood and a sturdy piece of rope. It looks a little like a child's swing but usually has a pulley system that allows the user to adjust the length of the hanging piece of rope, and in so-doing adjusts the height above the floor or ground or sea. In modern times a harness would also be worn by the bosun’s chair user for safety reasons. Bosun's chairs are also used by window cleaners, construction workers and painters. The bosun’s chair is sometimes just a short plank, or even a canvas sling. The bosun's chair is significant for its association with maritime equipment carried on board a vessel in the late 19th and early 20th century for maintenance and safety purposes. It was occasionally used to save lives. The bosun's chair is also significant as an early version of equipment still used today. Since its invention there have been many safety features added in certain industries such as window cleaning and painting.Bosuns chair; flat smooth rectangular piece of wood, with rope passing through two holes at each end of plank and looped together above plank to form a suspended seat swing. Loops a are joined with knot work and ends are spliced together under the seat.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, bosun's chair, bosuns chair, boatswains chair, rigging, maritime equipment, bosun's seat, life saving, marine technology, ship rigging

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingMetal chisel on a wooden handle, with a metal ferrule at each end of the handle. kazenwadel, blacksmith, wood, tools camp 3, metal, wood working

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingWooden mallet made in one piece with a curve halfway along it`s length, handle at one endkazenwadel, blacksmith, wood, tools camp 3, chisels, mallets

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingMetal Wedge long and tapered at one end, worn and flattened at top end ( maybe from being struck with a hammer )kazenwadel, blacksmith, wood, tools camp 3, chisels, mallets

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingMetal Wedge long and tapered at one end, worn and flattened at top end ( maybe from being struck with a hammer )kazenwadel, blacksmith, wood, tools camp 3, chisels, mallets

Dunlop 'Maxply' tennis racquet and head press. Varnished wood frame, leather grip with remnants of blue towelling grip tape.. Cream painted mid-section, with orange and black decals, some peeling. Australian made. Dunlop head press is wood and metal with triangular metal hande to close press. Materials: Wood, Gut, Paint, Leather, Metaltennis

These two boards were clipped on to the creased edge of trousers and the item stored in this way. They were used in lieu of irons in the days before electric irons. These items come from the household of the Angus family in Warrnambool. Dr William Roy Angus (1901-1970) studied medicine in Adelaide and Edinburgh. He practised medicine in South Australia and at Nhill before coming to Warrnambool in 1939. In later years he specialized in ophthalmology. The Angus family lived at ‘Birchwood’, a house now demolished. Dr Angus was very civic-minded and was active in a great number of community groups.These items are retained because of their connection to past years and because of their association with the well-known local Warrnambool doctor, Dr Angus. These are two rectangular pieces of wood with three metal clips on each. Two of the metal clips are badly rusted. Both pieces have printed material etched into the wood. A piece of string is attached to the end of each board.The Aveca (Patented) Trouser Stretcher and Presser The Aveca (Pat. Appd. For) Trouser Stretcher and Presser men’s accessories, history of warrnambool

Circular wood base with 1 cm groove. Internal raised velvet base - worn condition. Dark blue in the central area; light tones outward edge Lacquered timber of light wood. Victorian origin.

'Puma' light-weight model wood tennis racquet. Made by Prosser & Sons Company, Australia. Leather grip. String whipping around shoulders. Teal and gold decals. Materials: Wood, Gut, Paint, Leathertennis