A blue coloured cardboard cover with black information on the front. Top right hand corner reads DSN 7610-66-048-1189. Botton left hand corner there is a white label with 623.262 F4536:B AUS on it. There are two punch holes down the left hand side. The booklet is covered with a plastic cover.australia - armed forces - service manuals, field engineering, booby traps

The blouse was made in Greece about 1945. The method used to create this fine embroidery was to copy a design from a cross stitch embroidery book guided by fine white tapestry threads tacked onto the yolk; when the design was finished, the embroiderer would pull out each fine white tapestry thread until only the embroidery remained around the yolk of the blouse.Throughout the centuries and up until the 1970s-80s, the women of Ithaca spun, wove, embroidered and knitted. Mothers prepared their daughters' 'glory boxes' trousseau (prikia), weaving bedspreads, rag mats (koureloudes) for everyday use, finer wool rugs for formal use, as well as linen sheets, pillowcases, blankets, towels and tablecloths. Linen was also woven to make the mattress that the young brides would take to their future homes. Mothers also wove and embroidered the fabric for their daughters' underwear and petticoats, nightgowns, etc. Sewing of the garments was also done by hand. The girls embroidered handicrafts using various stitches, they crocheted lace, netted pillows and even linen carpets. The handicrafts were usually embroidered by hand in cross-stitch using linen and cotton fabric. At the time there were merchants who travelled to the villages to sell machine made goods for the trousseaus, but most of the dowries consisted of the beautifully crafted work of the women. In the 30's the SINGER Company came to Ithaca and taught the girls sewing on the machine. A handwoven silk blouse. Colour - ecru. Hand embroidered, hand sewn, very fine white tapestry was tacked round the yolk; a gusset was sewn under each short puff sleeve at the armpit; two-tone hand made silk thread cords were passed through the hollow border of the sleeves and neckline.

It took 15 years to invent the can. It took 100 more to invent a standard way to open it. In the 19th century, decades after the invention of canning, there were virtually no can openers. Canned food, such as sardines, came with its own "key" to peel back the tin lid. Birth of the can One of the oddest things about the can opener is that the can predates it by almost 150 years. Though common today, cans were once military-grade technology. In 1795, Napoleon, to whom the phrase "an army marches on its stomach" is attributed, offered 12,000 francs to anyone who could find a way to preserve food. Without any knowledge of bacteria or their role in food spoilage, scientists didn't even know where to begin. It took 15 years before a chef named Nicholas Appert claimed the prize after successfully jarring food. Soon after that, his countryman Philippe de Girard came up with a variant on Appert's method—metal tins—and sold the idea to the British. Spoiled food, and the sickness it caused, was a widespread problem. The public would have benefited from canned food, but for decades cans were almost exclusively for the army and the navy. The canning process, with its hours of boiling and steaming, its scrupulous cleanliness, its heated metal, and its need for a great deal of disposable material, made canned food far too expensive for anyone but the military. No can openers were needed or even possible. The metal of early cans was too thick to make openers practical. Soldiers and sailors had plenty of sharp objects on hand and made ample use of them when they wanted to eat. During the 19th century, the process of canning was refined and mechanised, and the metal wall of the average can slimmed down enough that a civilian could get it open—if that civilian had the right tool. No one had that tool yet, so early cans had to open themselves. In other words, they came with built-in openers. The result was a confusing but pleasing free-for-all, in terms of product engineering. Each type of food came with its own kind of can, and each kind of can came with its own kind of opener. Tinned fish and meat were often sold in rectangular cans. These cans were fitted with a "key" that would roll down the top of the can. Coffee, beans, and other types of meat were packaged in cylinders with metal strips that could be peeled back with their own kinds of built-in keys. Cans of milk, which didn't need to be completely opened, came with puncture devices. As tinned food became more common, its containers became more regular. A nice cylindrical can became the norm, and, as these cans filled kitchens, more engineers put their minds to finding a convenient way to open all of them. The first standalone can opener worked on a simple principle: point, stab, and pull. From the mid-19th century to the end of World War I, the typical can opener looked roughly like a wrench, if the lower 'jaw' of the wrench were replaced with a blade. People used the blade to puncture the top of the can near its edge, push the upper jaw against the side of the can, and drag the blade through the metal along the rim. Because meat was the first and most popular canned substance, these can openers were often shaped to look like cows and given the nickname 'bully beef can openers'. The bully beef can opener, popular in the mid-19th century, resulted in many lost fingers. Bully beef can openers were so common, effective, and sturdy that they are still frequently available on collectors' sites. Some are advertised as “still working,” and every last one of them is, without a doubt, soaked in the blood of our ancestors. Dragging a sharp blade along the edge of a can is certain to cause injury sooner or later. So once people got a reliable can shape and a reliable way to get the can open, the search was on for a reliable way to get a can open without the possibility of losing a finger. The answer came in 1925, from the Star Can Opener Company of San Francisco. This is probably the first can opener that resembles the one people have in their kitchens today. Instead of using a blade to pry open a metal can, buyers could clamp the edge of the can between two wheels and twist the handle of one of the wheels to move the blade around the lip. The Star can openers weren't perfect. Compared to the bully beef model, they were flimsy and breakable, but they probably prevented a few injuries. Six short years after the Star model came to market, the first electric can opener was invented. It was patented in 1931 by the Bunker Clancey Company of Kansas City, who had already been sued by the Star Can Opener Company for trying sell a double-wheeled can opener like the Star model (the case was dismissed). The electric can opener must have seemed like the wave of the future and a sure-fire seller, but it proved to be too far ahead of its time. In 1931 not that many households had electricity, and those that did weren't interested in buying can openers. The Bunker Clancey Company was subsequently bought by the Rival Company, which still makes small appliances like can openers today. It took another 25 years for electrically powered can openers to become practical. In the 1950s, Walter Hess Bodle and his daughter, Elizabeth Bodle, developed an electric can opener in the family garage. Walter came up with the opener's blades and motor, and Elizabeth sculpted the outside. Their can opener was a free-standing unit that could sit on the kitchen counter. The Udico brand of the Union Die Casting Company put it on the market in time for Christmas in 1956 and had great success with it. Over the next few years it came out in different styles and colours, and, like the bully beef can opener, has become a collector's item. Also like the bully beef model, Udico can openers often still work. They don't make 'em like they used to. Although there have been some design changes and refinements over the last sixty years, there have yet to be any more leaps forward in can opener technology. If you're resentfully opening a can, you are almost certainly doing it using the Star design, manually forcing the can between two wheels, or the Bodle design, clamping the can into a free-standing electrical opener. Whether or not you enjoy your holiday meals, at least you can be happy that you are not getting poisoned by your own food or cutting open your hand with the blade you use to get at it. That's something, right?The can opener is still a very important and essential item in most kitchens.Can opener, right handed, metal, upper blade section serrated, inscription 'Peerless Pat.Feb 11-90'.Peerless Pat.Feb 11-90flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cannning, can opener, kitchen equipment

This stool appears to have been home-made. It was used in the days (first half of the 20th century) when cows were mostly milked by hand. It was most likely to have been used to milk a house cow, perhaps in Warrnambool or a nearby town. The cow would have been kept during the day time on the town common and brought back to the home for milking and returned to the common the next day. The production of milk, cheese and butter has been an important industry in the Warrnambool district since the second half of the 19th century, with the Warrnambool Cheese and Butter Factory at Allansford being established in 1888. It is the oldest surviving dairy company in Australia. This stool is of considerable interest as an example of the stools used when cows were hand milked and when many households in the towns and outer areas had a house cow to supply milk for the household. This is a hand-made wooden milking stool with a rectangular piece of wood for the seat and four rounded legs that taper slightly outwards. The legs have been inserted into four holes on the top seating part. The seat has a small circular hole in the middle. The stool is well-worn. dairying in western victoria

Promotional pack created by University of Ballarat, Bachelor of Visual Arts (Graphic Design / Multimedia) third year, graduating students, 2004. "Products of Choice" is how the graduands "collectively believed represented who they are and what they are striving to be." Each of the 24 graduating students designed and produced a suite of 10 badges (240 unique 35mm badges in total), hand assembled on the faculty badge making machine. One of each student's badges was then hand packed into a foam mount within a plastic case. Ie. All 24 students are represented in each limited edition case. Their original corresponding order is outlined on the reverse of the pack. (Note, it is possible badges may have been reordered prior to entering the collection.) Recipients were encouraged to choose and wear the badges. Lecturing staff (third year): Helmut Stenzel, Leigh Whetter, Nic Wai. Students listed: Judd Madden, Bonnie Van De Ven, Andrew Jones, Ben Potter, Arindel Searby, Catherine Martin, Lou Bryan, Zara Costello, Emily French, Agnes Ostrozka, Clare Simons, Daniel Frawley, Angelika Gorna, Elizabeth Walcott, George Bush, Mark Bickerdike, Stacey Dekker, Petreen D'Costa, Nick Oeldrich, Matt Deutscher, Narelle Craven, Sonia James, Alistair Burn, Thomas Jolly.Three cases of a limited edition run of 240 packs, each containing 24 badges. Limited edition pack numbers 217, 221 and 104. Badges printed full colour laserprinted. Pack cover, printed red with edition number hand written in black marker. Back cover in printed black.university of ballarat, federation university, graphic design, multimedia, judd madden, bonnie van de ven, andrew jones, ben potter, arindel searby, catherine martin, lou bryan, zara costello, emily french, agnes ostrozka, clare simons, daniel frawley, angelika gorna, elizabeth walcott, george bush, mark bickerdike, stacey dekker, petreen d'costa, nick oeldrich, matt deutscher, narelle craven, sonia james, alistair burn, thomas jolly., helmut stenzel, leigh whetter, nic wai.

The original postcards in this series (2013.002 to 2013.018) were generously loaned to Williamstown Botanic Gardens by a private collector for copying. The postcards are evidence of the interest the gardens held as a subject for postcard publishers. The text and images provide a snapshot into fashions, social interests and concerns of the time. The professionally produced images provide a pictorial history of Gardens including changing planting styles, various structures and features of the Gardens eg the aviary, cannons, the fountain, the second Curator’s Lodge and gates. The images offer an opportunity to compare garden vistas with the present day. This postcard is evidence of the location of one of the cannons relocated from Fort Gellibrand in 1906. They were removed from the Gardens in the 1960s. These same cannons remain a feature on the Williamstown waterfront in 2013. A sepia postcard depicting a winding path lined with rocks. There is a cannon on the right hand side of the card beneath a spreading palm tree. There is a tall pine and a cypress tree in the background. The cannons were relocated from Fort Gellibrand to the Gardens in 1906. Front: ‘THE ROSE SERIES, P. 1030 THE GARDENS, WILLIMASTOWN, VICTOORIA / copyright’. Reverse: Left side vertical ‘Published by the Rose Stereograph Co. / Armadale, Victoria’. Across the top of the card: ‘POST CARD / The “Rose” Series A Real Photograph / De Luxe Produced in Australia’. There is an image of a rose and stem with three leaves in the centre of the card. In pencil on top right hand corner: $5 [believed to be inserted by the vendor of the card]postcard, gardens, post-card, williamstown-botanic-gardens, hobsons-bay-city-council, garden-path, cannon, rose stereograph, rose-series, 1906

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html) Two men with glasses hold a sheet of paper depicting a nude woman on the facing page. She has long flowing hair and ear rings The number 299 is shown in the bottom left hand corner of the print.Signaturekeith wingrove memorial trust, bookplate, australian bookplate design awards, printmaking, nude

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html) A nude woman stands side-on with her right arm resting on her head. The other hand holds a flower. Books are piled in the background behind her. One book has the number 916 on its spine.Nonekeith wingrove memorial trust, bookplate, australian bookplate design awards, printmaking, nude

Limited edition (#217) promotional pack created by University of Ballarat, Bachelor of Visual Arts (Graphic Design / Multimedia) third year, graduating students, 2004. "Products of Choice" is how the graduands "collectively believed represented who they are and what they are striving to be." Each of the 24 graduating students designed and produced a suite of 10 badges (240 unique 35mm badges in total), hand assembled on the faculty badge making machine. One of each student's badges was then hand packed into a foam mount within a plastic case. Ie. All 24 students are represented in each limited edition case. Their original corresponding order is outlined on the reverse of the pack. (Note, it is possible badges may have been reordered prior to entering the collection.) Recipients were encouraged to choose and wear the badges. Lecturing staff (third year): Helmut Stenzel, Leigh Whetter, Nic Wai. Students listed: Judd Madden, Bonnie Van De Ven, Andrew Jones, Ben Potter, Arindel Searby, Catherine Martin, Lou Bryan, Zara Costello, Emily French, Agnes Ostrozka, Clare Simons, Daniel Frawley, Angelika Gorna, Elizabeth Walcott, George Bush, Mark Bickerdike, Stacey Dekker, Petreen D'Costa, Nick Oeldrich, Matt Deutscher, Narelle Craven, Sonia James, Alistair Burn, Thomas Jolly.Three cases of a limited edition run of 240 packs, each containing 24 badges. Case #217 of 240 is open to display badges. Badges printed full colour laserprinted. Pack cover, printed red with edition number hand written in black marker. Back cover in printed black.university of ballarat, federation university, graphic design, multimedia, judd madden, bonnie van de ven, andrew jones, ben potter, arindel searby, catherine martin, lou bryan, zara costello, emily french, agnes ostrozka, clare simons, daniel frawley, angelika gorna, elizabeth walcott, george bush, mark bickerdike, stacey dekker, petreen d'costa, nick oeldrich, matt deutscher, narelle craven, sonia james, alistair burn, thomas jolly., helmut stenzel, leigh whetter, nic wai.

Limited edition (#221) promotional pack created by University of Ballarat, Bachelor of Visual Arts (Graphic Design / Multimedia) third year, graduating students, 2004. "Products of Choice" is how the graduands "collectively believed represented who they are and what they are striving to be." Each of the 24 graduating students designed and produced a suite of 10 badges (240 unique 35mm badges in total), hand assembled on the faculty badge making machine. One of each student's badges was then hand packed into a foam mount within a plastic case. Ie. All 24 students are represented in each limited edition case. Their original corresponding order is outlined on the reverse of the pack. (Note, it is possible badges may have been reordered prior to entering the collection.) Recipients were encouraged to choose and wear the badges. Lecturing staff (third year): Helmut Stenzel, Leigh Whetter, Nic Wai. Students listed: Judd Madden, Bonnie Van De Ven, Andrew Jones, Ben Potter, Arindel Searby, Catherine Martin, Lou Bryan, Zara Costello, Emily French, Agnes Ostrozka, Clare Simons, Daniel Frawley, Angelika Gorna, Elizabeth Walcott, George Bush, Mark Bickerdike, Stacey Dekker, Petreen D'Costa, Nick Oeldrich, Matt Deutscher, Narelle Craven, Sonia James, Alistair Burn, Thomas Jolly.Three cases of a limited edition run of 240 packs, each containing 24 badges. Case #221 of 240 is open to display badges. Badges printed full colour laserprinted. Pack cover, printed red with edition number hand written in black marker. Back cover in printed black.university of ballarat, federation university, graphic design, multimedia, judd madden, bonnie van de ven, andrew jones, ben potter, arindel searby, catherine martin, lou bryan, zara costello, emily french, agnes ostrozka, clare simons, daniel frawley, angelika gorna, elizabeth walcott, george bush, mark bickerdike, stacey dekker, petreen d'costa, nick oeldrich, matt deutscher, narelle craven, sonia james, alistair burn, thomas jolly., helmut stenzel, leigh whetter, nic wai.

This aluminium kettle was manufactured between 1940 to 1960's and replaced the heavier caste iron "open fire" stove ones (in doors or in the bush). A cast iron flat base between the open fires and the kettle was required. This kettle was used extensively with indoor open fire places. It was part of the evolution in "tea" making kettles. These were the only method of making hot beverages before introduction of electric kettles. For the Kiewa Valley the connection to the major electricity grid was post 1950's.This kettle is significant demonstrating the type of kitchen utensils required before electrical home connections became a reality. The aluminium structure of the kettle was an advancement over the heavier caste iron kettles. This type of kettle is still in use for bush and mountain hikers/climbers due to the light weight. This kettle was used by the Tawonga C.W.A. Branch. The C.W.A. motto "Honour our God, Loyalty to the throne, Service to the country, Through country women, For country women, By country women."This 99% aluminium hot plate kettle with lid (bakelite handle) is Australian made for flat stoves (cooking or room heating). It has a "tea style" spout and a bakelite hand grip(knob) on the top of the lid. The lid has nine ridges (for strength) radiating from the central hand grip. The two handle prongs are bop riveted onto the the body of the kettle. The bakelite hand grip has been fashioned to fit the natural contours of a clutching hand.On both sides of the aluminium handle "HOT PLATE WARE" and covering an oblique shaped triangle "99% PURE ALUMINIUM" and below that "MADE IN AUSTRALIA".Within the triangle "DURALIFE"cwa, homeware aluminium kitchen utensils, made in australia cook ware

The Squirrel is a small to medium sized member of the rodent family Sciuridae. They are commonly located in America, Eurasia and Africa. The Squirrel was introduced to Australia by humans. Interestingly, the tail of the Squirrel serves the purpose of keeping the rain, wind or cold off the body of the animal, to help it cool off in hot weather, to counterbalance when moving and can be utilized as a parachute when jumping from one location to the next. Squirrels consume foods that are rich in protein, carbohydrates and fats. They eat nuts, seeds. fruits and vegetation. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Carolina Squirrel specimen has dark coloured fur with paler colouring on the face and hands. It grasps a nut between its hands and stands on a wooden platform. A paper tag hangs from the right arm with a smaller tag attached to the left. The squirrel has dark black glass eyes and sharp claws on the hands and feet. A.4481 BMM7535 35. Carolina Squirrel / Catalogue, Page, 49 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, squirrel

Smiths were once the largest clock manufacturers in Europe. They produced clocks for the home.Used by a resident of the Kiewa ValleyWhite clock face with black hands and numbers. The seconds hand is red. Electric cord attached at the back with details of makers embossed in the centre circle. The face of the clock is attached to a round tin mantel. It has a white knob at the bottom (for adjusting the hands). The electric wall plug has 3 cylinder shaped prongs (they are not flat). On clock face "Smiths" On the back "Smiths / English clocks" Details re maker, watts etc. embossed on the back centre.smiths clock, wall clock

A cream coloured cardboard cover with black information on the front of the cover. Bottom left hand corner reads Army Headquarters, Camberra ACT. Bottom right hand corner reads Directorate of military training, November, 1965. There are two small punch holes and two metal staples down the left hand side of the booklet.army headquarters, training, information bulletin

A cream coloured cardboard cover with black information on the front of the cover. Bottom left hand corner reads Army Headquarters, Camberra ACT. Bottom right hand corner reads Directorate of Military Training, September, 1966. There are two metal staples down the left hand side of the booklet. The booklet is covered with a plastic cover.army headquarters, training, information bulletin

A blue coloured cardbaord cover with black information on the front. Top right hand corner reads DSN 7610-66-048-1126. There is a handwritten circle in blue ink on the left hand side of the Australian Army Insignia. Details of the booklet are under the Insignia. There are two punch holes down the left hand side of the booklet.australia - armed forces - service manuals, engineer range practices

Willcox and Gibbs: Serial No. 158679. The Willcox & Gibbs Sewing Machine Company was founded in 1857 by James E. A. Gibbs and James Willcox and opened its London Office in 1859 at 135 Regent Street . By 1871 the Company's Chief Office for Europe was at 150 Cheapside, London, this office was later moved (post 1885) to 94 - 96 Wigmore Street, then 37 & 39 Moorgate Street (by 1891 to post 1907) and later 20 Fore Street, London . Right from the initial production the manufacturing of the Company's single thread, chain stitch machine was undertaken by Brown & Sharpe, Rhode Island and this continued up until 1948. A special hand crank mechanism was produced in England for the European market, but the general design of the Willcox & Gibbs remained essentially the same throughout its production. The only major improvement was in 1875 when the glass tension discs were replaced with an automatic tension device which ensured the machine could not get out of adjustment. In addition to the domestic hand and treadle machines the company produced a wide range of industrial models. The Company finally closed in 1973. This Willcox & Gibbs came complete with its wooden carry case. The machine was made in America in the late 1860's but it has the ornate hand crank produced at Coalbrookdale near Telford, England which was, in Victorian times, renown for producing high quality ornate iron castings. This machine has the glass tension discs which were used on domestic models until 1875. The Willcox & Gibbs badge is located on the rear of the base casting and it also has a deep wooden base. The cloth plate has various American patent dates, four dating between 1857 & 1860 relating to J. E. A. Gibbs, three dating between 1860 & 1864 relating to Chas H. Willcox (son of James Willcox), the machine was also licensed under five other patents including the infamous Elias Howe patent of 1846. There are only two English patents one for J. E. A Gibbs and the other for James Willcox. In 1887 a W & G Sewing Machine sold in England for 6 pounds , with its box and bits, at a time when the average wage was less than 10/- shillings per week. The early settlers of Moorabbin Shire had to be self sufficient making their own clothes, tableware, bed coverings, furnishings and equipment. The women were skilled dressmakers and craft workers.Willcox and Gibbs: Serial No. 158679. A single thread, chain stitch Sewing Machine with a special hand crank mechanism produced in England for the European market, and the glass tension discs which were used on domestic models until 1875. This Willcox & Gibbs came complete with its wooden carry case. The machine was made in America c1870 but it has the ornate hand crank produced at Coalbrookdale near Telford, England which was, in Victorian times, renown for producing high quality ornate iron castings. This machine has the glass tension discs which were used on domestic models until 1875. The Willcox & Gibbs badge is located on the rear of the base casting and it also has a deep wooden base. The Willcox & Gibbs badge is located on the rear of the base castingsewing machines, early settlers, pioneers, moorabbin, brighton, gibbs james, willcox james, willcox henry, new york, america, dressmaking, mateial, machine makers, wrought iron work, telford england

Letter card sent by Alf Ferris to his Mother in Terrick Terrick Victoria. Ferris collection, refer Cat No 4183.3PLetter card with fold out colour photos of Weymouth U.K, print on front in black with PO stamp in black, hand written in purple pencil, rear page has hand written letter.On front, “Souvenir Letter Card WEYMOUTH No 11” Stamped, “AIF Camp P.O MY 27 19” (May 27th 1919)letter cards, weymouth

Belonged to Victor Henry Evans No 418655 RAAF. Refer Cat No 1760.4.Notebook with black vinyl cover with hand cut tabs along top of pages. Hand written in ink contains notes on flight paths, coordinates and other information regarding aircraft radios and their use.documents-notebooks-education, military history, communication-radio/telegraphic, raaf

Photo shows stone mason's cottage at Heatherlie Quarry under renovation.Photo shows a stone cottage with two doors. There is iron roofing on the left hand side of the cottage and on the right hand side the roof is missing. There is scaffolding at the front of the cottage. A trailer can be seen on the left.buildings, houses, quarrying, heatherlie

This photograph is part of the Caulfield Historical Album 1972. This album was created in approximately 1972 as part of a project by the Caulfield Historical Society to assist in identifying buildings worthy of preservation. The album is related to a Survey the Caulfield Historical Society developed in collaboration with the National Trust of Australia (Victoria) and Caulfield City Council to identify historic buildings within the City of Caulfield that warranted the protection of a National Trust Classification. Principal photographer thought to be Trevor Hart, member of Caulfield Historical Society. Most photographs were taken between 1966-1972 with a small number of photographs being older and from unknown sources. All photographs are black and white except where stated, with 386 photographs over 198 pages.Victorian Heritage Register (VHR) Number H0490 From the Victorian Heritage Register Database - Citation for Myoora https://vhd.heritagecouncil.vic.gov.au/places/275 (as at 6/10/2020) Myoora, 405 Alma Road, North Caulfield, was designed by Reed, Henderson & Smart and can be attributed to Anketell Henderson. It was built in 1886 and 1887 for Thomas Christian, who had founded the fabled gold mine, the Day Dawn at Charters Towers. He never occupied the house although his widow lived there for some time. The house was subdivided into three and later six flats. Myoora was one of many large mansions on broad acres with gardens in Caulfield. Perhaps the grandest was Labassa. The mansions date from the 1850s through to the late 1890s. The siting of Myoora on a ridge influenced its planning and composition. A central hall and corridor along the ridge is entered from the centre of the more formal north facade. The entrance is marked by an elaborately detailed tower. A stair turret provides a second accent. The western end of the building is completed by a massively detailed chimney as the service wing. The south facade enjoyed an outlook to Port Phillip from a two-storey cast iron verandah. Bay windows, chimneys, the tower and the turret and minor details are brought together in a sophisticated asymmetrical composition. This is reflected in the planning. The asymmetry of Myoora pivoting on the tower is the most notable feature of the building. The walls are built of cement rendered brick. The cement render has not been painted. The roof is slate. The balconies and verandah are cast iron. The footings and cellar are bluestone. The architectural firm Reed, Henderson & Smart was very prominent in Victoria in the nineteenth century. Anketell Henderson was an eminent and well respected member of the profession. He worked successfully in London and interstate as well as in Victoria. They were better known for commercial and public buildings. Myoora is an important private commission. The style of Myoora is a combination of details from the Continental and English Renaissance through the boom style and the Queen Anne style. There is also an early influence from the American Romanesque style especially in the stair turret. The latter style was important at the turn of the century and Myoora is a significant precursor. Other buildings of a similar scale survive in Caulfield and elsewhere. Labassa, the most fabulous, is quite different stylistically as are most of the other comparable mansions. Stonnington is perhaps closer but relies on different details from the Queen Anne style and lacks any American influence. For its historical associations through its owners and architects, for its style and composition and for its intactness, Myoora is significant at a State level. The craftmanship of Myoora is what could be expected of a building of the time and type. It is relatively intact and in fair condition. The main staircase has been removed, minor alterations to decorative features have occurred and additions have been made to the exterior.Page 16 of Photograph Album including three black and white photographs. Two are arranged in landscape orientation on the right hand side of the page with the other photo in portrait mode on the left hand side. Handwritten: views from "Myoora" 405 Alma Road [top right] / Neg 181 Dec 1972 [under left side photo] / Neg 189 Dec 1972 [under bottom right photo] / 16 [bottom right]caulfield north, trevor hart, alma road, mansion, myoora, tower, thomas christian, 1880's, queen anne, cement rendered brick, unpainted, balconies, verandahs, anketell henderson, continental and english renaissance, american romanesque, cast iron balconies, panoramic views, streetscapes, cast iron work, reed henderson & smart, gardens, asymmetrical style, slate roofs, chimneys

Hand tinted photo: 5 girls on horseback - riding towards foreground. Girls have red jumpers and ties and are wearing brown helmets. Photo taken at Marysville. Hand tinted by F.T. Kennedy.F.T. Kennedyperson, group, recreation - horse riding

A large brass ships engine room telegraph on a stand. Written in red is Astern on the left hand side and written in black is Ahead on the right hand side. At the bottom there is a counter recording the speed of the propellerengine telegraph, ran, cerberus collection

Presented to Mrs Love in sympathy on the death of her husbandHand-painted Calligraphic tribute for Mrs. John Dickson Love with black covers. Hand Painted border depicting fruit and scenery. Signed by members of the Goulburn Valley Agricultural, Horticultural and Pastoral Association.Mrs. John D Love. Tatura North August 6th 1892mrs john dickson love, john dickson love, love, goulburn valley agricultural, horitcultural and pastoral association

Two White Handkerchiefs white linen spoke stitched edge with crochet edge. Coloured Hand embroidered corner. Hand crocheted edge. Corner a square of crochet. Mrs E McClure (Dalkin) stawell clothing material

Most likely worn at Wilby and balls around the districtVery pale pink satin skirt overplayed with tulle and net. Round neck, sleeveless bodice with lacy net overlay. Decorated by hand with sequins, diamentes and beads. Zipper at back. Hand made. None

Hand operated washing machine which is operated by a windlass. Also included is a hand rotated mangle with a worm drive and adjustable leaf spring.A gear reduction drive operates either the mangle or the washer.Patented Feb 1860domestic items, laundering

One cream linen tablecloth with drawn thread and hand-embroidered, floral design and 6 matching linen serviettes with a cream, hand-embroidered in satin stitch flower in one corner of each serviette.table linen., table ware.

Black and white copy of original photograph of two boys each wearing long pants and a thick Jacket, hats in hand and boy on right has his hand resting on the other boys' shoulder."George Knight 7/9/1905 and William (Bill) 2/5/1903."george knight, william (bill) knight