Showing 438 items
matching side cap
-
Ballarat Tramway Museum
Pamphlet, State Electricity Commission of Victoria (SECV), "Overhead Line Material", Jun. 1937
Yields information about equipment made for Overhead tramway range and materials used and how correspondence was exchanged with the SEC via the Agent General.4914.1 - Letter from The Forest City Electric Co. Limited of Manchester 23/6/1937, to the Agent General for Victoria and the SEC, notifying that they have included within the shipment free of charge, three sample insulators and booklet 15.2. 4914.2 - Booklet or Sheet 15.2, titled "Overhead Line Material" comprising 12 pages showing details of porcelain insulators available from The Forest City Electric Co., and other associated equipment, including cap and cone suspensions, wood strain insulators, Giant Strain Insulators, overhead frogs, crossings, bonding compressors and contactors. Each sheet had three staples on left hand side and two punch holes. There were removed for scanning and have not been replaced.trams, tramways, overhead, forest city signals, insulation, trackwork, trolley wire -
Bendigo Historical Society Inc.
Document - DRAWOING AND VERSE ALEC. BARR
... Drawing of a koala bear, wearing a cap, playing a side drum..., wearing a cap, playing a side drum. The verse reads; We are known ...Drawing of a koala bear, wearing a cap, playing a side drum. The verse reads; We are known as the 'Lions Cubs' - to some, and 'Boys of the Bull-dog breed,'' by gum! (These are credentials enough and to spare), But the symbol of symbols by which we swear, Which we maketh the foe cut and run to his lair, Is that of our mitey australian Bear. Signed Alec. Barrdrawing, pencil, mitey australian bear -
Bendigo Historical Society Inc.
Clothing - GERMAN HERITAGE SOCIETY COLLECTION: CAP - GENTLEMAN'S SMOKING CAP
Item 15. Black Gentleman's Smoking Cap with stitched green leaves and blue flowers around the top and sides. The top of the crown has a pale blue crocheted dome 3.7cm wide and 18mm high. From under the dome is a plaited crochet thread which ends in a long tassel. The inside is pale blue quilted stitching in a leaf pattern.bendigo, clubs, bendigo heritage, german heritage society collection - cap - gentleman's smoking cap -
Ballarat Tramway Museum
Uniform - SEC uniform Hat, Commonwealth Government Clothing Factories Melbourne, 1960s
All tramway platform crew were issued with a cap and were expected to wear it at all times. Demonstrates uniform cap manufacture.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic beak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 3/8".btm, ballarat tramway museum, conductors, conductors hat, uniforms, sec, conductors cap, motormen, drivers -
Bendigo Historical Society Inc.
Functional object - Cresalo vaporizing lamp
Cresalo Vaporizing Lamp. Sigma Co. Ltd. Manufacturing Chemists Melbourne. Instructions to side. Brown & White Cardboard Box. Glass bottle with metal cap and wick. Metal stand and pan. Aileen and John Ellison Collection.cresalo, lamp, vaporizing -
Ballarat Tramway Museum
Functional object - Tramcar door square key, State Electricity Commission of Victoria - Ballarat office, Mid 1930's?
Used by tram crews to secure doors in the open or closed position and to open the used ticket box. Part of the items issued to each traffic crew or maintenance staff to access or lock tramcars.Would have been issued at the time to a driver or conductor with the cap or traffic number of 18Piece of chrome plated steel rod bent at 90 degrees and shaped at longer end to give a square shape for use in external doors on SECV Ballarat Trams - known as a square key. Was used to secure doors in both open and closed positions. Has been stamped 18 on one side at short end.18ballarat, tramcars, equipment, crews, doors, tramways -
Kew Historical Society Inc
Photograph, Outer Circle Railway Bridge over River Yarra, c.1900
This photograph forms part of the Eric Sibly collection of images and information relating to the Outer Circle Railway which he donated to the Kew Historical Society in 1974. Heritage Victoria Citation (Abridged) "The Chandler Highway Bridge, a 137 metre wrought iron lattice-truss girder bridge with four spans supported on red brick piers with moulded bluestone cappings. The bridge has a cantilevered walkway along the west side. ...The Chandler Highway Bridge crosses the Yarra River and connects Alphington and Kew. It was completed in November 1890 as part of the Outer Circle Railway Line.Black & white photograph of the railway viaduct over Yarra River looking south towards Kew.Reverse: "Pre 1930. Outer Circle Railway Bridge over River Yarra (now Chandler Highway) - note bridge over line on Kew side for Asylum Farm". KH - 56. Kew Historical Society.chandler highway, railway bridges - kew (vic), sir john monash, outer circle railway, river yarra - kew (vic) -
Tennis Australia
Racquet, Circa 1965
A wooden racquet painted from throat to handle, with brown leather handle grip, and white plastic butt cap. Decal inscription across base of head on obverse: SLAZENGER. Below on throat is a decal image of the Slazenger 'Black Panther' trademark. Along the left side of the stem is inscription: DEMON. Materials: Wood, Paint, Leather, Ink, Adhesive tape, Nylon, Ribbon, Metal, Glue, Lacquer, Plastictennis -
Tennis Australia
Racquet, Circa 1972
A wooden racquet painted with a black and white design, from shoulders to handle, with black synthetic handle grip, and white plastic butt cap. Decal inscription across base of head on obverse: SLAZENGER. Below on throat is a decal image of the Slazenger 'Black Panther' trademark. Along the right side of the stem is inscription: DEMON. Materials: Wood, Paint, Adhesive tape, Nylon, Metal, Glue, Lacquer, Plastictennis -
Tennis Australia
Racquet, Circa 1968
A wooden racquet with a white butt cap, featuring Slazenger logo and emblem. Black panther emblem also features across the throat, on both sides. Inscription, from head to stem, on both sides: SLAZENGER/PERSONAL/... Materials: Wood, Nylon, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Plastictennis -
Tennis Australia
Racquet, Circa 1968
A red, white, black and gold-painted wooden racquet with a white butt cap, featuring Slazenger logo and emblem. A shield device with an 'S' in the centre, features across the throat, on both sides. Inscription, from head to stem, on both sides: STARFIRE/LAMINATED/CONSTRUCTION/SLAZENGER. Materials: Wood, Nylon, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Plastic, Paint, Adhesive tapetennis -
Tennis Australia
Racquet & cover, Circa 1972
A wooden racquet (.1), with Slazenger-brand handle grip, and black and silver butt cap, featuring Slazenger logo and black panther emblem. Emblem also features across throat and stem, on both sides. Inscription across the base of the head, on both sides: SLAZENGER. racquet is accompanied by a gold, black and white racquet head cover (.2). Materials: Wood, Nylon, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Plastic, Paint, Adhesive tape, Synthetic material, Metal, Bambootennis -
Tennis Australia
Racquet, Circa 1955
An Oliver International tennis racquet, with ribbon whipping around shoulders and shaft, leather handle grip with continuous X-formation perforations, and a rubber butt cap. Oliver logo featurs across crown, along shaft, and across butt cap. Model name features across base of head. Illustrated decal of stylised kangaroo features on throat. Reproduced signatures of Anderson and Sedgman feature on the sides of throat. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Ribbon, Fibreglass, Rubber, Enamel, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1955
An Oliver International tennis racquet, with ribbon whipping around shoulders and shaft, and leather handle grip with continuous patterned perforations. Oliver logo featurs across crown, along shaft, and across butt cap. Model name features across base of head. Illustrated decal of stylised kangaroo features on throat. Reproduced signatures of Anderson and Sedgman feature on the sides of throat. Materials: Wood, Gut, Leather, Ink, Glue, Lacquer, Metal, Ribbon, Fibreglass, Rubber, Enamel, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1973
A Snauwaert Autograph, International Club tennis racquet, with plastic ribbon whipping around shoulders. Snauwaert logo features across base of head. Model name features along shaft. 'S' trademark features on throat and butt cap. Design and manufacturing details feature on the sides of the shaft. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Plastic, Fibreglass, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1979
A Snauwaert Brian Gottfried tennis racquet, with plastic ribbon whipping around shoulders. Snauwaert logo features across base of head. Model name features along shaft. 'S' trademark features on throat and butt cap. Design and manufacturing details feature on the sides of the shaft. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Plastic, Fibreglass, Adhesive tapetennis -
Tennis Australia
Racquet, 1981
A Dunlop, John McEnroe Pro tennis racquet, with ribbon whipping around shoulders. Dunlop logo features across base of head. Model name features across throat and along shaft. 'D' trademark in arrowhead device also features on lower shaft and plastic butt cap. Dunlop logo and trademark feature on left and right sides of shaft. Retailer sticker features on left side of shaft. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Fibreglass, Ribbon, Adhesive tapetennis -
Tennis Australia
Racquet, 1981
A Dunlop "McEnroe tennis racquet, with oversize frame, and ribbon whipping around shoulders. Model name features across base of head. Dunlop logo and trademark feature on left and right sides of shaft, across throat and along shaft. 'D' trademark in arrowhead device also features on plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Ribbon, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1982
A Dunlop McEnroe Tournament Mid tennis racquet, with midsize frame, ribbon whipping around shoulders, and unbroken plastic seal around handle grip. Model name features across base of head. Dunlop logo and trademark feature on all four sides of shaft. 'D' trademark in arrowhead device also features on black plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Ribbon, Adhesive tape, Enameltennis -
Tennis Australia
Racquet, Circa 1982
A Dunlop McEnroe Junior tennis racquet, with wood-composite construction, and unbroken plastic seal around handle grip. Model name features across base of head, and right side of shaft. 'D' trademark in arrowhead device features on throat and black plastic butt cap. Dunlop logo and trademark features on left side of shaft. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Ribbon, Adhesive tape, Enameltennis -
Tennis Australia
Racquet, Circa 1983
A Dunlop McEnroe Junior tennis racquet, with midsize frame. Model name features across base of head. Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Ribbon, Adhesive tape, Enameltennis -
Tennis Australia
Racquet, Circa 1983
An unstrung Dunlop Maxply McEnroe tennis racquet, with fibreglass reinforced shoulders, and handle grip with unbroken plastic wrap. Model name features across base of head. Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. Materials: Wood, Plastic, Ink, Leather, Glue, Lacquer, Metal, Adhesive tape, Fibreglasstennis -
Tennis Australia
Racquet, Circa 1983
A Dunlop Maxply McEnroe tennis racquet, with fibreglass reinforced shoulders. Model name features across base of head. Dunlop logo and trademark feature on all four sides of shaft, and repeatedly across the handle grip. 'D' trademark in arrowhead device also features on black plastic butt cap. Materials: Wood, Plastic, Ink, Leather, Glue, Lacquer, Metal, Adhesive tape, Fibreglass, Nylontennis -
Tennis Australia
Racquet, Circa 1982
A Dunlop Elite tennis racquet, with ribbon whipping around shoulders and shaft, fibreglass reinforcing, and leather handle grip still sealed in plastic wrap. 'D' trademark in arrowhead device along with Dunlop logo features across base of head, sides of shaft, and repetitively across the handle grip. Model name features on throat, accompanied by ornamental swirl. 'D' trademark in arrowhead device also features on lower shaft and black plastic butt cap. Materials: Wood, Plastic, Ink, Leather, Glue, Lacquer, Metal, Adhesive tape, Fibreglass, Nylon, Ribbontennis -
Tennis Australia
Racquet, 1978
An AMF Head Vilas, wood/graphite composite tennis racquet, with open throat design. Head logo features across base of racquet head. Model name features along shaft. AMF Head emblem and logo feature on top of handle, above grip. AMF Head logo features on plastic sticker over black butt cap. Registration number written along left side of shaft: W-189430. Materials: Wood, Graphite, Leather, Plastic, Nylon, Glue, Lacquer, Metal, Ink, Adhesive tapetennis -
Tennis Australia
Racquet, 1978
An AMF Head Vilas, wood/graphite composite tennis racquet, with open throat design. Head logo features across base of racquet head. Model name features along shaft. AMF Head emblem and logo feature on top of handle, above grip. AMF Head logo features on plastic sticker over black butt cap. Registration number written along left side of shaft: W-58305. Materials: Wood, Graphite, Leather, Plastic, Nylon, Glue, Lacquer, Metal, Ink, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1971
A Spalding, "Pancho Gonzales" Impact-333 Model tennis racquet, featuring whipping around shoulders. Manufacturer's name along shaft and on butt cap; endorser name across base of head and rest of model name along lower shaft (both sides). 'S' symbol spray-painted across net. Perforated leather hand grip and white plastic butt cap. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Leather, Plastic, Stringtennis -
Tennis Australia
Racquet, Circa 1972
A Spalding, "Rosie Casals" Impact-336 Model tennis racquet, featuring whipping around shoulders. Manufacturer's name along shaft and on butt cap; endorser name across base of head and rest of model name along lower shaft (both sides). 'S' symbol spray-painted across net. Perforated leather hand grip and white plastic butt cap. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Leather, Plastictennis -
Tennis Australia
Racquet, Circa 1974
A Spalding, "Erik van Dillen" Impact-444 Model tennis racquet. Manufacturer's name along shaft and on butt cap; endorser name across base of head and rest of model name along lower shaft (both sides). 'S' symbol spray-painted across net. Perforated leather hand grip and white plastic butt cap. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Leather, Plastic, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1975
A Spalding, "World Championship Tennis " Impact-500 Model tennis racquet. Manufacturer's name along shaft and on butt cap; model name across base of head and WCT logo on lower shaft (both sides). 'S' symbol spray-painted across net. Perforated leather hand grip and white plastic butt cap. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Leather, Plastic, Stringtennis