8415.1 - Metal rod that flattens out into a wide, shovel-like paddle. Used to break though hard clay.

Blue felt banner with gold and blue screen printing of MOK symbol. The banner is on a rod and has gold fringing."METHODIST ORDER OF KNIGHTS HIGH COURT VICTORIA AND TASMANIA" methodist order of knights, methodist order of knights high court victoria & tasmania

Blue felt banner with gold and blue screen printing of MOK symbol. The banner is on a rod and has gold fringing."METHODIST ORDER OF KNIGHTS NTH. FITZROY COURT EPWORTH. No.100" methodist order of knights, methodist order of knights nth fitzroy court epworth no 100, court epworth no 100

A thumb flicker book featuring instructional action shot images of Rod Laver. Materials: Paper, Ink, Metaltennis

Item issued to Rod Hosking RACT CMF BendigoPeaked cap, khaki RAATC badge made in 1983 , it has a leather band around front brim held by a brass button on each side. uniform - army, costume - male headwear, peak cap

This bamboo fishing rod was used in the mid to late 1900's and demonstrates that local production of recreational fishing poles was at a high level and their demand was high. Imported recreational sporting goods from either the United Kingdom, the United States of America or Asia countries was due to the larger lead up times from these suppliers and the greater import costs from slower ocean supply ships. It was only after World War II that the trade influx from other countries has supplied cheaper goods. This recreational fishing pole is highly significant to the Kiewa Valley as it demonstrates that recreational fishing has been evolved from the need to supply a balanced diet by the early pioneer families of fish from the major Kiewa rivers. The ability of the Kiewa Valley rivers to provide a good fishing environment (high protein diet) for both early indigenous families and early pioneers was the important food source that provided for a balanced diet and the higher level of nutritious development of both body and mind. This two piece wooden fishing Rod is made from bamboo shafts or poles, one length thicker than the other. The smaller diameter shaft is the top end and fits into the longer thicker shaft at a stainless steel tube end.The smaller shaft has a stainless steel reinforcement ring where both shafts fit together. At the bottom end of the thick shaft is a black rubber "stopper" or "foot". There are two stainless steel rings, each with a reel holding "bulge" which allows for the the reel's "prongs" to be secured. The top ring has a greater diameter allowing it to move up and down the shaft/pole to secure the top "prong" firmly onto the shaft/pole.recreation, river, rod, fishing, industry, fish

.1) Leather, Stitched pistol holster with brass fasteners. .2) Brass cleaning rod for pistol, sits in the back holster.“Australia [left arrow]” tooled at top of holster under .military history - equipment, trades-leatherworking, passchendaele barracks trust

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. The iron was heated over a fire or in a charcoal brazier. Soldering irons were primarily used by tinsmiths and coppersmiths to work with thin sheet metal. These hand soldering irons have been replaced by electric ones.Used by coppersmiths and tinsmiths and workers in the Kiewa Valley.The soldering irons have a wooden handle, an iron rod and are made of copper at the pointy end (the bit).shaped like a pyramid.soldering iron, hand tool, coppersmith, tinsmith

The Thomas splint is still used in war zones today. It was invented in the late 19th Century by pioneering surgeon Hugh Owen Thomas, often described as the father of British orthopaedics, born in Anglesey to a family of "bone setters". He created the so-called 'Thomas Splint', which would stabilise a fractured femur and prevent infection. This item was used for a child with a broken thigh bone.This item is an example of an early piece of medical equipment.Thomas splint is a leg splint consisting of two rigid rods attached to an ovoid padded ring that fits around the thigh.splint-thomas orbost-hospital medicine-nursing

Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Metal obstetric tool. Stainless steel rod with rounded large blunt hook at one end and crotchet hook at the other.destructive instruments

This douche syringe was in the collection of Dr Frank Forster.Douche syringe consisting of a hollow bakelite rod with a red rubber bulb. Imprinted in black, "CORONET GUARANTEED", "ENGLISH MADE".irrigation

Used for buttoning up shoes by the internees at camp 3Decorative metal button hook and holder. Holder is an almost oval shape. Hook is in a groove and attached by a small metal rod.

Black and white photograph taken of Rod Twining and a student tree planting on Tambo Waterboard property East Gippsland Victoriarevegitation

Black and white photogrpah of Rod Laver at Wimbledon. Press shot by Fox Photos. Copied 1977. Materials: Ink, Papertennis

A red silk banner with frills advertising the film 'Khartoum.' On the banner are the words 'Charlston Heston Laurence Olivier in Khartoum Ultra Panavision Technicolor United Artists.' Attached by staples to the back of the banner is a piece of green material with a handpainted picture of flowers. The banner hangs from a rod. At the end of the rod are 2 finials.entertainment, film, 'khartoum', lydia chancellor, collection, banner, 'khartoum, ' film, theatre, actors, acting, drama, entertainment, performing arts, person, male, individual, objects, recreations, theatre

Tapestry wall hanging made in China featuring a fluffy woollen tiger on a background of looped wool. The background features mountains, sky, foliage and ground. Chrome rod hanger with three looped sections of blue wool over the rod and a red, white and black hanging cord. Blue fringe lower edge.

In 1951 Victoria commemorated 100 years of the Victorian Parliament. A protective lined keepsake box contains a black rod (in two parts) with a small plaque: "Presented by [the] silver and electroplate ware Manufacturers Association. Made by Harold C. Hutchinson, Eltham. It was first used in 1954. Black Rod is best known for their part in the ceremonies surrounding the State Opening of Parliament and the Speech from the throne. They summon the Commons to attend the speech and lead them to the Lords. As part of the ritual, the doors to the chamber of the House of Commons are slammed in the approaching Black Rod's face. This is to symbolise the Commons' independence of the Sovereign. Black Rod then strikes the door three times with the staff, and is then admitted and issues the summons of the monarch to attend. - Wikipedia This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, eltham, black rod, harold c. hutchinson, victorian parliament, parliament house, ceremonial, ceremony, box

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork