Van 13 NUU - Louvred Truck (11) Untrafficable - Menzies Creek Station Yard VR Service History 15/ 7/1911 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 7 tons Capacity 10 tons Built 1898 - 1911 Number Built 14 In use 5 To be restored None *NUU 13.VA - 15/ 7/1911 NWS Built new - / /1926 - To NU 13.VA - NU 13.VA - / 6/1926 - Modified AC Malco /10/1954 CKT Sold (to) by Stores Branch to P.B.P.S. Purchased by Puffing Billy Preservation Society from Cockatoo for 20 pounds ($40.00). First complete railway truck owned by the Puffing Billy Preservation Society. Puffing Billy Service History or Notes Historic - Victorian Railways Narrow Gauge - Rolling Stock - Louvered VanWooden Louvered Van - Made of Timber on a Wrought iron frame - current condition Untrafficable13 NUpuffing billy railway, pbr, rolling stock , 13 nuu, puffing billy, louvered van, 13 nuu - louvered van, victorian railways, 2'6" gauge, narrow gauge rolling stock

Van 14 NUU - Louvred Truck (11) Untrafficable - Belgrave Station Yard VR Service History 15/ 7/1911 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 7 tons Capacity 10 tons Built 1898 - 1911 Number Built 14 In use 5 To be restored None *NUU 14.VA - 15/ 7/1911 NWS Built new - / /1926 - To NU 14.VA - NU 14.VA - circa 1926 - Modified AC Malco 1/10/1977 - Off Register To E.T.R.B. RS77/4223 Puffing Billy Service History or Notes Historic - Victorian Railways Narrow Gauge - Rolling Stock - Louvered VanWooden Louvered Van - Made of Timber on a Wrought iron frame14 NUpuffing billy, 14 nuu, louvered van, victorian railways, 2'6" guage, narrow gauge rolling stock

DH5 Diesel Hydraulic locomotive The DH class was a class of diesel-hydraulic locomotives built by Walkers Limited, Maryborough for Queensland Railways between 1966 and 1974. In 1966 Queensland Railways tested a Walkers Limited built diesel-hydraulic shunting locomotive. This was later purchased and by 1974 the 73 DH class locomotives had taken over shunting duties in most Queensland yards. They were also used on short distance freight services. With the closure of many freight yards and the move to longer trains withdrawals started in the 1980s. Many were sold for further use on Queensland sugar cane railways. Locomotive's Queensland Railways Service History : Locomotive : DH5 Serial No: 587 In Service : 27/08/1968 With drawn from Service : 7/07/1992 LOCOMOTIVE DETAILS DH class No. originally constructed : 74 No. in service : 2 No. stored : Wheel arrangement : Bo-BoDH Roadworthy weight : 40T Maximum axle load : 10T Tractive effort (85%) Length overall: 33' Height overall : 12' 6 1⁄2" Driving wheel diameter : 36" Date of manufacture :1970 Manufacturer :Walkers Place of manufacture : Maryborough, Queensland Locomotive type : Diesel Hydraulic DESCRIPTION - B-B DH FORMER CLASS AND NUMBER - 8/1968 Built By - Walkers, Maryborough, Queensland Service History Date built - 1968 Original owner - Queensland Government Railways Original gauge - 1067mm Withdrawn - Next owner - State Electricity Commission of Victoria DH5 8/1968 Sold to SECV as CC2, In service 8-1993 Sold to Mackay Sugar CC02 (Ex DH5). CC02 was purchased by Cooks Construction in 1992 and used on the 900mm Yallourn railway in Victoria. Mackay Sugar purchased in 2001. Title Value Status Preserved - Operational Gauge Narrow 2ft 6in (762mm) Owners Puffing Billy Railway Operators Puffing Billy Railway Manufacturer Walkers Ltd - Maryborough, Queensland Builders number 587 Associated locos Renumbered from CC02 Liveries carried VR Blue & Gold Puffing Billy Service History or Notes Date acquired - 2008 Acquired from - Mackay Sugar Mill ? State when acquired - Operational ? Work done - Regauged, overhauled Restored to service - Current State - Operational Historic - Queensland Railways - Diesel Hydraulic locomotive DH5DH 5 Diesel Hydraulic locomotive made of steel and metalDH 5puffing billy railway, dh5, locomotive, cc02, diesel,, queensland railways, diesel hydraulic locomotive dh5, walkers diesel hydraulic

NSWTD Railway Marker OIl lamp, No.1 RA Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil Lamp NSWTD Railway Marker lamp, No.1 RA made of metal and Glass Railway lamp, paraffin, metal/glass/fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870 - 1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTD 1 RApuffing billy railway , pbr, nswtd railway marker oil lamp, no.1 ra

Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps

Carriage Toilet sign Lift the Handle after using closet pan : but not while train is at Platform or in station yardHistoric - Railways - Carriage Toilet signCarriage Toilet sign made of enamel paint on metal Lift the Handle after using closet pan : but not while train is at Platform or in station yardpuffing billy, carriage toilet sign

Model of Victorian Railways Broad Gauge - Dalhouse Station The Models were hand made including electric motors and cast metal by Desmond Henry Ramsay over 40 years - from the age of 15 ( 1930 ) until his death in 1970. The locomotives and carriages are all replicas of Victorian Railways Broad Gauge. The Dalhouse Station and station yard were inspired by victorian railways design. This Model of Victorian Railways Broad Gauge was kindly donated to the Puffing Billy Railway Museum by the family of Desmond Henry Ramsay - Elwyn Stankiewicz - Vanessa Bourke - Roger Ward. (plaque afixed on case)Historic - Hand made Model of Victorian Railways Broad Gauge by Desmond Henry RamsayModels of Victorian Railways Broad Gauge rolling stock - Hand Made - plastic and cast metal puffing billy, victorian railways, model railway, o scale, desmond henry ramsay

One man lost his life during the building of this bridge. The bridge was constructed by the Victorian Railways between 1927 to 1929 to carry a new double track goods line. This enabled trains from all parts of the state except Gippsland to have direct access to the Tottenham marshalling and sorting yards. These yards were constructed in the 1920's to relieve congestion in the Melbourne Yard near Spencer Street station. The congestion was being caused by the construction of suburban passenger platforms associated with the electrification of the suburban railway network. Initially the bridge was for goods trains but during the Second World War it was also used by troop trains. When the standard gauge line was built in 1962 all trains to Albury and Sydney have used this route, thus avoiding travelling through Essendon and Pascoe Vale on the suburban tracks. The standard gauge track across the bridge took the place of one of the broad gauge tracks so broad gauge trains crossing the bridge in either direction have to now use the same track. The bridge is 1,257 feet (383.13 metres) long and 180 feet (54.86 metres) above the water level. It is just 63 feet (19.2 metres) short of a quarter mile in length between abutments. There is a similar bridge on the same railway line crossing the Moonee Ponds Creek between Gowenbrae and Glenroy, however it is smaller at 1060 feet (323.08 metres) length and 115 feet (35.05) height.The bridge is now Victorian Heritage Registered under Number: H1197, and Heritage Overlay Numbers HO5, and HO107. On the Heritage Register it is named RAIL BRIDGE (ALBION VIADUCT). According to the Heritage Report the bridge is scientifically and architecturally important because of its large size, and because of the cost effective design features such as two girders per span (one for each track), the K bracing in the towers, and the broad flange beams as columns. When it was being built it was the largest trestle bridge in Australia, and until the Sydney Harbour bridge was constructed it was the highest railway bridge.Five B&W yellowing photos showing stages of construction of the Maribyrnong River Viaduct known as the Trestle Bridge but mainly known locally as the QUARTER MILE BRIDGE. It is a railway only bridge which runs over the Maribyrnong River between Sunshine North and Keilor East. A sixth image, which is not part of this set of photos, is included to show what the completed bridge looks like.

At the time of sale, the last of the Hirst family to work in the mill located in Geelong gave Donald (donor Bruce's father) Doherty a set of scales that had been used by several generations of Hirsts and adapted by them over time for specific use in their mill. These Scales were saved from waste and being thrown away at the time of sale to remain in use in the industry in the hands of someone who knew how to use them. The scales were used in calculating the weight of cloth and simultaneously calculating the amount of yarn required to weave it following the instructions printed within the box. The box bears the signatures of two Hirst family members, one being Lewis Hirst dated at 1898. The original brass pole has been replaced with a replica metal somewhere throughout the years after the brass pole broke through use. Hirst was brought by McKendrick in the 1960s and these scales sat for 12 months as part of the 12 month "cooling off" period. The scales were then handed to Donald rather than being disposed of.Scales used for weighing and calculating weight and thread count of textile samples. Originated from Godfrey Hirst Mills in Geelong. Writing describes how to utilise scales. Scales are made from brass, pole for holding scales once brass now replaced with metal pole. Scales held inside wooden box with black text in ink depicting use of scales on paper located inside and outside of box.Outside of box. Wording: APPARTUS for TESTING the WEIGHT per YARD of CLOTHS & COUNT of YARN from a small SAMPLE. -------------------------------------------------------------------------------------------------------------------------------------------------- Indispensable to Manufactures, Merchants & handling Woollen, Worsted, Cotton, Linen, Jute, Hemp, Flannel, Felt, Army, Navy, Police, Railway, Sail & other Cloths -------------------------------------------------------------------------------------------------------------------------------------------------- USED IN GOVERNMENT DEPARTMENTS -------------------------------------------------------------------------------------------------------------------------------------------------- The apparatus consists of Scales, Weights, 1, 2 & 4 sq. inch Cutting Templates & Book of Tables --------------------------------------------------------------------------------------------------------------------------------------------------By weighing a small Sample the accurate Weight in Ounces of a yard of Cloth any width from 18 to 64 inches, the Weight per Square Metre in Grams, the Counts* of Warp and Weft, and the approximate length of full & short ends of pieces of fabrics, [without unrolling and measuring for stocktaking & other purposes] can be ascertained without any Calculation --------------------------------------------------------------------------------------------------------------------------------------------------Price in United Kingdom, 25s., Carriage Paid. Price to Canada & U.S.A. $6.75 do. H. Lord. 10, And Place, Bradford, England. --------------------------------------------------------------------------------------------------------------------------------------------------*When ordering, state on what system you base your YARN COUNTS. Inside of box. Wording: DIRECTIONS FOR USE --------------------------------------------------------------------------------------------------------------------------------------------------TESTING WEIGHT OF CLOTHS. Place sample to be tested on a piece of cardboard, put a Cutting Template on it, cut card and cloth round template with scissors and weigh it according to instructions given in Book of Tables. TESTING FOR YARN COUNTS. Cut out 1 square inch of cloth, draw out wrap or weft threads, according to which is being tested, and the number of inches so drawn, that balance respective weight is the approximate Count. The same rule holds good when number of inches are drawn from a bobbin. In testing from the cloth, allowance has to be made for loss or gain in the process of manufacture. Weight marked C is for Cotton Counts " " W " " Worsted " " " WS " " Woollen Skeins " " L " " Linen Counts. The weights for testing samples of cloth are 20, 10, 10, 5, 3, 2, 1, grains in brass & '5, '3, '2, '1 [tenths of a grain] in aluminium. Inside of box. Signtures, handwritten: Bottom right: Lewis Hirst !898 Top Left (Smudge ?) W Hirst !935godfrey hirst, hirst family, textile design, textile creation

Navarre Rail Station 1922. Frank Woodford Station Master transport, railways

Navarre Rail Yards looking North 1959transport, railways

Navarre Rail Yards Turntable 16 December 1953transport, railways

Navarre Rail Yards Sawmilling 1940'stransport, railways

Sawmilling 1940's J Morristransport, railways

Rose Series P1647 Same as 2978-3transport, railways

Railway pickup of Charcoal Fyans Creekcharcoal, charcoal burner, railway, transport

Collection of reproductions issued by the Public Record Office in 1978. Comprises: Allotments in the Black Forest, 1857; Township of Dandenong, 1856; Township and suburban allotments, Gisborne, 1857; Storing Yard allotments near the Melbourne Wharf, 1854; Town lots near the Railway Terminus, Melbourne, 1863; Parish of Prahran, 1853; Township of Sandridge, 1855; Township of Sunbury, 1857; River Yarra Yarra at the Queens Wharf, 1860.victoria. public record office, black forest, victoria, dandenong, gisborne, melbourne wharf, railway terminus, spencer street, melbourne, prahran, sandridge, sunbury, queens wharf

Parletts owned and operated a timber yard near the railway station in the late 1800s to early 1900s. Parlett's store was situated in Audley Street opposite the wheat silos. Ada Parlett, W. J. Parlett's niece is a concert pianist.Black and white portrait photograph, mounted on cardboard, of William James ParlettOn verso: "William James Parlett. Rutherglen"parlett family, william james parlett

Parletts owned and operated a timber yard near the railway station in the late 1800s to early 1900s. Parlett's store was situated in Audley Street opposite the wheat silos. Ada Parlett, W. J. Parlett's niece is a concert pianist.Photograph of Parlett's Store, Rutherglen with Mr W.J. Parlett and Mr Bob Ready standing outside store, black and white, mounted on thick beige card.On verso: "Elderly man = W J (Bill) Parlett, Rutherglen - a prosperous man. Father of Florie who also worked in her father's timber business and understood timber measurements. Florie remained single and died in Rutherglen."parlett, parletts store, w j parlett, audley street, bob ready, william james parlett

Black and white postcard showing a photograph of the Rutherglen Railway Station.Message on back: "Dear Mother. Am sending parcel by rail to Windsor Railway Stn by this mail. Love from Eve. Hope you get it safely." "Just going down to Auntie Mats. Writing in shop. Love Eve"railway stations, railway yards, trains

Black and white postcard showing a photograph of the Rutherglen Railway Station. This one is an enlarged photographic duplicate of 449.9arailway stations, railway yards, trains

Rutherglen Timber Yards were located in Audley Street, near Railway Station. WJ Parlett was the proprietor for some years.8 black and white photocopies on paper, printed from photographs taken at Rutherglen Timber Millrutherglen timber mill, timber, timber mill, parlett

Rutherglen Timber Yards were located in Audley Street, near Railway Station. WJ Parlett was the proprietor for some years.One of 8 black and white photocopies on paper, printed from photographs taken at Rutherglen Timber Millrutherglen timber mill, timber, timber mill, parlett

Rutherglen Timber Yards were located in Audley Street, near Railway Station. WJ Parlett was the proprietor for some years.One of 8 black and white photocopies on paper, printed from photographs taken at Rutherglen Timber Millrutherglen timber mill, timber, timber mill, parlett

Rutherglen Timber Yards were located in Audley Street, near Railway Station. WJ Parlett was the proprietor for some years.One of 8 black and white photocopies on paper, printed from photographs taken at Rutherglen Timber Millrutherglen timber mill, timber, timber mill, parlett

Rutherglen Timber Yards were located in Audley Street, near Railway Station. WJ Parlett was the proprietor for some years.One of 8 black and white photocopies on paper, printed from photographs taken at Rutherglen Timber Millrutherglen timber mill, timber, timber mill, parlett

Rutherglen Timber Yards were located in Audley Street, near Railway Station. WJ Parlett was the proprietor for some years.One of 8 black and white photocopies on paper, printed from photographs taken at Rutherglen Timber Millrutherglen timber mill, timber, timber mill, parlett

Rutherglen Timber Yards were located in Audley Street, near Railway Station. WJ Parlett was the proprietor for some years.One of 8 black and white photocopies on paper, printed from photographs taken at Rutherglen Timber Millrutherglen timber mill, timber, timber mill, parlett