Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Document is a Draft Proposal for a Pilot Project to Develop a Databank of Successful Engineering Solutions to Health and Safety Problems. It has been written by Dr Dennis Else, Visiting Fellow, Ballarat College of Advanced Education. Dennis is also a Senior Lecturer, University of Aston, Birmingham, England. The document outlines the need for a databank and often ""our failure to control health and safety problems is from our inability to apply existing knowledge rather than because the knowledge does not exist." The control solutions would need to be technically vetted to ensure feasibility of the solution. An experienced group of specialists in aspects of health and safety and from engineering branches would be required. Ballarat CAE already has this blend of expertise. They have been responsible for the development of Australia's first tertiary course in Occupational Health and Safety and Occupational Hazard Management.Fifty-seven A4 pages - includes 27 pages of photocopied pages from reference books and 11 pages of Curriculum Vitae, Staff.viosh, victorian institute of occupational safety and health, ballarat college of advanced education, dennis else, databank, engineering solutions, draft proposal, visiting fellow, occupational hazard management, occupational health and safety, multidisciplinary team, dulcie brooke, max brooke, gerald fernandez, kathleen kent, peter mccarthy, tom norwood, roy schrieve, bill vermeend, derek viner, derek woolley

A greenish coloured cardboard coer with black information. There is a code near the top right corner which reads WO Code No: 9765. There is a dirty white sticker on the top left hand corner (this covers one of the punch holes) There are three punch holes and two metal staples down the left hand side.australia - armed forces - service manuals, field engineering, mine warfare

A bluish coloured cardboard cover with black information on it. Top of the booklet written in blue texta is the word Library/ Top right hand corner written in blue texta is the number 1. Under this reads W.O. Code No. 8503. In the middle of the cover there is a photo with a show on the shovel, two hands tying a know and some tents in the background. the cover is ripped at the bottom left hand side. There are two metal staples and three punch holes down the left hand side of the booklet.australia - armed forces - service manuals, field engineering, mine warfare

Used in ENG1 classroom for engineering subjects prior to degree courses beginning at the college.Differential model of a manual gear shift and clutch for a car or tractor bolted on to a metal base. Used for teaching in Engineering course prior to the Degree programme which commenced in the early 1980sFormeta Baden-Baden. Hawthorn Audio Visual.arboriculture, teaching, motor, gear shift, clutch, agricultural engineering, engineering, model, differential model

Rail tractors were popular with Victorian sawmillers. They were generally cheaper than a steam locomotive, required no special qualifications to drive, and used proven power plants for which spares were available locally. The tractor was constructed by Day’s Engineering of South Melbourne which, although better known for its pumping equipment, built more than fifty rail tractors for Victorian sawmillers and other industrial tramway users. W. Day & Sons is believed to have constructed its first light railway locomotive in 1926. From then until the mid 1940s, the firm appears to have built at least fifty locomotives at its premises in South Melbourne, of which roughly half were four-wheel locomotives and roughly half were six-wheel locomotives like the restored Day’s rail tractor formerly operated by Ruoak Timbers. Of the four-wheel locomotives, ten were 2-ft (610mm) gauge locomotives similar to this one. Today, only two survive, a complete example at the Puffing Billy Railway Museum at Menzies Creek, and one at Alexandra Timber Tramway Museum This 2-ft gauge 4wPM locomotive is believed to have been one of two Day's Petrol Rail tractors formerly used by Cheetham Salt, possibly at the Moolap works near Geelong. Service History :owned by Cheetham Salt, Moolap ( dates unknown ) Geelong Steam Preservation Society , Belmont 1973 ? Puffing Billy Steam Museum , Menzies Creek Historic - Industrial Narrow gauge Railway - Rail Tractor used by Cheetham Salt Company works at Laverton, Moolap and Geelong, Victoria , Australia Petrol Rail Tractor made of Iron , wrought iron, steel puffing billy, industrial narrow gauge railway, rail tractor, days engineering, cheetham salt,, petrol rail tractor

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Section from B.C.A.E. Yearbook - 1987-1988, copied for students of Risk Engineering 1 (9ES 471) The complete analysis of a risk requires the identification of what causes the event and its possible outcomes. Various examples are described and the possible outcomes that may occur. Worksheets of the three phases are shown Five A4 pages typed. Three sheets have columns to fill inviosh, victorian institute of occupational safety and health, ballarat college of advanced education, risk engineering, risk analysis, cause and effect

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. This is an Occupational Health and Safety Course for RAAF Hygiene Inspectors developed by the Faculty of Engineering at Ballarat College of Advanced Education. "The overall objective of the course is to provide delegates with the basic knowledge and approaches to enable them to diagnose and solve problems in health and safety." The conceptual framework is set out in Figure 1. The detailed syllabus is set out in behavioural objectives. The course goes over five weeks with detailed timetable provided.A4 size booklet with yellow cover. (Staples removed from left edge). 19 pages, timetable pages yellow.viosh, victorian institute of occupational safety and health, raaf hygiene inspectors, ballarat college of advanced education, faculty of engineering, occupational health and safety, diagnose and solve problems

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Request for preliminary approval from Ballarat College of Advanced Education for Proposed Masters Degree in Risk Engineering (Occupational Hazard Management). Outlines the Course Aims, Outline of the Course - Sessions, Mode of Presentation, Relationship to other Courses, Enrolment Levels, Justification for Introduction of the Course. Over the years the College has engaged a number of recognised authorities and people who work in the area of occupational hazard management to work as visiting lecturers. Professor P Compes from the University of Wuppertal, Germany Professor D Klein (Fulbright Scholar) from Michigan State University E Wigglesworth, Executive Director, Menzies Foundation, Melbourne Professor R Vernon from Texas A&R University Dr D Else from University of Aston, Birmingham, UK Five A4 pages -m typed.Signature of Derek Woolley on first pageviosh, victorian institute of occupational safety and health, ballarat college of advanced education, proposed masters degree risk engineering, occupational hazard management, course aims, outline of course, justification for course, professor p compes, university of wuppertal germany, professor d klein, fulbright scholar, michigan state university, e wigglesworth, menzies foundation, director, professor r vernon, texas a&r university, dr d else, university of aston birmingham

A number of items once belonging to shipwright Norman McKenzie were donated to Flagstaff Hill Maritime Museum and Village. They are related to Norman’s apprenticeship and certification as a Shipwright in Belfast, his Union membership and his employment as a shipwright in Melbourne. One of the items, a union Rules Book inscribed with the name H.B. Thomas and dated 1902, had within its pages Norman’s Indenture of Apprenticeship, dated 1941, Norman Desmond McKenzie was born in Belfast in 1925 and lived at 10 Pansy Street Belfast, Northern Ireland. At the age of 16 years, he began a 5-year Shipwright’s apprenticeship with Harland & Wolff Limited, Shipbuilding & Engineering Works, Belfast. He became a member of the Ship Constructors’ and Shipwrights’ Association, Belfast (B) Branch 20. His Registration Number was 38748. He completed his apprenticeship on December 16th, 1946, aged 21 years, his address was 26 Connsbrook Drive, Sydenham, N. Belfast. In October 1949 Norman received Clearance from his Union as a financial member to move to another branch. He completed his Apprenticeship on December 16th 1946. Two months later he migrated to Australia, and he arrived in Victoria, and he became a Financial Member of the Victorian branch of the Federated Shipwrights, Ship constructors, Naval Architects, Ships’ Draughtsmen and Boat Builders’ Association of Australia, Victoria branch. One of Norman’s donated books is the Rules of the Shipwrights' Provident Union of the Port of London. It is inscribed on several pages with the name H.B. Thomas and includes the year 1902 and the address of 29 Brickwood Street, Gardenvale. This is a location in Victoria, Australia. The Victoria Government Gazette, February 1959, in the section “Removal from Registration on The Architects Registration Board of Victoria, during the year ended 31st December 1956” lists “Deceased – Thomas, H.B., 29 Brickwood Street, Gardenvale”. The Architects Union includes Naval Architects and Shipwrights and other related trades came under the same union. It seems likely that when he was in Melbourne, Norman worked as a Shipwright for H.B. Thomas and was given the Rules book by Thomas, perhaps as a reference book or maybe as a gift. Around that same time, December 1949, Norman met his wife-to-be, Daphne, in Melbourne. Daphne had migrated from London with her family and her father found work with the Melbourne Harbour Trust. They married in Melbourne in 1953 and went on to have a family of five children. In 2003 Norman and Daphne moved to Warrnambool and then years later they celebrated their 60th wedding anniversary. Norman passed away on July 28th 2015 at Warrnambool’s South West Healthcare hospital.Norman McKenzie's Rules Book, Union Cards, Indenture of Apprenticeship, and other documents tell the story of a young Irish lad's work and qualifications to become a shipwright and his migration to Australia. The young man found a job and a wife who had also migrated, and they raised a family in Melbourne. He and his wife then retired to Warrnambool to enjoy their later years. The collection of documents relating to Norman McKenzie is significant for its connection with the shipping industry of the early 1900s, the migration of qualified tradesmen to Victoria, and their contribution to the development of Victoria. The collection also shows the role of the Union in the shipping industry. The documents link shipwright Norman McKenzie to the Shipwright's Union in London and in Australia, and to shipbuilder H B Thomas in Melbourne, most likely his employer.Certificate printed on cream paper; Indenture of Apprenticeship, between Norman McKenzie of Belfast, and Harland & Wolff Ltd. of Queen's Island, Belfast on 28th October 1941. The Certificate was donated within the pages of a book, Rules of the Shipwrights' Provident Union of the Port of London published in 1895 and inscribed in 1905 with the name H. B. Thomas. Inscriptions are on the front and reverse of the certificate. There are two red wax seals beside the signatures of John Morrison and Norman D. McKenzie. Handwritten and underlined in red pen, top right of Certificate's front "1499" Printed on the Certificate, employer "HARLAND & WOLFF Limited, of Queen's Island, Belfast, Shipbuilders and Engineers" Handwritten in black pen "Twenty-eighth (day of ) October 1941" "Norman D. McKenzie, 10 Pansy Street, Belfast" "Shipwright Rates of wages as per National agreement" SIGNED: "John Morrison" "William Donald" "Joseph Kenney" "Norman D. McKenzie" Along the right margin "Apprenticeship completed 16th December 1946" In pencil on the reverse "N McKenzie, 26 Connsbrook Drive, Sydenham, N. Belfast" flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, norman mckenzie, norman desmond mckenzie, belfast shipwright, shipwright's apprenticeship, harland & wolff limited, shipbuilding & engineering works, the ship constructors’ and shipwrights’ association, registered shipwright, victorian branch of the federated shipwrights, ship constructors, naval architects, ships’ draughtsmen and boat builders’ association of australia, victoria branch, shipwrights' provident union, h.b. thomas, architects registration board of victoria, naval architect, daphne, norman and daphne mckenzie, indenture of apprenticeship

Glass diamond trophy with a wooden base awarded to Wangaratta High School for winning the 2008 science and engineering Challenge with white text reading:The Science and Engineering Challenge Winning School- 11th April Wangaratta 2008 Presented by Victoria University faculty of Health, Engineering and Science This initiative is supported by the Australian Government through the Department of Innovation, industry, Science and Research

Set of 20 photocopied lists, titled "MMTB Engineering Department - Workshops and Running sheds Branch - Allocation of Tramcars", listing allocation of tramcars to various depots, workshops, storage and disposal. Packet 1 1 - 16/6/1928 - 2 pages 2 - 9/6/1934 - 2 pages 3 - 30/6/1938 - 2 pages 4 - 12/3/1948 (?) - 2 pages 5 - 1/2/1949 - 4 pages 6 - 16/7/1949 - 2 pages 7 - 28/1/1950 - 2 pages 8 - 24/3/1951 - 2 pages Packet 2 9 - 24/1/1953 - 3 pages (one poor copy) 10 - 23/1/1954 - 2 pages 11 - 30/8/1958 - 2 pages 12 - 17/1/1959 - 2 pages 13 - 1/1961 - 2 pages 14 - 1/1962 - 2 pages 15 - 7/1963 - 2 pages 16 - 1/1964 - 2 pages 17 - 1/1965 - 2 pages 18 - 3/1965 - 2 pages Packet 3 10 - 1/1965 - 2 pages 11 - 1/1967 - 2 pages 12 - 1/1969 - 2 pages 13 - 1/1970 - 2 pages 14 - 1/1971 - 2 pages 15 - 1/1/1977 - 3 pages 16 - 1/7/1977 - 3 pages Packet 4 17 - 1/7/1978 - 2 pages 18 - 1/7/1979 - 4 pages 19 - 1/7/1980 - 4 pages 20 - 1/7/1985 - 7 pages - MTA header.trams, tramways, tramcars, mmtb, lists, depots, depot allocation

Glass trapezium shaped trophy with a rough cut top edge presented to Wangaratta High School for participating in the 2009 Science and Engineering Challenge and white writing reading:The Science and Engineering Challenge Participation Award Wangaratta 2009 Presented by Victoria university Faculty of Health, Engineering and Science This initiative is supported by the Australian Government through the Department of Innovation, industry, Science and Research

Glass trapezium shaped trophy with a rough cut top edge presented to Wangaratta high School for participating in the 2010 Science and Engineering challenge. Has white text reading:The Science and Engineering Challenge Participation Award Wangaratta 2010 Presented by Victoria university Faculty of Health, Engineering and Science This initiative is supported by the Australian Government through the Department of Innovation, industry, Science and Research

Glass trapezium shaped trophy with a rough cut top edge presented to Wangaratta high School for winning the 2010 Science and Engineering Challenge. Has white text reading:The Science and Engineering Challenge Winning School 28th April Wangaratta 2010 Presented by Victoria university School of Engineering and Science This initiative is supported by the Australian Government through the Department of Innovation, industry, Science and Research

Alfred Donald Senior studied Electrical Engineering at the Ballarat Schoo of Mines (SMB) between 1927-33. He worked as an Instructor in Electric Welding at SMB between 1932 and 1967 receiving a certificate of Electrical Engineering, and greatly enjoyed his association with SMB as a student and instructor. Senior was an A. Grade Electrical Mechanic (A.M.I.E.I.s Vic and NSW) and was employed at the SEC Elec. Supply Co of Vic 1927-1970. He became Chief Electrical Inspector for the Mid-Western region.Hand embroidered pocket, framed in timber behind glass. The blazer pocket belonged to A.D. Senior who studied Electical Engineering at the Ballarat School of Mines from 1927 to 1933. from 1927 to 1933.On back of frame: "Mr A.D. Senior. Electrical Engineering student 1927-33. Instructor in Electric Welding 1932 - 67. C.E.E. SMB. A. Grade Elec. Mecahnic. A.M.I.E.I.s Vic and NSW. A very pleasant association during these periods. SEC Elec. Supply Co of Vic 1927-1970. C/o D.C. to A.C. and replaced many engines with elec. motors. Chief Electrical Inspector Mid-Western region.embroidery, ballarat school of mines, a d senior, coat of arms

A two page handwritten letter requesting information on studying Engineering at the Ballarat School of Mines. ballarat school of mines, engineering, aslie j. kingston

These plans were used by POW Sawmills, Newmerella, probably owned at the time by Henry's Timber Company. Hec Pow and his father sold the Newmerella mill to Henry Silverberg and Les Grace. The mill is currently owned by Mectec.Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.Eight large plans for various sections of POW's at Newmerella. The plans were drawn up for Bonang Timbers and Bowman.2317.2 - on back in pen "REC 24/9/80" 2317.3 - on back in red pen "INCOMPLETE SET OF PLANS" ; sticker with "Shire of Orbost Compulsory Inspection" 2317.5 - "DODD" in red ink (John H. Dodd Pty Ltd)

These two plans are copies and show drawings for a proposed turntable at the Warrnambool Railway Station and railway crossings at Gilles Street in the Liebig Street precinct. The Warrnambool Railway was opened in 1890 and the Warrnambool Railway Station building was erected a few years later. These plans, being copies, are of minor interest as they show plans of some projects in the Warrnambool Railway Station precinct in the latter half of the 20th century.These are two sheets of cream-coloured paper with plans (copies of original) drawn up in black ink. The drawings are fading somewhat and are faint in places. One sheet (.2) has a piece missing from the top left hand corner. .1 ‘Locality Plan of Rail Crossings Liebig St. & Gillies (sic) St.’ .2 ‘Proposed Turntable Site Warrnambool Railway Station’ plans, warrnambool railway, warrnambool rail turntable