The Kraft Walker Cheese Co Pty Ltd entered into an agreement with Warrnambool Cheese and Butter Factory Company in 1935 whereby the Kraft company leased premises from WCB. This arrangement remained in place until the 1990s. WCB took over the Garvoc factory in the 1920s. It became outdated and was eventually demolished.Black and white photograph showing timbered building with iron roof and turned wooden finial on the gable end. There are three timber ventilation ducts on the roof. The gable end has sign Kraft Walker Cheese Co Pty Ltd Garvoc Branch. A concrete block addition is at the front. A tray truck with milk cans is in between the main factory building and the outbuilding.garvoc, allansford, dairy industry, food manufacture, kraft walker cheese company, factories, cheese, kraft foods ltd, transport, milk cans

Caulking is the traditional technique used on wooden vessels built with butted or clinker-built planks to fill the gaps between these planks while still allowing the wood to flex and move. This involved driving the irons, hammered in with the mallet, deep into the seams to open them up. After this, spun yarn, oakum (hemp) or cotton was driven deep into the gaps. The hemp or cotton was soaked in creosote or pine tar to make the joins watertight. Caulking also played a structural role in tightening up the hull or deck by reducing the longitudinal movement of the neighbouring planks. The subject item was made by Alexander Mathieson & Sons but the company was established in 1792 when John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker”. In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over by Mathieson and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. In the 1851 census, Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his father's name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, but it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764.  In the Company's later years both Thomas's sons, James Harper and Thomas Ogilvie were involved in the continuing life of the firm. James followed in his father's footsteps in becoming a local public figure. He was appointed Deputy Lieutenant of the County of the City of Glasgow and was made a deacon of the Incorporation of the Hammermen of Glasgow in 1919. His brother Thomas Ogilvie was recorded as a tool manufacturer and employer in the 1911 census. Thomas Ogilvie's son Thomas Alastair Sutherland Ogilvie Mathieson was born in 1908 and took a rather different approach to engineer, however, by becoming a racing driver. In 1947 he wed the French film actress Mila Parély. The firm had won many awards at world fairs for their goods. At the Great Exhibition, London, 1851. Prize medal for joiners' tools in the class of Cutlery & Edge Tools, Great London Exposition, 1862. Prize medal honoris causa. International Exhibition, Melbourne, 1880. Gold medal International Exhibition of Industry, Science and Art, Edinburgh, 1886. Prize medalThe firm Alexander Mathieson & Sons were one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide. The subject item is of further significance as it gives a snapshot of the technological development of sailing ships and their operation before steam-powered vessels took over around the world. Tools such as the subject item demonstrate the traditional craftsmanship and skill of the shipwright and the aesthetic quality of the timber ships designs of the time. Caulking tool Off-set. Stamped on blade "Mathieson & Son Glasgow" also stamped in handle, James S Steele tool box.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, james s steele, caulking iron, caulking tool, offset caulking tool, alexander mathieson & sons, shipwrights tools, ship building, clinker hull caulking, sailing ships

This guillotine is a hand operated machine specifically designed to cut through multiple sheets of paper or card. It has a very heavy and sharp single blade knife mounted between vertical guides or runners. The main users of a machine like this is in by the printing and publication binding industry. Book binding companies use a guillotine to evenly trim the pages of a book after it has been bound. The way the guillotine is used is - paper or card is stacked squarely on the flat table and pushed firmly against the back guide - the handle below the table at the front of the machine is wound around, which brings the back guide forward, pushing the paper stack forward and positioning the centre of the stack below the vertical frame - the upper wheel is wound around, which brings the clamp and firmly in position on top of the paper, to hold it very firmly - the large wheel on the side of the machine is turned around to lower the long sharp blade down onto the pages and cut them through. The sharp edge of the blade is protected somewhat from becoming blunt; a block of wood sits in the table under the stack of paper An early model of a guillotine was patented in 1837 by Thirault, who built a model with a fixed blade. Guillotines similar in principal to this one were patented by Guillaume Massiquot in 1844 and 1852. Over the years many improvements have been made and operation has moved from man power to electricity. Oscar Friedheim Ltd. was the importer and wholesaler of a large range of machinery and equipment for the printing and bookbinding industry. He sold most of his equipment under his own name. On this guillotine or paper cutter he refers to the origin of the guillotine’s manufacture only as “German Manufacrure”. A reference book “Commercial Bookbinding: a description of the processes and the various machines used" by Geo. Stephen, 1910, recommends Oscar Friedheim, amongst others, for the supply of “reliable cutting machines for hand or power”. It also recommends Oscar Friedheim’s for a wide range of other printing machinery and processes. OSCAR FRIEDHEIM LIMITED, LONDON Oscar Friedheim Ltd. was established in 1884 and operated from Ludgate in London. The company was an importer and wholesale supplier in the 1880’s, offering machinery and equipment for the printing and packaging industry for the UK and Ireland. The company became incorporated in 1913. An advertisement of 1913 includes a telegraphic code plus two telephone numbers for Oscar Friedheim Ltd and invites readers to call at the Ludgate, London, showrooms to see the machines working. The company later became Friedheim International Ltd. The book titled “Friedheim, A Century of Service 1884-1984 by Roy Brewer, celebrates Oscar Friedheim’s achievements. Friedheim International currently operates from Hemel Hempstead, on the northern outskirts of London UK. It promotes itself as “… the leading supplier of finishing, converting and packaging machinery to the printing, graphic arts, and highly varied packaging industries in the UK and Ireland. The company’s policy is simple – “employ the best people, work with the best equipment manufacturers in the world, and treat our customers as partners!” The company still sells guillotines. The guillotine is significant for its ability to represent aspects of the printing trade in Warrnambool and in a typical port town circa 1850 to 1910. It represents communication methods and processes used in the time before electrically powered equipment became common in industry.Guillotine (or paper cutter), hand operated. Metal framework with vertical guides, stand and metal mechanical parts including wheels and gears. Table with back guide; handle below front of table winds to move the back guide. A wheel at top of machine winds to adjust pressure of the clamp on the work on the table below it. The cutting blade fits between vertical guides; a timber insert in the table below the blade helps minimise the loss of sharpness of the blade. A handle on the side of the machine turns a large spoked wheel, which rotates a large gear, causing the blade to move up and down. Makers details are on a small oval plaque with embossed maker’s details is screwed onto main body. Maker is O Friedheim, London, and the machine is of German manufacture, circa late 1880’s.Maker’s plaque inscribed "O. FRIEDHEIM / London / German Manufacture"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, printing machinery, printer’s guillotine, paper guillotine, paper cutter machine, oscar friedheim ltd london, friedheim international ltd, bookbinding industry, printing industry

Colour photographindustries, brougham street, autobarn, repco, timber flooring showroom

A quadrant mounted telescope with crosshairs and external focussing, with longitudinal bubble level. Mountable on a magnetic compass plate with two bubble levels. Complete with dapered-spigot base plate and slot view attachments, Housed in a polished timber box. Inside the box are two labels -A label on the inside of the box " to the School of Mines and Industries, Ballarat" To (...) Hoadley, Esq, Principal, Footscray Technical school, Footscray WII" "Sluggish Needle, 9/4/3..." "still sluggisg 1966"mining, ballarat school of mines, surveying, archibald hoadley, scientific equipment, circumferential, scientific instruments

Nobel Industries Limited was founded in 1870 by Swedish chemist and industrialist Alfred Nobel for the production of the new explosive dynamite in the United Kingdom. Ardeer, on the coast at Ayrshire, was chosen for the company's first factory. Between 1877 amd 1926 it was known as Nobel’s Explosives Company Limited. The business later diversified into the production of blasting gelatine, gelignite, ballistite, guncotton, and cordite. At its peak, the factory employed nearly 13,000 men and women. In 1926, the firm merged with Brunner, Mond & Company, the United Alkali Company, and the British Dyestuffs Corporation, creating a new group, Imperial Chemical Industries, then one of Britain's largest firms. Nobel Industries continued as the ICI Nobel division of the company. Small black timber box with small screw holding back on, and leather handle on top. A pivoted needle remains vertical as box angle changes. Graded scale behing top end of needle. Two adjusting points at top.No 10070nobel, ballarat school of mines, scientific instruments, galvanometer

Used by students attending surveying classes at the School of Mines & Industries, Ballarat.Surveyor's level caste in metal with brass trimmings. Features external focus, twin inclined vertical crosshairs with stadia wires. With ray-shade clinomenter. Three levelling screws. Without transverse level (mounting provided). dust shield for object. Features glass lens x 2. Timber carry case features dovetailed joints, separate lid attached to body of case with two brass piano hinges along back side. Case has a metal carry handle screwed to each end. Matches tripod Item 4116 Item's serial number: 99142*The timber lid of the carry case has 'L3' painted on it in white paint. *The paper label glued to reverse side lid of inside carry box reads: STANLEY'S PATENT LEVELS AND THEODOLITES No.99142 July 1899 STADIA POINTS SET=1 : 100. In taking readings of a distant staff by means of the subtense points in the diaphragm, read every 1/100 foot (or metre) on the staff as being equal to one foot (or metre) of distance from the centre of the instrument adding to the reading of plus constant of 18 3/4 inchess from any distance shown. W.F. Stanley, Great Turnstile, Holborn, London. *The paper label glued to lower edge inside lid of carry box reads: N. H. SEWARD, "Optical House" 457 BOURKE STREET (Near Queen Street) MELBOURNE *Engraving on brass plate encompassing the catch on front edge of the timber carry case reads: H&C L (inside an engraved heart on LSH) EUCHRE LEVER (engraved on RHS of brass plate) *Maker's mark is engraved along the length of the telescope barrel: 99142 Stanley. Great Turnstile Holborn, London. level, theodolite, surveying instrument, surveying, scientific instruments

Henry Moritz taught at the Ballarat School of Mines.Marquetry in at least 4 timbers with the words Ballarat School of Mines and industries worked in dark timber.henry moritz, marquetry, ballarat school of mines

In 1883 the Ballarat School of Mines made some changes in order to make better use of the services of the teachers and to extend "as far as practicable the special educational advantages already afforded" by the School. One of the changes was the introduction of a three years course of training under the professors to qualify students for the following three professions: Analyst and Metallurgist, Electrician, and Geologist and Mining Surveyor. The Council was to confer the distinction of Associate. (Warren Perry, The School of Mines and Industries, Ballarat, 1984, p77) Students who took single subjects or pursued such courses as those for certificate of either mine manager or assayer were not required to pass an entrance examination. Students who wished to qualify for an associateship in once of the courses were expected to have a general education of matriculation standard and to have attended all the prescribed courses of instruction unless they were able to produce to the satisfaction of the School's Board of Examiners evidence of having attained elsewhere the degree of proficiency which was required in any particular subject or subjects. (Warren Perry, The School of Mines and Industries, Ballarat, 1984, p177) Ballarat School of Mines Associateships have been conferred since 1894 on candidates who had passed the prescribed examinations in one or other of the following three courses: Geology, Metallurgy and Mining engineering. Each of these three courses had an additional, but optional, fourth year of study. The prescribed subjects of study for an Associateship were set out in 'The Calendar of the Ballarat School of Mines' in each year. (Warren Perry, The School of Mines and Industries, Ballarat, 1984, p177)A number of timber boards with gold lettering. The list names in date order of when they became an Associates of the Ballarat School of Mines.ballarat school of mines, ballarat school of mines associate, associate of the ballarat school of mines, lonie, jennifer drummond, jill blee, jilian norton, zig plavina, associate boards

The Gurley enterprise was established in 1845, first as the partnership of Phelps & Gurley and in 1852 as W. & L. E. Gurley. William Gurley and his younger brother Lewis E. were both engineering alumni of Rensselaer Polytechnic Institute, in Troy, NY, and brought to the business a hunger for technical innovation and unrivaled marketing skill. Exposure at the Centennial Exposition in 1876 launched the company into international prominence from which it never fell. The brothers built a factory in 1852 that operated in departments, each department turning out different components, which were then assembled. This revolutionized the industry which, to that time, operated as small shops making, essentially, individual instruments. Gurley was able to roughly halve the price of their instruments over those of their competition, while maintaining quality. (https://www.gurley.com/history)A timber box of 30 lantern Slides.astronomy, lantern slides, gunn's, w. & l.e. gurley

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Students would have attended Ballarat College of Advanced Education. Timber framed colour photograph of eighteen people with name plate at the bottom.Typed name plate with names of everyoneviosh, viosh australia, victorian institute of occupational safety and health, andrew barnard, robert brown, alan channon, brian emerson, frederick garner, murray giles, james hatfield, roy hegney, ronald mansfield, anthony payne, george robottom, robert sutton, ballarat college of advanced education

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders in the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. Federation University VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree – on the basis of extensive work experience and knowledge.Brown timber framed photograph of VIOSH students in Fiji. The banner behind the students includes the University of Ballarat with logo and Fiji Ministry of Labour, Industrial Relations and Employment. viosh, viosh australia, victorian institute of occupational safety and health, fiji ministry of labour, industrial relations and employment, university of ballarat, steve cowley, ocupational health and safety

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders in the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. Federation University VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree – on the basis of extensive work experience and knowledge.Brown timber framed photograph with title and names of students underneath.Framer - Creative Framing Galleryviosh, viosh australia, occupatonal health and safety, williw anakai, chris dickinson, samual edmara, sarah ekali, anna irla, henkel fred, tommy iru, robert kiapranis, jim kire, joe koison, fabian mamare, gavera mea, paul mori, jeffrey olara, graham peters, pam pryor, joseph rangan, tata savara, levi takua, steven yatukoman

This painting shows a historic depiction of Australian whalers in action at sea, and shows the scale of man to whale. Whaling was one of the first industries in early Victoria. John Dollery was born in London in 1933. As a child he loved to draw and was a frequent visitor to the National and Tate Galleries. In 1957 Dollery came to Australia, settling in Queensland in 1965. After receiving a prize in a drawing exhibition, he began painting in oils, and is entirely self-taught. Whilst in Queensland he painted most of his canvases strictly from life and in 1977 he moved to Melbourne where he established himself as a full-time artist. John was very interested in Australia’s history, and most of his work represents this theme. Many of his pieces are in collections both in Australia and overseas. Dollery’s daughter is also an artist and has exhibited both her father's and her own works together in an exhibition 'Now and Then, Father and Daughter'.The painting is a significant work by artist John Dollery. Its subject of whaling shows an early Australian industry and shows the scale of man to whale. The decorative frame is appropriate for the era in which the scene would have taken place.Painting in oil on canvas, in gilt carved timber frame. Seascape, depicting a whale hunt. A spouting whale is behind a whale boat with six whalers aboard. A tall ship with seamen aboard is behind the whale. Two other tall ships and another whale boat are in background. An embossed plaque in bottom centre of lower frame has inscription.. Artist is J. Dollery. Stamped on the sticker “John Dollery / ARTIST / Crown Lot 16 The Esplanade Corinella, Victoria 3984 / Telephone: (056) 78 0644 “ Hand written on sticker “THE CHASE $xxx” Embossed in the wooden frame “30 / ART / Specturm” Signed “J DOLLERY”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, whales, whaling, industry, whale oil, blubber, john dollery, the chase, corinella, historic art work, australian art work, australian historic artwork

Pipe ready to be put in ground, white van with passenger side door open on the left, pipe is being held aloft using timber and tyres, piece of pipe on ground to right of trench, white van has generator or compressor attached at the rear, centre background at top shows residences with vehicles parked at front, left shows a station wagon parked beneath the trees.Kodakorganisation, industry, gas and fuel

Mandurang School Centenary, September 1977. Espress Print, Bendigo. 24 pages. Photographs and illustrations. With IndexMr G Pearce, Mr J Sloan, Mr K O'Brien, Mrs, J Frenchschool, centenary, mandurang, history of mandurang state school and district, industries, wine, milk, gold, tannery, look-out, timber, hotels, water race, floods, post office, sports, churches, fire brigade, school opens 1877, head teachers, mothers club, education

Arthur Magee, Timber Merchant Bridge Street Sandhurst invoice dated March 13th 1885 issued to Mrs Walder for the purchase of 3 tins of paint, brush and one and a half pints of turps. Illegible signaturebendigo, industry, hardware sales, arthur magee. paint prices 1885

Bendigo Timber Co Cnr Williamson & Mollison St Statement No 206 A dated 1st March 1952 issued to Mr R Mitchell Kennewell St White Hills. Various hardware items amounting to £23/11/2bendigo, industry, hardware sales, bendigo timber co. mr r mitchell. 1952 hardware cost

Fragmented Bendigo Timber Co Cnr Williamson And Mollison Tph 218 Statement No 704 dated 1st April 1952. Various hardware items including cyclone gates amounting to £35/8/0 issued to Mr R Mitchell Kennewell St Bendigo.organisation, industry, sale of equipment, bendigo timber co cnr williamson st and mollison st. mr r mitchell. 1952 cost of hardware.

From the Victorian Heritage Register statement of significance H0791 The Marmalake/Murtoa Grain Store, originally the No.1 Murtoa Shed, is located within the Murtoa Grain Terminal, adjacent to the grain elevator tower and railway line. The shed is 280m long, 60m wide and 19m high at the ridge with a capacity of 3.4 million bushels. The hipped corrugated iron roof of the shed is supported on approximately 600 unmilled hardwood poles set in a concrete slab floor and braced with iron tie rods. These poles are the reason for use of the term "stick shed". With its vast gabled interior and the long rows of poles the space has been likened to the nave of a cathedral. An elevator at one end took wheat from railway trucks to ridge level where it was distributed by conveyor along the length of the shed, creating a huge single mound of grain. Braced internal timber bulkheads on either side took the lateral thrust of the wheat, and conveyors at ground level outside the bulkheads took wheat back to the elevator for transport elsewhere. Wheat had been handled in jute bags from the start of the Victorian wheat industry in the mid nineteenth century. Bulk storage had been developed in North America from the early 1900s. NSW began building substantial concrete silos from 1920-21. In Western Australia, farmers' co-operatives, who had to supply their own bulk storage from 1934-5, pioneered the use of low-cost horizontal sheds of timber and corrugated iron for bulk storage. Following its establishment in 1935 the Victorian Grain Elevators Board (GEB) planned a network of 160 concrete silos in country locations, connected by rail to the shipping terminal at Geelong. By the outbreak of the Second World War there was a worldwide glut of wheat, and Australia soon had a massive surplus which it was unable to export. Only 48 silos had been established under the Victorian Silo Scheme so far, and wartime material and labour restrictions prevented progress with this scheme. The storage deficit had become an emergency by 1941 as Britain obtained its imports from North America, rather than over the lengthy and difficult shipping route from Australia. In 1941 the GEB, under chairman and general manager Harold Glowrey, proposed large temporary versions of the horizontal bulk storage sheds already in use in Western Australia. The proposal was approved by the Victorian Wheat and Woolgrowers Association, who considered the use of shed storages as a longer term proposition. After initial resistance from the Australian Wheat Board, some of whose members represented wheat bagging interests, the Commonwealth and Victorian governments agreed to split the costs, and Murtoa was chosen as a suitable site for the first emergency storage. The main contractor, Green Bros, commenced work on the No.1 Murtoa Shed in September 1941, deliveries of bulk wheat began in January 1942, and the store was full by June of the same year. In the following years the Council for Scientific and Industrial Research (later CSIRO) conducted valuable research and experiment on the impacts and control of insect pests at the Murtoa No.1 shed. With these discoveries, and the development of more effective pesticides, use of the No.1 shed and the larger No.2 shed, erected in 1942/43, continued for many years. The No.2 shed was demolished in 1975. By the 1990s, pest resistance to pesticides and requirements for both pest free and insecticide free grain rendered open storage of this type unviable. The No. 1 store was also becoming increasingly expensive to maintain, and its use was phased out from 1989.Image of the Marmalake/Murtoa Grain Store which is of historical, architectural, scientific (technical) and social significance to the State of VictoriaDigital colour image of the interior of the Marmaduke . Murtoa grain storage facility better known as the Stick Shed. The shed was constructed in World War Two to store grain. The supporting columns are trees.marmalake, murtoa grain store, wheat store, stick shed, murtoa

This photograph on an iPhone 4 during the Museums Australia (Vic) Conference at the National Wool Museum, Geelong. Since the arrival of sheep with the First Fleet in 1788, the wool industry has dominated our economy, our agriculture and our reputation as a quality wool-growing nation throughout the world. Geelong is a city synonymous with wool and the wool industry – sheep farming began here in 1835 and the first of many woollen mills opened here in 1868. For many years the city was known as the 'wool centre of the world'. Two hundred years later, in 1988, the National Wool Museum was established as Australia’s only comprehensive museum of wool. (Since the arrival of sheep with the First Fleet in 1788, the wool industry has dominated our economy, our agriculture and our reputation as a quality wool-growing nation throughout the world. Geelong is a city synonymous with wool and the wool industry – sheep farming began here in 1835 and the first of many woollen mills opened here in 1868. For many years the city was known as the 'wool centre of the world'. Two hundred years later, in 1988, the National Wool Museum was established as Australia’s only comprehensive museum of wool. (Since the arrival of sheep with the First Fleet in 1788, the wool industry has dominated our economy, our agriculture and our reputation as a quality wool-growing nation throughout the world. Geelong is a city synonymous with wool and the wool industry – sheep farming began here in 1835 and the first of many woollen mills opened here in 1868. For many years the city was known as the 'wool centre of the world'. Two hundred years later, in 1988, the National Wool Museum was established as Australia’s only comprehensive museum of wool. (http://www.geelongaustralia.com.au/nwm/about/article/item/8cbcc313afa77a5.aspx)Photograph of a timber lectern used to auction wool in Geelong. It is found in the auction room on the top floor of Geelong's national wool museum.wool, geelong, auction, auction room, national wool museum

This photograph on an iPhone 4 during the Museums Australia (Vic) Conference at the National Wool Museum, Geelong. Since the arrival of sheep with the First Fleet in 1788, the wool industry has dominated our economy, our agriculture and our reputation as a quality wool-growing nation throughout the world. Geelong is a city synonymous with wool and the wool industry – sheep farming began here in 1835 and the first of many woollen mills opened here in 1868. For many years the city was known as the 'wool centre of the world'. Two hundred years later, in 1988, the National Wool Museum was established as Australia’s only comprehensive museum of wool. (Since the arrival of sheep with the First Fleet in 1788, the wool industry has dominated our economy, our agriculture and our reputation as a quality wool-growing nation throughout the world. Geelong is a city synonymous with wool and the wool industry – sheep farming began here in 1835 and the first of many woollen mills opened here in 1868. For many years the city was known as the 'wool centre of the world'. Two hundred years later, in 1988, the National Wool Museum was established as Australia’s only comprehensive museum of wool. (Since the arrival of sheep with the First Fleet in 1788, the wool industry has dominated our economy, our agriculture and our reputation as a quality wool-growing nation throughout the world. Geelong is a city synonymous with wool and the wool industry – sheep farming began here in 1835 and the first of many woollen mills opened here in 1868. For many years the city was known as the 'wool centre of the world'. Two hundred years later, in 1988, the National Wool Museum was established as Australia’s only comprehensive museum of wool. (http://www.geelongaustralia.com.au/nwm/about/article/item/8cbcc313afa77a5.aspx)display of wool ales at the National Wool Museum. Steel girders holding up the roof were made by Dorman Long & Co. Middlesborough, England. In the foreground is a timber counter with brass kick rail and upper edge. Names on wool bales include Austop, Arcadian Wool, Buln Gherin, Mt Hesse, Melrose, Avondale Hills, Kerrsville, Kooringa, Merryville Yass, Sherra Park, Wurrock, Hazeldean, Buanogor Parkwool, geelong, wool bail, auction room, national wool museum

Photograph of an early family, the Sheppards, by their early industrial building, the brewery, in Buninyong, c1870.Significant example of early Buninyong industry, original bluestone building.Mounted B/W photograph of Buninyong Brewery c1870. Bluestone block, brick and timber building with tall round brick chimney nearby. Sheppard family in front of brewery, depicted M,M,M,F,M, with good clothing detail.buninyong brewery, brewery, buninyong, industry, building

Victorian Railways Institute - The VRI was formed in 1909, and started operations at the 3rd Floor, Flinders Street Station, on 31 January, 1910. The Commissioners of the day saw a need for a Social Organisation, where Railway Staff could come together and discuss common issues, and relax in a friendly environment. The VRI was also, for many decades, the Primary Educator of all Rail Staff in their Duties and Tickets, from Train Crews, Station staff and the like, through to the Accounting Office team, everyone was trained at the VRI on how to do their jobs in the VRI. At the height of its power, the VRI would lead a member base of 30,000+ Families, all who would have a dedication to the Rail Industry and VRI. Throughout the State, Centres started, the earliest in 1916 in Ballarat, through to the later ones in Sunshine (1962) and beyond.Historic - Victorian Railways Institute Notice BoardV.R Institute Notice Board made of painted timberV.R Institutepuffing billy, victorian railways institute, notice board

PART OF CORKOAK TREE FROM SMALL STAND OF CORKOAK TREE GROWING AT MT. BECKWORTHSPECIMEN OF PIECE OF CORKOAK TREElocal history, rural industries, timber