Binishells are reinforced concrete thin-shell structures that are lifted and shaped by air pressure. They were invented in the 1960s by Dante Bini, who built 1,600 of them in 23 countries.Colour photograph of a distinctive architectural feature known as a Binishell on the Gippsland campus. The large reinforced concrete dome is shaped and lifted by air pressure. Its inventor, architect Dr. Dante Bini, directed the construction of the Binishell in December 1979. The eleven metre high binishell, used 300 tons of concrete and reinforcing steel, was inflated by a large membrane in around one hour, using Dr. Dante Bini's ferrocement method. The Binishell was used as a place for exams and graduations. Reactive clay in the soil caused the footings of the binishell to twist, subsequently causing the shell to crack. The resulting damage diminished structural integrity, resulting in the Binishell not being used in 2004 and early 2005 while a new structure support was installed. Normal use of the building was resumed in Semester 1 2005. Eventually the external thermal membrane started to fail, and on 14 February 2009, the Binishell was demolished, with new auditorium built at the campus for classes, graduation ceremonies, exams and conferences.gippsland campus collection, binishell

Slawa built the umbrella using existing and modified umbrella parts purchased from manufacturers and other sources with the idea to develop a more practical umbrella. At the time Slawa was a student studying sculpture at the Akademie der Bildenden Kunste Wien (Academy of Visual Arts). She spent many months developing the prototypes in secret before she applied for and received a patent on 19 September 1929. The patent documentation for Flirt noted that although foldable umbrellas with telescopic shafts were not new, the inventor's umbrella was a significant improvement as it was smaller and more practical as the folding mechanism had been considerably simplified. The umbrella was included in the Inventors’ pavilion at the Vienna Spring Fair in 1931. In a contemporary newspaper report it was described as ‘the magic umbrella of the sculptress’. After the design was granted a patent, it was contracted to the firm Basch and Braun, which authorized its manufacture under licence by the largest Austrian umbrella manufacturer in Austria Bruder Wuster and a German firm Kortenbrach und Rauh. It was called Flirt. In the first year of production sales reached 10,000. This number increased steadily each year as sales spread throughout Europe and the Flirt umbrella was still being produced in the post-war period. Slawa was paid royalties till 1938, the year that she left Vienna and fled to Switzerland. In 1939 with pressure from the Nazis she sold her rights to the company Bruder Wuster. Ann Carew 2016The umbrella prototypes have national and international aesthetic significance as examples of technological innovation in industrial design. The archive has national and international scientific and research potential – detailed records concerning the development of the design, patent and its manufacture are held in the studio. The archive demonstrates the links between the realms of fine art, industrial design and manufacturing in Vienna in the early twentieth century. The sale of Slawa Horowitz-Duldig’s rights to the umbrella under duress from the Nazis makes this archive historically significant. The provenance is excellent, and the prototypes and accompanying documentation have national and international interpretative potential. Ann Carew 2016Three handmade compact foldable umbrella prototypes. The prototypes have black silk covers, a metal shaft, handle, ribs and ferrule. The shaft has a telescopic mechanism. The top and the end of the handle are metal disks. The related documents, designs, patent documentation, a hand written record of her inspiration for the design, and other archival material are also held in the Studio’s Collection.

This is a Morse Code key. Morse Code is a method of transmitting text information using short and long signals (‘dots and dashes’). It is named after Samuel Morse, the inventor of the telegraph and was developed in the 1860s. It was used extensively in the 1890s for early radio communication before it was possible to transmit voice and continued to be used in the 20th century along with voice transmission , especially by amateur radio persons. It was also used in military and naval communication but not so much today. It is believed that this Morse Code key belonged to Ted Salamy, a jeweller and the first person in Warrnambool to hold an amateur radio licence (1924 Call Sign A3AJ, the 35th licence issued in Victoria).This Morse Code key is of interest as an object more used in the past, especially by amateur radio persons. It is believed to have been the property of Ted Salamy, the first person in Warrnambool to hold an amateur radio licence. This is a metal Morse Code key with an oval metal base. It has three screws inserted in the base and two more screws attached to the sides of the base. There is a key lever on top of the base and this is adjustable. The hinge on which the key lever sits is missing. The lever has a round black knob at one end. ‘Made in U.S.A. H15.682’ Wm.M. Nye Co Inc. Bellevue W.A.’ morse code key, ted salamy,, history of warrnambool

Bentwood furniture is a type of furniture made by bending wooden rods into the required shape after they have been heated with steam. Mundus bentwood chairs are among the most successful examples of early mass-produced furniture. Mundus furniture was a manufacturing company, active in several places in the Austro Hungarian Empire, at the end of the 19th century and early 20th century. Factories seem to have existed in multiple locations, as the products carry diverse labels, such as "Budapest", "Borlova", "Czechoslovakia", etc. Some of the furniture was co-signed with "Jacob and Josef Kohn". In 1914 Mundus merged with J. & J. Kohn, and in 1922 with Gebrüder Thonet the inventor of the bentwood chair.The item is significant as it is an early example of mass-produced manufactured furniture from a company in Austria that pioneered this type of furniture around the turn of the 19th century. The item is now a collector's piece giving it additional significance.Bentwood ChairMundus Vienna Austriashipwreck coast, flagstaff maritime museum, flagstaff hill village, bentwood chairs, mundus furniture company, furniture, manufactured furniture, vienna austria

The fireplace was the main heating source for small houses before 1900, so a bellows to coax a flame from a dying fire was important. Early bellows were a bag made from the skin of a small animal and a piece of metal, usually brass, to direct the gust of air created by squeezing the bellows to fan the flames. Such bellows existed in China at least since the 5th century BC, when it was invented, and had reached Europe by the 16th century. In 240 BC, The ancient Greek inventor Ctesibius of Alexandria independently invented a double-action piston bellow used to lift water from one level to another.An item in domestic use in homes to coax a domestic fire into flame, the subject item was probably used in the late 19th to early 20th century home with open fireplaces as a domestic object. It gives a snapshot into how domestic heating was provided using wood or coal before electricity or gas came into regularly used.Bellows wood, leather and metal, parts Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, bellows, blacksmith bellows, fire bellows

Table of Contents: Editorial, Inventions and inventors, The hydroplane launch "Maple Leaf III", Hints on examination, First aid, Some geographical features at Ballarat, The volumetric determination of potassium, Milk, The cannon, A scientific apologue, New inventions by Tesla, Coronation fair, First aid, Cinematography, Electrical chatter, Education and training of engineers, Mining notes, Engineering students midwinter excursion, Hints to S.M. B. yachtsmen, News and notes, The long and short of it, Abbreviated account of the geology of the Forbes-Parkes gold field, Excursion to Pyke's Creek Reservoir, A practical joke, Sports, Past students, Answers to correspondents, Editorial notes.table of contents: editorial, inventions and inventors, the hydroplane launch "maple leaf iii", hints on examination, first aid, some geographical features at ballarat, the volumetric determination of potassium, milk, the cannon, a scientific apologue, new inventions by tesla, coronation fair, first aid, cinematography, electrical chatter, education and training of engineers, mining notes, engineering students midwinter excursion, hints to s.m. b. yachtsmen, news and notes, the long and short of it, abbreviated account of the geology of the forbes-parkes gold field, excursion to pyke's creek reservoir, a practical joke, sports, past students, answers to correspondents, editorial notes., alumni: w. k. clifford, j. adam, wilfred avery, h. baxter, l. w. g. buchner, h. caulfield, a. cropper, e. b. crossley, w. currie, dave don, hilary dowling, chas fraser, a. d. galloway, w. geldard,t. e. copeland, l, j. coulter, j. dickinson, g. h. hall, godfrey s.hart, w. b. hirt, h. e. hawkesworth, oliver e. jager, carl janssen, w. t. lakeland, l. j. lambert, c. lund, r. i. moore, byron k. moore, f. a. moss, jack orr, douglas runting, w. t. sayer, l. seward, h. s. sheppard, c. e. sands, n. stuckey, r. vale, r. watts, reg williamson, w. baragwanath, c. c. corrie, r. g. walker, g. g. sams, r. a. j. roberts, r. blight, h. cornell, v. booth, miss l johnson.

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. Dr Geoffrey Kaye sectioned equipment, enabling medical students to see the inner workings and gain insight into the engineering of the equipment.Cross section of Clover's inhaler attached to a circular metal base.Handwritten on white sticker at rear: P / 26 / B •White print on blue sticker: O.2.3. •Engraved on dome side of inhaler: G. Kaye sect. 1939.joseph clover, geoffrey kaye

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. This modified version differs from the original Clover inhaler as it has a glass dome chamber at the top allowing the level of ether to be monitored.Metal based chamber with glass dome top. There is a metal connection point at the top of the glass dome for a rebreather bag, with a whistle tip connection point at the base of the chamber for a facemask. There is no rebreather bag or facemask. There is a black plastic stopper to the side of the chamber, with a glass bulb with a metal wire cage covering.joseph clover, lambert buck, closed administration

In 1945, after feeling Nazi Germany in 1939, Karl Duldig and his wife, Slawa, were finally granted ‘landing permits’ in Australia, after six years living in refugee camps, both here and Singapore. Duldig was appointed art master at Mentone Grammar in 1945, while also establishing a small ceramics business with his artist-inventor wife, Slawa. His work was prolific across several mediums. Our School Archives holds a large collection of sketches, as well as several bronze busts which he made, depicting life, students, and staff at Mentone Grammar during his time at the School from 1945 to 1967.

Elastoplast is the brand name for a type of bandage with an absorbent centre and sticky edges, also known in Australia as a Band-Aid. The inventor of the Band-Aid was Earle Dickson, a cotton buyer for the American company Johnson & Johnson. Dickson’s wife Josephine often acquired small injuries while doing housework, and Dickson tired of helping her dress wounds. He came up with the idea of sticking pieces of gauze a length of sticky tape so she could self-apply dressings. Johnson & Johnson began producing this type of dressing, branded as ‘Band-Aid’ in 1921. In 1928 Smith & Nephew of the UK began producing similar bandages branded as ‘Elastoplast’. This item is significant for its rarity due to age. It provides potential for interpretation as a part of Wodonga's social history.A red Elastoplast First Aid Dressings tin with hinged lid upon which manufacture information is printed.On lid of tin: "Plastic/Elastoplast/First Aid/Dressings"band-aid, elastoplast, medical history, bandages, medical, medicine

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved from Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. This "lady’s" fruit knife was used up to the late 1900's by influential and "well off" ladies, not only as a fashion statement but as a practical tool when away from the kitchen/home to peel fruit and provide a cutting instrument for small items. The first true stainless steel was melted on August 13,1913. However, it did not produce blades that held an edge nor could edges be put onto blades easily so its inventor, Harry Brealey soon earned the reputation of being the inventor of the "knife that would not cut". Over the following decade further developments to the composition of stainless steel led to its wide use in the manufacture of cutlery.A small fruit knife with stainless steel blade. It has an ivory handle and a leather cover for the blade.On blade: Stainless Steel"cutlery, stainless steel, lady's fruit knife

Charles Gabriel Pravaz (1791-1853) was a French orthopedic surgeon and inventor of the hypodermic syringe. In 1844, Irish physician Francis Rynd (1811-1861) invented the hollow needle. In 1853, French physician Charles Pravaz developed the first practical metal syringe. Pravaz added a fine, hollow needle to the end of his syringe instead of the tube. This was an important innovation. Yet in the pre-antiseptic era it was a mixed blessing. The use of injections rather than oral drug administration can more readily promote the spread of disease as well as facilitating its cure. An understanding of the germ theory of disease - and the cardinal importance of using sterile needles - awaited the discoveries of Lister, Pasteur and Koch. But intravenous injection allows extremely rapid pain-relief - and the induction of general anaesthesia when suitable agents were developed.Small ornate metal syringe with raised ridge at either end and in the middle. Tapers to a point at the distal end with pencil like extrusion. Finger ring at the proximal end.pravaz, intravenous, hyperdermic, subcutaneous, syringe, needle

Sidney Yankauer, M.D. (1872-1932), an ear, nose and throat specialist and pioneer in bronchoscopy, practiced at the Mount Sinai Hospital in New York. Dr. Yankauer, a prolific inventor of medical equipment, might best be known for the tube he designed for suctioning the mouth and throat. Yankauer introduced the wire-mesh anaesthesia mask around 1904. The drop method involved placing the mask over the patient’s nose and mouth, and then placing gauze over the mesh of the mask. Next, liquid anaesthetic, such as ether or chloroform, was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. The gutter around the base of the mask was designed to catch any residue of the harmful anaesthetic. (The Wood Library Museum, 2016; Museum of Healthcare Kingston, 2016)A metal tear-shaped mask with gauze wire dome, gutter around the base and detachable spring piece with open circular handle to secure cloth over gauze. Found inside medical carry box #899Stamped underneath neck of circular handle: HATRICKdr [e.s.] holloway, hatrick, yankauer, drop method, mask, gauze

The origins of the pen rack probably began when quill pens were being replaced by steel nib pens that were held at oblique angles for writing this method of writing started to gain popularity around 1820-1860. To understand the development of display racks to hold pens on a desk we need to understand the development of the pen itself. Before the early 19th-century steel pens were almost universally all barrel pens affixed to a holder pretty permanently. Pens were also not disposable. There were even steel pen repair services, just like the same services around at the time to repair you're fine quills. Individual slip nib pens which fit into a holder were originally pieces of a quill which came in a box of nibs and fit into a holder. These were disposable and meant to obviate the need to mend your quills. By 1831 you start to see more what they called “slip nib pens” or “portable pens” (easier to carry than a long barrel pen), but the idea of holding the nib at an oblique angle in the holder was an idea new enough that it warranted a patent. In 1831, an enterprising and very successful stationer and inventor, Sampson Mordan (inventor of the silver mechanical pencil) combined with one William Brockedon to patent the first oblique pen and oblique holder. In the patent application, they mention as the benefits that this would allow the writer to hold the pen more comfortably as well as it should allow the pen to last longer since both tines will be moving across the paper evenly. It appears at the time the idea of holding a pen obliquely was new. As a result of the popularity of the oblique pen many different designs of pen desk holders were being made, to keep pens suspended on a rack alleviated the possibility that the expensive new steel nibs with their holder could be damaged if left in a desk draw with other items.Double sided Pen Rack, decorative metal with four metal legsflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Articles in the annual report include: the building of a new library section at Enfield, transfer of Mitchell Manufacturing to Australian Foundation for Disabled, establishment of Orana regional office in Dubbo, talking local newspaper project launched with Talking Daily Liberal (Dubbo) and Talking Wentworth Courier (Sydney) piloted, four graduates of Rehabilitation Teachers course were funded by the Florence Cecily Singer Trust, one studio equipped with second generation voice indexer in conjunction with Canadian inventor, from 1990 all Braille production will be done in-house, tactile Christmas cards produced for the first time in 1989, financial decision made to consolidate accommodation services (Roselands Nursing Home and Burgess House) on the one site, two new donors clubs established (Cassette Club and Talking Book Club), and formation of Junior Black & White Committee.1 volume of text and imagesroyal blind society of new south wales, corporation records

The International Poma at Falls Creek is a 1,219 metre long Pomalift. Pomalifts are named after their inventor, Polish born French manufacturer Jean Pomagalski. The first poma at Falls Creek was called the International because it serviced the area where a F.I.S. (Fédération Internationale de Ski) international race was held in 1960. It was built over the 1968-69 summer and was ready to operate in 1969, but due to a poor snow season, the 'Inter' didn't open to the public until 1970. The author of this article, Wolfgang Lert, was a pioneer of the ski industry in the USA. He was also editor of Western Skiing, forerunner to Ski Magazine, and a founding member of the International Skiing History Association. The company name on the back of this article is Dulmison (Aust) Pty Ltd. This company was founded in c1961 and played an integral role in development of solutions for power supply problems for the Kosciusko State Park Trust and other ski fields.This article is significant because it outlines procedures for the use of an iconic chairlift used on ski fields throughout the world, including the International Poma at Falls Creek, Victoria. A two page article with images explaining how to use a Pomalift, a new addition to the ski fields in Australia.On bottom Page 2: MADE IN AUSTRALIA UNDER LICENCE BY:- DULMISON (AUSTRALIA0 PTY. LIMITEDpoma ski lifts, international poma falls creek

The Recco system was developed in response to an avalanche tragedy in Are, Sweden in December 1973. The inventor and founder of RECCO, Magnus Granheed assisted in the rescue work. He was frustrated by the primitive methods for locating buried victims that existed at that time, by “probing” with ski poles and digging at random. Unfortunately two people were found deceased. created a passive reflector that could be carried by a skier at all times. After careful research and consultation with professional rescuers, the first prototype was finalised in the beginning of the 80s. In 1983, the company called RECCO was founded. Today the system consists of two parts: a reflector integrated into clothing, boots, helmets and body protection worn by skiers and riders and a detector used by organised rescue teams. These avalanche reflectors were given to participants at the 1987 Interski International Ski Institute Instructors' conference held in Banff, Canada.The invention of these reflectors was critical to increased safety for participants in outdoor activities including skiing at Falls Creek,Two Recco Reflectors which are worn on a skier's equipment or clothing. These strips contain a passive reflector which can be detected by searchers in an emergency situation.From left to right: INTERSKI Banff 1987 / RECCO Avalanche Radar Reflector / INTERSKI ARE 1991recco reflectors, recco system, avalanche rescue, magnus granheed

The battery powered set, which dates from the second half of the twentieth century, comprises two main components, the electronic keyer with a single lever for tapping, and a transmitter (?), both connected by a keying cable. Morse code was invented in the 1830s by American, Samuel Finely Breese by using electrical signals to quickly transmit information over a long range. In the early 1890s Italian inventor, Guglielmo Marconi improved the technology to the point where it became an essential device used for commercial and government purposes. The first practical applications were demonstrated with maritime messaging, where this simple mode of communication was seen as a timely replacement for the historic practice of signaling by flags, lights and foghorns. Cape Schanck has an earlier Morse code key, which is original to the lightstation (CSLS 0035), and Cape Otway has another early example although its provenance to the lightstation has not been formally verified (COLS 0074). The Morse code set has first level contributory significance for its historical value as an earlier communications device that has since been made redundant by more sophisticated technologies.Morse code key set. Comprised of the tapping component and a metal box part with a white electrical cord.Yes

The harsh summer temperatures and the isolated rural environment(of the 1890's) provided the inventor of the "Coolgardie safe" (Arthur Patrick McCormick) with an idea to cool perishable foods by using water soaked "hessian" cloth to provide the "coolant" for the evaporation process to cool the inside temperature of the "safe". Items such as meat,cream/milk/butter and cool "drinks" are a few perishables that need cool environments , especially in isolated "ice free" locations. Cities during this time period had large "ice works" which delivered block ice to all areas that required a form of refrigeration. These ice blocks where held in early refrigerators to keep perishables cool to cold. This "Coolardie" safe was the next best thing for isolated rural households and travellers/campers/stockmen to provide a cooler environment for foodstuff affected by heat. Ice filled "esky" coolers and ice boxes are a modern day off shoot to the original Coogardie safe however they still rely on ice or frozen coolant bricks for cooling.This "Coogardie" safe is very significant to the Kiewa Valley and the Bogong High Plains because it represents not only the initiative thinking of the early settlers and communities but also the "primitive" solution to an everyday (1800s to 1930s) problem (before gas and electric run refrigerators) of keeping "perishables" at a low temperature and thereby prolonging their "shelf" life. This was before electricity and gas was available to the inhabitants of the Kiewa Valley and Bogong High Plains. Another cooling method for food was to have "water tight" containers dipped into the very cold streams running from the "cooler" alpine mountains and the Bogong High Plains. This however could not be carried out in all situations eg. fast flowing currents and locations away from streams. This "Coolgardie safe" is made from a medium grade steel enclosure and its appearance is of a perforated box with a wire handle and one side (long side) being a hinged "door" with a clasp securing "lock". There are air holes grouped into a small "boxed" pattern. Each "box" is divided by a crossed pattern, dividing the "holed" sections(4) into a diamond configuration of 49 small holes each. There are four sides (long) which have the perforations except for the base which does not. The base has an indentation with a loose "catch" tray to catch water spills. When in use the "box" is covered with a water "soaked" cloth. The wet cloth is used as "coolant" ie. fibers in the cloth hold the water droplets seep out evaporating the area and thereby (in mass) cooling the air inside the container.domestic refrigeration cabinets, coolgardie "safe", insect and vermin proof food containers, electric and gas free cold storage containers

A Gunter’s Chain, an old land surveying instrument, is named after its inventor, Edmund Gunter (1581-1626), an English mathematician and astronomer. It was first produced in 1620. The tool has 100 links and is 66 feet or one chain long. The links are marked off in groups of ten by metal tags or rings. A quarter chain (25 links) is called a rod or pole and ten chains make a furlong and 80 chains a mile. The traditional cricket pitch is 22 yards or one chain long. This chain is said to have been used by Gilbert Nicol when the Warrnambool to Hamilton Road was constructed in the 19th century. Gilbert Nicol was an early settler in Warrnambool who, with John Craig, established the first hotel (and the first building) in Warrnambool in 1847. Nicol later owned the property ‘Rosehill’ in the Warrnambool area. As the chain was given to the Warrnambool and District Historical Society by the Town Clerk, Keith Arnel, it is likely that the chain was one of the items in the old Warrnambool MuseumThis Gunter’s Chain is of importance because it is an early land measuring device that was used for over 250 years and has great historical and mathematical significance. If it is correct that it was used by Gilbert Nicol when the Warrnambool to Hamilton Road was built then it has considerable local significance and dates back to the 19th century. This is a metal tool which consists of 100 metal pieces or links joined together by loops at each end with two metal loops in between each link. The links joined together form a chain. The two ends of the chain have small metal handles attached. At intervals along the chain there are additional rings or metal pieces attached. The metal is very rusted.gunter’s chain, land measurement tools, history of warrnambool

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. Clover, to spare the patient the unpleasantness of induction with his "closed" inhaler (1877), suggested the "mitigated-ether" technique. The inhaler was fitted with a bypass tap for the reception of N2O. The bag was filled with the gas and anaesthesia was inducted a combination of N2O and asphyxiation. Ether was then admitted gradually by rotation of the bowl of the inhaler. When the patient had been duly "weaned over" to ether, the mask was lifted, the N2O allowed to escape, the bag refilled with exhaled air, and normal anaesthesia "a la Clover's inhaler" was continued.Metal domed chamber with a bulb attachment for rebreather bag, including a tap mechanism. Remnants of the paper rebreather bag are attached to the bulb. At the other end is a yellow facemask made of plastic (probably celluloid). The manufacturer's logo has been moulded into the dome of the chamber.Manufacturer's logo: THE HOLBORN / SURGICAL INSTRUMENT CO. LTD. / LONDON •Blue sticker with white writing: O.2.4.joseph clover, mitigated-ether, nitrous oxide, n2o, closed method

The firm of Alexander Shanks & Sons Ltd of Arbroath, were engineers, founders and boiler makers the company was incorporated in the year 1893. At the Dens Iron Works, purchased by the firm in the same year, a wide variety of products was manufactured including cranes, hoists, pumps and lawnmowers. In the 1960s the firm was taken over by Alexander Shanks (1801-1845) was an Inventor of the modern lawnmower, who lived in Arbroath Scotland. While credit is usually given to the Englishman Edwin Budding (1795-1846) for the invention of the lawnmower, it is Shanks' machine which was the direct predecessor of the modern mower. Shanks' innovation was a machine which rolled the grass as well as mowing it. Although Shanks himself died at a young age, his son showed the mowers at the Great Exhibition in 1851 which led to a successful business that continued into the 20th century, supplying mowers to cut the tennis courts of Wimbledon, the cricket grounds at Lords and the Old golf course at St Andrews. The firm was also well known for the manufacture of portable steam engines and steam cranes. In 1968, the company was taken over by Giddings & Lewis Fraser Ltd, Engineers of Arbroath. The subject item is a good example of an early lawn mower made by the company that is credited with being the first to patent and manufacture such a machine. The company Alexander Shanks founded was known throughout the world as significant manufactures of large steam machines used from the middle of the 19th century to the first quarter of the 20th century. The subject item is now regarded as a collector's item.Lawnmower, cast iron handles has two wooden ends and two wooden rollers at front. Blades driven by chain fixed to metal roller. Shanks's Standard Chain. Shanks's Standard Chain Arbroth London. Alex Shanks & Sons Ltd Engineers Arbroth Londonflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, hand mower, lawn mower, mower, shanks, arboth

Karl Duldig

John and Emma Propert emigrated from England in 1877 and settled in New South Wales . Several of their 11 children became talented inventors, designing items ranging from kitchen utensils to coaches and later pop-up caravans. One of the most successful was Charles, who designed and built kitchenware over many decades. His earliest invention was irrigation equipment including patenting the common backyard rose sprinkler. Propert became a household name when he began making a wide range of kitchen implements decades including flour sifters and chip cutters. By the 1970s Propert was Australia’s leading brand of kitchen and bathroom scales. By far the most successful product was a ball-driven egg beater, trademarked as the Ezy Whisk or Swift Whisk. In the days before electric beaters, the Ezy Whisk and Swift Whisk were market-leaders and were exported world-wide. Charles Propert and his son Bertram manufactured more than a quarter of a million egg beaters a year in the early 1950s which explains why so many are still in use today.These items are significant because they were widely used throughout Australia in the 1950s by a major Australian manufacturer.Two Propert's kitchen appliances - a stainless steel Whistling Egg Timer and a Swift Whisk BeaterOn Egg Beater : A PROPERT PRODUCT MADE IN AUSTRALIA PATENT BALL DRIVE SWIFT WHIP STAINLESS STEELkitchen utensils, propert kitchen appliances

The Moulin Legumes No. 3 food mill is a useful manual kitchen utensil for milling, sieving, grating and pureeing various food types (legumes, vegetables, fruit and herbs). The food is placed in the chamber and the handle is turned to push the food through the holes in the blades and into a bowl placed below it. The various blades allow choice of consistency as they have different sized holes. It was in use before electric food processors were invented and is still used in modern times. The vegetable mill was invented by the French inventor and industrialist, Jean Mantelet, in 1932. Inspired by his wife, he invented the mill, which simply and quickly made cooked food into puree or mash. He said "My greatest pride is to rid women of a daily chore." The business started using the brand Moulinex in 1956 and today is it a household name linked to useful and good quality kitchen utensils and aids. The name comes from combining the words Moulin Express, which was an electric coffee mill. The embossed text "BREVETE S G D G" was a type of French patent without a government guarantee. It stopped being used in 1968. This Moulin is an example of a kitchen utensil used before electric food processors were invented, and had gained popularity to process foods such as vegetable's, fruit, nuts and herbs in a domestic or commercial kitchen. The first model of the Moulin Legunes was invented in 1932 by French industrialist Jean Mantelet to meet the reduce labour for housewives in the kitchen. Millions of this labour saving device have since been sold. Food mill, metal, for manually processing food. Conical-shaped food chamber, two U-shaped handles on opposite sides, two clips inside. Three interchangeable twelve-sided cutting blades, each with different sized holes. Made in France. Model is Moulin Legumes No. 3. Impressed into the side, within a circle "MADE IN FRANCE - BREVETE S G D C -" and in centre "2" (Brevete is French word for Patent)flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, made in france, french kitchen utensils, moulin, food preparation, kitchen utensil, food mill, food processor, sieve, moule, mouli, grater, puree, hand operated, moulin legumes no. 3, vingage, kitchen gadget, moulineux, jean mantelet

These folders contain the historical notes written by Bruce Morris in regard to the life story and achievements of George Lance. These notes were used by Bruce Morris to write a great number of historical articles on George Lance and these were mostly published in the Warrnambool Standard. Bruce Morris (1903-1986) was the editor of the Warrnambool Standard from 1946 to 1968. During that time he was prominent in community activities in Warrnambool and was well-known for the great number of historical articles he published in his paper, making him one of Warrnambool’s most important historians. George Lance, the subject of the notes in these folders, was Bruce Morris’ grandfather. George Lance (1933-1901) was a plumber particularly associated with the development and use of gas power in Warrnambool and the inventor of the Eureka Pump and the Lance Patent Cess Pan. He was also a writer of historical articles, a musician with the Warrnambool Artillery Band and an important artist in the town, with some of his works of art in the Warrnambool Art Gallery today. He is regarded as the person most responsible for the establishment of the Warrnambool Art Gallery in the 1880s. Bruce Morris’ notes include material on George Lance’s involvement with the Warrnambool Bowls Club, the School of Arts, the Mechanics’ Institute, the Baptist Church and the Manchester Unity Independent Order of Oddfellows.These folders are of considerable importance as they contain the historical notes of Bruce Morris regarding his grandfather, George Lance. Both Bruce Morris and George Lance are significant in Warrnambool’s history, the former as an important historian and newspaper editor and the latter as an inventor, writer, artist, musician and a person regarded as the 19th century founder of the Warrnambool Art Gallery .1 This is a lime-green rectangular-shaped folder made of stiffened cardboard with a black plastic handle on the top with a black plastic catch on the side. Inside the folder are paper inserts that fold up in concertina fashion. In the inserts are twelve blue plastic folders that contain handwritten and typed material. .2 This is a purple rectangular-shaped folder made of stiffened cardboard similar to .1 above. It has a black plastic handle on the top and a black plastic catch on the side. Inside the folder are paper inserts that fold up in concertina fashion. In the inserts are twelve blue plastic folders that contain handwritten and typed material. George Lance Folders. Bruce Morrisbruce morris, warrnambool, george lance, warrnambool, history of warrnambool

The Melbourne and Metropolitan Board of Works (MMBW) plans were produced from the 1890s to the 1950s. They were crucial to the design and development of Melbourne's sewerage and drainage system. The plans, at a scale of 40 feet to 1 inch (1:480), provide a detailed historical record of Melbourne streetscapes and environmental features. Each plan covers one or two street blocks (roughly six streets), showing details of buildings, including garden layouts and ownership boundaries, and features such as laneways, drains, bridges, parks, municipal boundaries and other prominent landmarks as they existed at the time each plan was produced. (Source: State Library of Victoria)This plan forms part of a large group of MMBW plans and maps that was donated to the Society by the Mr Poulter, City Engineer of the City of Kew in 1989. Within this collection, thirty-five hand-coloured plans, backed with linen, are of statewide significance as they include annotations that provide details of construction materials used in buildings in the first decade of the 20th century as well as additional information about land ownership and usage. The copies in the Public Record Office Victoria and the State Library of Victoria are monochrome versions which do not denote building materials so that the maps in this collection are invaluable and unique tools for researchers and heritage consultants. A number of the plans are not held in the collection of the State Library of Victoria so they have the additional attribute of rarity.Original survey plan, issued by the MMBW to a contractor with responsibility for constructing sewers in the area identified on the plan within the Borough of Kew. The plan was at some stage hand-coloured, possibly by the contractor, but more likely by officers working in the Engineering Department of the Borough and later Town, then City of Kew. The hand-coloured sections of buildings on the plan were used to denote masonry or brick constructions (pink), weatherboard constructions (yellow), and public buildings (grey). This plan covers parts of Sackville Street, John Street, Thomas Street and Cotham Road, and includes several very large houses in Sackville Street. Job Smith built ‘Berrington’ in about 1888-90 for himself, and ‘Pomeroy’ (now ‘Merridale’) in 1885 for James Mickleburgh. ‘Heathfield’ was built in 1888 for Henry Eeles, and was one of many fine homes in Kew, Hawthorn and surrounding suburbs designed by prolific architect John Beswicke; it later became “La Verna” and was a Franciscan monastery. Similarly, in Cotham Road, we can see ‘Bella Vista’ (now demolished), and ‘Charleville’, with its double-storeyed arcade frontage, built in 1889 for Charles Donaldson whose family occupied it until 1939. This was renamed ‘Ross House’ by the second owner, Dr. Thomas King, and then substantially restored in the 1960s by the Stillwell family, well known as car drivers and dealers. Bella Vista (later ‘Malinda’) was originally designed by the architect Robert Haddon and built for Abel Hoadley, inventor of the Violet Crumble Bar and many other delicious delicacies. He began by manufacturing jams and pickles in South Melbourne using fruit from his own orchard in East Burwood.melbourne and metropolitan board of works, detail plans, mmbw 1569, cartography

William A Ives worked in New Haven, Connecticut, and surrounding towns of Wallingford and Hamden from 1868 to 1917 and was a prolific inventor of braces and other wood boring tools between 1868 and 1884, when he received a dozen patents for these devices. William A. Ives lived in the New Haven CT area, and his first auger-making activity took place in the town of Hamden. At first in association with the Churchill family who had been manufacturing tools in the area at least as early as 1863. That firm's works had created "Augerville" in Hamden, starting earlier, possibly as early as 1830. Ives became active as part of the Hamden Manufacturing Co. until 1875 (it is thought he may also have started his own business in the interim), and the William A. Ives & amp; Co. was established by 1877. This continued, until William's death in 1888, when The Hamden Mfg. Company became its successor. Ives also registered the name "Mephisto" trademark name with the US patent office that was to be used in connection with augers, auger bits, machine bits as of June 1st, 1909, appearing on items up until at least 1922. It also appears that the trademark was licensed by the Mephisto Tool Co of Hudson New York who continued to manufacture tools under this trademark. Item is significant because its maker was the inventor of the wood auger boring bit and his patent has been used ever since on many different types of bits with little change to the original design.Auger wood screw bit W A Ives Patent Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Marcelling is a hair styling technique in which hot curling tongs are used to induce a curl into the hair. Its appearance was similar to that of a finger wave but it is created using a different method. Marcelled hair was a popular style for women's hair in the 1920s and 30s often in conjunction with a bob cut. For those women who had long hair, it was common to tie the hair at the nape of the neck and pin it above the ear with a stylish hairpin or flower. Accounts vary about the invention of the style, but Marcel Grateau (1852–1936) is widely credited with inventing the hair styling technique in the 1870s. He started with a small salon in Montmartre, Paris where his clients were the poorer classes. As he developed the waving method that would later become the Marcel wave, using heated curling irons, The inventor and stylist emigrated to the United States and changed his name to François Marcel Woelfflé, sometimes reported as François Marcel. He was granted U.S. patents for implements for performing the technique; the first, U.S. patent 806386, entitled "Curling-Iron", was published in 1905, and the second, entitled "Hair-Waving Iron", for an electric version, under the name François Marcel, was published in 1918. His obituary appeared under the name Francois Marcel Grateau in 1936. Originally the irons had to be heated in the fire, but hair easily got burnt until 1924 when electric irons were invented and the temperature could be regulated. A significant item that gives us a snapshot not only into women's hairstyles of the 1920s and 1930s but a look into the social norms of that era. Therefore the item is of social interest in regards to the story it tells and the development of women's fashion in hair styling.Marcel Tongs, metal, used to impart a hair wave by heating and crimping the hairNoneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tongs, curling tongs, hairdressing

Cyril Percy Callister, a chemist by training, became a food technologist and the inventor of the well known spread 'Vegemite'. A Ballarat School of Mines (SMB) student around 1910, Callister then went to Melbourne University where he obtained his B.Sc. in 1914, M.Sc. in 1917 and D.Sc. in 1931. With Sir David Rivett in 1931 he secured the royal charter for the Royal Australian Chemical Institute, becoming president of the Society of Chemical Industry of Victoria in 1935-36. Vegemite, a yeast based spread, and perhaps one of most famous trademarks in Australia, was discovered around 1922 by Cyril Percy Callister. He was hired by the Fred Walker Company (a Melbourne based manufacturer later known as Kraft) as a laboratory assistant to develop a yeast extract spread. It took some years but by 1954 the special Vegemite song 'Happy Little Vegemites' demonstrated the popularity of the spread. Callister was also known for packing cheese in a can to preserve it and developing Kraft processed cheese. he son of a school teacher and postmaster he was born at Chute on 16 February 1893 and died on 5 October 1949. His brother Reginald Clive Callister (1889-1971) was also a student of SMB. (http://www.ballarat.edu.au/about-ub/history/art-and-historical-collection/ub-honour-roll/c/cyril-callister-1893-1949)Red and yellow soft covered book of 208 pages relating to Cyril Callister who invented Vegemite. On Frontispage signed "11th Oct 2012 James Callister"ballarat school of mines, callister, cyril callister, vegemite, william callister