Tie shape preserver is made of cork and has a slight curve.Tie was placed over the preserver to stretch out the creases."With Compliments From Berryman & Bryant Tie Specialists Yarrawonga".tie, preserver, shape.

Photographs pasted on board with descriptions. (1) Kauri Pine (Agathis robusta)." (2) "Cork Oak (Quercus suber)." kauri pine, cork oak, trees, history

Army issue water bottle as made by GMHMade by GMH 1940Black metal water bottle with cork stopper in neck. Tan leather carry rack including shoulder strapmilitary, water bottle, leather holster

BHS CollectionDark green glass bottle half full. Small part of label left but unreadable. Cork in. Keep upright.

A wooden racquet with a rippled throat, red whipping with parchment supports, and cork-inlaid handle. Inscription across the throat and stem of the obverse: BUSSEY/DEMON/DRIVER/1/EXTRA/LIGHT/GGB/BUSSEY'S/TENSIVE/GRIP. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Parchment, Corktennis

Number stamped on leather strapping around the bottle is “435891” This matches Flying Office Mervyn Albert Henry Schramm who enlisted 8/10/43 and was discharged 20/12/45 and was posted to RAF Station Gampston. The name written on the felt bottle cover possible “lowein” ?? Does not match any on the DVA rolls.Military Issued Water Bottle. Bottle in blue tin metal but is fully bound in brown felt material. Wrapped around felt is a leather strap that hooks over the shoulder. The water bottle is capped by a cork top with a metal hook into a wooden top on the cork. Lid is attached to the case by a piece of string. Written on the felt case cover in black pen a name appears to be "Denis Lowein". Stamped on leather strap No. “435891”, also on side strap "R.A.A.F K.W (over)194?"raaf, gampston

Webbing, Patten 37 with two ammunition pouches & a felt covered enamel water battle with cork attached. Khaki in colour.On belt: “MTK D [up arrow] D 1956 Normal” Handwritten: “Mangano 545125” On belt & underside right shoulder strap: “Hennequin 3203281”military equipment - kit bag - army, webbing, passchendaele barracks trust

This bottle was made in Scotland and recovered decades later from a shipwreck along the coast of Victoria. It may have been amongst the ship's cargo, its provisions or amongst a passenger's personal luggage. It is now part of the John Chance collection. Stoneware bottles similar to this one were in common use during the mid-to-late 19th century. They were used to store and transport. The bottles were handmade using either a potter's wheel or in moulds such as a plaster mould, which gave the bottles uniformity in size and shape. The bottle would then be fired and glazed in a hot kiln. Makers often identified their bottles with the impression of a small symbol or adding a colour to the mouth. The manufacturer usually stamped their bottles with their name and logo, and sometimes a message that the bottle remained their property and should be returned to them. The bottles could then be cleaned and refilled. DUNDAS POTTERY WORKS - The Dundas Pottery works were established in 1828 by William Johnstone in partnership with John Forsyth and John Mc Coll. Located where the Forth and Clyde Canal joined the Monkland Canal, North of Glasgow. Johnstone sold the pottery in 1835 to Robert Cochran and James Couper. Mc Coll was retained as manager until 1837 when in 1839 Cochran & Couper sold the pottery and purchased the St Rollex Glass Works. George Duncan took over briefly but died in 1841, with the pottery possibly being run by his widow Helen and a potter named Alexander Paul. James Miller was the manager at the time and he bought the pottery in 1856, in partnership with John Moody. Miller's long and careful stewardship of the pottery saw success from the export market which allowed him to purchase the North British pottery in 1867 until 1874 when it was sold. In 1875, Miller, in partnership with John Young, leased part of Caledonian Pottery, naming it Crown Pottery, however, it burned down in 1879. In the early 1880s, Young extended the pottery and named it Milton Pottery. Miller’s son, James W., became a partner in Milton pottery in 1905. James Miller Snr died in 1905 and the company continued as a limited liability company, being sold to the Borax Consolidation Ltd in 1929, but it was unsuccessful and Possil pottery purchased some of the company's equipment before it finally closed in 1932. From 1828 until the James Miller period of circa 1856, the pottery produced salt-glazed stoneware for the local industrial trade; mainly bottles and drain pipes. James Miller produced various bottles, whisky and acid jars, casks, butter crocks, jam jars and domestic wares in Bristol glaze. He streamlined the water filter manufacturing, which had become a speciality of the pottery, and a dedicated section of the pottery was created solely for their production, which was exported worldwide.This stoneware bottle is historically significant for its manufacture and use in the late 19th to the early 20th century. This bottle is historically significant for its connection with the well-known stoneware manufacturers, Dundas Pottery of Glasgow, Scotland. The bottle is also significant as it was recovered by John Chance, a diver, from a wreck on the coast of Victoria in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, salt glazed stoneware, beige, sealed with cork and wax, discolouration on upper part. Inscription stamped near base.Stamp: [symbol of concentric ovals], text within the symbol "PORT DUNDAS POTTERY COY." and "GLASGOW". Stamp:[Symbol - square with short vertical line in centre of base line]flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, shipwreck artefact, stoneware, ironstone pottery, bottle, port dundas pottery, glasgow, antique bottle, william johnstone

Brown Ceramic bottle with McWilliams cork. 25 cm high Previous label #134 Ex Mechanics Institute Eaglehawk

Ceramic port decanter in shape of a 7.62mm round. Rising Sun logo on front. Tip of round is removeable to house cork.History of 7.62mm round. 84, F4 on base.port decanter, 7.62mm round

8712.1 - Cast iron cork press with three differently sized indentations that in straight rows, the item is also fairly ornate.8712.1 - Kenrick Sons No. 6

Oval in section, aqua tinted clear glass bottle with text embossed on side panel. Cork stopper in bottom of bottle.'J. BOSISTO & Co PTY LTD REGD No 3990' on side.eucalypotus oil, bosisto

Myer also in Adelaide, South Australia, Australia. Rectangular clear glass bottle with a cork lined platic or Bakelite screw top, paper label and numerals embossed on the base.'F108' and other indistinct figures, possibly E46 in reverse and 'M' embossed on base. Paper label in blue, white and red with text and illustration of large red chemist shop bottle. 'Given internally as a Antiseptic and used when diluted as a Mouth Wash.....Sore and Cracked Skins'. HENRY FRANCIS & CO CHEMISTS MYER EMPORIUM LTD MELBOURNE-ADELAIDE'.glycerine, medical, myer

Glass syringe with cotton bound plunger on a glass stem and cork top, in blue coloured cylindrical container, end missing.

.1 BLUE ENAMEL DRINK BOTTLE .2 CORK HAS METAL TOP WITH EYE. STRING THREADED THROUGH EYE.RIDER & BELLlocal history, military, water bottle, army

Glass tube one with cork stoppers at each end and glass section inside. Used to demonstrate spiral strain cracking

As used in the care and preservation of harness items Imported and sold by Holden and FrostShort round ceramic bottle with cork stopper. Paper label on front that is unreadable other than the words "harness black". Illegible other than harness black on green paper labelharness black, black, equine

Used to maintain and dress saddleryImported and distributed by Holden and FrostSquare shaped glass jar with brown coloured label affixed that has contents printed on. Cork stopper in bottle neck.Frank Millers (Crown logo) crown dressing New York U.S.A.bottle, equine, dressing

Embossing indicates that the brown glass bottle contained Penfold brand wine, a South Australian wine company formed in 1913. This particular bottle was the shape used for their fortified wines and would date between c.1917 and the early 1930s. It was found on the beach or in the sea.The brown glass bottle has a lip and collar with a tall neck and narrow shoulder and would have had a cork stopper. " PENFOLD / THIS BOTTLE IS THE PROPERTY OF / PENFOLDS WINES"

An Ajax 'Calumet' late transitional flat-top tennis racquet, with solid convex throat, and cork handle. Model name features across crown on obverse. Manufacturer's name, with floral design, features across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Gut, Ink, String, Cork, Painttennis

A wooden racquet, with an open throat, green and white whipping, and a cork handle. Inscription across base of head on obverse: PRESIDENT. Inscription across base of head on reverse: DAVEGA/UNITED SPORTS SHOPS/NEW YORK. Materials: Wood, Nylon, String, Cork, Ink, Leather, Glue, Lacquer, Metal, Clothtennis

This item belonged to Dr Geoff Bishop. Similar in appearance to Heath's glass aural syringe.Glass aural syringe with glass plunger, rod with compressed cotton plunger, and (loose) rubber cap [237.2]. The tip of the syringe is elongated and has no attachment for needles. Distal end of plunger has a widened area shaped like a small glass cork. Cottom thread is wound around a small depression. Distal end of plunger has been inserted through a small cork. Above the cork is a wooden cap with a central hole. The head of the plunger has a 'cotton reel' depression and fits into the outside of the wooden cap.irrigation

This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then formed into the flared collar. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive glass, cork-top style. Applied flared lip, slightly bulbous neck with horizontal lines in glass. Shoulder has seam, body tapers inwards towards base. Heel is thick, with concave base, wide inverted pontil, uneven base. Glass has some bubbles, blow lines and imperfections. Sediment inside bottle along one side. Surface of glass is scratched.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, olive green glass

This item is cone in shape and appears to have been sealed with a cork.. Clag glue was sold in these jars in the early to mid 1900's"Angus&co" "CLAG" "ISM12" "PTY LTD" ALL MOLDED INTO THE BASE OF THE JARjar, bottle, glue, clag, bottles, angus and co

A painted black rectangular shaped tin gunpowder flask with original labels on the front and back. It has a wooden cork stopper with gauze.gunpowder-flask curtis&harvey hunting