A Wilson Andrea Jaeger Victory tennis racquet. Base of head features Wilson logo. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-form perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, String, Plastictennis

A Wilson Stan Smith Capri tennis racquet. Base of head features Wilson logo. Throat features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis

A Wilson Stan Smith american tennis racquet. Base of head features Wilson logo. Throat features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis

A Wilson Jimmy Connors Capri tennis racquet. Base of head features Wilson logo. Throat features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastic, Inktennis

A Wilson Jimmy Connors Capri tennis racquet. Base of head features Wilson logo. Throat features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis

A Wilson Chris Evert Sentry tennis racquet. Base of head features Wilson logo. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-formation perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbon, Adhesive tapetennis

A Wilson Chris Evert Champion tennis racquet. Base of head features Wilson logo. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-formation perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbon, Adhesive tapetennis

A Wilson Chris Evert, Miss Chris tennis racquet. Base of head features Wilson logo. Throat features model name. Base of shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbon, Adhesive tapetennis

A Wilson Chris Evert, Miss Chris tennis racquet. Base of head features Wilson logo. Throat features model name. Base of shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbon, Adhesive tapetennis

A Wilson Chris Evert Champ racquet. Base of head features Wilson logo. Throat features model name. Base of shaft and butt cap feature 'W' trademark. Leather handle grip features X-formation perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbon, Adhesive tapetennis

An unstrung, Wilson Chris Evert Professional Champ racquet. Base of head features Wilson logo. Throat and shaft feature model name, with a stylised column device. Base of shaft and butt cap feature 'W' trademark. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbon, Ink, Adhesive tapetennis

A Wilson Lady Advantage tennis racquet. Wilson logo features across base of head. Calligraphic swirl device features on throat. Model name features along shaft. Raised brown 'W' trademark features on butt cap. Materials: Wood, Paint, Nylon, Leather, Adhesive tape, Ribbon, Plastic, Glue, Lacquer, Metal, Inktennis

A Wilson Lady Advantage tennis racquet. Wilson logo features across base of head. Calligraphic swirl device features on throat. Model name features along shaft. Raised brown 'W' trademark features on butt cap. Materials: Wood, Paint, Nylon, Leather, Adhesive tape, Ribbon, Plastic, Glue, Lacquer, Metal, Inktennis

A Wilson Sport tennis racquet. Wilson logo features across base of head. Model name, with gold and black 8-pointed star device, feature on throat, and, 'W' trademark features on lower shaft and butt cap. Materials: Wood, Paint, Nylon, Leather, Adhesive tape, Ribbon, Plastic, Glue, Lacquer, Metal, Inktennis

A Wilson Champ tennis racquet. Wilson logo features across base of head. Model name features across throat. 'W' trademark features on lower shaft and butt cap. Leather handle grip features floral perforations. Materials: Wood, Nylon, Leather, Adhesive tape, Ribbon, Plastic, Glue, Lacquer, Metal, Ink, Painttennis

A Winfield No. IS-04 metal tennis racquet, with double shaft, black plastic shaft casing; and handle wrapped in black perforated leather. Black plastic butt cap has adhesive label featuring manufacturer name. Name & model also appear on side of shaft. Materials: Metal, Adhesive tape, Plastic, Leather, Adhesive label, Nylontennis

Multi-part object of 6 identical racquets (parts are numbered from 2008.986.1 to 2008.986.6). Each racquet is: a Dunlop 'Maxply Austral' model with yellow net strings and handle wrapped in Dunlop-branded plastic packaging. Racquet in white paper factory bag. Materials: Wood, Plastic, Adhesive tape, Paint, Leather, String, Nylon, Papertennis

Viola Annie McVicars (1911–1990) was born in Korumburra on 29 April 1911. At the age of 21, she married William John Ayling (1909–1995). After their marriage in 1932, they moved to Kew, initially to 81 Tennyson Street, and later to 180 Pakington Street. A professional tailoress, Viola Ayling was also a talented amateur potter, creating her ceramics at her home in Pakington Street, where she had an internal studio and a handmade, wood-fired brick kiln in her backyard. Following her death in 1990, her studio pottery passed to her daughter, and following the daughter’s death, to her granddaughter. This piece of glazed earthenware is part of a collection of 15 functional and decorative ceramic items donated by Viola’s granddaughter to the collection in 2024.A handmade, abstract figurative sculpture, expertly potted and glazed. The style is representative of Australian ceramic design of the period, particularly that employed by Klytie Pate.Hand modelled ceramic sculpture of a Madonna and Child figural group. The abstract figures are fully covered in an olive green overglaze, apart from the base which is overglazed in cream. The base has an incised spiral beneath the glaze, which was used to decorate the hidden surfaces of a number of pieces, The base is signed with the artist's name around the edge.Signature to base: "V. Ayling"ceramics, pakington street -- kew (vic.), sculptures, abstract art, madonnas and child, viola annie mcvicars, viola annie ayling

Automated Computer Processing (ADP) was instrumental to the successful operation of the Royal Australian Survey Corps Mapping capability and production. This paper describes elements of the ADP with a comprehensive description of each. They Include, PDP 11/70 Memory, Map Stock Control System, Digital Terrain Elevation Data, Digital Terrain Model Package, ASMAPS, ASTIS, Reflectance Hill Shading, Aerial Triangulation and Terrain Analysis.Two page paper report about Automated Data Processing, unstapledHand annotated "Folio 74" in top right hand cornerroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

Colin Quin was a National Serviceman in the 1958 intake upon completion of National Service Colin Quin joined the Regular Army. Colin served with the 21st Construction Engineers the unit went to Wewak, Borneo. After Military Service Colin worked as a refrigeration mechanic and has the interesting hobby of making model aeorplanes from beer cans. Colin Quin is also a distant relative to Ned Kelly.This is the original story of Colin Quin.A detailed A4 paper discription of Colin Quin a National Serviceman in 1958 and commenced training in the 20 National Service Battalion. Colin Quinn and joined the Regular Army after completion of National Service.

This calculator is like a modern calculator style keypad with a traditional pinwheel calculator. In operation it is similar to other Facit machines. The design from the 1930s was produced without interruption with only slight modifications until the early 1970s.This one hasn't a serial number or Model Number so date is unknown but probably the 1940s - 1950s when the SEC were constructing the Kiewa Hydro Electric Scheme.Used by the SEC Office Staff when the SECV were constructing the Kiewa Hydro Electric SchemeBox shape with grey steel top and sides on a black base. Three thin strips of stainless steel embossed with numbers on the top and clear panels beside them. Front has 3 red and 10 black knobs with arrows on the red and numbers on the black. Sides have stainless steel pedals and winders. The machine is very heavy. See on-line "mechanical calculators.wordpress.com"'Facit' on the front.calculator, facit

This book was owned by the late Dr Elizabeth Kerr and was donated to the Museum by the executor of her estate, Margaret Cameron. It was produced by Coats Patons and contains knitting patterns for mens and womens garments. The skirt modelled on the front cover and on page 13 is acknowledged as being a 'Kenneth Pirrie Creation'. Kenneth Pirrie was an Australian fashion designer from the 1960s who appears to have worked in Melbourne and Sydney.Patons / KNITTING / BOOK No. 708 / Latest young fashion - long / stockings or socks with / sweater to match in / TOTEM or TYROL / Two-of-a-kind sweaters, / for him and you, in TOTEM, / ARIEL and MOHAIR / A sweater or shift in TOTEM: / a man's cardigan in JET / 2'3 / PATONS . BEEHIVEknitting handicrafts - history, coats patons (australia) limited, pirrie, mr kenneth - kenneth pirrie creations, knitting, handicrafts - history

Fourteen Miniature Models of Nurses from Primitive Era to 1980's. They were Dean Nancy Long's idea and she had them made. They were used for "Careers" information when visiting High Schools. In 1972 when the uniforms changed from traditional to more modern trend they created interest for prospective trainee nurses. Each has a frame and a name tag in Roman script Collection of fourteen miniature Dolls. These dolls were used as a teaching aid at the Northern District School of Nursing.Titles of Dollsnursing uniforms, educational equipment, careers

In the early 19th century, infant baptismal gowns worn by male and female infants began to be modelled on dresses worn by adult women. Gowns were typically made of fine white linen or cotton, and often trimmed with tucks, lace, whitework embroidery, and other handwork. The Kew Historical Society's collection includes over fifteen christening gowns dating from the 19th and 20th centuries.A mid-nineteenth century christening (baptismal) gown, constructed of sturdy white cotton featuring a long skirt, high neck and long sleeves. The gown is constructed by hand, and there is evidence of home-finished needlework, The bodice is loosely pleated with gathering at the high waist, A later cotton tie was attached at the centre waist and commercial lace added to the neckline and cuffs.christening gowns, ceremonial clothing, children's wear, baptismal clothing, victorian historical themes — 8.6 marking the phases of life

The buildings at Kooyong have undergone various re-modelling and redesign over the years. These plaques commemorate the dual activities taking place at the Kooyong Centre, as it strove to adapt to the increasing need for technological support and the changes in information, day centre and supports needed by the blind and vision impaired community. These plaques were located in the corridor between reception and the day centre, but were dismantled during renovations in 2018.This plaque commemorates the start of construction of Vision Australia Foundation's information and technology facilities and was unveiled by Mr D R Argus AO, Patron Vision Australia Foundation, Chairman, Centenary Appeal in recognition of all who made this development possible for the lasting benefit of people who are blind or have severe sight loss. 27 March 2000, Malcolm Daubney, President. John Cook, Chief Executive Officer. This plaque commemorates the official opening of Vision Australia Foundation's Kooyong Centre by John Landy, AC, MBIE, Governor of Victoria, 11 October 2001. Building Donors: Don Argus, AO - Appeal Chairman, Shirley Admans, Amcor Limited, Aspect Consulting Pty Ltd, Atalina Nomines Pty Ltd, Robert Bosch (Aust) Pty Ltd, The William Buckland Foundation, Cadbury Schweppes Australia Ltd, Terry Cocks OAM, Coles Myer Ltd, Commonwealth Bank of Australia, Consolidated Paper Industries, John & Beverley Cook, The Craftsman Press Pty Ltd, Norma Crook, CSR Limited, Malcolm & Beverley Daubney, Don Draffin, Sir Andrew & Lady Fairley Foundation, Ford Motor Co. of Australia Ltd, Fortis Australia Ltd, Gandel Charitable Trust, Harold Gration, Dept of Health & Community Services, Peter Isaacson Publications Pty Ltd, Kayarem Pty Ltd, Kooyong Auxiliary, Kooyong Fair Committee, Lady Joan Law-Smith, Elaine Leahy, Eve & Lewis Lustig, Henry Malycon, Ann Miller, John Moule AM, Dame Elisabeth Murdoch, AC DBE, Sidney Myer Fund, National Australia Bank, Pacific Dunlop Ltd, Raleigh Paper Co Pty Ltd, Lady Catherine Ramsay, Rothschild Australia Ltd, Shell Australia Ltd, Slade & Partners, Springfield Auxiliary, Ian Roach AO, Rotary Club of Albert Park, Rotary Club of Hawthorn, The Top Opp Volunteers, Sir Donald & Lady Trescowthick Foundation Ltd, Graham Upton, John Wall OAM, John Wicking AM, Ian & Beverley Wilson, Woodside Petroleum Ltd.vision australia foundation, nameplates

The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius computer was built in a period of rapid growth in computing technology. The first stored program computers appeared in the late 1940s and used individual designs with valve technology. By the mid-1950s valve technology was replaced by transistors and the first mass produced commercial computers became available. The Ferranti Sirius was announced in 1959 and offered a “small” academic computer. It was designed and built by the English company Ferranti Ltd and sold through a local office of the company in Melbourne. The Sirius was manufactured at the Ferranti Ltd.’s West Gorton, England factory from 1959 to 1963 and, in all, the company produced probably 22 installations although only 16 were actually recorded as sold; this included one at Ferranti’s Bureau in London and one at Ferranti’s Melbourne Bureau. Only 7 were exported and 4 of these 7 were located in Melbourne, Australia. All four were associated with computing at Monash University – the Sirius in the MMoCH collection was purchased by Monash University in 1962, a smaller Ferranti Sirius was used on the Caulfield campus (prior to amalgamation with Monash University) from 1963, the Ferranti company had its own Ferranti Sirius initially temporarily installed at Clayton campus in 1962 and then placed in their office in Queens Road, Melbourne. A fourth computer was purchased by ICIANZ (now Orica) in 1962 and was transferred to Clayton campus in 1967. Only two of these Melbourne examples have survived; one in the MMoCH collection and one at Museums Victoria. There is an example of the Ferranti Sirius in the Science Museum Group collection in the UK as well. The Ferranti Sirius in the MMoCH collection was the first computer purchased by Monash University and it was shipped to Australia to be installed by November 1962. The University had a similar model computer on loan from Ferranti Ltd during the first part of the year and it was returned to the office of the company in Queens Road, Melbourne once the University’s own machine was installed. The computer was placed on site at Clayton campus, Monash University. The computer operated from 1962 until 1972 when it was officially decommissioned. The Ferranti Sirius was sold to Mr Paul Stewart in late 1974 and removed from Monash University. Mr Stewart later donated the computer back to the University in 1988 and it was transferred to the collection of the Monash Museum of Computing History after 2001. The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius is of scientific (technological) significance as one of the early transistor digital computers that transitioned computing from first-generation valve computers to second generation commercial installations. This example of the Sirius is of historical significance in its role as a part of the Computer Centre, Clayton campus, Monash University which provided computing facilities in Melbourne in the early 1960s when there were few installations available for academic, administrative and commercial users. Staff and students were able to undertake investigative research and learn programming techniques. The Computer Centre encouraged the use of the computer across all disciplines and this provided the base to establish computer science as a subject offering and, later, a new department in the University. This growth in computer education eventually culminated in the establishment of the Faculty of Information Technology, Monash University. The Ferranti Sirius in the collection at Monash Museum of Computing History has a main unit with a CPU and memory combined with input/output equipment and one extra cabinet of memory. The Central Processing Unit is a floor-standing unit which contains the computer circuits, power supplies and has a decimal digit display panel and a normal clock. A moveable control panel is placed in front of the Unit (Currently set on a recreated desk/filing cabinet support in the display). The Sirius base unit uses acoustic delay line memory with 1000 word store. An additional 3000 word memory cabinet is set adjacent to the CPU and can be connected to increase the memory. The computer is supported by a range of input/output devices. There is a Ferranti Paper tape reader, located on desk in front of CPU. Red label on front “Ferranti tape reader. Type TR 5. Serial No. 477”. Adjacent to the CPU is a set of Simplified tape editing equipment in three pieces which includes a (1) Table unit with switches on front face. Metal tag on reverse reads “Creed & Co. Model No. S4060. Serial No. 1457. Original Customers Marking GRP7 V706”. The table has a numbered internal tag “Table Serial No. 198579. (2)Creed teletype set on table unit. Metal tag on reverse “Creed & Co. Model No. 75RPR K4M4. Serial No. 5897 Made in England”. (3)Creed paper tape reader set on table unit. This set of equipment could read paper tape and print it, or copy paper tape while allowing it to be edited, or allow a programmer or data preparation person to type and punch a new program or data. It has no electrical connection to the computer. Paper tapes were usually torn off and carried across to the computer. There is also another table unit with switches on front face and changeable setting switch on front right side which holds a Ferranti Westrex paper tape punch set. Label on reverse “Teletype Code BRPE11” This was the Computer’s only output device. BRPE-11 is a teletype model number.

Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope

A wooden racquet with a convex throat and tilt top. The handle is framed by red leather end and stem wraps. String whipping feature at both sides towards the base of the head. The outer frame of the racquet head is sealed with a green painted cloth strip, glued and nailed to it. At the base of the throat on the obverse is a nailed silver plaque, with an engraved inscription and monogram: 30, JUNE, 83/AGF/"YOU KNOW WHO". The plaque conceals the manufacturer's details, which, from what is still legible, is definitely George G. Bussey. The model type 'THE DIAMOND' and the number 13 features on the upper throat and stem on the obverse, respectively. To highlight the model name, the gutstringing is arranged in a rare, diamond pattern. Materials: Wood, Gut, String, Cloth, Leather, Metal, Glue, Lacquertennis

Two part object. (1) An AMF/Head (possibly 'Edge' model) tennis racquet, featuring: twin shaft, aluminium alloy frame; brown plastic bridge; nylon net strings; brwon leather handle grip; brown plastic shaft casing; and, black plastic butt cap. 'Triple Head' logo features on adhesive label on bridge. No model name visible. Etched into sides of both shaft pillars are owner's details: 'CATHERINE BONE/ 318 50 OAKS/265-1665'. (2) AMF/Head brand cover for racquet head and throat. White vinyl with brown, tan and chocolate branding across centre. Plastic zipper with metal pull tab. Materials: Metal, Plastic, Nylon, Adhesive tape, Leather, Adhesive label, Vinyltennis

Two part object. (1) A Wilson 'T3000' metal tennis racquet, with double shaft; metal shaft bridge;and red plastic shaft casing featuring 'W' logo. Model name printed on metal adhesive labels fitted to shaft bridge. Handle wrapped with brown leather. Net anchored to metal wire wrapped around head frame. Red plastic butt cap with partial white label featuring manufacturer's 'W' logo in red. (2) A white and red vinyl racquet head cover with zipper and printed with manufacturer and model names. Has adhesive sticker on each side. Both state: 'NEW/EVEN QUICKER/EVEN STRONGER/T3000'. Materials: Metal, Plastic, Adhesive tape, Nylon, Adhesive label, Leathertennis