Castlemaine converted from town gas to Natural gas in 1973.Collection Castlemaine Gas. Photo of changeover to natural gas. Left of centre white van, left background red brick building, Centre cream brick building, white car with two men standing near front, right centre two white station wagons.business, retail, gas and fuel

Rubberised fabric gas cape. On the inside there is hand written writing relating to machine gun procedures. military equipment - army, costumes - male, gas

Newspaper photo of the Wireless Patrol crew with carbines and tear gas equipment at a siege in 1962Four men standing beside and in front of a car with boot opened. Man front left wearing a gas mask; man in centre getting gas mask ready to put on; man on right carrying a rifle and flashlight; man left rear putting a gas mask on. Circa 1973Wireless Patrol 1962-63. L to R Fred Barnham, S/C Bill McRae, Adrian Lalor, Ron King (driver)police vehicles; wireless patrol; motor transport branch; motor transport section; barnham, fred; mcrae, william; lalor, adrian; king, ronald

The mask is of the type issued to civilians for air-raid precautions in Australia during World War II.A gas mask is a piece of personal protective equipment used to protect the wearer from inhaling airborne pollutants and toxic gases, this particular type believe to possibly be a M1A 2-1-1 designed for civilian use during World War II.Child size respirator / gas mask comprising rubber head harness with yellow tinged celluloid eyepieces and elasticized straps to attach around head at back. A grey metal gas filter cannister is fitted to the front of the mask, printed with an extensive inscription about use and cleaning. Grey plastic air vent to the side of the head harness.Top front of rubber head harness embossed is 'CHILD' Extensive inscription printed on gas filter cannister. 'THIS GAS MASK IS FOR PROTECTION AGAINST CHEMICAL WARFARE AGENTS ONLY, DISPERsED IN FREE AIR.' Instructions on fitting and cleaning follow.second world war, world war ii, child gas mask, army, civilian

During World War One poisonous gas was used as a weapon. When gas was detected or suspected an alarm was given in the trenches so soldiers could put on masks and protective gear. The gas rattle was a simple and effective method of raising the alarm. Gas precautions were taken in World War Two but gas was not used. This rattle might be WWI vintage or it might be from WWII era.A wooden box incorporating a toothed cog attached to a 'swing' handle. When swung the toothed cog engaged with a wooden flap enclosed in the box causing a loud noise. world war one, wwi, gas

The document confirms that the Tender for the supply of maintenance to the Warrnambool Light, also known as the Lighthouse, by the Warrnambool Gasworks was successful. The Tender was issued by the Engineer in Charge, C. Maclean, Ports and Harbours, Melbourne, for a the period ending 30th June 1908, at the offered rate of 10/- (ten shillings) per 100.0 c/f (cubic feet). The Manager of the Warrnambool Gasworks expected to follow this acceptance with a visit to the Collector of Customs to sign the Conditions of Contract and Bond. The light of Warrnambool's Lady Bay Lighthouse was originally powered by oil. Later it was converted to gas, followed by electricity, then solar power, and finally to battery power. The Warrnambool Gas Company operated the gas works from the 1870's to the late 1920's.This document connects Warrnambool's Lady Bay Lighthouse to the Warrnambool Gas Works during the first decade of the 20th century. It documents to process of a Government department requesting Tenders for the supply of goods to operate a service, the the formal documentation required at that time.Pale cream rectangular paper with template text printed in black and completed in black ink script. Letterhead of the Department of Ports and Harbours, Melbourne, and addressed to the Gas Works, Warrnambool, dated 25th June 1907, for the supply of maintenance to the Warrnambool Light until 30th June 1908 at the cost of Ten Shillings per 100 cubic feet. A purple stamped signature is also added and initialled in red pen."25th [June] 1907" Warrnambool [Light]" "Manager W'bool Gasworks" "supply of gas to" "1908" "10/- per 100.0 c/f" "Collector of Customs" " The Manager / Warrnambool Gasworks" [Signature] "for" [Engineer in Charge, Ports and Harbours] Stamped " C. -. Maclean"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, department of ports and harbours, ports and harbours, ports and harbours melbourne, warrnambool light, warrnambool lighthouse, warrnambool gas works, w'bool gas works, gas works, gas supply, early 1900s, early 20th century, shillings, cubic feet, collector of customs, customs, warrnambool customs, engineer in charge, lady bay lighthouse, warrnambool gas company, gasworks, warrnambool gasworks, maintenance, c. - maclean

Gas masks like this one were primarily used during World War I and World War II as part of civil defense and military protection against chemical warfare agents such as mustard gas. The rubberized body and glass lenses were designed to seal tightly around the face while providing visibility. The filter port and hose were used to attach a filter canister that would remove toxic particles from the air before it reached the wearer. These masks were critical during times of airborne chemical attacks and were issued to soldiers, civilians, and emergency personnel. Gas masks from this era are historically significant, representing the widespread fear of chemical warfare and the lengths taken to protect individuals from such threats.The item is an early to mid-20th-century gas mask, likely used during wartime or industrial settings for respiratory protection. It consists of: A black rubberized facepiece, designed to cover the entire face for an airtight seal. Two circular glass eyepieces, which are slightly fogged or deteriorated, allowing visibility while protecting the wearer’s eyes from contaminants. A large, perforated metal filter attachment on the front, which would have contained activated charcoal or other filtering materials to remove harmful substances from the air. A side port or connection valve, possibly for attaching an external filter canister or breathing hose. Adjustable fabric straps, which are frayed and discolored, indicating long-term use or exposure to the elements. The mask shows visible wear, dirt, and signs of aging, suggesting it has been stored for an extended period.gas, mask, war, clothing

Cardboard cylinder with green wrapper marked Veritas XXX quality Ramie Gas Mantle No 6841 British Manufacture.Veritas Incandescent Mantle Works London SW.18.lighting, gas, mantle

Canvas shoulder bag used to carry rubber gas mask within. Mask used by military to prevent inhaling noxious fumesAs manufactured by GMH during world war 2Canvas bag used for carrying a gas mask. Two pocket design, two metal studs on front for sealing pockets. Gas mask contained within bag.VI GMH 1941bag, military, gas mask

Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Grey metal spring loaded clip with serrated jaws. A brass cylinder is attached. The object is possibly part of a gas mask.Stamped on cylinder: A M 6D.526 MKIVgas, masks, military

Lighting was by gas before electricity was installed in houses. Before the 1800s most homes, workplaces and streets were lit by candles or oil lamps.The cities had gas before the country areas.Gas lighting was available in the Kiewa Valley before electricity was installed.Early 20th century. Gas light used indoors and made of copper tubing, brass, and bakelite.gas lights, home lighting

.1) & .2) Package issued as EYESHIELDS, Anti-Gas, MK.II. On back of package are instructions for action to be taken to avoid blisters as a consequence of a gas attack. Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details..1) Double layer of clear plastic eyeshields. Cloth & felt forehead pad. Black elastic & metal hooks for fastening around head. .2) Waxed crown cardboard storage packet. Black printing front & back.Printed in front on packet: EYESHIELDS, Anti-Gas, MK.II Printed in back on packet: Instructionswarfare, anti gas, eye protection

The book contains hand written notes and drawings at a Gas Warfare School 1918Notebook French. Used at a Gas School 1918. Black fabric cover, written in englishpersonal effects - notebooks, documents - notebooks, french, gas warfare

This item and it’s associated gas mask (Cat.No. 0096.1) are of a style typical of German WW2 gas mask and connister, but the use of vinyl instead of rubber and the Spanish manufacture of the gas mask suggests post WW2 manufacture. German WW2-style tin gas mask container, with hinged lid with clip. Lid incorporate stowages for anti-fog lenses (2 in grease-proof envelope). Three loops for attaching webbing. Webbing carry straps missing. Olive green paint. Removeable cover from gas mask filter (ref: Cat.No. 0096.1) stowed loose in cannister.

WW2 Guidelines for the protection against gas in the field, respirators and passive air defence.Cream cardboard covered booklet Coat of Arms Protection Against Gas and Air Raids Pamphlet No 3 Passive Air Defenceprotection against gas and air raids, ww2

Gas mask which includes face covering with two eye pieces, metal casing and flexible hose connecting the twomilitary-equipment, military history, protective gear, gas

Vinyl gas mask with webbing straps & transparent eye pieces attached to a metal canister. Instructions for use & maintenance are printed on the side of canister.Imprinted into vinyl: “Med Adult” Stamped in black on vinyl: “Lot 21-3-SG”military equipment, passchendaele barracks trust, gas, masks

A World War 2 issue anti gas mask complete with respirator contained in a canvas bag, also includes anti-dimming cannister The base of the mask is stamped 1942, the mask itself is dated 2-4-42gas, mask, holding, bag

Sectioned steam pump so that the pump workings can be seen. Inscriptions & Markings: Tangye Birmingham, This steam pump was presented by the colonial gas Assn Ltd (brass plaque) The Colonial Gas Association was originally formed in London on 2 February 1888, as The Australasian Gas Association Limited. The primary objective of the company was to provide investment capital to help finance the construction and management of gasworks being established by the London engineering firm John Coates & Co in metropolitan cities and regional towns throughout Australia and New Zealand. By 1890, the Australasian Gas Association had acquired gasworks at Benalla, Shepparton, Wangaratta, Warragul, Maldon and Seymour, and had constructed a large gasworks at Box Hill to supply the eastern suburbs of Melbourne. In 1893, the company's name was changed to the Colonial Gas Association Limited. During the 1890s, the company acquired regional gasworks in Queensland, Western Australia and South Australia, followed by its first gasworks in New South Wales, in 1911. In 1914, the company consolidated its metropolitan supply area by purchasing the Oakleigh and Footscray gasworks. Further expansion occurred in the 1920s with the purchase of established gasworks at Williamstown, Frankston and Dandenong and the acquisition of ten further gas undertakings in Queensland and New South Wales, making the firm the fifth largest gas producer in Australia. info from The Colonial Gas Association Limited, circa 1893 https://collections.museumvictoria.com.au/items/1553322 Originally formed by the five Tangye brothers from Cornwall as James Tangye & Brothers in 1857, this Birmingham engineering firm grew to become one of the largest suppliers of jacks, pumps, steam and oil engines, hydraulic presses, gas producers and machine tools in the late 19th and early 20th centuries. The successful sideways launching of I.K. Brunel's 'Great Eastern' from the mud of the Thames in 1857 using Tangyes hydraulic jacks gave the firm much needed publicity and new orders flowed in. To finance expansion, George Price provided additional capital and the company name became Tangye Brothers & Price in 1859. A new factory known as the 'Cornwall Works' was built in Clement Street, Birmingham. In 1872, the firm became Tangye Brothers and in about 1879- 1880 began production of internal combustion stationary engines based on Horace Robinson's patents, later using the Otto four-stroke design for its Soho range of gas engines. Examples of the Soho engine were exhibited by the firm at the 1880 Melbourne International Exhibition. Petrol and oil engines were made from the 1890s onward, and by 1910 had developed into the Model B, BR and AA series engines. Tangyes supplied custom-built pumps and presses for particular applications, becoming a major exporter of engineering equipment. In 1884, Tangye Brothers opened a custom-built branch office, showroom and warehouse in Melbourne at Cornwall House in Collins Street West, advertising the full range of engineering products. These lantern slides images are taken from Tangyes product catalogues from the 1910-1925 period and are believed to have been used as sales promotional aids in Australia by the Tangye Brothers. info from https://collections.museumvictoria.com.au/articles/4670 Historic - Industrial Steam Operated Water Pump built by Tangye Bros and used by the Colonial Gas Company - Melbourne, Victoria, AustraliaSectioned steam pump so that the pump workings can be seen. Tangye Birmingham, This steam pump was presented by the colonial gas Assn Ltd (brass plaque)puffing billy, steam pump, sectioned, tangye bros

Used at Foster Valley Mills for storing gas masks, probably during WWII.Masonite case with metal frame and leather carrying handle has three internal compartments used for storing gas masks.textile mills - staff world war ii textile mills, valley worsted mill foster valley mill pty ltd, textile mills - staff, world war ii, textile mills

The WWII US civilian gas mask for children was issued in a cardboard box. It came with a canvas carrying bag which had a shoulder strap sewn to the sides. This US Civilian home front item was issued during World War two. Gas masks were distributed among the general population because of the fear of Japan, and even Germany, being able to reach the main landCardboard box containing child size rubber and metal gas mask with green canvass bagModel MIA2-1-1non-combatant child's gas mask, ww2

Gas mask contained in a canvas bag manufactured and used during the second world warBag manufactured by GMH 1942Canvas bag with webbing strap, canvas cover, with brass press studs. Inside bag gas mask with items for maintaining the mask.V11 GMH 1942military, bag, gas mask

Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Small gas mask with black circular canister attached to rubber face covering. Single oval eye piece made from clear plastic like material. A rubber band secures the face covering to the canister.Printed on rubber face covering: L&B.R.Co (G) Oct 1937 Printed on band securing face covering to canister: POPPE LOT 3.11.39 7231gas, masks, military

All items belonged to Harold Victor Allen who worked for Colonial Gas Association Ltd. Firstly at Footscray and then Box Hill in the 1960's. Retired in 1971. Born in Ballarat in 1906. Apprenticed and worked there till 1945, then moved to Footscray. Eileen, his wife, worked with Harold, helping with the Natural Gas Conversion during Harold's Box Hill time.Change over in Victoria from Gas fired gas supply to Natural Gas supply to Victoria from about 1965 -1. Gas testing kit in green metal box, with silver handle and clasp (silver colour)|2. Suction ball and pump body.|3. Detector tubes of glass capillary. 4. Instruction Manual. 5. Sealing cap ( box of 10) All spare parts |6. Natural Gas Conversion Badge.H.V.Allen MSAgas technology, appliances & accessories

1. The Bendigo Gas Company formed in 1859, established the Bendigo Gas Works and became an incorporated company in 1860. It produced coal gas for the community until it was liquidated and delisted as a company in 1959. 2. The Colonial Gas Association was incorporated in 1888, selling shares for 5pounds and 10 pounds. It was originally formed in London with the aim of raising investment capital for the construction and maintenance of gas works across the cities and towns of Australia and New Zealand. Its original name was the Australasian Gas Association and this changed to the Colonial Gas Association in 1893.The Bendigo Gas Company notice of annual general meeting of shareholders for the years 1947 to 1952. The meeting to be held at the company registered office at 49 Pall Mall, Bendigo. Directors: Rex F. Hyett (Chairman), J.S. Wilson, H.N. Butt, S. Proud, F. Levy. Manager and secretary W. Pain. Also, The Colonial Gas Association Limited notice of annual meeting for the years from 1949 to 1953 to be held at 360 Collins Street, Melbourne. Directors: C.F. Broadhead (Chairman and managing director), James M MacFarlane, Robert Weir, Gerald L. Patterson.bendigo gas comany, the colonial gas association, shareholders

Undated photograph on postcard depicting horses and carts with gas lamp in the distance on Bourke Road, Camberwell. Front of postcard: 'Bourke Road, Camberwell' Back of postcard: 'Post Card' 'This side for correspondence' 'This side for address' 'Stamp here' 'Printed in Germany.' Handwritten notes '22649 $20'camberwell, bourke road