Showing 4832 items
matching wide
-
Bendigo Historical Society Inc.
Clothing - MAGGIE BARBER COLLECTION: COLLAR AND DETACHED SLEEVES, Late 1800's
Clothing. Ladies' collar. Net fabric, entirely sewn into 'pin-tucks' .5 cm deep in the high stand-up collar, and increasing to 7.5 cm at the lower edge of the jabot front. Opening at the back, the jabot is fastened by nine metal hooks, and hand-stitched loops. Collar has a tightly gathered double frill of the tulle fabric, at neck and is held up right by five 'covered' 'bones'. The lower edge of the front and back is edged with a 1.5 cm wide silk fabric frill. Centre lower edge of back has two 59 cm long silk ribbon ties. This ribbon is also attached to the lower edge of the jabot 58 cm and 60 cm long - presumably for the wearer to tie firmly in place. Neckline seam is re-inforced and neatened by an organdie type fabric, hand-stitched in place. Two fine elastic loops (now perished) one 52 cm, one 58 cm would once have helped to hold the jabot in place, with the arms passing through the loops, to keep the jabot in place. Detached sleeves. Net fabric, entirely sewn into .5 cm tucks. Reaching from the wrist to above the elbow. A double net frill edges the wrists, where a 6.5 cm opening, fastens with metal hooks and hand-stitched loops. A cotton tape, .5 cm wide neatens and re-infrces this seam, and a row of chain stitch, in silk thread embellishes the outer side of the seam. Upper edge of the sleeve has a fine binding of silk ribbon.costume, female, cream tucked net collar and jabot -
Eltham District Historical Society Inc
Document - Book, Econsult Planning and Development Pty Ltd, Residential Study: Review of Residential Development Regulations; Final Report; Volumes 1 and 2, October 1991
Report by Consultants Econsult Planning & Development produced under the Steering Committee guidance of the City of Doncaster and Templestowe and the Shire of Eltham recognising a lack of diversity in housing stock to meet changing housing needs. The Study objectives are: *To provide for a wide variety of housing choices and lot sizes *To make housing more accessible taking into account the Australian Model Code *To maintain residnetial amenity by taking into account significant local features *To prepare guidelines and policities which consider slope, lot, size, location, availability of services and significant vegeation. *To determine the housing types and lot sizes, required by new residents in different locationsresidential development, housing -
Eltham District Historical Society Inc
Document - Property Binder, 810 Main Road, Eltham
Photocopy publication: Eltham Methodist Church One Hundred and Twenty-Five Years 1850-1975, Chris Allan editor. History of early Eltham, railway, schools, churches by A Bird. Map of Eltham with sites of significant buildings. Maps church site. Plan of church. Reminiscences by Edna Bill, Val Gangell, Don Brown. Notes by Ken Eckersall, Peter Gray, Ron Hubery. Newspaper article: Lessons in history, Diamond Valley News, 2 August 2000. Newspaper article: Parents stop teachers, Diamond Valley News, 2 August 2000, State-wide preschool teachers strike and Hurstbridge pre-school.main road, eltham, eltham methodist church, eltham uniting church, josiah holloway, hurstbridge pre-school, kinglake national park, churches -
Waverley RSL Sub Branch
Steel helmet Australian Brodie Mk.II
From 1936, the Australians began to explore the feasibility of local production of steel helmets. Actual production by the Commonwealth Steel Company (in conjunction with Lysaghts) began in 1939. Made of manganese steel, it weighed about 1.1kg. Due to lack of machinery to bend manganese steel strip, the helmets were produced with a raw, but bevelled, edge. Almost two million helmet bodies were produced. Australian helmets were painted in sand textured Australian Army Khaki-Green No.3. A wide-meshed knotted net was often worn. The chin-strap was a copy of the British Mk.II. it was made with cloth covered springs and webbing.Green steel helmet with 8/7th RVR colour patch on each side -
Flagstaff Hill Maritime Museum and Village
Textile - Pillow Shams, Daisy Dale, 1844-1900
The two embroidered pillow shams were made by Betty Stones's mother Daisy (nee Dale) Welsh. A number of crocheted and embroidered articles were donated to Flagstaff Hill Museum by Betty Stone who advised that they cover a period of three generations from Sarah (nee Chamberlain) Lees, Ann (nee Lees) Dale, and Daisy Elvena (nee Dale) Welsh. All three were accomplished needlewomen, both Sarah Lees (born 1844) and her daughter, Ann (1865) these women crocheted a wide variety of articles for use in their homes. Today we have a few surviving examples of their skill that has survived the years.This item and others in the collection donated by Betty Stone are significant for their association with the early Warrnambool pioneering families of Chamberlain, Dale and Lees. These families are listed in the "Pioneers' Register" for Warrnambool Township and Shire, 1835-1900, and published by A.I.G.S. Warrnambool Branch. The item is a fine example of early 20th-century needlework and handmade domestic items.A pair of white pillow shams, rectangular in shape with a shallow scalloped crochet edge. The embroidered central design includes a bird motif. Made by Daisy Walsh (nee Dale). Part of the Chamberlain Dale Lees Collection.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, great ocean road, chamberlain family, dale family, lees family, betty stone, warrnambool pioneer, warrnambool genealogy, wangoom, chamberlain dale lees collection, glory box, handmade, craft, manchester, linen, haberdashery, needlework, crochet, pillow shams, bed linen, pillow covers, daisy dale, daisy welsh, betty stone's mother -
Flagstaff Hill Maritime Museum and Village
Clothing - Bib, ca 1910
In the Words of donor, Betty Stone, … “These crocheted and embroidered articles cover a period of three generations- ie. Sarah (nee Chamberlain) Lees, Ann (nee Lees) Dale, and Daisy Elvena (nee Dale) Welsh. All three were accomplished needlewomen; also, both Sarah Lees (born 1844) and her daughter, Ann (b 1865) crocheted a wide variety of articles for use in their homes. A few examples of these items have survived the years.” (NOTE: For additional information please refer to my book Pioneer and Places- A History of Three Warrnambool Pioneering Families ie. Chamberlain, Dale and Lees families) This item is associated with the Warrnambool pioneer families of Chamberlain, Dale and Lees. These families are listed in the Pioneers' Register for Warrnambool Township and Shire, 1835-1900, published by A.I.G.S. Warrnambool Branch. The item is significant for its association with a ‘glory box’ or hope chest’, a tradition of single ladies making and collecting a range of linen and other domestic items in preparation for their future marriage. The item is a fine example of early 20th-century needlework and handmade domestic items.Bib or feeder for a baby, cream coloured, crocheted in a circle with ends shaped to fit around the neck, satin ribbon threaded through crochet border. Part of the Chamberlain Dale Lees Collection.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, great ocean road, chamberlain family, dale family, lees family, betty stone, warrnambool pioneer, warrnambool genealogy, wangoom, chamberlain dale lees collection, glory box, handmade, craft, manchester, linen, haberdashery, needlework, baby clothes, bib, feeder, crocheted bib, crocheted feeder -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Personal Effects, cigarette case c1950, c1950
A silver plated case to hold, and protect from crushing, cigarettes in a coat pocket. A cigarette is a narrow cylinder containing tobacco, that is rolled into thin paper for smoking. "Tailor-made" in relation to cigarettes means cigarettes that have been mass-produced in a factory and usually have a filter tip inserted at the mouth piece. 'Hand-rolled' cigarettes or 'roll-your-own'. were made by the person themselves by rolling thin paper around a pinch of loose cut tobacco. After World War 2 1914- 1918 tailor made cigarettes were mass produced in large factories and were inexpensive and easy to obtain world wide. Residents of City of Moorabbin used a cigarette case like this to carry their tailor made cigarettes in their coat pocketsc1950 A silver plated cigarette case with spring hinge and metal strip inside case that holds cigarettes in place early settlers, market gardeners, silver smiths, jewellers, cigarettes, tailor made cigarettes, craven a cigarettes, phillip morris pty ltd, post world war 2 estates, moorabbin shire, bentleigh, mckinnon, highett, cheltenham, -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Hewitt's (modified), Coxeter
Sir Frederick William Hewitt (1857-1916) wrote one of the earliest comprehensive textbooks on anaesthesia, and designed several pieces of anaesthetic equipment. In 1901, he described his wide-bore ether inhaler, a modification of the Clover Ether Inhaler. Unlike the Clover, it can be refilled with ether while still in use, and the mask is screwed into place so that it "cannot be unexpectedly detached." This version is a modified Hewitt's Inhaler which has a narrower 'ways' than the original Hewitt's, and no water compartment. Additionally, one side of the bowl is made of glass which enabled the person administering anaesthesia to see the level remaining in the bowl. Bowl shaped inhaler with a glass bowl base and metal dome top with a connector which appears to be for a rebreather bag. There is a metal switch at the base of the glass bowl to alter or regulate the flow.Stamped into central tube: COXETER LONDON Stamped into side of metal dome: 6460hewitt, wide-bore, clover, ether, anaesthesia, anesthesiology, anaesthesiology -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Inhaler, Hewitt, George Barth & Co. Ltd, c. 1895
Sir Frederic W. Hewitt (1857-1916), an accomplished and well respected English anesthesiologist, was an expert in the function and use of the Clover Ether Inhaler. In 1901, Hewitt described his modification of the Clover Inhaler. Often referred to as the Hewitt Wide-Bore Inhaler, Dr. Hewitt introduced changes in order to make it easier to breathe through the device and improve the ventilation of oxygen and carbon dioxide. In 1901, Hewitt was recruited to anesthetize King Edward VII for emergency abdominal surgery. This was just a day or so before the new King was to be coronated. He recovered well, and Hewitt became the first anesthesiologist ever to be knighted. (Source: Wood Library Museum)Tall black round topped box with brass hooks at the sides and brass hinges at rear. There is a brown fabric handle on the top. The box has red padding inside the lid and red lining inside the base and sides. There is a round section in the base of the box for holding the round clear glass bottle for ether. There is also a ellipse-shaped metal inhaler on small metal base with a thin metal handle and pipe with bakelite plug attached via a small metal chain. A brown mask is made of brown leather and celluloid which is connected to the inhaler. There is a metal ether measure for pouring the ether.On notecard in box: (B) HEWITT'S INHALER 1895, MADE BY GEO. BARTH & CO LTD., ADVERTISED AS THE SOLE MAKERS OF THE INHALER AND RECOGNISED BY HEWITT IN HIS TEXT BOOK - ANAESTHETICS AND THEIR ADMINISTRATION - AS THE MAKER OF HIS INHALER. / GIVEN BY DR. E.S. HOLLOWAY IN 1951, WHO ACQUIRED MUCH OF HOWARD JONES' EQUIPMENT AFTER THE LATTER'S DEATH. Stamped on underside of glass bottle in a circle: WUBW [illegible] Blue sticker on inhaler: O.2.13. Printed on inhaler under handle: Geo Barth [illegible] / SOL [illegible] Printed on body of inhaler: Full Printed on body of inhaler: 1/2 Printed on inside of leather mask: F35hewitt, sir frederic, jones, howard, inhaler, geo. barth & co. ltd., ether -
8th/13th Victorian Mounted Rifles Regimental Collection
Photograph - Tent-pegging
Trooper C. Ellison, a member of the 8/13 Victorian Mounted Rifles Heritage Troop participating in a display of tent-pegging at a local show. The Heritage Troop of 8/13 Victorian Mounted Rifles was a very public face of the regiment during the 1980s and early 1990s. It conducted one royal escort, several vice-regal escorts and numerous VIP escorts in the border, north-east and wider Victorian locations. The royal duty was at the opening of Hopkins Barracks, Puckapunyal by HRH Prince Charles accompanied by HRH Princess Diana, 31 October 1985. The troop was an extra curriculum activity of serving members of 8/13 VMR. Framed black and white photograph of light horseman engaged in tent-pegging. military, light horse, tent-pegging, cavalry, ellison -
Bendigo Historical Society Inc.
Administrative record - Electoral Roll, 1915
Electoral Roll for the Commonwealth Division of Bendigo, State Assembly District of Bendigo, and State Electoral Province of Bendigo for 1967 (made up to 22nd June 1967). Voting registers, or electoral rolls, are a census of those who were eligible to vote. They are valuable because a country-wide census was not taken until 1911. Early electoral rolls give an individual name, residence, status of property occupation/ownership, and the rate value of the property. Electoral Rolls are arranged by electoral district and subdistrict. Name, Address, Occupation and gender for thirteen subdivisions. Electoral rolls were published by each state during election years. Electoral Roll for the Commonwealth Division of Bendigo, State Assembly District of Bendigo, and State Electoral Province of Bendigo for 1967 (made up to 22nd June 1967). Includes Name, Address, Occupation and gender for thirteen subdivisions. Assembled and bound with string, with a faded light green card cover..electoral rolls, voting in bendigo -
Bendigo Historical Society Inc.
Administrative record - Electoral Roll, 1915
Electoral Roll for the Commonwealth Division of Bendigo, State Assembly District of Bendigo, and State Electoral Province of Bendigo Subdivision of Eaglehawk for 1970 (made up to 2nd January 1970). Voting registers, or electoral rolls, are a census of those who were eligible to vote. They are valuable because a country-wide census was not taken until 1911. Early electoral rolls give an individual name, residence, status of property occupation/ownership, and the rate value of the property. Electoral Rolls are arranged by electoral district and subdistrict. Name, Address, Occupation and gender for thirteen subdivisions. Electoral rolls were published by each state during election years. Electoral Roll for the Commonwealth Division of Bendigo, State Assembly District of Bendigo, and State Electoral Province of Bendigo, Subdivision of Eaglehawk for 1970 (made up to 2nd January 1970). Includes Name, Address, Occupation and gender for thirteen subdivisions. Assembled and bound with staples, with a light grey card cover..electoral rolls, voting in bendigo -
Wodonga & District Historical Society Inc
Photograph - Codling Collection 01 - Wodonga Mall and construction
Miss Olive Codling was a Foundation Member and a Life Member of the Wodonga Historical Society. Many of her prize-winning photos are held in the Society Collection. She also held a range of roles and committee positions in a wide range of Wodonga community organisations. These included the Horticultural Society, the Wodonga Arts Council, the Wodonga Camera Club and the Wodonga Lapidary Club. As the population of Wodonga grew in the late 1960s and 1970s, development focussed on the central section of High Street. The Wodonga Mall was built in 1969 on the corner of Stanley and High Streets in Wodonga and was the location of a variety of small businesses including a chemist and Sarroff's Dry Cleaners.This photo collection is significant as it documents how the businesses and buildings in Wodonga have evolved and contributed to the community throughout the 20th century. A series of 3 black and white photos showing the development of the Wodonga Mallwodonga businesses, high st wodonga, melba theatre -
Wodonga & District Historical Society Inc
Photograph - Codling Collection 01 - Water Tower, High Street, 1980
Miss Olive Codling was a Foundation Member and a Life Member of the Wodonga Historical Society. Many of her prize-winning photos are held in the Society Collection. She also held a range of roles and committee positions in a wide range of Wodonga community organisations. These included the Horticultural Society, the Wodonga Arts Council, the Wodonga Camera Club and the Wodonga Lapidary Club. Elaine Mann was married to David Mann, a successful Wodonga businessman and community leader who passed away in Wodonga in June 2012. David was a member of the Mann family who began their business in Wodonga in 1920. Elaine was a teacher in Wodonga for many years.This photo collection is significant as it documents how the businesses and buildings in Wodonga have evolved and contributed to community throughout the 20th century.THE WATER TOWER is a major landmark of High Street, Wodonga. It began operation from January 1924 until it ceased operation in 1952. It stood unused for a decade until the lower section was modified and put to use as “ The Tower’s Cobbler’s Inn” in 1962. In 1972 Wodonga City Council proposed to demolish the Tower. Their suggestion received an unfavorable response from the city’s citizens, so the Tower still stands today. This image shows High Street and Hovell Street looking to the north The Civic Centre Theatre is on the right in Hovell Street. On the left in High Street is Tower Place on left. On the far left Repco which by 1998 became a Chinese restaurant and remains so in 2021.wodonga businesses, high st wodonga, water tower, hovell street wodonga, high street wodonga -
Wooragee Landcare Group
Photograph, 2004
This photograph of the Wooragee Landcare Area signage was included in the album alongside the statement that, when the photo was taken in 2005, the Wooragee Landcare Group had applied for a council grant for new sifgns with which they could replace the broken sign in the photograph. The sign marks the Woooragee Landcare Area, opened in 1989 by Heather Mitchell, one year after the first meeting of the Wooragee Landcare Group. It also commemorates the 1898 founding of Wooragee Junior Landcare, which they launched with Wooragee Primary School. As stated by the sign, Wooragee Junior Landcare was the first group of its kind in Auatralia, with the nation-wide Junior Landcare organization being launched in 1998. This photograph is significant as a marker of Wooragee Landcare's need for grants and council funding, which is common to many organisations, and for demonstrating the history of Wooragee Landcare and Junior landcare by commemorating the founding of both the Wooragee Landcare Area and Wooragee Junior Landcare. Rectangular landscape colour photograph printed on gloss photographic paper.Obverse: Sign in photograph reads "Wooragee Land Care Area/ Launched by Heather Mitchell/ 6th June 1989/ Wooragee Junior Landcare First in Australia" Reverse: "WAN NA E0NA0N2. AIN+ 1 2906/ -
Shepparton RSL Sub Branch
Binoculars
These binoculars appear to have been made for use by service personnel, carrying a broad arrow symbol on the barrel. The inscriptions "MG" may indicate the manufacturer or initials of the owner. The service number 48582 may indicate that the pair was owned by Lionel James O'Dempsey, a Victorian who served as a Lance Sergeant with the 3 Light Anti Aircraft Regiment during the Second World War.Brass binoculars with cotton cord acting as strap, fastened via a knot on one side of a small loop cast into the side of the barrel. Two cone shaped barrels with circular convex glass disc on each wide end. Each barrel joined together via a joint platform approximately halfway and 9/10ths of the way up the binoculars. Binoculars can change shape by barrels swivelling on a central pin. Binoculars also zoom in and out (i.e. barrel reduces and expands) due to grooved dial in centre of pin. One eye piece missing on left side, right side intact but able to be unscrewed. Barrels are tinted green from copper corrosion and retractable barrel sections have black colouring in parts.Inscribed on centre platform between eye pieces "M G", in the direction of the wearer. On top of adjustable barrels: "[broad arrow] (right side)", "Mk VSP-/48582"second world war, worl war two, world war ii, binoculars, looking glass, surveillance -
Montmorency/Eltham RSL Sub Branch
Medal - British War Medal WW1 2246 Pte Clive Terril Rowe 46-BN. AIF, British War Medal WW1
2246 Pte, Clive Terril Rowe Born Melbourne. Enlisted 17th March 1916 in Sale Victoria, aged 18 years 5 months Pte. Rowe went from the 19th Depot Battalion to the 46th Battalion AIF. Departed Australia 16th August 1916 and returned to Australia 8th April 1919. He was discharged 15th June 1919. While overseas Pte. Rowe suffered trench feet, was wounded (shellshock) and chronic eczema. Pte. Rowe was awarded the British War Medal and the Victory Medal.British War Medal 1914-1920 Instituted by King George V in 1919 to mark the end of WW1 and record the service given.The circular medal is made of cupro nickel with the effigy of George V on the obverse. Around this are the words GEORGIVS V BRITT. OMN:REX ET IND:IMP: The reverse image has St. George on horseback trampling underfoot the eagle shield of the Central Powers and a skull and crossbones, the emblem of death. Above this is the risen sun of victory. The years 1914 and 1918 are contained on the outside edge of the medal. The ribbon has a wide central watered stripe of orange, flanked by two narrow white stripes which are in turn flanked by two black pinstripes, flanked by two outer stripes of blue. The colours have no particular significance. Along the rim of the medal is stamped 2245 PTE.C.T. ROWE. 46-BN. A.I.F. -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1870s-1910s
This clear, green tinged, Half Whirley (or Whirly) salad oil bottle has been handmade by a glassblower from 1870s-1910s. A bottle with such elaborate decoration would have been sought after as there was no need to decant the sauce into another jug or bottle to make it acceptable for table service. It is possible that this bottle was recovered from the Loch Ard, wrecked in 1878. A diver found the bottle on a shipwreck in the coastal waters of Victoria about 100 years from when it was made. The diver who found this bottle has recovered objects from several different shipwrecks between the late 1950s and early 1970s. A sizeable proportion of those objects was from the wreck of the famous clipper ship Loch Ard. This salad oil bottle may very well have been amongst that ship’s cargo. It is part of the John Chance Collection. A paper titled ‘Glass Bottles from the Loch Ard Shipwreck (1878): A Preliminary Study’ by Iain Stuart, (published in Australian Historical Archaeology, 9, 1991) included a study of twelve salad oil bottles from the wreck of the Loch Ard. The bottles were of this same Half Whirley design (half meaning that it was Whirley on the upper half but not on the lower half of the body), as well as the same colour and size. A diagram of one of these twelve bottles matches the bottle in our collection. The paper mentions that eleven of the twelve bottles have a number on their base, just as this one has. It is estimated that foreign and salad oil bottles totalled four percent of all of the bottles carried as cargo on the ship. The Half Whirley bottle has side seams from below the lip to the base, indicating that the bottle was made in a two-piece mould that included the heel, body, shoulder and neck. The fancy ‘whirly’ twist pattern and panelled sides would have been cut into the mould’s inner surface. The uneven thickness of the ridge around the base comes from adding a separately moulded and embossed base after the bottle was removed from the mould. The applied finish (mouth and lip) was also added to the bottle. The elongated bubbles in the glass are evidence of the glass being mouth blown into the mould, thus forming the shape and pattern from the inside shape of the mould. The bottle probably had a glass stopper with a round top and wedge-shaped shank with a ground surface, allowing the bottle to be re-sealed. The ring between upper and lower lip allows the closure to be sealed and anchored. The embossed numbers are either “133” or “833” and may represent a particular bottle pattern, manufacturer or filler. Although the bottle is not currently linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 19th century. This whirley salad oil bottle is matches the whirley salad oil bottles recovered from the Loch Ard in the 1990s, adding depth of interpretation to the array of salvaged Loch Ard artefacts in Flagstaff Hill’s collection. The salad oil bottle is an example of the type of food condiment containers that were used in Victoria’s early days. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks, including the Loch Ard, have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; glass Half Whirley salad oil bottle, green-tinged, with some opalescence. Handmade, elaborately decorated bottle with round neck and base, and five-sided body. Applied double lip; straight upper, flared lower. The lower neck and shoulder have twisted spiral whirley patterns in the glass. The body tapers slightly inwards towards the base. It has five plain panels, one wider than the others. Side seams run from below the lip to the heel. The heel of the bottle is uneven in width, height and density where it joins the body of the bottle. The base is not level. Embossed characters on base. Glass has elongated bubbles towards the base and orange-brown sediment inside, on one side. Embossed "133" or “833” (the first character may be an “8”) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, 19th century bottle, collectable, bottle, green glass, tinged green, two piece mould, food bottle, oil bottle, salad oil bottle, whirley, whirly, half whirley, condiment bottle -
Bendigo Historical Society Inc.
Accessory - Walking canes
Six walking canes shaped from natural timber. 7543a Light coloured wood with top carved in shape of a snake head. 7543b Light brown wood with T shape carved top. 7543c Dark brown branch with bark intact. Natural branch at 30 degrees cropped at top. 7543d Thin dark brown bamboo like straight walking stick. Ornate carved knob at top. 7543e Light brown straight walking stick of three pieces of wood spliced together. Curved top spliced in place. Lacquered and polished. Metal band attached below hand grip (1.5 cm wide.) 7543f Rough natural branch with natural handle at 30 degrees angle.walking sticks, wooden objects, natural wood -
Bendigo Historical Society Inc.
Clothing - MAGGIE BARBER COLLECTION: PINK SILK DRAWSTRING BAG, Late 1880's
Clothing. Pink silk satin drawstring bag, with a sheer pink organza overlay. A 1 cm wide silk ''drawstring'' passes through eight 1.3 cm diameter plastic rings, sewn inside the bag, 4.5 cm from the top, creating a 4.5 cm frill when closed. The top edge of this frill, is decorated with cm long glass beads and tiny round glass beads. The lower edge of the bag is gathered in tightly, and a silk tassell, decorated at the head, with tiny red, dark and light blue, and white beads. The tassell falls from a thread covered cone shape, 2.3 cm long, and decorated with yellow, red, blue and white beads. The inside of the bag is lined with silk organza.costume accessories, female, pink silk drawstring bag -
Bendigo Historical Society Inc.
Clothing - CREAM SILK EVENING CAPE (RELATED TO 11400.842)
Cream silk, woven in a jacquard style, featuring a floral design. Fully lined with cream silk satin. A 4cm deep, stand-up mandarin style collar. Eight metal hook and eyes fasten the front in a concealed way. Heavy cording, finished with pearl trimmed tassels,a double inverted pleat, 22cm long at the centre back hemline. Three darts at shoulders giving a 'sleeve-like' shape. Lower edges of which are elaborately corded. A 12cm'slit' at the lower edge seam with the front panel gives more flexibilty to the wearer. Tassel head and decorative 1.5cm ''ball'' are woven in a ''turks head'' style. A 2.5cm wide silk ribbon, attached at centre back, and possibly tied around the waist.A card with the cape is hand written - ''For Historical Soc.if wanted, From M.Bush's Collection. Could have been from Mrs. Mueller's. Gift from Mrs. E.G.JARRETT''costume, female, cream silk evening cape -
Southern Sherbrooke Historical Society Inc.
Photograph - Photo - Bill Hermon with his mother, Alice, his father, Bill senior, his aunt, Kitty Quixley, and the family dog, during construction of a shed
B&W photo of a group of people in front of a partially constructed farm shed. Bill Hermon is seated on the ground in front. He is wearing shorts, long socks, a dark jacket and white shirt, and is holding the family dog. Seated behind him are his aunt, Kitty Quixley, wearing a dark skirt, top and cardigan, a string of beads, possibly pearls, and holding what appears to be a wide-brimmed hat on her lap, and his mother, Alice, who is wearing a dark skirt, dark top, and lighter jacket or cardigan, and who appears to have a large brooch or ribbon pinned to her chest. Standing behind Alice is Bill Hermon snr, wearing a dark suit, light shirt, and dark hat. -
Southern Sherbrooke Historical Society Inc.
Photograph - William Hermon Snr and his bullock team in Ferntree Gully, 1913
B&W photo showing a 10-strong bullock team pulling a wagon laden with timber. William Hermon Snr, dressed in a loose dark three-piece suit, pale shirt and dark hat, is standing to the right of the image. He carries a long bullocky's whip over his right shoulder. Another man in waistcoat and shirtsleeves and a pale, wide-brimmed hat stands beside him. A third man in suit and hat stands behind the team. There is a post and rail fence which then becomes a picket fence in front of a treed area, and then a large weatherboard building which is apparently the Centre Hotel (now Middle Hotel?) in Upper Ferntree Gully. The photo is mounted in a fancy frame. Dated 1913. -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s - set of 2, State Electricity Commission of Victoria (SECV), 1945?
Yields information about one of the first two maximum traction bogie trams in Ballarat in October 1945 after it had been repainted for use in Ballarat by the SEC and the Lake / depot area at the time.Black and white photograph of SEC No. 15 in Wendouree Parade just to the south of St. Aidans Drive. Photo taken looking south with the trolley pole to the camera in the raised position. Appears to be a new trolley rope. Tram has destination of "Gardens via Drummond Nth". Possibly taken soon after receipt and repainting in Ballarat in 1945. "The Ballarat Tramways" notes that No. 15 arrived in Ballarat October 1945 and was renumbered to No. 36 in 1953. Print made by John Phillips c1995. Print used in the interpretation panel at Gardens Loop - believed to be an SEC photo. 2135.1 - as above by wider to the left, shows more the lake. Added 13/4/2009. See The Ballarat Tramways. Additional large print added 21/3/2021.2135.1 - on rear "Delivered from Melbourne in 1945" "Car 15, renumbered 36 in 1953 in order to consolidate the bogie cars from car 34 onwards." and "William F Scott:" address label.tramways, trams, wendouree parade, bogie trams, tram 15 -
Kew Historical Society Inc
Plan - Subdivision Plan, Old Kew Golf Links Estate - Third Section, 1920-1929
Pru Sanderson, in her groundbreaking ‘City of Kew Urban Conservation Study : Volume 2 - Development History’ (1988), summarised the periods of urban development and subdivisions of land in Kew. The periods that she identified included 1845-1880, 1880-1893, 1893-1921, 1921-1933, 1933-1943, and Post-War Development. These periods were selected as they represented periods of rapid growth or decline in urban development. An obvious starting point for Sanderson’s groupings involved population growth and the associated economic cycles. These cycles also highlighted urban expansion onto land that was predominantly rural, although in other cases it represented the decline and breakup of large estates. A number of the plans in the Kew Historical Society’s collection can also be found in other collections, such as those of the State Library of Victoria and the Boroondara Library Service. A number are however unique to the collection.The Kew Historical Society collection includes almost 100 subdivision plans pertaining to suburbs of the City of Melbourne. Most of these are of Kew, Kew East or Studley Park, although a smaller number are plans of Camberwell, Deepdene, Balwyn and Hawthorn. It is believed that the majority of the plans were gifted to the Society by persons connected with the real estate firm - J. R. Mathers and McMillan, 136 Cotham Road, Kew. The Plans in the collection are rarely in pristine form, being working plans on which the agent would write notes and record lots sold and the prices of these. The subdivision plans are historically significant examples of the growth of urban Melbourne from the beginning of the 20th Century up until the 1980s. A number of the plans are double-sided and often include a photograph on the reverse. A number of the latter are by noted photographers such as J.E. Barnes.When the old Kew Golf Links was subdivided in the mid 1920s, the developers were able to break the sale into sections. The third section included eighty lots. The lots faced Kilby Road, Kodak Avenue, Belford Road, Baker Avenue, Mathers Avenue, and White Avenue. [Kodak Avenue was renamed Page Avenue at a later date].The ‘Kew Conservation Study (1988) notes that ‘On the subdivision plan, Kodak’s involvement is commemorated by the naming of the streets after Company directors, and their decision to not proceed with the construction of the factory is explained as a response to the increase in the value of the land. This explanation may have been Estate Agent’s hyperbole, as the Kodak Company records suggest that the land, with its wide creek gully, was unsuitable and too small for its purposes.subdivision plans - kew, old kew golf links estate - third section -
National Wool Museum
Machine - Knitting Machine, Coppo, 1960s
The knitting machine is a recently designed instrument, especially when it is compared with its ancient counterpart, the loom. It enables the creation of many metres of fabric very quickly. A knitting machine is composed of a series of needles which mimic the process of manual knitting. The mechanism engages numerous mechanical elements simultaneously and enables the creation of many metres of fabric very quickly. In addition, a knitting machine can be setup to produce unique bolts of fabric. The density of the fabric may be modified and a knitting machine can produce double-faced effects. A doubled-faced effect creates colour combinations through the introduction of an additional colour to the knitting pattern. This knitting machine is a Coppo brand. It contains over five hundred needles and was produced in the 1960s. It is a representation of the best available in the world at that time. Originating from Italy, it was designed for commercial use. Through both precision and capacity, Italian artisans were seen to be the best in the world of textiles and knitwear. Through emigration, globalisation and the regularly available quantities of wool, Australia came to compete on this stage. The owner of this particular machine migrated from Italy in 1959. When she did, she brought with her a Dubied knitting machine. She later replaced it with this Coppo. When in Australia the owner began work as a piece worker, knitting jumpers and worked for some of the iconic names in the Australian knitting trade including ES Poratt and Alpin Manufacturing. The owner’s role progressed from a piece worker to a wool garment designer and she won many Wool Industry Awards in the 1970s and 1980s. Her high quality of work using and her individual custom designs were spoken about by many of her customers and she had a very large private clientele. She designed and knitted fully fashioned tailored jumpers for people for around 30 years.Knitting table sits on a stand with wide metal legs. Legs contain lettering 'COPPO torino'. Legs are connected via three thin metal poles as well as a metal band and the bed of knitting table at top. The connecting metal band has the lettering 'SUPER - COPTAL' attached. The Knitting table itself contains two beds and a bench at the rear. Attached to the bench is a thin metal structure for the elevation of yarn. It has four crane esk structures above on this metal structure. The bench is covered in a pale grey laminate in the imitation of wood. Attached to the knitting bed is a sliding contraptions containing two handles at the front followed by a complex semi-circle sliding mechanism used to move the knitting mechanism front and back.Left Stand. Lettering: Coppo Torino Right Stand. Lettering: Coppo Torino Centre Stand. Lettering SUPER - COPTALcoppo, knitting machine, design, italy, wool, business, migrants -
Melbourne Tram Museum
Photograph - Set of 4 Black & White Photograph/s, Melbourne & Metropolitan Tramways Board (MMTB), Early 1970's?
Set of four Black and White photograph of recovery equipment for tramcars. Two prints of each except - .4 .1 - steel beam shown in position in the saloon portion of a tram used to secure a bogie to the body of tram with steel section over transom and showing lifting hooks and securing or lifting bolts. Shown in position where the tramcar body floor was above that of the tramcar transom. .2 - ditto, but on an angle in a wide body tram where the top of the transom matched the top of the floor. The bogies are on an angle. .3 - brackets in position for securing the body spring on the truck fitted to tram 980 to the body of the tram. .4 - brackets shown stored inside the cabin of the tram. Mid 1970's? Photographer likely MMTBtrams, tramways, recovery, accidents, tramcars, sw6 class, pcc class, w2 class, tram 980, st. louis b3 -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Footwear - Clothing, lady's shoe heel grip, 20thC
Heel grips are used inside shoes to prevent the feet slipping and rubbing against the leather and so preventing blisters. They also protected the stockings from wear thus giving them longer life - an important factor when nylons were expensive or difficult to obtain eg wartime, depression.Heel grips help obtain a firmer shoe fit, prevents slipping, chaffing and blisters, restores the worn lining of favourite shoes and give extra life to hosiery. In 1912, Wittners Shoes Pty Ltd started as a family business with one Melbourne retail store and has grown to over 75 Australia wide, dedicated to designing high quality fashion footwear. A 'Superb' velvet heel grip insert for a lady's shoesTHE "SUPERB" / VELVET / HEEL / GRIP / ASSURES COMFORT / AND EXTRA WEAR / FOR YOUR HOSIERYshoes, footwear, moorabbin, bentleigh, cheltenham, hosiery, stockings -
Churchill Island Heritage Farm
Tool - Crosscut Saw
Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.Steel. Designed with bow in middle of blade. Small offset. Original ends in good conditions. No handles.churchill island, crosscut, saw, tool -
Churchill Island Heritage Farm
Tool - Crosscut Saw
Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.one end original minus handle. Other end has replaced handle. Steelchurchill island, crosscut, saw, tool, machinery