Narrow gauge private railwayDigital TIFF file Scan of 35mm Ilford FP3 black and white transparencyfyansford cement works railway, geelong, george coop collection, hudswell clarke 0-4-2stoc locomotive

Toothing plane, blade is missing, J. Heath stamped on the end, adjustable depth gauge on one end, 165mm long, 65mm high, 70mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Marking Gauge, wooden Staff, Black and Wedge. Stamped W.Burden on both ends of the Block. L 24.5cm x W 7cm x H 4.5cm.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marking gauge, w.burden

Black and white photographs of the rail fastening mechanism or method at a tram depot pit rail, such as East Preston depot. Shows the method of fixing and adjusting the rail gauge.trams, tramways, trackwork, depots, inspection

Timber poles with gauges to measure river height.Black and white photo of a bush setting with a tall timber pole which has been cleared around.water

Timber poles with gauges to measure river height.Black and white photo of two timber poles with measurements attached. Bush setting beside a water body.water

NKS Type Gangers Trolly - Victorian Railways 2'6" gauge trolly - a KS series Section Car oftern called the Kasey Jones The narrow gauge version of the broad gauge KS series cars. They were classed NKS with two stroke motors. These cars were built by the Spotswood Workshops, with castings coming from the Newport Workshops. KS is lighter car capable of carrying 4 men or sevenhundredweight Historic - Victorian Railways Narrow Gauge - Track Patrol Vehicle used by Puffing Billy Preservation SocietyMotorised small rectangular trolly made of wood and wrought iron Engine Type: 1 Cyl. reversible Fuel: 2 stroke Transmission: Belt driveNKS 8puffing billy, victorian railways, trolley, narrow gauge, 2'6" gauge, kasey, trolly

NKS 5 - NKS Type Gangers Trolly - Victorian Railways 2'6" gauge trolly - a KS series Section Car often called the Kasey Jones The narrow gauge version of the broad gauge KS series cars. They were classed NKS with two stroke motors. These cars were built by the Spotswood Workshops, with castings coming from the Newport Workshops. KS is lighter car capable of carrying 4 men or sevenhundredweight Historic - Victorian Railways Narrow Gauge - Track Patrol Vehicle used by Puffing Billy Preservation SocietyMotorised small rectangular trolly made of wood and wrought iron Engine Type: 1 Cyl. reversible Fuel: 2 stroke Transmission: Belt driveNKS 5trolley, nks5, puffing billy, victorian railways, narrow gauge, 2'6" gauge, trolly

End opening Wagon Gauge: 17 inch (430mm)Historic - industrial Narrow gauge RailwayEnd Opening Wagon - Made from wood and steel with one end that openspuffing billy, four wheel wagon

Bourdon pressure gauge. Lbs per ounce. No. 13057.

Portable blood pressure machine with case. Device consists of an arm cuff with a tube, rubber pressure bulb and gauge. The arm cuff is made of a khaki green material, with attached velcro and an attached label that reads 'KATCH/KUFF'. Tubing and pressure bulb are made of green rubber. The pressure gauge indicates that this device is made in Germany. Case is made of black leather and the inside of thh case is reinforced with cream plastic.

Yields information about the nature of the trams that came from Sydney to Ballarat for the first electric tramcars and has a strong association with the person who prepared by the plan.Blueprint plan of NSW Govt. Tramway cars 1,2,3,- Roof plan, front and side elevation - with side running trolley poles - 3/8"=1' scale with O gauge 1/4 and O gauge 3/8" scale marked. (These cars become part of the 1905 ESCo Ballarat Fleet). Imaged by scanning in two halves and joining together - could do some further work.trams, tramways, nswgt, plans, tramcars, esco

Marking Gauge, wooden with movable "Block" secured by a wedge to lock it on the "Staff", has initials "M.K" stamped on it. L 26.6cm x W 7.5cm x D 6cm.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Green coloured training module. Paint peeling off & rusty frame. Seat at the top with a long barrel coming out from the top & numerous brass knots & gauges.centurion tank, training module

Sovereigns are no longer used as currency in Australia. Brass balance for weighing one soveriegn and half sovereigns. Contained in a small orange coloured cardboard box which opens in half.A 'crown' etched on the left of the fulcrum and 'sovereign' and 'warranted' etched in the first circle and 'sovereign' '1/2' ( half) on the second circle. Box has writing " Improved sovereign balance\To weigh and gauge soveriegns and half sovereigns\Being so exact that no conterfeit can possibly go through the gauge\of sufficient weight to turn the balance."sovereign, sovereigns, half sovereigns, george w rusden

Pittock collection : various drill bit drill bits * 18 standard brace and bit drill bits of various gauges 180-95mm length * 2 odd drill bits ( one timber 21mm gauge hole 100mm length & one odd handmade "spade"bit 120mm length) * 4 threaded drill bits 75mm length Items stored in Pittock coach builders box, reference 13000.

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Driver George Lynch and Fireman David Brown at the controls of Locomotive R707. This parallel run took place between Wodonga and Wangaratta on 24 November 1973 with 3820 on the standard gauge and R707 double-headed with R761 on broad gauge. This occasion marked the Centenary of the opening of the North Eastern railway from Melbourne to Wodonga. Locomotive 3820 was a NSW Railways locomotive and is now a key exhibit at the Trainworks Museum, Thirlmere, NSW In circle on front of the locomotive on left "NORTH EAST CENTENARY/ WODONGA/ 1873-1973" On front of locomotive on left "R797. On front of locomotive on right "3820"railways wodonga, fred rochow, wodonga centenary locomotive, locomotive r707, locomotive 3820, north east line centenary

This instrument was one of the type used for training night navigation at the Nhill Air SchoolBlack metal instrument with pivot points and white markings to 360 degrees. Telescope sighting piece and bubble level gauges and screw adjusters. Includes separate sight original fitting.AM Astro Compass Mk.II, REF 6A/1174, 4C astro compass, compass, instrument, navigation, cramer

This instrument is the type used in the Nhill Air School navigation trainingBlack metal instrument with pivot points and white markings to 360 degrees. Telescope sighting piece and bubble level gauges and screw adjusters. Includes separate sight original fitting.AM, Astro Compass Mk.Ii, 6A/1174O, 4Pastro compass, navigation, instrument

From the collection of Betty McPheeBlack bakelite pen of two parts, barrel and lid. Barrel has gold nib attached and clear ink gauge. Lid has metal clip and two metal bandsdomestic items, writing equipment

Negative (120) and contact print of VR tram No. 7 at the Elwood depot. See also Reg Item 3624 for other photos showing the tram. Side on photo, showing the strengthening steel work applied to this four wheel tram. Has two Robur Tea advertisements. Tram possibly preparing for a tour given the number of men standing on the side. Hi Res image filed in the dbtext/hawthtramcoll/Large Images/htd3623Large.jpgEnvelope containing negative and photo typed "Tram VR Elwood Spread the load." On the rear of the print "VR Tram - Elwood Depot 5'3" gauge".trams, tramways, victorian railways, vr, elwood depot, tram 7

Report or Technical document - 2 A4 sheets, titled "Motor bogies for low-floor tramcars - SF30-TF and SF3-MTF", bogies for the Siemens Combino trams. Has illustrations and technical details of the bogies. Dated at the base of the 2nd page 3/97. Details both standard gauge and metre gauge bogies. On the rear of the first sheet are printout of emails regarding corrections to the text of books by Randal Wilson and Dale Budd. (Not scanned)trams, tramways, bogies, siemens, combino