Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” steel blade, wooden handle and peg grip. Single person sawcrosscut, saw, churchill island, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Two handled cross cut saw. One manufactured handle and one bush replacement wedged with three inch nail. 6 broken teeth. Rivets for handle broken off at home-made end. M shaped tooth profile.churchill island, crosscut, saw, tool

A scythe is an agricultural hand tool that cuts grass and is used by making large sweeping motions through the crop. Eventually replaced by horse-drawn or motorised machinery, they are occasionally still used as they are inexpensive and efficient. There are different types of scythes with larger or smaller blades. This particular scythe was manufactured by W.A Tyzack & Co. Ltd. Set up by William Tyzack in the early 1800s in Sheffield, United Kingdom, they grew into a larger manufactory specialising in agricultural tools. Adding the ‘Horseman’ brand to their trademark in 1948, they expanded dramatically and exported throughout the Commonwealth.Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Cast steel blade. Hole on back and of blade for hanging. Steamed handle (may not be original). Complex pipe/nut washer and five metal shims keeping blade on handle.From tip: BEST CROWN W.A. TYZACK & CO. LTD STELLA WORKS SHEFFIELD. Near handle: image of figure on horse.churchill island, scythe, wa tyzack, sheffield, machinery

Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Curved blade, painted black. Wooden limb handle, varnished, some white paint spots. Nail into handle in blade holder sleeve. Slight bulge in handle near blade holderchurchill island, fern hook, olinda, mount dandenong, nilma north

A Sickle is an agricultural hand tool used for harvesting or reaping grain crops using the sharp blade in a swinging or hacking motion. It was also used for cutting back forage and other plant growth. They have been used since early Iron Age times and many examples have been found in the Middle East dating back 18,000 to 8,000 BC. This is a bagging hook – a type of larger and heavier sickle used mainly for harvesting of grain. It continued to be used after industrialisation and the implementation of the mechanical reaper. Designed by British manufacturing firm, Brades & Co, and made to be used by the left hand, its age is unknown. Left handed sickle. Blade painted black; handle varnished. Metal ferrule on handle. Hook on blade at handle endB?RADE? BRADER OZ?sickle, harvesting, churchill island heritage farm

A Sickle is an agricultural hand tool used for harvesting or reaping grain crops using the sharp blade in a swinging or hacking motion. It was also used for cutting back forage and other plant growth. They have been used since early Iron Age times and many examples have been found in the Middle East dating back 18,000 to 8,000 BC. This is a bagging hook – a type of larger and heavier sickle used mainly for harvesting of grain. It continued to be used after industrialisation and the implementation of the mechanical reaper. Designed to be used by the right hand, its age is unknown. Right handed sickle. Blade painted black. Handle varnishedsickle, harvesting, churchill island heritage farm

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Used by the donor in clearing timber at Olinda and Shady Creek, Victoria. Forms part of a timber clearing tool collection including cross cut saws and Trewhella jack.wood cutting/splitting wedge. Steel. commercially made. Has relief groove.TROJAN [stamped on side]timber cutting;, timber splitting, olinda, shady creek, churchill island heritage farm, wilfred dungan collection

A fern hook is an agricultural tool used for slashing or reaping crops which are then gathered in sheaves and bundled together. Primarily used for penetrating and cutting through larger and heavier foliage, this example has a bored hole, probably used for attaching a longer wooden handle.fern hook with surface rust, but made from good steel. No handle."PARKER CAST" image of feet in first ballet position, with No 6 under left foot. "1281"parker tools, fern hook, agriculture, churchill island heritage farm

In the 1950s and 60s, Ferguson's bone cutters were used by obstetricians to remove the foreskin during circumcisions. The scoring on the handles is to prevent the tool slipping in the user's grip when in use.Metal bone cutter, with hand grip scoring on outer arms. Similar in appearance to pliers, with short cutting blades.circumcision

Pittock coach builder's box, 15 assorted chisels located in assigned locations at the front of the box: * 12 steel chisels with wooden handles in various stages of use, and 3 cold steel cold chisels * some chisels have manufacturer's marks, indistinguishable to read two chisels have P (Pittock) incised into the wooden handle * 4 straight chisels, 245-280 mm L, 10-23 mm cutting edges * 4 curved chisels, 245-320 mm L, 10-30 mm cutting edge * 2 cold chisels, 160-195 mm L * 1 steel punch, 165 mm L * 4 narrow bevelled eased chisels, 215-280 mm L, narrow cutting edges Items stored in Pittock coach builder's box, reference 13000.1.

Adenoid curettes are used to remove infected or inflamed adenoids. Their sharp inner blade removes the adenoid in an atraumatic manner without causing harm to the surrounding tissues.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal curette (surgical scraping tool). Consists of a handle section with divots for ergonomic finger grip, and a straight, thin metal shaft which forks into two small arms with a cutting blade between them at the tips. The arms at the end of the shaft are curved so that the blade is perpendicular to the shaft of the instrument. Shaft of the curette is engraved with the text 'MEDICAL SUPPLY DEPOT''MEDICAL SUPPLY DEPOT'surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Double headed metal curette (surgical scraping tool). Consists of a thin metal shaft with a small cutting blade in the shape of an open loop at one end, and a solid metal scoop at the other end. There is an ergonomic grip at the middle of the tool. surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal forceps. The forceps resemble a set of pliers, with cutting blades at the end of the handles. The handles of the tool are engraved with the text 'MAYER &/MELTZER' on one handle, and 'LONDON' on the other.'MEYER &/MELTZER' 'LONDON'surgery

Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal surgical scissors. Consists of two arms with handle grips, a narrow shaft, and small cutting blades at the end of each arm. The inner aspect of the scissors is engraved with the number '47'. The shaft is engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.'47'obstetrics

During early farming in Australia (before motorised whipper snippers) the hand held sickle was used to cut long grass, in this case in or around railway tracks. The inside of the blade's curve was sharp, so that the user can either draw or swing it against the base of the grass, catching the stems in the curve and slicing them at the same time. Historic - Railway Permanent Way and Works - track equipment - Grass SlasherWrought iron sickle with extended with wooden handle.puffing billy, extended sickle, farm tool, reaping hook, curved blade, grass cutting

Circa 1920s petrol driven cross saw. It was mainly used cross cutting felled logs The Land on which the Menzies Creek railway station and Museum are built on was once apart of James Hermon's & his son William Hermon's property on which this Drag Saw was used. reference : Jinkers and Whims: A Pictorial History of Timber-Getting By Jack BradshawHistoric - Industrial Timber working petrol driven cross saw - Drag SawLarge, mechanical saw mounted on a steel shaft connected to tin fuel and water containers. The machine has two large spoked wheels, a rotating Crankshaft and an extended arm/rod attached to a crank and flywheel.New Record puffing billy, drag saw, timber cutting, early mechanical equipment, james hermon & sons, menzies creek, 1920s

A mortising tool is a specialist axe designed for hewing sills and cutting notches in timber. It has a long, narrow head, making it easier to work on large logs. The shape enables the user to cut a long way down into the notch, where otherwise a chisel would be used. Example of a common bush woodworking tool used before the advent of chainsaws and power equipmentMortising Tooltimber tools

A mortising axe is designed for trimming or cutting notches in timber. It has a short handle and square cutting edgeMortising Axe - smalltimber tools

A mortising tool is a specialist axe designed for hewing sills and cutting notches in timber. It has a long, narrow head, making it easier to work on large logs. The shape enables the user to cut a long way down into the notch, where otherwise a chisel would be used.Example of a common bush woodworking tool used before the advent of chainsaws and power equipmentMortising Tool, AxePrades Co Solid Steeltimber tools

Note by T.H. Kneen 5 February 1992, "Note caps worn by the young men and the sharpening tools (whetstones) in carrier on hips of the operators." and on 26 February 1992, "Location is probably in the east orchard looking in the direction of Hawthorn." Black and white photograph. 2 male students using scythes cutting wheat ? in the East Orchard.wheat, sharpening tools, whetstones, students working outside, east orchard, caps

SHAPED WOODEN FRAME WITH SAW EDGE FOR PRUNING TREES OR CUTTING TIMBER. THE FRAME IS REINFORCED WITH METAL RODS THAT ALSO ADJUST THIS PIECE OF EQUIPMENT. ONE METAL ROD ACROSS THE TOPS STABILSES THE FRAME, ANOTHER ON AN ANGLE BRACES THE CENTRE WOODEN BAR. NONElocal history, trade, tools

Curved steel blade with serrated edges finishing in a fine tip. Wooden handle. Used for cutting grass and hay.Makers Mark|4rural industry, agriculture

Drawn Steel Tool with blunt cutting edge at one end and round top at the other.trades, metalworking, mechanics