From c1950s electrical irons were used. The thermostatic iron followed the electric iron used with a container that enabled water to be sprayed onto the cloth. Damp cloth was more easily pressed. This thermostatic electric iron was one of the early models.This iron was used by residents of the Kiewa Valley including those living at Mt Beauty where there was electricity and an SEC shop from c1950.This is a "General Electric" iron. It has a steel base with a chrome upper and black plastic handle. It is thermostatically controlled with water spray. The electric cord is permanently attached, at right angels, to the handle base. A red button activates the water spray when pushed. A white button slides to enable fabric selection. A metal hole in the front of the handle is used to fill the iron with water.General Electric; Wash and Wear / Wool / Cot / Lin; Australian General Electric Appliances Pty Ltd.; Notting Hill Victoria. 1100 Wats 240 Volts AC only. V/A2F Cat. No. 10 FS10iron;, electrical appliance, laundry, domestic, pressing clothes

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal instrument used for cervical sutures. Instrument consists of a handle and shaft. The end of the shaft is curved so as the tip of the instrument is almost perpendicular to the handle. The end of the shaft is in the shape of a loop to allow for sutures to be passed through it. The handle of the instrument is engraved with the word 'KLOSS'. The shaft of the needle is engraved with an image of the Rod of Asclepius, featuring a serpent wrapped around a staff, topped by a crown.'KLOSS' obstetrics

This large 10 gallon boiler would have been used over an open fire or placed on top of coals to boil clothes clean. They were first made in England during the 1700's and onwards.They were shipped to Australia and other British Empire countries to be purchased by early settlers. A large antique black oval cast iron Boiler Pot with small curved lifting handles for holding it on both sides. There is a large cast moveable carrying iron handle with a bend at the top for hooking onto an 'S' shaped hook or rod to hang over an open fire. This handle is attached on each side to thick iron loops. The Makers name is embossed on one side.Embossed on one side is 'Clarke and Co 10.GS' inside an oval shape (for gallons) There is a diamond shape too of a blacksmith at work. cast iron, cooking, boiling utensils

This upper portion of a brass plated spoon is from the wreck of the LOCH ARD, a Loch Line ship of 1,693 tons which sailed from Gravesend, London, on 2 March 1878 with 17 passengers and a crew of 36 under Captain George Gibbs. “The intention was to discharge cargo in Melbourne, before returning to London via the Horn with wool and wheat”. Instead, on 1 June 1878, after 90 days at sea, she struck the sandstone cliffs of Mutton Bird Island on the south west coast of Victoria, and sank with the loss of 52 lives and all her cargo. The manifest of the LOCH ARD listed an array of manufactured goods and bulk metals being exported to the Colony of Victoria, with a declared value of £53,700. (202 bills of lading show an actual invoice value of £68, 456, with insurance underwriting to £30,000 of all cargo). Included in the manifest is the item of “Tin hardware & cutlery £7,530”. This spoon handle is one of 482 similar items of electro-plated cutlery from the LOCH ARD site, comprising spoons and forks of various sizes but all sharing the same general shape or design and metallic composition. 49 of these pieces display a legible makers’ mark — the initials “W” and “P” placed within a raised diamond outline, which is in turn contained within a sunken crown shape — identifying the manufacturer as William Page & Co of Birmingham. An electroplater’s makers’ marks, unlike sterling silver hallmarks, are not consistent identifiers of quality or date and place of manufacture. A similar line of five impressions was usually made to impress the consumer with an implication of industry standards, but what each one actually signified was not regulated and so they varied according to the whim of the individual foundry. In this case, the maker’s marks are often obscured by sedimentary accretion or removed by corrosion after a century of submersion in the ocean. However sufficient detail has survived to indicate that these samples of electro-plated cutlery probably originated from the same consignment in the LOCH ARD’s cargo. The generally common range of marks are drawn from 255 tea spoons, 125 dessert spoons, and 99 table forks. These marks are clearly visible in 66 instances, while the same sequence of general outlines, or depression shapes, is discernible in another 166 examples. Suggested trade names for William Page & Co’s particular blend of brass plating are ‘roman silver’ or ‘silverite’. This copper alloy polishes to a lustrous gold when new, discolouring to a murky grey with greenish hue when neglected. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only seven in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register most valuable. The LOCH ARD shipwreck is of State significance – Victorian Heritage Register S 417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Spoon handle and bent part of stem. Some encrustation and Silver Oxide. Recovered from the Loch Ard wreck.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, electroplated cutlery, handle, spoon, loch ard shipwreck

These items are of a high quality and would have come from a household where the occupants had considerable means. It was not common to have silver plating on both of these items. Shaving brushes and strops were essential items for men shaving their faces regularly until the mid to late 20th century when electric shavers became more common. These two items are attractive ones and are retained because they represent a household item of the past and they are a rare example of a shaving strop enclosed within a case. They will be useful for display. .1 This is an extending razor strop made of brown leather. It has a heavily patterned silver handle attached to the leather by metal studs and it is contained within a cylindrical case of plated silver. The case has a heavily-patterned curved base and top and on one side there is an oval outlined space in which to put initials or an inscription. The case has a handle on one end to match the strop handle but this handle is for hanging the item on a hook to keep it upright and stable. This would then enable the user to pull hard on the other handle to use the strop to sharpen a razor .2 This is a shaving brush made of horsehair or other animal hair. It has a silver-plated handle with a double ridge in the middle. It was used to lather a person’s face or skin with cream or soap to lessen chafing during and after shaving. The silver on both items is a little tarnished. ‘British Made Ziff Sterilised’ ‘Falcon Silver Plate Co. Made in England 3533’ household items, history of warrnambool

These coils of heavy strong cargo rope are covered in hessian for protection from the elements and for ease of handling. They would have been imported for local use such as haulage, fencing and towing. These rope coils or bails are an example of products imported into Australia for local use.Rope; four large coils of thick rope in hessian covers.Some of the covers have remnants of paper labels and black markings.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, rope, rope coil, rope bail, cargo rope, hessian covered rope

In the 1950s and 60s, Ferguson's bone cutters were used by obstetricians to remove the foreskin during circumcisions. The scoring on the handles is to prevent the tool slipping in the user's grip when in use.Metal bone cutter, with hand grip scoring on outer arms. Similar in appearance to pliers, with short cutting blades.circumcision

Interior surfaces are abrasive, rather like coarse sandpaper. Turning the handle rotates the potatoes or other vegetables, causing them to rub against the surfaces and so losing their skin.'Pronto' potato or other vegetable, peeler. Burgundy enamel tin on the outside, grey abrasive interior surface.Pronto The "Pronto" Peeling Machinepotato peelers, food processing equipment

Button hooks were used to fastens buttons on boots and long gloves. It is a tool used for the closing of shoes, gloves or other apparel that uses buttons as fasteners. The steel hook end is inserted through the buttonhole to capture the button by the shank and draw it through the opening. This hook is most likely to have been used to do up bootsWomen and young girls generally wore boots that were either front laced or side buttoned, particularly in the period from the 1870s . Buttonhooks were needed to do up the buttons on buttoned boots and were used by poking the metal hook through the buttonhole, grabbing the button and pulling it through the eyelet. This item is an example of a commonly used accessory no longer relevant.A button hook made of metal with a beaten silver handle ornately decorated with scrolls and foliate design. At the top is a small ring on the handle end. This could have been for a lady to attach the item to her chatelaine at her belt, or on a necklace. clothing footwear gaiters boots button-hook

This tool is one of several tools which are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool is of interest as an example of a home-made vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small mallet with a wooden handle and a cylindrical-shaped piece of wood inserted into the handle to form a mallet head. The head section is reinforced with a piece of curved thin metal. The ends of the mallet head are very worn. This is a home-made tool. vintage tools, henry phillips, warrnambool, history of warrnambool

The item was purchased from Robinson & Moffatt department store at Post Office Place Melbourne between 1884 when the store opened. Between 1911 and 1934 Robinson & Moffatt appeared to have sold out along with other businesses to became part of the Myer Emporium. Robinson & Moffatt were an early upmarket department store for the wealthy with a branch in Perth that was opened in 1899. During their time in business Robinson & Moffatt appear to have imported goods from England and Europe. The hatbox appears to be a British pattern made for a beaver type top hat around late 19th or early 20th century. A personal item made for Robinson and Moffatt department store, imported from England and sold to a wealthy colonial gentleman sometime between the late 19th and early 20th century. The item was purchased from one of the earliest department stores in Melbourne, that later was incorporated into what has become an iconic Australian department store operating out of one of Melbourne's iconic building locations,the Myer emporium.Gents leather oval hat Box, with concave lid reinforcing strap and leather handle. Has metal locking device and key hole. Handle held to top with 2 studs. Velvet inside lid. Catch inside box."Made for Robertson & Moffatt Melbourne"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, hat box, gentleman's hat, gent's hat box, hatbox

This paint scraper was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Paint scraper, part of the W.R. Angus Collection. Metal blade, with wide straight, sharpened end. Wooden handle has squared end, two screws fastening blade. Blade and handle have holes made in them for hanging.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, paint scraper, tool, scraper, household tool

Knife, large serrated blade, handle broken off and two bits of wire have been brazed onto blade as makeshift handle. trademark on blade Hammer, knife and anvil, "Felix" made by Solengen Rosterei Stainless Germany" .flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A manually powered torch, made from die cast metal. The torch is powered by means of a lever action handle which is operated by squeezing with a spring return. It has a magnify in lens and the handle can be locked down when not in use.Japanses markings and Arabic Numerals. Possibly patent numbers 178061/188192/203357

Most likely collected and donated by Dr Frank Forster.Decapitating hook, Braun's with one detachable handle (to interchange with crochet?) . Stamped near handle, "Lusztig Jeno Budapest" and "1" Also stamped with Aesculapius symbol of serpent, dagger and crown, the Jetter & Scheerer Co, Tuttlinen, South Germany.obstetric delivery, destructive instrument, decapitating hook

HAND MADE MINERS PICK METAL HEAD - LONG HAMMER HEAD ON ONE END AND PICK HEAD ON THE OTHER END WOODEN HANDLE, THE HANDLE IS SPLIT, HELD TOGETHER WITH LEATHER AND WIRE LEATHER STRIP WOUND AROUND AND NAILED ONpick, miners pick, miners tool, gold

Purse belonged to Myrtle Grant, grandmother of the donorSmall silver metal purse with silver chain handle. Body of purse mesh with six metal beads at base. Chain handle attached to ring with which to hang onto belt or sash. - Marked as 'Silver Ch 2875 X46'L.W. Xmas 1914costume accessories, female

A Dayton badminton racquet, with steel frame and strings, wooden handle and lower shaft, soft leather handle grip, and black cloth butt cover. Materials: Metal, Paint, Plastic, Nylon, Leather, Ink, Cloth, Wood, Lacquertennis

A Prince 'Graphite Comp XB Mid Plus' tennis racquet, with Prince 'Technigrip' synthetic handle grip, and original handle grip retail wrap. Materials: Synthetic Gut, Graphite, Plastic, Adhesive tape, Ink, Synthetic materialtennis

From the 1860's - 1930's various companies called their enamelware products by their own unique names, e.g. graniteware and agateware. The enamel coating put an end to metallic tasting food and prevented rust from contaminating food. It did scratch and chip easily. This lidded can could have been used for storing dripping or other liquids for cooking.A small rusted and chipped lidded can or billy with a wire handle looped at the sides. It has a rolled blue trim around the rim of the can. The rolled lid has a small flattened handle in the middle and the lid fits well to the can.enamel, metal, domestic object, cans

From the 1860's - 1930's various companies called their enamelware products by their own unique names, e.g. graniteware and agateware. The enamel coating put an end to metallic tasting food and prevented rust from contaminating food. It did scratch and chip easily. This lidded can could have been used for storing dripping or other liquids for cooking.A rusted and chipped grey speckled lidded can or billy with a wire handle looped at the sides. It has a rolled black trim around the rim of the can. The rolled lid has a small handle in the middle and the lid fits well to the can.enamel, metal, domestic object, cans

This item is one of several tools believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a rectangular wood plane, possibly home made. The inserted wood handle may have once been the handle of a saw. A metal blade inserted at the top emerges at the base to form a planning mechanism and rests against a piece of wood.vintage tools, henry phillips

Alluvial deposits along with water were scooped into this pan and aggressively agitated to allow dense material, such as gold, sink to the bottom for easy extraction.Mining played an important role in the history of Beechworth, for the township was established in the mid-1850s after gold was discovered in the area. The success of goldmining lead to the growth and development of early Beechworth.A circular gold panning tin featuring sloped sides, a folded over rim, and handles.burke museum, beechworth, gold mining, alluvial mining

The first Orbost Brass Band was formed in 1889. Around 1908 the town band split and the Orbost Workers' Band was formed. Eventually the two bands merged in 1913 to reform as the Orbost Municipal Band under conductorship of Charles Spink. The Orbost Municipal Band continued on for many years but was disbanded and reformed many times. The last time it was reformed was in 1961. Today it no longer exists. Further info and Ref: In Times Gone By - Deborah HallThe various Orbost bands over the years played a major role in community activities providing entertainment and musical experiences for the many members.A rectangular shaped rubber stamp with a wooden handle. The stamp was used by the Orbost Municipal Band.O.M.B. in black on frontorbost-municipal-band seal stamp

Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item was used in Orbost in the livestock industry.This item is an example of a common implement used in rural industry in Orbost.A branding iron with the letter J on the end. It has a long handle with a ring grip at the top.branding-iron livestock-industry rural-industry

This trophy was won by Jim Trewin in 1953 at the annual regatta in January 1953. Cyclone was a power boat.this item is associated with an annual event which no longer takes place in the Orbost district.A silver coloured metal (tin?) cup with handles on both sides mounted on a Bakelite plinth.Marlo Cup 1953 Owner Driver 1953 Won by Cyclonetrophy marlo-cup trewin-james recreation

Brothers Davis and Lowell Chamberlain, along with their sister Izanna, established what became known as the Chamberlain Medicine Company in 1873. The Des Moines, Iowa-based company eventually stretched to Australia, Canada and South Africa. Chamberlains Colic and Diarrhea Remedy used alcohol, ether, and chloroform to soothe upset stomachs. The company also sold a cough remedy, liniment, pain relief balm and lotion. Chamberlain’s Colic, Cholera and Diarrhea Remedy was one of many thousands of patent medicines that made incredible, and often false, claims about their effectiveness, and became tremendously profitable. Eventually government regulations were put in place to prevent medicine manufacturers from making unfounded claims about their products.This item is an example of a typical "over the counter" patented medicine commonly used by families. It reflect the changes in public health, medical practice and research over the last century.Small green tinted medicine bottle. Writing on front. Cork is attached with wire handle.Front-Chamberlain's Colic & diarrhea Remedy Side- Sydney NSW Side Chamberlain's Ltd Bottom-1185bottle chamberlain's medicine remedies

A jack plane (or fore plane) is a general-purpose woodworking bench plane, used for dressing timber down to the correct size in preparation for truing and/or edge jointing. It is usually the first plane used on rough stock, but in exceptional cases can be preceded by the scrub plane. Jack planes are 300–460 mm long and 64–76 mm wide, with wooden-stocked planes sometimes being slightly wider. The blade is 44–57 mm wide that is often slightly convex (or ground with rounded corners) to prevent digging in to or marking the work. The cut is generally set deeper than on most other planes as the plane's purpose is to remove stock rather than to gain a good finish (smoothing planes are used for that). In preparing stock, the jack plane is used after the scrub plane and before the joiner plane and smoothing plane. The carpenters' name for the plane is related to the saying "jack of all trades" as jack planes can be made to perform some of the work of both smoothing and joiner planes, especially on smaller pieces of work. Its other name of the fore plane is more generally used by joiners and may come from the fact that it "is used before you come to work either with the Smooth Plane or with the Joiner". Early planes were all wood, except for the cutter, or combined a wood base with a metal blade holder and adjustment system on top. Although there were earlier all-metal planes, Leonard Bailey patented many all-metal planes and improvements in the late 19th century. A jack plane came to be referred to as a "No. 5" plane or a "Bailey pattern No. 5" at the end of the 19th century. A vintage tool made by an unknown company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could remove large amounts of timber. These jack or dressing planes came in various shapes and sizes to achieve a flat and even finish to timber surfaces before the use of smoothing planes and came in many sizes. A significant tool from the mid to late 19th century that is still in use today with early models sought after by collectors. It gives us a snapshot of how furniture and other finishes were created on timber by the use of cutting edged hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative or even finish that was needed for the finishing of timber items. Jack Plane handle is attached by large screw there is a round piece of wood tacked to front. noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jack plane