Showing 262 items
matching bobbin
-
National Wool Museum
Machine - Cap Spinner, 1925
This cap spinner squeezes the thread under the stationary cap and winds them onto the bobbin. Spinning transforms tops into yarns. The tops are pulled out into fine strands known as rovings. They are then twisted to bind the thread together to give the yarn greater strength. The yarns are wound into differently shaped tools. They are then sent off for weaving and knitting.Cap spinning machine.weaving, knitting, cap spinning, cap spinner, machine, textile industry, factory -
Kew Historical Society Inc
Accessory - Tape lace collar, 1890-1910
One of a group of items including lace and crochet collars and pelerines, a jabot, a chid's dress and a wedding dress donated by KHS member, Kathryn (Kate) Gwynne Reeve (nee Marx) that belonged to members of her family. Tape lace is either a hand made (with a bobbin) or a machine woven tape. The tape is folded into the required design and then fixed and embellished with connecting lace or embroidery stitches of various kinds.Tape lace collar. L 17 cm / W 39 cm / Circumference 98 cmaccessories, tape lace, lace collars -
National Wool Museum
Machine - Wrap Reel
Wrap reel manufactured at Valley Worsted Mill and possibly used in the laboratory. "Wrap reels were used to check the yarn count in a spinning mill. A set length of yarn was wound off several test bobbins and weighed, if the weight was not the correct amount expected the spinning machines draft could be re calculated and the machine draft wheel ( cog ) changed to achieve the required count". - Greg AldridgeA small hand operated wrap reel. The reel is on a wooden base, the winding mechanism is metal and turned by a wooden handle. There is a metal plaque on the base inscribed MAKERS VWM. A wood and metal yarn feeder has broken off its mount.MAKERS/ VWMtextile machinery textile production weaving, valley worsted mill valley worsted mill, warping machinery, textile machinery, textile production, weaving, wrap reel, skein winder -
Churchill Island Heritage Farm
Clothing - Lace Trim
Torchon lace, also known as ‘beggars’ lace is one of the simplest forms of bobbin lace. This lace trim length (3cm x 65cm) which was hand made, is off-white in colour. The thread used is thicker than that used on the finer needlepoint laces and was originally worked in linen although cotton was also used. Due to its strength and softness it was favoured to be used as a trim on undergarments.The Amess family owned Churchill Island from 1872 to 1929length of lace trim, off-white colour; hand-made Torchon (duster) lace; used on underwearchurchill island, lace, janet amess lace collection, amess, trim -
Flagstaff Hill Maritime Museum and Village
Surgical wire, early 1900's
This spool of surgical wire was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Spool containing fine, flexible lengths of surgical wire from the W.R. Angus Collection. The wire has no sign of corrosion. There is more than one length of wire wound around this bobbin and the wires are of different thicknesses. The spool is clear plastic with four holes moulded into each end. Once part of Dr T.F. Ryan's medical practice. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, surgical wire, spool of surgical wire, dr angus, dr ryan, medical equipment, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, medical history, medical treatment -
Bendigo Historical Society Inc.
Clothing - MAGGIE BARBER COLLECTION: LACE COLLAR SQUARE SHAPE, Late 1800's early 1900's
Clothing. Rectangular in shape, the collar has a square profile at front and back. Cream linen Brussell's bobbin lace, with an all over small daisy ( 1.5 cm diameter ) design. Rounded at the neckline, with one opening, probably at the back of the neckline, the collar is 14 cm deep. Outer edge is scalloped - 3.5 cm wide scallops.costume accessories, female, large lace collar square shape -
National Wool Museum
Griswold stocking knitting machine, c1890 - 1900
The machine was most recently used by donor's father c2008 to knit socks, but had been used for many years earlier. According to family history, it is believed that the machine came to Australia with donor's grandparents in the early 20th century, and was created c1890-1900. It is still in working order and a demonstration was given by the donor during the acquisition process.Griswold stocking knitter machine. Black steel manual machine which clamps on to the edge of a table and is operated by turning a handle. Centre of machine is a cylinder which can be lined with pins to create the sock/stocking. Two detached parts of the machine include a bobbin holder and yarn feeder. Accompanying items include: 3 examples of incomplete attempted socks made by donor. 4 envelops containing instructions, pattersn, notes and advice on using the machine, created by donor's father and grandfather. 1 bobbin with grey yarn. 2 metal machinery pieces. 2 tins containing pins for the machine. 1 metal yarn feeder cone. 10 weights plus two weight stands. Stocking knitter machine has an identifier plate with patent numbers on the side. -
Churchill Island Heritage Farm
Textile - Lace Trim, Section
This is an interesting insertion piece with machine made copies of bobbin made ‘spiders’ which could be highlighted by ribbon insertion. The eyelets are placed so that the inserted ribbon covers the plain areas and is highlighting the decorative spiders and the fagoted edging would be revealed. This would be another lovely embellishment for baby’s clothes and accessories such as cradle trim, pillows and pram coverings. It would also be highly suitable for the clothing, undergarments and bed linen of children.The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women.Machine embroidered section of lace trim with recurrent geometric motifsjanet amess lace collection, lace, churchill island, amess, machine, embroidery -
Flagstaff Hill Maritime Museum and Village
Domestic object - Sewing Machine & case
Sewing machine, Singer, hand operated by crank handle, rounded wood case with lock on one side. Machine has hinges at back and recessed accessory compartment containing pins and needles. Machine has shuttle bobbin. Singer Trade Marks gold transfers on lid and machine, with Singer badge on front of machine. Serial Number "F1841984" on front right. Serial Number "F1841984" on front rightflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, singer, singer sewing machine, dressmaker, taylor, domestic machines -
Churchill Island Heritage Farm
Clothing - Lace Trim
Here we have a generous length of a bobbin lace (2.5 x 298cm). Half of the lace next to the selvedge is diamond shaped net with spiders interspersed at regular intervals while the top edge alternates between crosses and a segmented citrus design reminiscent of Valenciennes lace. It was finished with a delicate scalloped edge. This style of lace was never used for fashionable clothing but was suitable for bed linen, lingerie and the fichu (the outer scarf worn over a woman’s shoulders)The Amess family owned Churchill Island from 1872 to 1929length of white lace, Half pattern is net, other half is alternate four petal flowers and six petal flowers. Scalloped edge.churchill island, lace, janet amess lace collection, amess, trim -
Churchill Island Heritage Farm
Clothing - Lace Piece
This length of machine made lace could only be made on either the Raschel or the Leavers machine, however the Raschel only produced an hexagonal ground, therefore we must lean towards the Leavers machine. The pattern in the piece is a copy of a bobbin lace with a plaited octagonal ground. The Leavers machine could reproduce all sorts of grounds, it was very versatile and operated from the mid 19th century until the present day. This lace is quite fine and would look lovely as a trim on a fichu or mob cap.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries.length of machine lace with repeating 'spoked wheel' designs, trimmed on one side with a scalloped edgechurchill island, lace, janet amess lace collection, amess, machine -
Whitehorse Historical Society Inc.
Craft - Sewing and Embroidery Threads
Five embroidery threads in skeins of shades of yellow (2) and green (3). One large wooden spool with small amount of brown thread. One Coats 60 thread bobbin lace white on a wooden reel. One Sylko 24 beige thread on wooden reel. One small wooden reel with no labels and pink thread. One ball of DMC 12 Perle thread in pale pinkCoats - J & P Coats 1000 Beste Qualitat meter vier fach Spezialertzeugnis fur fabrikanten 60. Dewhurst's Sylko Machine twist 24 Silk Substitute Shells. DMC Coton Perle 12 Made in France 10grams 141 yds. Anchor Soft Embroidery Fast Colour 110m/10.9 yd. Lesh & Handsley Perline Mercerised cottons . Sylko Trademark Embroidery Shade no 13 Made in England Silk Substitute J Dewhurst & Sons (Skipton) Size A color 334 -
Churchill Island Heritage Farm
Textile - Lace Piece
This lace appears to be a beautiful product of the Leavers lace making machine. It is Valenciennes in style which is a bobbin lace characterized by the diamond shaped net. Unlike comparable Mechlin lace it does not have a gimp thread outlining the pattern. Valenciennes lace originated in France but perhaps due to religious persecution later moved to Ypres in Belgium and was very popular in the 18th century. It was simpler to produce than Mechlin lace and was never used on expensive garments but reserved for bed linen, lingerie and the fichu. By the 19th century it was made by machine which made it cheaper and even more accessible.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Machine made Valenciennes lace with a floral design on a fine mesh background, and one scalloped edge.lace, churchill island, janet amess lace collection, amess, machine -
Bendigo Historical Society Inc.
Document - Y.M.C.A. Y'S WORKBOX, DISPLAY & DEMONSTRATION OF UNUSUAL CRAFTS, 28 October 1984
Events, Y.M.C.A., Y's Workbox, Display & Demonstration of Unusual Crafts, Sunday October 28. 1984, at the YMCA Stadium, Mundy Street, Bendigo, 10am-5pm.Crafts including; Bobbin Lace, Marquetry,Tatting, Leadlighting,Vietnamese Wood Carving, Decoupage,Model Vintage Cars,& Tanks,Embroidery,Pen Etching,Material Mats, Ribbon Flowers,Wooden ''Dummies'',Machine Embroidery, Candlewicking on Calico,Wooden Dolls, Porcelain Dolls, & many more. C.Marrone.C.Marroneevent, exhibition, bendigo y.m.c.a. -
Bendigo Historical Society Inc.
Clothing - MAGGIE BARBER COLLECTION: LARGE LACE COLLAR, Late 1800's early 1900's
Clothing. Very large, deep, linen lace collar.- Brussells Bobbin lace. Six large ''tear-drop'' shapes - 8cm long, enclose a delicate floral design. Thirteen daisy like flowers are spaced around the outer edge, along with leaves and smaller flowers. The long neck - edge is edged with a leaf - like design lace. This collar may have been worn over an evening gown with a deep back neckline.costume accessories, female, large lace collar -
Churchill Island Heritage Farm
Clothing - Lace Trim
This is a beautiful example of Irish crochet lace edging featuring the Clones knot which gives the picot appearance on the bars. Clones knots are made by twisting the crochet hook backwards and forwards many times and working into the same stitch then pulling a loop through and fastening it at the beginning of the knot. Irish crochet comes in many forms and at first glance this lace looks like a bobbin made torchon lace. It is very fine and the thread used is most likely a No. 60 cotton or finer. Being handmade this lace would have been quite expensive and the owner would have wanted it to be seen.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries.length of handmade lace, with reinforced edges and a repeating, abstract motif reminiscent of buds.churchill island, lace, janet amess lace collection, amess -
Flagstaff Hill Maritime Museum and Village
Domestic object - Sewing Machine, Early 20th century
Ward Brothers (George and Samuel) registered a company (Australian Sewing Machines Limited Pty Ltd) with the head office address in Errol St, North Melbourne, and Prahan. The earliest newspaper advertisement for this company was in 1897. Around this time the Ward Brothers first imported sewing machines from England and Wertheim placed their decal on them and mounted them in their own Australian made cabinets. David Ward later imported machines from Beisolt & Locke in Germany and registered name A.N.A. (All Native Australian), his shop was in Collingwood Melbourne. Some of these machines had Ward Brothers decals on them as well. The three brothers sold under the same name as Ward Brothers. The early Ward Brothers logo had a map of Australia with a picture of all three brothers on it. In 1911 all three of the Ward Brothers decided to share a stall in the yearly Melbourne exhibition. The A.N.A was the machine that got rave reviews. It was at this time that the Australian Sewing Machine Company Pty Ltd decided to add the A.N.A logo to their logo to cash in on the new found celebrity status that the A.N.A has gained. To cut a long story short. David Ward took his brothers to court to prevent this from happening. This was a long drawn out affair that took quite a few years. The settlement was decided out of court and nothing was disclosed of the deal that was made. David seemed to have left the scene, then the remaining Ward Brothers and A.N.A. combined and then became “Wardana”. There are many Ward Brothers sewing machines in displays, they originated from Japan, England, America, and Germany. It seems that where ever they got the best deal for sewing machines or parts is the direction they went. This is where the Bendigo sewing machine company came into the picture. All imported sewing machines into Australia drew a government tax. Bendigo Cording's Traction Company was given proposed two-pound tariff protection that gave the company a significant price advantage for its machines. As a result, the Ward Brothers purchased a huge number of Bendigo shares to get cheaper machines for their sewing machine cabinets. Ward Brothers then placed one of their company officials on the Board of “Bendigo Sewing Machines Limited” and the rest is history. Ward Brothers had shops Australian wide and in most of the major country towns. History for “Bendigo Sewing Machines Limited” Cordings Traction Company owners (H. Keck MLC, W. Wallace, and W. Ewing) operated their business out of the former W. Webb & Co. building in Queen St. Bendigo. Around 1923-1924 they decided to switch from traction engines to manufacturing sewing machines. The actual date is not known but that year's financial report made note of both Cordings and Bendigo Sewing Machines Limited. The switch was made with the government of the day agreeing to a tariff of two pounds per head for every machine head made completely in Australia. The change from traction engines to sewing machines went well. Government representatives visited the factory in Bendigo to inspect and ensure that the sewing machines were Australian made as a result they agreed on granting the two-pound tariff to the company. After the first 12 months, they built 30, the following 12 months the company had produced 1500 machines probably due to the involvement of the Ward brothers. However, the government proposed a new condition to the tariff agreement which was that the company must produce 20% of Australia's requirements for sewing machines. In 1924 after having had produced 1500 machines resulting in reaching their financial limit for tariff support. According to the government, the requirement was 15,000 machines for the next year had to be produced to qualify for the tariff. The company had already reached its production limit and unfortunately folded. There were several attempts to regain government assistance to save this new industry but it was to no avail. Even a promise to open another factory in Sydney was offered but unfortunately wasn't accepted. An item fabricated in Australia from a majority of imported parts from either Germany, America or England giving a snapshot into the early manufacturing industries that were operating at the time of Federation. Sewing machine, treadle, in timber cabinet. Branded Ward Bros, A.N.A., Australian Sewing Machine Coy. Decorative carved timber cabinet, hinged, fold-out laminated timber top and five drawers; two small on each side with handles and one long, shallow, between side drawers without handle. Thread is on bobbin in a rocket shuttle (both in good condition) plus spare empty shuttle (rusty). Brass ‘Half Yard’ ruler inlaid across front, measuring scale in inches and centimetres. Two metal shuttle cover plates (or throat plate / slide plate); front one is impressed with a gauge for needle and thread. Gold trim and decals on flatbed and machine front and back, serial number under shuttle cover, brand on decals and on round metal plate on back of machine. Front right of machine has a bobbin winder. Treadle belt shows signs of wear and laminate on timber machine cover is peeling slightly.Decal coat of arms on right front of machine: kangaroo on left, man with broad-brim hat, holding pick-axe on right, in centre, top “SEWING MACHINE / THE / A. N. A.” then below it, the rising sun, then below that is state of Victoria shield with the Southern Cross constellation. Wheat sheaves around edge on left and flowering plant on right. Gold ribbon banner at bottom with script “WARD BROS.“ Decal of map of Australia on flatbed of machine. States and capital cities are marked and named (no northern territory), portrait of two men. In centre of map are interwoven letters “A. N. A.” and written in script “WARD BROS.” Decal across front of machine body has large, decorated gold lettering “A. N. A.” Decal across the top of machine “THE AUSTRALIAN SEWING MACHINE COY. PTY. Ltd.” Steel shuttle cover at front has an impressed gage listing cotton and needle sizes and number of stitches. Brass disc on back of machine “A. N. A.” in centre. Brass ruler across front of machine has carved or pressed words in the timber. In centre “INCHES” above ruler and “CENTIMETRES” below ruler, and on right above ruler is “HALF YARD” Decal across back of machine’s body “A.N. A. / MADE IN U.S.A.” Stamped into metal under shuttle cover is “219415” (2 and 5 are partially there, first 1 could instead be a 7) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ward bros., australian sewing machine co., a.n.a., treadle sewing machine, rocket shuttle sewing machine, home industry, clothing, wardana, australian sewing machine company, all native australian, dressmaking, clothing manufacturer -
Churchill Island Heritage Farm
Textile - Bed Jacket, Cuff, 1860
This is a fine cotton bed jacket decorated with beautiful whitework embroidery. Whitework is any type of embroidery where the threads worked are the same colour as the base fabric. It is usually worked on white linen but this could be worked on Hardanger fabric which is 22 thread count cotton. The embroidery is a combination of types but drawn thread work and Hardanger work can be clearly seen on this garment.The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women, see above.Bed Jacket with open frontPackaged with note: "Limerick lace bed jacket Janet Amess 1860 from Kel Bright collection with separated cuff".janet amess lace collection, lace, churchill island, janet, amess, bed, jacket, cuff, garment, clothing, princess, machine, bobbin -
Bendigo Historical Society Inc.
Clothing - MAGGIE BARBER COLLECTION: DARK CREAM SILK AND LACE HANDKERCHIEF, 1800's
Clothing. Deep cream silk centre piece, with scalloped edges - 18 cm x 16 cm. (Scallops 6.5 cm wide). Cream linen bobbin lace - (probably Brussells Lace) surrounds the silk-9cms deep at each corner, 3.5 cms deep at the sides. Fan shapes woven in the lace, emphasize the scalloped centrepiece. Flowers as in 11414.26 and 11414.30a and b, would suggest that this lace has been made by the same maker. Silk centrepiece is damaged, with some splitting of fabric.costume accessories, female, dark cream silk and lace handkerchief -
National Wool Museum
Spinning Wheel
Part of the Zakrzewski Collection of spinning wheels donated to the National Wool Museum by Mr Wlodzimierz Zakrzewski. For many years, Mr Zakrzewski collected, researched and repaired spinning wheels from all over the world. This spinning wheel is Australian and is made from Queensland Kauri pine. It dates from c.WWI and was designed by someone inexperienced in spinning wheel design, but who was able to solve the problems encountered in an innovative way. For instance the flyer and bobbin mechanism were made from the sort of bits and pieces that would have been found laying around a workshop. The wheel was acquired from a private home in Glen Iris, from the owner who knew nothing about it.Spinning Wheelhandicrafts - history, spinning wheels, highlights of the national wool museum: the zakrzewski spinning wheel collection - exhibition (28/07/2001 - 02/12/2001), zakrzewski, mr wlodzimierz -
Churchill Island Heritage Farm
Textile - Lace Trim
This is another machine lace made using a thicker crochet-like thread, quite possibly cotton judging by the texture. The geometric pattern has been made in the style of Torchon lace and it gives the appearance of softness and comfort. This lace is quite narrow (1.1cm) and was not made as an insertion lace but as a trim. It was most likely used as a trim on children’s underclothing and bed linen. It may have been used as a trim on a mob cap for a maid or a less senior member of the household. This machine made lace would have been made on a Barmen machine which was developed in Germany in the 1890s and was capable of making perfect copies of Torchon and other simple bobbin laces.The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by three generations of Amess women - Jane, Janet and Unity. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island.Torchon machine lace, coarse crochet like thread. One fairly straight edge with picots. Other edge has clusters of elongated picots at even intervals. Geometric pattern insidechurchill island, lace, janet amess, lace collection, torchon -
Churchill Island Heritage Farm
Textile - Crochet
This small hand crocheted motif is a classic example of Irish crochet. It has been made to look like bobbin lace with the diamond shaped ground but with delicate picots resembling Clones knots and the flower design made with half trebles and trebles. It appears to be one motif of a series to be attached to a fabric to form a decorative edging. The hypotenuse of the triangle has plain loops for attachment whereas the other two sides have the scalloped edges with picots/Clones knots. Irish crochet was developed in the mid-19th century by the Ursuline nuns in County Cork but was soon being taught in every convent in the country. It was taught to women to give relief from poverty.The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women.Small triangle piece of Irish crochet.janet amess lace collection, lace, churchill island, janet, amess, hand, crotchet -
Churchill Island Heritage Farm
Textile - Lace Piece
This piece is a beautifully preserved machine made copy of Valenciennes style lace as can be seen from the diamond shaped ground. This would have been made on the Barmen machine which was developed in the 1890s in Germany from a braiding machine. Its bobbins imitate the movements of the bobbins of the hand-made lace maker and it makes perfect copies of the simpler hand-made laces. It can only make one width at a time and does not have the pattern potential of the Leavers machine. Valenciennes was a lace making town on the French- Flemish border which in 1780 had 4000 lace makers but due to the revolution of 1789 the number was reduced to 250. It was initially Flemish but was claimed by the French, however the centre for Valenciennes lace eventually diverted back to Ghent and Ypres in Belgium. Due to its lightness and neatness Valenciennes lace, although very expensive was simpler to produce than Mechlin lace, and was never used for expensive garments. Instead it was applied to bed linen, lingerie, and the fichu (a woman's scarf wrapped over the shoulders and fastened in front).This lace was favoured by Queen Victoria, the Empress Eugenie and others as a trim on undergarments. The basic undergarments were stays, shift (smock, chemise or shirt), petticoat and drawers although drawers were not in general use until the mid-19th century when the tendency of the fashionable crinoline to become airborne or to tilt itself at embarrassing angles made a covering garment for the nether regions essential. Drawers were just two cylinders for the legs, joined at the waist with the lower ends frilled or trimmed with lace.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Machine made Valenciennes lace with diamond groundjanet amess lace collection, lace, churchill island, machine -
Churchill Island Heritage Farm
Clothing - Panel of lace pieces x 8
At just 20.6cm in lace length and 27.5cm wide, this section of Torchon machine made lace is quite possibly a sampler for future purchases being a mixture of edging and insertion pieces. Torchon lace is a bobbin lace which is coarse and strong and was made all over Europe a characteristic of which was that the design and the ground were made in one continuous piece as opposed to motifs joined by brides. In 1809 John Heathcoat created a machine made net which didn’t unravel when cut and by 1870 every type of hand made lace had a machine made copy. Hand made lace as an industry virtually disappeared by 1900 and these machine made pieces were comparatively cheap.The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women.Cheap Torchon machine lace Packaged with note: "Scraps of lace found jumbled with this collection"janet amess lace collection, lace, churchill island, amess -
Bendigo Historical Society Inc.
Clothing - MAGGIE BARBER COLLECTION: CREAM TULLE AND BRUSSELLS LACE BOLERO
Clothing. The lower section of this garment has been removed, making an accurate assessment impossible. A beautiful panel of lace from the neckline, dipping to a Vshape at the centre back, has a swirled and leaf design. This design extends over the shoulders and bustline, with a peaked finish below the bust. Bows and spots decorate the below elbow sleeves, and are finished at the lower edge with a panel of lace 8 cm deep at the seam, extending to 15 cms deep at the outer side. Brussells lace is a bobbin lace added to the background fabric. forming the design.costume, female, cream tulle and brussells lace bolero -
Flagstaff Hill Maritime Museum and Village
Decorative object - Sewing Machine, c 1914-1930
Sewing Machine, Medium C S. (item has 10 parts), treadle operated, in wooden cabinet. Machine body is black with floral decals in gold, cream and red. Cabinet has wheels, 4 drawers containing cylinder shuttle, 2x bobbins, handle from a drawer and a bundle of horse hair. Drive belt is missing, cabinet has evidence of borer. Ironwork on right upright has 2 splits, name on plate of treadle is worn off. Decals include English Made and Approved to Her Majesty Queen Victoria. Machine has Serial Number.Pencilled inside machine support " 11/11/10 H M X" Serial Number "66389" Decals include "MEDIUM C.S / APPOINTED TO HER MAJESTY / QUEEN VICTORIA", "ENGLISH MADE".flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sewing machine, cylinder shuttle sewing machine, dressmaker's equipment, taylor, jones sewing machine, medium c.s. machine, medium cylinder shuttle machine -
Wodonga & District Historical Society Inc
Functional object - Singer Electric Sewing Machine, The Singer Manufacturing Company, 1950
Singer was first established as I. M. Singer & Co. in 1851 by Isaac Merritt Singer with New York lawyer Edward C. Clark. Best known for its sewing machines, it was renamed Singer Manufacturing Company in 1865, then the Singer Company in 1963. The Singer company began to market its machines internationally in 1855 and won first prize at the Paris world's fair that year. They had offices established in both Sydney and Melbourne by the mid-1960s. The company demonstrated the first workable electric sewing machine in 1910. Singer was also a marketing innovator and a pioneer in promoting the use of instalment payment plans, making their machines more affordable for many people. According to its serial number, this machine was manufactured in 1950 and was one of the new models designed to be more portable as it only weighed about 10 KG.This sewing machine is of local, national and international significance as it represents developments in technology and the impact this had upon the work of women.The Singer 99 was a sturdy and reliable machine that was easy to use. Lighter than other machines of its time, this machine weighed only 10 Kgs. It is mounted on a wooden base with a small compartment under the balance wheel to store accessories and bobbins. It has a 'Bentwood' (polished plywood) cover which also provided some room for storage. The machine is driven by a small electric motor and a light to illuminate the work area. It is decorated with gold decals and a filigree pattern. It includes a knee control which is inserted in a hole at the front of the machine. The serial number EG045782 indicates it was manufactured in 1950.Across the top in gold script: "The Singer Manufacturing Co. / Made in Great Britain" On light cover: "SINGER" Plate with specifications also attached.singer sewing macnine, domestic appliances, women's work, technology -
Churchill Island Heritage Farm
Clothing - Mob Cap, Budoir
A mob cap was worn over the hair when indoors working and a hat could be placed over it when going outdoors. It was quite reasonable to receive visitors while wearing a mob cap. This cap has been labelled as a ‘boudoir’ cap to be worn over curlers or to keep a lady’s hair in place overnight. It is made of cotton and has beautiful torchon lace inserts with the same lace trim around the edge. This torchon lace is a handmade bobbin lace using soft cotton thread.in a simple design of filled diamonds alternating with spiders. These caps were worn by women in Georgian times and called a ‘bonnet’. The term ‘mobcap’ may have come from the Dutch or French languages but the name was cemented during the French Revolution when most of the revolutionary women were wearing these caps. During the Victorian era they were mostly worn by servants or nurses.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide respresentative examples of techniques from the late nineteenth to the early twentieth centuries. white cotton mob cap, with central lace section in the form of a crossPackaged with note: "White cotton handmade lace mob cap"lace, lace collection, churchill island -
Churchill Island Heritage Farm
Clothing - Neckpiece, Small
Just 23cm in length, this lovely piece is an example of handmade Maltese silk lace. Maltese lace has an interesting history. It began as a needle lace which was developed in Genoa and in 1530 was brought to Malta and Gozo by the Knights who were sons of noble families in Europe. This was a time of great demand and lace was used in the clothing of men, women, children, and the clergy for its decorative element but also as a sign of wealth and status. In the mid 1800s Lady Hamilton Chichester sent lacemakers from Genoa to Malta where they turned the old needle lace patterns to bobbin lace which was much faster. The art of lacemaking is still taught in Malta in evening classes, government trade schools for girls and at the School of the Arts. Maltese lace can be identified by the following characteristics: a) cream silk, b) 8-pointed Maltese cross worked in cloth stitch c) closely worked leaves or ‘wheat ears’ all of which occur in this pieceThe Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women, see above.Handmade Maltese silk lace lace, churchill island, janet amess lace collection, neckpiece, clothing, garment, amess, maltese, silk, handmade -
Bendigo Historical Society Inc.
Document - Y.M.C.A., Y'S WORKBOX, DISPLAY & DEMONSTRATION OF HAND CRAFTS, 27 October 1985
Event, Bendigo Y.M.C.A., Y's Workbox, Display & Demonstration of Hand Crafts, at The Y.M.C.A. Stadium, Mundy Street, Bendigo, Sunday October 27, 1985, 10am - 5pm. Admission: Adults $2.00 , Children 50c, Devonshire Teas $1.20. Crafts include: Plate Decorations, Wood Carving, Tatting, Bonsai, Filet Crochet, Patchwork, Jigsaws, Model Ships in Bottles, Knitting from Fleece, Soft Toys, Silversmithing, Christmas Decorations, Floral Art, Wood Turning, Pickled People, Padded Baskets, Machine Embroidery, Applique, Knitting, Overlocking, Latchhook Rugs, Make-Up (TV & Films), Bobbin Lace, Printing, Golden North Centre.event, exhibition, bendigo y.m.c.a.