Showing 8074 items
matching edgely
-
Bendigo Military Museum
Award - RETURNED FROM ACTIVE SERVICE BADGE
Badge issued to Servicemen and women who returned from active duty overseas in recognition of their service. It is not clear who this WW1 Returned from Active Service badge belonged to at this point.Gold coloured round badge. Rising Sun emblem in centre with AIF below. Crown on top of circle. Around edge of outer edge "Issued by Dept of Defence" and "Returned from Active Service" from bottom. On back is small clip attached to two small metal hooks/rings.Inscribed "199561" on back. Also "Stokes & Sons".returned service badge, ww2 -
Learmonth and District Historical Society Inc.
Photo - Dalgleish/councilors, Richards & Co.Photos.Ballaarat, Cr. J.Dalgleish Esq. and Councilors, 1883-84, "circa 1884"
This collection of photos is of President John Dalgleish Esq.and all councilors for the year 1883-84. Councilor Dalgleish was elected to council in 1866-72 and 1880-87,serving three terms as President1869-70,1883-84,1884-85. The other councilors represented are J.W.D.Innes,J.King,A.Findlay,G.Rennie,J.Baird,F.Edwards,J.Spiers,W.Uren M.L.A. and secretary L.Bregenzer.Original collection of photos of councilors taken "circa 1884"A collection of photos of President J.Dalgleish Esq. and all councilors for the year 1883-84. The Frame is wide brown with decorative carving to the outer edges and "gold" paint on the inner plain edge. The photos are oval with gilt on edge of "cutout" and set in a circle around the inscription PRESENTED by the President J.DALGLIESH ESQ. to the BALLAARAT SHIRE COUNCIL 1883-84.Around each photo is a fine black line "linking" each.The mount is very light "tan"in colour.At the base is the name Richards & Co.Photos, Ballaarat.PRESENTED by the President,J.DALGLEISH ESQ.TO THE BALLAARAT SHIRE COUNCIL.1883-84.baird j, ballaarat shire council 1883 84, dalgliesh john esq, innes j, king j, findlay a, rennie g, edwards f, spiers j, uren w mla, bregenzer l -
Bendigo Historical Society Inc.
Clothing - MERLE HOULDEN COLLECTION: BABY'S WHITE COTTON NIGHTGOWN, 1885
Fine white cotton round neckline edged with lace. Three lace panels on centre bodice. Long ties are stitched down at the centre of the gown, with an embroidered cotton lace overlay, defining the bodice and skirt. Narrow pleats between the three lace panels, give fullness to the front bodice. Long sleeves are edged with narrow lace, and slight gathering gives the impression of a cuff. A six cm band of cotton lace edges the hemline. Six cm wide band of lace at hemline.costume, children's, night gown -
Bendigo Historical Society Inc.
Clothing - WHITE LINEN LACE TRIMMED CAMISOLE
Wide neckline, rounded at the back, and a deep V shaped front. Short sleeves, edged with a one cm band of scalloped edge lace. This edging also trims the back neckline. Front neckline is trimmed with six cm deep scalloped edge, broiderie anglaise, featuring an embroidered floral design, and cutwork. A casing at the waistline, one cm wide, appears to contain elastic, which is now perished. Machine stitched side seams, which are slightly to the back, rather than at the sides.costume, female, white linen lace trimmed camisole -
Bendigo Historical Society Inc.
Clothing - INFANT'S WHITE LINEN DRESS, 1880-1900
Clothing. Infant's white linen dress with yoke front and back. Round neckline with hem. Skirt tightly gathered onto yoke front and back. Horizontal strip of lace (2.5cm) with open diamond pattern is 7cm above hemline. Hem is edged with 5cm zig zag lace. Dress is sleeveless with arm holes edged with 5cm zig zag lace. Full length back opening fastened with twoX one cm pearl like buttons at upper and lower edges of yoke.costume, children's, infants white linen dress -
Bendigo Historical Society Inc.
Textile - FAVALORO COLLECTION: LINEN TABLECLOTH OR TABLE CENTRE WITH CROCHET TRIM, 1920-30's
Textiles. Cream linen fabric, with a selvedge edge on each side. Three bands of drawn thread work at each end-a centre band 2.5 cm wide, and stitched to form a decorative pattern, and two bands, 1 cm wide-one on either side of the wider band. These are edged with a spoke stitch, which draws the thread into little ''bar shapes" - 3 to each centimeter. A 4.5 cm wide band of fillet crochet and a 20 cm long fringe, edges each end.textiles, domestic, linen tablecloth or table centre -
Flagstaff Hill Maritime Museum and Village
Textile - Lace Sample, Late 1800s to 1930s
The sample of crochet lace is an example of a handmade item that would have been used to decorative purpose around the home. It may have been used to edge curtains, a table runner or a mantlepiece. The Christmas Bells pattern suggests usage as a Christmas decoration.The item is significant socially to show the use of textile crafts, such as handmade crocheted lace, to decorate regular domestic objects around the home such as curtains and mantlepieces.Length of handmade crochet lace. Mercerised white crochet thread has been used to crochet a repeat pattern consisting of three rows: a decorative top row, a middle section of diamond shapes and a bottom row of Christmas bells.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, lace, handmade lace, crocheted lace, decorative edging, decorative lace edging, domestic object, crocheted trim -
Flagstaff Hill Maritime Museum and Village
Textile - Lace Sample, Late 1800s to 1930s
The sample of crochet lace is an example of a handmade item that would have been used to decorative purpose around the home. It may have been used to edge curtains, a table runner or a mantlepiece. The Christmas Bells pattern suggests usage as a Christmas decoration.The item is significant socially to show the use of textile crafts, such as handmade crocheted lace, to decorate regular domestic objects around the home such as curtains and mantlepieces.Length of handmade crochet lace. Mercerised white crochet thread has been used to crochet a repeat pattern consisting of four rows: a decorative top row, a second row composed of diamond shapes, a repeat of the decorative top row and finally a row of Christmas bells to complete the pattern.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, lace, handmade lace, crocheted lace, decorative edging, decorative lace edging, domestic object, crocheted trim -
Melbourne Legacy
Pamphlet, Australian Roses 1974, 1974
Fold-out catalogue and order form for roses. Includes the 'Fraser McLay' (red rose), 'Legacy Jubilee' (yellow edged with crimson), Extravaganza (orange pink) and Endear (salmon pink). 16% of all proceeds of sale of Legacy Jubilee to be donated to Legacy.A variety of rose was named in tribute to Legacy and a portion of sales of roses was donated to Legacy as a form of fundraising.Fold-out catalogue and order form for roses. legacy promotion, fundraising -
Vision Australia
Badge - Object, Association for the Blind purple support badge, 1980s
Purple badge with white lettering 'Association for the Blind' around the outer edge, and a white cane in the middle. These badges were designed to raise some funds for the Association as well as raise awareness among the general public. It has a white sticker on the back '20c'.Round purple badge with white writingAssociation for the Blind badges, association for the blind -
Vision Australia
Badge - Object, Association for the Blind white cane badge, 1980s?
A white cane on a lime green background with the words 'Association for the Blind' written around the edge. The final word is in larger print and on the back of the badges is the price of the badge: 20c. Badges were a way of raising both funds and awareness for many blindness organisations.1 metal pin with white cane on lime backgroundAssociation for the Blindwhite cane day, badges, association for the blind -
Flagstaff Hill Maritime Museum and Village
Domestic object - Sharpening Steel
A honing steel, sometimes referred to as a sharpening steel, whet steel, sharpening stick, sharpening rod, butcher's steel, and chef's steel, is a rod of steel, ceramic or diamond-coated steel used to restore keenness to dulled blade edges. They are flat, oval, or round in cross-section and up to 30 centimetres (1 ft) long. The steel and ceramic honing steels may have longitudinal ridges, whereas the diamond-coated steels are smooth but embedded with abrasive diamond particles. Non-abrasive honing rods such as smooth ceramic or ribbed steel are able to remove small amounts of metal via adhesive wear. In normal use, the rod is applied to the blade at a slightly higher angle than that of the bevel, resulting in the formation of a micro-bevel. The term "hone" is associated with light maintenance performed on a blade without the effort and precision normally associated with sharpening, so the name "hone" was borrowed. In the 1980s, ceramic abrasives became increasingly popular and proved an equal, if not superior, method for accomplishing the same daily maintenance tasks; manufacturers replaced steels with ceramic (and later, manufactured diamond abrasive) sharpening "steels" that were actually hones. Use Honing steels are used by lightly placing the near edge of the blade against the base of the steel, then sliding the blade away from yourself along the steel while moving it down – the blade moves diagonally, while the steel remains stationary. This should be done with the blade held at an angle to the steel, usually about 20°, and repeating on the opposite side at the same angle. This is repeated five to ten times per side. Steeling It is often recommended that steeling be performed immediately before or after using a knife and can be done daily. By contrast, knives are generally sharpened much less frequently. A traditional smooth honing steel is of no use if the edge is blunt, because it removes no material; instead it fixes deformations along the edge of a sharp blade, technically known as burnishing. There has long been speculation about the efficacy of steeling (re-aligning the edge) vs honing (removing minor deformation with abrasives); studies tend to favour abrasives for daily maintenance, especially in high-carbide-volume "stainless" steels (such as the popular CPM S30V steel, which tends to "tear out" when steeled rather than re-forming an edge.) Small honing steel for outdoor activities Usage trends Steels have traditionally been used in the West, especially in heavy-use scenarios (e.g. butchering, where the edge deforms due to forceful contact with bone). These scenarios also lead Western trends toward blades tempered to a lower level of hardness (and thus lower brittleness). In East Asia, notably Japan, harder knives are preferred, so there is little need for steeling intra-day, as the edge does not deform as much. Instead, the blade is honed as needed on a waterstone. While tradition has kept the practice of steeling alive in Western kitchens, the majority of honing steels sold are abrasive rather than smooth, and knives are harder and more frequently made of stainless steel, which does not respond to traditional steeling techniques as well as high-carbon/low alloy tool steels.The sharpening steel is essential to maintain the sharpness of carving and other knives.Steel knife sharpener with bone handle. Part of a carving set.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sharpening steel, carving set, kitchen equipment -
Upper Yarra Museum
Razor, Cut throat
Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang -
Warrnambool and District Historical Society Inc.
Document - Advertising item, Matchbox holder, Early 20th century
James Parker and William McMeekin arrived in 1881 in Victoria and commenced their business a large proportion of which was in Warrnambool. They opened up a butter, cheese and pork export trade with South Australia, which operated successfully for sometime before South Australia altered their tariff duties which badly affected trade. After a period dealing with Queensland, they set their sights further afield to London. The Warrnambool butter Factory was commenced around this time and William McMeekin was closely connected with its establishment. They traded in other farm produce and machinery as well as having interests in land, loans and insurance. William McMeekin was a member of the Town Council for some time and J.P. McMeekin was a member of the Villiers and Heytesbury Agricultural Society and was a director of the Warrnambool Cheese and Butter Factory. They operated their business from different sites in Kepler Street and Raglan Parade.An everyday item with a link to an individuals and a company which had a long association with Warrnambool.Aluminium cover with raised edge shaped to fit around top, bottom and one side. Designed to fit around match box leaving striking edge exposed. Embossed lettering on front and back. Contains matchbox with label depicting shell in green with green and yellow background. Box is faded blue. J.P. McMeekin Produce Merchant Warrnambool Phone 263 on front and back. Prov pat ** 367 on side. warrnambool, p.l. phillips, grocer, provision merchant, nestle warrnambool, nestle dennington, calendar 1919 -
Warrnambool and District Historical Society Inc.
Book, The Holy Bible, 1914
This Bible was given in March 1916 to Private Henry Havelock Rogers (1895-1917), the son of Joseph and Ellen Rogers of Warrnambool. He left Australia in April 1916 as a member of the 14th Battalion (17 Reinforcement Group) and died in France in April 1917 as a result of wounds. The cousins named on the card were the three older children of Arthur and Agnes Rogers, also of Warrnambool. Joseph and Arthur Rogers were brothers. The Bible was found in the MacDonald Street, South Warrnambool home of Bill Rogers, another son of Arthur and Agnes Rogers not born until the 1920s (deceased estate item). This item has a particular poignancy as it was given to a Warrnambool World War One soldier who was killed in action. Perhaps he carried the Bible with him and it was returned to his family after his death. This is a brown leather-covered book of 822 pages. The cover extends over the edges of the pages and has gold lettering on the front cover and spine. The pages are gilt-edged and there are several colour maps at the end of the book. There is a blue ribbon marker encased in the binding. The inscription is on a loose card and is handwritten in black ink. ‘To Dear Harry Wishing Him God Speed & Safe Return From His Loving Uncle, Aunt And Cousins, Rita, Alfie & Charlie’. henry rogers, rogers families of south warrnambool, world war one and warrnambool -
Warrnambool and District Historical Society Inc.
Plate, Hotel Mansions, 1920s
This plate comes from the Hotel Mansions in Warrnambool. This building was opened in 1890 as the Grand Ozone Coffee Palace (a temperance hotel) and was at the corner of Koroit and Kepler Streets in Warrnambool. It was built by a company of local businessmen and leased out. In 1891 the Coffee Palace was granted a wine licence. In 1895 Thomas Randall was the proprietor of the building and it was re-named the Ozone Hotel. The building was closed in 1915 and re-opened in 1920 as the Hotel Mansions. In 1923 the Hotel Mansions became a fully-licensed hotel. In 1929 it was destroyed by fire and the present day Hotel Warrnambool was built on the site. This plate is of considerable significance because it is one of the few items we have from the Hotel Mansions in Warrnambool. The Grand Ozone Coffee Palace/Ozone Hotel/Hotel Mansions was the grandest building ever erected in Warrnambool. Its destruction by fire was a major loss to the city. This is a white plate made of vitrified china (bread and butter plate size). It has a charcoal-black rim around the outer edge and a black monogram and scroll on the outer edge of the plate. There are a couple of small stains on the upper part of the plate and on the base. There is information on the maker and supplier on the base as well as a crown symbol.‘H.M. Warrnambool’ Grindley Hotel Ware England Vitrified’ ‘Loftus Moran Pty Ltd Melbourne’ grand ozone coffee palace, ozone hotel, hotel mansions warrnambool, temperance hotels in warrnambool, history of warrnambool -
Warrnambool and District Historical Society Inc.
Plaque, Galleywood, C 1990
This is one of a series of eighteen plaques which commemorated some of the winner of the Grand Annual Steeplechase which is held each year in Warrnambool. The first Grand Annual was held in 1872 as the Warrnambool Handicap Steeplechase. Galleywood was owned by local people and trained by local trainer Jocka Baillie. Galleywood was a crowd favourite of the 1980's winning two Brierly Steeplechases and the Grand Annual in 1986. This famous local hero died at the age of 30 and is buried at the Warrnambool course and commemorated in the mounting yard. This series of plaques were painted by local artist Leslie Lamey. These items relate to a significant part of Warrnambool's sporting and social history..1 Painted white rectangular tin plaque with rolled edges with painting of jockeys silks and cap. The colours are green front with orange (faded) sleeves with blue band. The cap has pink lines. Six holes are around the edge. .2 Galvanised rectangular brass plate with engraved black text .1 Galleywood written twice on back of plaque. .2 Grand Annual Syndicate GALLEYWOOD. Winner of the Grand Annual Steeplechase 1986warrnambool, grand annual steeplechase, galleywood -
Ballarat Clarendon College
Book, The poetical works of Robert Burns, 1921
Memorial Prize awarded to former CPLC student Minnie Monteith (Dux of school and Head Prefect 1921) by the Melbourne Shakespeare Society for excellence in the 1922 society examination. Item provides intriguing detail to Minnie's academic pursuits following her years of schooling at Clarendon Presbyterian Ladies' CollegeDark blue padded and textured calf binding with gold printing and borders on front cover and spine; gold detail to inside edge of cover; marbled end-pages and gilt edge; hinges generally firm; book plate inside front cover; two pages of handwritten notes included in volume;Book plate inside front cover: Crest of the Melbourne Shakespeare Society / Examination 1922 / E Toynbee Stevens Memorial Prize / Awarded to / Minnie Monteith / Signed by President Long and Secretary Daleyminnie-monteith, melbourne-shakespeare-society, e-toynbee-stevens, book-prize, 1922, -
Bendigo Military Museum
Photograph - PHOTOGRAPH WW1, After 29.2.16 and before 31.12.1916
John George Duncan McInnes came from Lyall in Victoria. He enlisted in the AIF 29.2.1916 as No 5736 in the 6th Batt aged 26 years. He embarked on 3.7.1916 for England. He then transfered to the 59th Batt AIF. In the field he was hospitalised with Broncho Pneumonia and passed away on 31.12.1916. Refer 782.2, 786P.The outer brown frame has very fine markings in small circle arrangements. The centre photo has a frame edge with a flowing ribbon across the top. The centre photo itself is 100mm wide x 150mm high. The image of McInnes is blurred around the edge of the section in the area with white background. 5736, john george duncan mcinnes, 59th batt, aif -
Bendigo Historical Society Inc.
Clothing - BABY CLOTHES COLLECTION: BABY VEST
Salmon pink hand knitted woollen baby vest. Patterned yolk with rib pattern body. Cap sleeves with crocheted edges. Neckline with crocheted edge. Twisted wool tie around neck.This collection of knitted and sewn garments were made in the early 1940s and were intended for a baby that was stillborn.costume, children's, baby vest -
Bendigo Historical Society Inc.
Photograph - FOSTER AND WILSON COLLECTION: PHOTOGRAPH
Sepia portrait of a young woman standing in the garden and holding a flower. She is wearing a dark dress with a white frill around the sleeves and front edges and collar. Her hair is tied in a bun and she is wearing glasses. Photo is mounted on a dark brownish card with indented frame around the edge of the photo.photograph, portrait, female, foster & wilson collection, female portrait -
Bendigo Historical Society Inc.
Clothing - MERLE BUSH COLLECTION: LADIES SCARF
Clothing. Cream coloured triangular ladies silk scarf. Mid blue border on two short sides with pattern of triangles and vine. Cream coloured centre has printed pattern of vines and leaves. Long edge of scarf is a raw edge that has been over locked. Old box 573.costume accessories, female, triangular silk scarf -
Stawell Historical Society Inc
Clothing - Costume and Accessories
Cream Linen Calico Baby’s Night Gown. Made in Magar Style. Lace trimmed neckline with a chain stitched edge. Drawn up with a tape. Edge of sleeve button holed in cream silk. Place for Ribbon button holed. A spray worked in cream silk on front. Mrs Thelma Clark. stawell clothing material -
Bendigo Historical Society Inc.
Textile - Pillow cases
Pair of pin-tucked and cotton lace trimmed pillow cases. Cream linen fabric with a 3.5cm deep scalloped cotton lace on opening edge featuring a floral pattern. There is a ribbon insert of same pattern 6.5cm from the edge. There are four and five rows of pin-tucking either side of insert.favaloro, pin-tucks, cotton lace -
Bendigo Historical Society Inc.
Domestic object - Lingerie Bags
Donor believes works were completed by her great aunt: Lydie, Rosa and Olivia Pollard when sisters were young girls. They were completed in Country Durham England. Works have been passed down through family.Two embroidered laundry bags with scalloped edges one with red flowers and the other with gold flowers. Each has a fold over cover, envelope style with embroidered flowers on a cream background. Scalloped edges are outlined with green and gold stitching with a further row of stitches outlining the pattern of the scalloped edging.P W E embroidered top LH corner Gold Bag- A L 4 embroidered inside top LH corner of red bag late victorian needlework, handmade embroidery, lingerie bag -
Maldon Vintage Machinery Museum Inc
Pump - Centrifugal
Single stage end suction pump with part of casing cut away to reveal interior. Exterior painted grey, interior blue with edges of cut away in red. Bolted to a metal edged, white painted wooden base. Suction branch 100mm, discharge branch 65mm, impeller diameter 250mm. "Titan" in relief on side.machinery; pump; centrifugal; metalwork -
Bendigo Historical Society Inc.
Medal - MEDAL COLLECTION: BOER WAR MEDAL, 1900
Object. Brass coloured medal with hole drilled at top with suspension ring. Obverse: Around edge ''FIELD MARSHALL LORD ROBERTS V.C.'' Picture of Frederick Sleigh Roberts in Uniform. British Commander in the Boer War. Reserve: Around edge ''BRITISH TRANSVAAL WAR 1900''. Picture of Queen Victoria.numismatics, medals - military, boer war medal -
Bendigo Military Museum
Book - DIARY, BENNETTS, Spicers & Defmond Ltd, c.1944
Diary belonging to "Alva Bennetts". Entries cover daily entries for 1944. Part of the Bennetts Collection. See Catalogue No.9726P for details of service for Alva Marie Bennetts. Soft blue coloured Buckram cover with black text on front cover. White coloured pages with cut edges. Red colouring on page edges. Handwritten diary entries in pencil, blue ink and black ink. Text on internal pages in black type. Owner's detail inside front cover.Handwritten diary entries in pencil, blue ink and black ink.bennetts collection, alva bennetts, diary, ww2 -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s, 1905
Yields information about Blackpool electric tramways in the 1880's, a system that was offered to the City of Ballarat by tender.Black and White photograph of ESCo Ballarat No. 1 in Ballarat, soon after opening in 1905, destination sign placed over front dash canopy. Has the driver (Rupert Bowd) at the controls. Has the destination of "Lydiard St Nth". (Rupert should be Robert - see page 138 of Alan Bradley's book, The Golden City and its Tramways) - at the Gregory St terminus. Two copies See Reg Item 6974 for another copy and details of the driver/motorman.Copy 1 - in ink "220) and Ballarat Tramways (Company) along the top edge and a "William F Scott" address label and "WFS Collection" in the bottom right hand corner. Copy 2 - in ink "220) and Ballarat Tramways (Company) along the top edge and "Driver Rupert Bowd B1872, Skipton St. Ballarat".trams, tramways, esco, opening, gregory st, tram 1 -
Bendigo Military Museum
Equipment - WEBBING KIT, Aust Army, 1983-2010
Items in the collection re Craig Triffett. Refer Cat No 5997.5 for his service details.This basic webbing kit is fully assembled. it has the Australian disruptive pattern camouflage. It consists of: Waist belt with padding and shoulder harness. Bum pack, Two plastic water bottles with carriers. 1 x field dressing mounted in a pocket of water bottle. 2 basic Ammo pouches - small. 1 basic Ammo pouch - large. This kit uses plastic snap lock catches.Inside waist belt is a yellow triangle with black texta edges. Inside large Ammo pouch is " Rob981". Inside bum bag is " Triffett".webbing, aust army, triffett