This is a set of ten photographs of Lithographic Squadron’s Printing Building at the Army Survey Regiment, Fortuna, Bendigo, c1986. The building was originally George Lansell’s gold crushing battery. When the Army took possession of Fortuna in 1942, it was modified with reinforced concrete floors to house the heavy-duty printing equipment. An additional building was purpose built on the eastern side of the printing building in 1987 to house a new computer-controlled Heidelberg Speedmaster five colour lithographic offset Printing Press. See item 6131.18P for photos of foundation preparation for the new building. This is a set of ten photographs of Lithographic Squadron’s Printing Building at the Army Survey Regiment, Fortuna, Bendigo, c1986. Black and white photographs are on 35mm negative film and scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) to .10) - Photos, black & white, c1986. Lithographic Squadron’s Printing Building.There are no annotations with the photos. royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho sqn, litho

Part of the Kevin John Herdman No. 397661 Collection. See Catalogue No. 5942P for details of his service record.Two metal kit bag handles, one oval shaped and one U shaped. 1. Metal (silver plated cast) oval shaped handle with rectangular holes on each end for attachment to a bag. 2. Metal (silver plated cast) “U” shaped handle with rectangular holes on each end for attachment to a bag.kevin john herdman, kit bag handle, equipment

Items in a collection relating to Edward Judd, refer Cat No 7410 for his service details.1. Water bottle. This is a blue enamel 2 pint water bottle British pattern. It is covered in a drab olive felt cloth. It has a narrow raised neck with a cork stopper. 2. Carrier water bottle. This is a narrow leather strip of about 1/2" (12.5mm) width. At the end is a canvas webbing broad strap. Width 2" (or 50mm). The length of the leather piece is adjustable.On the metal end of the cork stopper, stamped, are “D^D” and the letters “OP”.ww2, equipment, bottle, water

Items in a collection relating to Edward Judd, refer Cat No 7410 for his service details.1. & 2. Pair of brown leather leggings with leather straps. The top section has two buckles and one strap. One legging is missing the long strap.horse riding equipment, leggings

Item in a collection relating to Edward Judd, refer Cat No 7410 for his service details.Small tan leather strap. Chrome iron/steel buckle. Function unknown but possibly from leather legging. There are two sets of sewing holes approx in middle. No thread present.horse equipment, saddlery

Items in a collection relating to Edward Judd, refer Cat No 7410 for his service details.1. The main body is a 'U' shaped section, with an extension going out further (4cms). At the end if that extension is a small spiked wheel that rotates. The spikes are approx 3mm long. Other accessories on the spur frame are two leather straps of width 1/2" (12.5 mm) and a pivoted buckle permanently on one side of the spur frame. 2. Same as No. 1 except the spikes are missing at the end of the spur and part of one strap is missing.horse equipment, saddlery, spurs

Item in the collection relating to Edward Judd, refer Cat No 7410 for his service details.1.& 2. Chrome plated, moulded iron stirrup. It has the arch over the top and twin base 'rails' for under foot. On top of arch is a slot of 3.5 cm wide, this is for the belt. Leather belt and buckle for the stirrup. The belt is 2.5 cm wide and 5mm thick. The buckle is chrome plated iron.horse equipment, saddlery, stirrups

Items in a collection relating to Edward Judd, Refer Cat No 7410 for his service details.This is a double sided water carrier (similar to a 'Mae West') It has a broad neck band of khaki webbing. it has two carriers made from khaki webbing. On the inside surface of the bags is a dark coloured canvas of finer weaving. The necks of the bags are of bakelite with a screw top also of bakelite. There is a 25 mm webbing that joins the front of the carrier L = total length 21 cms. There is a longer 25 mm webbing belt that joins the back portions. L = total length 64 cms. Written on the outside of neck section are numerals “78” Stamped inside is “C.G.C.F. 1963”.water carrying, equipment

Part of the equipment issued to service personnel for carrying equipment.Two compass pouches in army camouflage colours. Fold over lid with black button to seal. On back is canvas reinforcement with steel clips. When closing two separate studs on inside to allow for variation in size. Stamped on inside of cover part serial No. and other data. Small stud air hole at bottom.1. Written on inside lid "GRI 480" (possibly "O" is "6".) Stamped inside is serial No. "8465 - 66 - 125 - 3167" also "Trade partners ..Nov 2001". 2. On inside lid stamped Serial No. "8465-66-125-3167" and page 03-96.compass, camouflage, equipment

Items of equipment in DP camouflage issued to service personnel.Box shaped canvas pouch in DP Camouflage pattern, webbing reinforcement on three sides. Plastic clip lock on 4th side. Two stud air holes at bottom. Plastic belt clip on back to hook onto the uniform.Written in Texta "FRA 392".pouch, accessory, field equipment

Part of DP Camouflage equipment issued to service personnel for service in the field.One litre plastic water bottle, army green in colour with screw top lid attached to spout. Plastic is flexible and can be squashed. Covered with DP camouflage canvas pouch with reinforced webbing and adjustable carry strap. Metal clips on back webbing to attach to belt and plastic clip on front to close.Written in Texta "FRA 392" Stamped item No. "8465-66-135-2453" "TRADE PARTNERS" "Dec 2005".water bottle, field equipment

Part of equipment issued to service personnel in the field.Canvas DP Camouflage back pack. Black metal zip on top part of pack. Various webbing straps on the back of pack. Some of these straps are missing their clips and buckles.Written in Texta "FRA 392".back pack, field equipment

Items in the collection of SQD LEADER "SHANE WRIGHT". Enlisted RAAF 1982 Regiment number 0323963/ 8194842. Became radio technician on Electrical systems on Orion and F111. 1990 became Electrical Systems Specialist promoted to Sgt. 1996 Commissioned as an Officer. Postings: HQ Logistic Command. Aerospace Equipment Systems. OTS as Specialist Military Training Flight Command. 2005 Promoted Sqn Leader. Posted Executive Officer RAAF Williamtown. 2018 Discharged from RAAF.1. 2. 3. Service dress style, dark blue colour wool/polyester fabric. 1. Jacket - collar, four front patch pockets with button down flap. Buttons - gold colour plastic with shank and raised emblem - crown and wings - RAAF. On right pocket, metal RAAF Badge, above metal name badge. Above left pocket - service ribbons. Blue and yellow ribbon - long service with three rosettes, black, red, white ribbon - Defence medal. Sleeves - three rank stripes, black and blue ribbon. Lining - dark blue polyester fabric with concealed pocket. White colour cotton/polyester fabric. Manufacturers label inside left side. 2. Belt - fabric with gold colour plastic buckle with dark blue plastic buttons and strap belt keepers. 3. Trousers - waist band with belt loops, fob pocket, two side pocket and one inset back pocket. Nylon and metal zipper fly and metal closer. Lining - dark blue polyester fabric to waistband and pockets. White colour cotton/polyester fabric. Manufacturers label on back pocket lining.. 4. Shirt - light blue cotton/polyester fabric. Long sleeves, collar, shoulder epaulettes with fabric rank slides - 3 stripes, black and blue ribbon - Sqdn Leader. Top left sleeve - dark blue and white oval shoulder patch, embroidered - wings and "AIR FORCE". Clear plastic buttons. Manufacturers label - illegible. 5. Tie - dark blue colour necktie. polyester/wool. 6. Cap - peaked, Service dress Officer, dark blue colour fabric with black cloth band around exterior of cap. Black colour patent leather chinstrap secured by two gold RAAF buttons around the front half of the brim. RAAF badge on front, Queens Crown with red insert over gold coloured wings over laurel leaves. Interior - black sateen fabric with clear plastic lining. Brown leather look sweatband, White cotton manufacturers label.Manufacturers information - black ink print. 1. "A73/ADA/VICTORIA 2003/ NSN:/ NAME: / SERVICE NO:/ 70% WOOL, 30% POLYESTER/ LAUNDRY INSTRUCTIONS/ DRY CLEAN ONLY/ PRESS ON ORIGINAL CREASES/ USE DAMP CLOTH OR MEDIUM/ TO HOT STEAM IRON/ MADE IN AUSTRALIA" 3. "A72/ADA/ VICTORIA 2003/ NSN:/ NAME: SERVICE NO:/ 70% WOOL 30% POLYESTER/ DRY CLEAN ONLY/ MADE IN AUSTRALIA" 1. 3. Handwritten blue/black ink "S. WRIGHT/ 40594" 5. Black label white embroidered print "NOONE/ IMAGE WEAR/ MADE IN / AUSTRALIA/ 2002" 6. "MOUNT CASTLE PTY LTD/ BRISBANE 1999/ SIZE 59^". Handwritten black ink "S. WRIGHT"uniforms, raaf, service dress, shane wright

Form issued to service personnel to obtain clothing during WW2. Each person was allocated a set of coupons to obtain adequate clothing. Serving soldiers would require for uniforms.Small chit of paper form Rg.D4, called special clothing coupon issue. Yellow faded paper, signature of equipment officer on back.Issued to "A. Peterson". Official No. "'145478", dated 18 Nov 1943. Stamped "Equipment Officer", signed by "F/Lt - (?). Form No. 201216 - Chit representing 25 coupons.passchendaele barracks trust, uniforms, clothing coupon

This is a set of nine photographs of cartographic typesetting equipment and personnel in Cartographic Squadron at the Army Survey Regiment, Fortuna, Bendigo circa 1968 to 1979. The rooms on the top floor of Fortuna Villa where the photos were taken were formally the nursery and boys bedrooms during the Lansell family’s occupation of the building. The Fotosetter type setting machine replaced the letterpress method of type production in 1956. Its operator entered the text using a type order provided by cartographic draughtsmen/ draughtswomen. The type was output on a film positive, which was contacted onto strip film. The text was cut out by cartographic draughtsmen/ draughtswomen and affixed onto type sheets using bees wax. Cartographic Squadron’s CPL Arty Lane specialised in the operation of the Fotosetter type setting machine for many years, as shown in photos .3P and .4P. For more information on the Fotosetter, see page 71 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. The computer based Editwriter Model 7500 typesetting system was introduced in 1975 as a replacement to the aging Fotosetter. It was operated by a specialised technician, who generated a large variety of map type styles and sizes quickly and reliably, as well as text panels. Output on Copy proof adhesive backed stripping type film replaced messy wax and spray adhesives in 1978. The Editwriter capability supported all RASvy units and its contractor type setting requirements. SGT Jim McDonald operated the Editwriter for a couple of years in the late 1970’s. He is seen in photos .7P and .8P. reading off a type order and entering text into the computer. See item 6181.23P, photo .1P for a reduced scale photo of SGT Jim McDonald undertaking this task. Also see item 6123.12P photos .1P and .2P featuring CPL Paul Richards, who was another technician that operated the Editwriter for several years in the 1980s. The Editwriter was also operated by SSGT Pat Lumsden, as featured in photo .9P taken in 1979. The Monotype Photolettering Machine seen in photos .5P and .6P is understood to be in service for a shorter period, as it was not as productive compared to the Fotosetter and Editwriter. This is a set of nine photographs of cartographic typesetting equipment at the Army Survey Regiment, Fortuna, Bendigo, c1968 to c1979. Black and white photos are on photographic paper and scanned at 300 dpi. .1) - Photo, black & white, c1960s, Fotosetter type setting machine, unidentified technician. .2) - Photo, black & white, c1960s, Fotosetter type setting machine. .3) to .4) - Photo, black & white, c1968, Fotosetter type setting machine, CPL Arty Lane. .5) to .6) - Photo, black & white, c1970s, Monotype Photolettering Machine, unidentified technician. .7) to .8) - Photo, black & white, c1979, Typesetting machine, ‘Editwriter’ Model 7500, SGT Jim McDonald. .9) - Photo, black & white, 1979, Typesetting machine, ‘Editwriter’ Model 7500, SSGT Pat Lumsden.Personnel and equipment are identified in photos .1P to .3P. on a card. A description is provided: ‘Fotosetter: This model was used from 1956 to 1974. Where photograph was taken: Army Survey Regiment. Person in Photograph: Arty Lane. Approx date photograph taken: 1968. Any Misc Information: All type on maps was set on this machine. The operator of the machine (Ex SGT Lane) joined the Army in 1956 and was discharged in 1977. Also with Survey from 1942 to 1946. Information given by: Arty Lane’. Photo .9P is dated 1979 on the back.’royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, carto

This is a set of three photographs of an Open Day held at the AHQ Survey Regiment, Bendigo c1958. It’s evident in the background of these group photos there were displays of field surveying equipment. It is known an Open Day was held on the 2nd of November 1958. As the CO LTCOL Lindsay Lockwood MID is positively identified, it’s highly probable these photos were taken at that time. LTCOL Lindsay Lockwood was the CO of the AHQ Survey Regiment from 1951 to 1962. As the longest serving commanding officer of the unit, there was many changes implemented under his command. He decided an Open Day was the best way for the local community in Bendigo to gain an insight into the unit’s important role as Defence’s map production agency, its technical equipment, and its economic importance to Bendigo. It also gave them an opportunity to tour through historic Fortuna Villa. In the background of photo .1P above the man on the right is a sign with the following text: ‘STAR OBSERVING EQUIPMENT.’ LTCOL Lindsay Lockwood’s period as CO is covered in more detail in pages 48-49 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. Also refer to page 75 for more detailed information on the Open Day held in 1958. This is a set of photographs of an Open Day held at the AHQ Survey Regiment, Bendigo c1958. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black and white. Unidentified civilian visitors, 2nd from left: LTCOL Lindsay Lockwood MID. .2) - Photo, black and white. Unidentified Army Padre (centre) and civilian visitors. .3) - Photo, black and white. Unidentified civilian visitors..1P – annotated on back ‘COL LOCKWOOD’ .2P – no annotations .3P – annotated ‘Bishop Rich-e-a-‘royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

This is a set of eight photographs of technicians operating photogrammetric equipment in Air Survey Squadron, Army Survey Regiment, Fortuna, Bendigo. c1960s to c1980s. The Wild A9 Stereocomparator and Wild B9 stereo plotter were introduced in 1962. The Wild B8 stereo plotter was introduced in 1966. Technicians used the Wild A9 Stereocomparator to accurately measure between pass, tie, and survey control points on aerial photographs. The Wild B9 and B8s were used for plotting topographic detail and contours. These analogue machines were manually controlled by adjusting the control knobs for the orientation of the 3D image. The B9s used a four and a half square, and the B8s used a nine-inch square photo image on a film or glass diapositive which allowed highly accurate extraction of map features. At first, plotting with B8 and B9 stereo plotters was undertaken at the aerial photography scale of 1:80,000 in pencil onto a controlled plotting sheet. Sheets were then inked up and reduced photographically to the 1: 100,000 publication scale for scribe impression production. In the early days topographic detail and contours were plotted with a pencil or ink pen mounted at the far end of the pantograph arm. The plotting procedure was upgraded to direct plotting in ink with photographic reduction to publication scale. In 1975 four B8s were upgraded with tri-axis locaters as part of the Input Sub-system to enable digital extraction to AUTOMAP 1’s topographic database. When AUTOMAP 2 was introduced in 1982 these B8s were upgraded, and additional machines added to expand the Army Survey Regiment’s digital capture capability. This is a set of eight photographs of technicians operating photogrammetric equipment in Air Survey Squadron, Army Survey Regiment, Fortuna, Bendigo. c1960s to c1980s. Black and white and colour photos are on photographic paper and scanned at 300 dpi. .1) - Photo, black & white, c1965. Unidentified technician operating a Wild A9 Stereocomparator. .2) - Photo, black & white, c1965. Unidentified technician operating a Wild B9 stereo plotter. .3) - Photo, black & white, c1967. L to R: Unidentified technician, SPR Ken Jeffery operating a Wild B9 stereo plotter. .4) - Photo, colour, c1974. Unidentified technician, operating a Wild B8 stereo plotter. .5) - Photo, black & white, c1974. Unidentified technician operating a Wild B8 stereo plotter. .6) to .7) - Photo, black & white, c1979. Unidentified technicians operating a Wild B8 stereo plotter. .8) - Photo, black & white, c1985. Unidentified technician in AUTOMAP 2 operating a Wild B8 stereo plotter..1P, .2P, .4P, .5P, .7P – no annotations. .3P – annotated ‘Standing - , Seated SPR Ken Jefferies (sic). .6P – annotated with date ‘1979’ .8P – annotated ‘AUTOMAP 2’royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, air survey, photogrammetry

This is a set of six photographs of stereoscopic equipment and personnel at the Army Survey Regiment, Fortuna, Bendigo, c1950s to c1960s. The stereoscopes shown in photos .1P and .2P were used to stereoscopically view and interpret features in overlapping aerial photographs. The stereoscopic plotters shown in photos .3P and .4P were used to stereoscopically plot topographic detail from overlapping aerial photographs using a pantograph arm with pencil onto a controlled plotting sheet. The Ryker Model PL-3 Wernstedt-Mahan type stereoscopic plotter shown in photos .5P and .6P was used for precision contouring, planimetry and profiling. It was a comparatively simple stereoscopic mapping instrument designed to use ordinary contact prints of aerial photographs. It provides for plotting on a constant scale and approximate tilt correction but does not provide refinements such as correction for lens distortion. The plotter in Photo .6P does not have its pantograph arm attached. These plotters pre-date the Wild B9 and B8 stereo plotters introduced in the 1960s.This is a set of six photographs of stereoscopic equipment and personnel at the Army Survey Regiment, Fortuna, Bendigo, c1950s to c1960s. Black and white photos are on photographic paper and were scanned at 300 dpi. .1) - Photo, black & white, c1950s to c1960s, Universal Stereoscope, unidentified technician. .2) - Photo, black & white, c1950s to c1960s, Old Delft Scanning Stereoscopes, unidentified technicians. .3) - Photo, black & white, c1950s to c1960s, Unidentified stereoscopic plotters and technicians. .4) - Photo, black & white, c1950s to c1960s, Unidentified stereoscopic plotter, CPL Bill Shapcott. .5) and .6) - Photo, black & white, c1950s to c1960s, Ryker Model PL-3 stereoscopic plotter.Photo .4P is annotated on back - ‘Bill Shapcott (CPL)’royal australian survey corps, army svy regt, rasvy, army survey regiment, fortuna, asr, air survey, photogrammetry

See Patterson Cat 5825This is a green nylon rectangular 'bag'. One side is open and can be button shut using metal press studs. Inside around the hems are 30mm loops of a nylon strap.vietnam war, equipment

1. String pull through - it is made of a 3 part cord. One cord has a metal tube, the other end has a loop. 35cm from the loop end is another loop (it still retains a bit of oily cleaning cloth when last used.) One of the three cords has snapped. 2. Same sort of pull through as above. - still rolled up tightly. 3. Wire bristle brush for barrel cleaning. It has a brass end for screwing to a rod. The bristles are two diameters. A lot of fluff is caught up in the small bristles.rifle cleaning equipment, vietnam war

This collection of 14 photos were taken at Lithographic Squadron, Army Survey Regiment, Fortuna, Bendigo probably in the 1960s and 1970s. The main tasks undertaken by technicians in Photo Troop were most likely enlargements, reductions and duplication of map reproduction material, and processing of aerial photography. The equipment operated by the technicians is the KLIMCH camera. The main tasks undertaken by the technicians were most likely enlargements and reductions of map reproduction material. The KLIMSCH Commodore camera was introduced in 1953 and was the largest in the Southern Hemisphere. It was replaced with a new model of the same size in 1979. The new model with its computer-based interface provided productivity gains with improved speed and its consistent results led to less wastage in time and materials. See items 6057.8P, 6056.11P and 6058.8P for more information and photos on Photo Troop equipment and personnel. There is more information on the KLIMSCH Commodore camera, on pages 70 and 120 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. This collection of 14 photos were taken in Photo Troop, Lithographic Squadron, Army Survey Regiment, Fortuna, Bendigo probably in the 1960s and 1970s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, 1960s, KLIMSCH Commodore camera, unidentified technicians. .2) - Photo, black & white, 1960s, KLIMSCH Commodore camera, unidentified technician. .3) - Photo, black & white, 1960s, KLIMSCH Commodore camera. .4) - Photo, black & white, 1960s, KLIMSCH Commodore camera, unidentified technician. .5) - Photo, black & white, 1960s, KLIMSCH Commodore camera. .6) - Photo, black & white, 1960s, KLIMSCH Commodore camera, unidentified technicians. .7) - Photo, colour, 1970s, KLIMSCH Commodore camera, unidentified technicians. .8) - Photo, black & white, 1970s, WILD U4A Diapositive Camera, SPR Garry Hudson. .9) - Photo, black & white, 1970s, Photographic camera enlarger, SPR Garry Hudson. .10) - Photo, black & white, 1970s, Photographic camera enlarger, Phil Beaty. .11) - Photo, black & white, 1979, Film developer, SGT Garren Hill. .12) - Photo, black & white, 1970s, Film contact frame. .13) - Photo, black & white, 1970s, LogEtronics Contact Printer. .14) - Photo, black & white, 1970s, Tri-stud registered map separations with composite black negative on top.No personnel are identified. .11P annotated ‘1979’. .13P and .14P annotated ‘orthophoto’royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

Ear plugs supplied to service personnel for protection from noise.Small tin container, green exterior and gold inside. Writing in black. Contains 2 brown leather ear plugs in a small white box with red writing. Also contains a tube of antiseptic ointment wrapped in paper.On front labelled "Protectors Ear Drum" and "(Aust) MKI M". Inside lid detailed instructions for use and care in words and pictures. Scratched into back No. "94397".passchendaele barracks trust, equipment, ear plugs

This is undated. They are still using .303 rifle: Dated 1970- 1962 original.This is a two sided copy of an original 38 Bn camp document. This copy is a yellow colour with black ink. This copy shows layout of tent, equipment and webbing. the drawing shows 8 men to a tent. Of interest is that item one a paillasse. The original had a light red stain in centre. On the daily routine page they were allowing two "Smoke -O" for ten minutes, morning and afternoon.passchendaele barracks trust, camp instructions, 38th battalion

Equipment issued to operational staff to be used during active operations as a vessel for food and drink.Metal tin. two parts with handle. Silver in colour. Tin in two parts with base and lid. Half moon in shape. lid also can be used as a bowl. It has afold out handle to be used as a plate.passchendaele barracks trust, ration tin

Bandolier - Leather, Brown with nine ammunition pouches.passchendaele barracks trust, bandolier

1. Container - leather, brown, straps, metal clip. 2. Drink flask - glass, clear, metal top,passchendaele barracks trust, drink flask

Canteen - Felt covered, khaki, leather straps, metal buckle and rivets, Cork top adhered to canteen by twine.passchendaele barracks trust, water canteen

1. Legging - Leather, brown, straps, metal buckles and rivets. 2. Legging - Leather, brown, straps, metal buckles and rivets.passchendaele barracks trust, pair leggings

1. Scabbard - leather, brown, metal studs and buckles. 2. Scabbard - leather, brown, metal studs and buckles.passchendaele barracks trust, leather scabbards

This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The JGEM vehicle was extensively used by RA Svy within Australia from the late 1960s. A limited number of Ground Elevation Meter (GEM) station wagon type vehicles were manufactured by General Motors Corporation (GMC) in the USA for the United States Geological Survey, Canada’s mapping agencies, RA Svy and National Mapping (Natmap). The GEM was a four-wheel drive, four-wheel steer vehicle. Four-wheel steering was necessary to avoid systematic errors caused by non-tracking of front and rear wheels on conventionally steered vehicles. The manufacturer substituted the rear axle with a front axle and connected them to form the four-wheel steering mechanism. The two Australian GEM vehicles, referred to as Johnson GEMs (JGEMs) were converted into right-hand drive. After delivery in 1964, acceptance Natmap and RA Svy testing and operator training was undertaken at the Army's School of Military Survey located at Balcombe, Victoria. A small fifth wheel was mounted on a cantilever arm suspension midway between the front and rear wheels on the right side of the vehicle. It was lowered to and raised from its operating position by use of a constant pressure air cylinder. A telescopic bar, suspended between the front and rear axles, provided the reference datum for the angle measurement. The wheel provided the velocity or distance signal through a pulse generator system. A sensitive pendulum mounted on this bar provided the angle measurement for each minute distance traversed. The JGEM contained electromechanical instruments used to determine relative elevations, by trigonometric principles, along a traversed path. These relative elevations were obtained through apparatus which measures the instantaneous angle of inclination of the road and the instantaneous velocity of the meter along such a path. Road routes over which the JGEM operated were planned so that each started and ended as near as practicable to an existing point of known elevation (formally referred to as a level traverse bench mark). The difference in height from the bench mark and the road surface alongside the JGEM’s fifth wheel was measured with a level and staff. Along each route, mapping control photo reference points where new elevation values were required were identified on aerial photographs. Under favourable conditions it was possible to survey as much as 160km in an ordinary working day. The first of RA Svy’s JGEM operations was undertaken in 1:250,000 scale map areas of Queensland. CPL John Hook was the JGEM’s main operator in the early 1970s undertaking operations covering 1:250,000 scale map blocks over northern Victoria and central NSW, each requiring 36 points (9 runs of photography and 4 points across. SPR Lyn Thompson and SPR Bob McDonagh teamed with CPL Hook on some of these JGEM operations. When RA Svy was integrated into the Royal Australian Engineers in 1996, the JGEM vehicle with the Survey Corps collection was donated to its museum. It is believed to be the last of the original manufactured fleet in existence. The JGEM has undergone extensive refurbishment to achieve roadworthiness and is currently housed at The Australian Army Museum of Military Engineering, Hoslworthy Barracks, NSW. It can be viewed by making an appointment with the museum’s curator.This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The photographs were on 35mm slide film and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1960s, Johnson Ground Elevation Meter (JGEM) Survey Vehicle .2) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .3) - Photo, colour, c1960s, JGEM instrumentation. .4) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .5) - Photo, colour, c1960s, JGEM tyre pressure controller .6) - Photo, colour, c1960s, JGEM rear doors, SGT Geoff Briggs. .7) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position, SGT Geoff Briggs. .8) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position. .9) & .10) - Photo, colour, c1960s, JGEM tyre pressure system, SGT Geoff Briggs. .11) - Photo, colour, c1960s, JGEM tyre pressure system. SGT Geoff Briggs. .12) - Photo, colour, c1960s, JGEM levelling scope, levelling staff, unidentified technicians. .13) & .14) - Photo, colour, c1960s, JGEM levelling scope, unidentified technician. .15) & .16) - Photo, colour, c1960s, probably survey operation adjusted height plotted on block base sheet. .1P to .16P - Some of the equipment is annotated on the frame of the 35mm slides.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying