The District nurses are leaving from their Melbourne District Nursing Society (MDNS) Nurses Home, which was situated at 39 Victoria Parade, Collingwood. Their MDNS uniform dresses and coats depicted are grey, and a red Maltese cross is attached to the centre of the headband on their grey brimmed hats. The Sisters will visit MDNS patients and provide nursing care to them in their homes.From its founding in 1885 until 1891 the Trained nurses (Nurses) of the Melbourne District Nursing Society (MDNS) worked from their own homes which were located in the vicinity of their areas (districts). In November 1891 MDNS was able to rent a two story terraced house at 66 Cardigan Street, Carlton, at £65 a year, which contained accommodation for three Nurses and one pupil nurse as well as being used as their Headquarters. They left from their Nurses Home each morning and returned at the end of their shift to write up their book work before retiring for the day. Three years later they moved into a larger terraced house at 49 Drummond Street Carlton which was rented at ‘a very moderate rental’. There was a Board room, apartments for the Nurses and pupil nurse, a large dispensary which patients could attend each evening to have prescriptions signed and bottles refilled with ‘homely remedies’ and elixirs, which were administered for e.g. to Consumptive cases. Doctor’s prescriptions were filled at the Pharmacy. Cupboards containing donated blankets and bedclothes for needy patients were kept in this room, and it was here where the Nurses kept their equipment and nursing bags which were refilled at the end of each shift ready for any emergency, and for the next day. A list of Doctors the Nurses could call was kept by the telephone. The home also had a kitchen where nourishing soup was made and distributed twice a week to the needy. Milk was also distributed when needed. In 1902 they moved into rented premises at 188 Leicester Street, Carlton and two years later, in 1904, to premises at 5 Royal Terrace, Nicholson Street, Fitzroy. They remained there for ten years and an Auction of furniture was held before their next move giving an idea of some of the contents: - Carpets, linoleum, walnut and oak sideboards, dining tables, walnut dining suite, Vienna chairs, walnut bedroom suite, cedar wardrobes, chests of drawers, duchess chests, bedsteads and bedding and general furnishings were for sale. In June 1914 at last the Society had sufficient funding to purchase their own terraced premises, ‘Floraston’ 39 Victoria Parade, Collingwood which was their Headquarters and Nurses Home. In 1926 the After-Care Home for recovering patients, (later called After-Care Hospital) was built by the Society next door, at 45 Victoria Parade; the District nurses continued to live at No. 39. In November 1953 the District Nursing Division moved into their new Headquarters and Nurses Home at 452 St. Kilda Road, Melbourne. In 1957 the two divisions legally separated and the District division became the Melbourne District Nursing Service. As District expanded, and now with outlying districts to service, and with a fleet of District cars, their trained nurses (Sisters) lived in their own homes and visited their closest District Centre each morning to collect their work for the day, and returned at the end of their shift to do their administrative work. A small black and white photograph showing a side on view of Matron Lydia Shaw who is smiling. She is standing outside the Nurses Home of the Melbourne District Nursing Society (MDNS), and is wearing a white long sleeved belted uniform dress, white stockings, shoes, and a veil over her short dark hair.. She is standing to the left, outside the front gate of the building watching a group of district nurses about to leave the Home. The group are on a path behind the four trained nurses (Sisters) most visible who are dressed in grey belted long sleeved coats which have lapels. They are wearing grey brimmed hats with a Maltese cross in the centre, flesh coloured stockings and black shoes. The first two Sisters are side by side and have just stepped onto the pavement; the one to the right is smiling and slightly turned toward Matron Shaw. Under their coats, both these Sisters are wearing grey scarves around their necks. There is a square concrete column behind Matron Shaw, and another to the right of the nurses. From the right column three metal vertical fence bars are seen with shrubs behind them. Part of a building and doorway can be seen behind the nurses. A brick wall and path is seen on the far left of the photograph.The date 1934 as well as the name of Matron Shaw, Sister Jones and Sister Tupper were hand written on the back of the photographnurses, matron, uniform, melbourne district nursing society, mdns, nurses home, rdns, royal district nursing service, matron lydia shaw, sister dorothy tupper, sister jones

Khaki fur felt slouch hat fitted with a puggaree in a light green with a metal Royal Australian Engineers corps badge attached to the front, the rising sun badge attached on the left and a colour patch on the right. Front - Engraved on the Corps Badge: ER/ HONI . SOIT . QUI . MAL .Y . PENSE / ROYAL AUSTRALIAN ENGINEERS /. Left Side - Engraved on The Rising Sun Badge: THE ARMY AUSTRALIAN /. Right Side - Colour Patch Interior - Leather Lining - 1984 / 54 / MADE BY / "FAYREFIELD" / MELBOURNE Lining - HOWEhat, officer, fur-felt, peace keeping

This United Nations beret was worn by Major Damien Batty with Australian Forces whilst on tour in Somalia.United Nations wool blue beret with a metal United Nations badge pinned to the front. The band of the beret is made from a black coloured synthetic material. The lining of the beret is black cotton material with a plastic maker's stamp attached to the crown. Interior - Maker's Stamp: HILLS / PURE WOOL . MADE IN NEW ZEALAND / UNITED NATIONS PROPERTY / 1united nations, wool, peace keeping

Australian Army issue cotton patrol 'giggle' hat or 'Bush hat' in DPCU (disruptive Pattern Camouflage Uniform) with a shortened brim. A pair of circular metal ventilation holes are on both sides of the crown. Interior - Tag: VIC / 1991 / size 5.6 / 8145-66.129.9988 (NATO stop number) / NO / 3807164 (in marker) / NAME / DRIP DRY / MACHINE WASHABLE / Interior - In marker: COULSON / 3807164 /giggle hat, bush hat, hat field service, dpcu

Believed to be used by Chief Petty Officer Navy Police Craig Duff whilst on duty in Mogadishu Somalia United Nation light blue go fast cap with UN cloth badge sewn above the peak; blue plastic adjusting slide at the back; cloth covered metal button permanently fixed at the centre top of the cap; there is opening at the back measuring 60 x 50 mm, cap is made of five segments that are stitched together to made up the crown of the cap and there is a stitched pattern of six parallel lines. the band on the rim has a plastic backing The UN embroidered badge is sewn centrally on the front and has the words UNITED NATIONS NATIONS UNIES cap, united nations baseball cap, cap un blue

wORN BY MEMBERS OF THE 6TH Battalion Royal Melbourne Regiment Worn by an anticedent unit of the battalion Black bearskin hat made from the skin of American Black Bears,with brown leather and metal chin strap, and black leather inside cap with drawstring. 12cm tear to top of bearskin. no inscriptions or markings, white sticker with 'swan club'. bearskin hat

Used in c1915 in Gallipoli, Egypt and France. Worn by Private Ebenezer Gray. SERN 766/24th Battalion.Brown Slouch Hat with plain puggaree (Hatband), plus metal Coat of arms.uniform hats

The Rising Sun badge also known as the General Service badge or the Australian Army badge is the official insignia of the Australian Army. Worn on the brim of a slouch hat or the front of a peaked cap (selected appointments only). The badge is readily identified with the spirit of ANZAC, the legend of the Australian Soldier (or digger) and the esprit de corps of the Army itself, due to the association with the landing at Gallipoli in 1915. Today, new recruits receive the iconic badge with their initial issue of equipment which happens within their first three days of enlistment.Rising Sun Metal badge Australian Commonwealth Military Forces 1914 - 1918 War.

Owned by Mrs H.N.LordBrown leather hat box with metal clasp and luggage tag. Blue and pink flock lining."Prov. Patent"hatboxes, clothing storage containers

Light brown heavy cotton hat box cover with leather handle and metal press studs.covers, clothing storage containers, hatboxes

Round Brown leather hat box with metal locks and brown satin lining. Contains 4 hats - #'s 299, 356, 611 and 1368."Antler"hatboxes, clothing storage containers

Presumably World War II based on comparison with silimar items. Initials inside cap may be associated with item to jacket, initialled with Lt. H. Dixon, VI. 7290.This item has historical signifigance as a an example of Australian military uniform dating presemably to World War II. Military peak cap, dark green. Brown leather chinstrap, attached by buttons on either side of visor with lettering 'AUSTRALIAN MILITARY FORCES' and Australian army insignia. Top of cap has double row of top stitching in dark yellow thread. Metal rimmed air holes (two) on each side under top of cap. Inner band made of brown leather embossed or printed with maker inscription. Rear of inner band has a row of rectangles punched through leather .50 mm in length, 22 in total, threaded through with gold coloured ribbon, tied together at centre back. Inner cap lining made of pale gold fabric, with diamond shaped liner/swear shield attached and topstitched in gold thread. Bronze coloured badge above visor with lettering Australian Commonwealth Military Forces.'THE MYER STORE FOR MEN MILITARY TAILORS MELBOURNE & ADELAIDE' on inner band in gold. Hand written initials H, and what appears to be D N (area has tears and insect damage) visible on lining behind visor. Initials in black marker. military, war, fashion, uniform, head, style, fabric, textile, cap, hat, visor, peak, outfit, myer, tailor, australian, forces, headwear, commonwealth.

A keyring issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value for the keyring is $5. The date is estimated to be approximate 2015. It was found in the archive as an example the types of items Legacy has used in fundraising. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them.Example of Legacy items that were sold up to raise money for Legacy's work. Legacy Appeal keyring with a slouch hat made of copper coloured metal.Embossed on the reverse "www.legacy.com.au / Legacy / 1800 534 229"legacy appeal, fundraising, badge week

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value is $5. The bear is one of the Legacy symbols. It is in the collection to show the modern equivalent of the older style badges. The card makes a tax deductible receipt.Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal badge of a bear's face with a dark green hat and red around the words 'Melbourne Legacy'. It is made of gold coloured metal with coloured enamel. It is on a white card with blue printing showing it's value. Badge has two posts and two separate butterfly clutches.legacy appeal, fundraising, badge week, bear

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value is $5. The bear is one of the Legacy symbols. It is in the collection to show the modern equivalent of the older style badges. The card makes a tax deductible receipt.Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal badge of a bear's face with a dark green hat and blue around the words 'Melbourne Legacy'. It is made of gold coloured metal with coloured enamel. It is on a white card with blue printing showing it's value. Badge has two posts and two separate butterfly clutches.legacy appeal, fundraising, badge week, bear

These Silver Cadet Badges are worn on the front of slouch hats which are traditionally worn by senior cadets for all parades and by the whole unit for Final Parades and formal events (ANZAC Day and Remembrance Day ceremonies). These badges are significant as most cadet units do not have a separate unit badge for their slouch hats and instead wear the similar Australian Army Cadets badge. However, a separate badge is often commonplace within school units as community units will usually display the other badge. 2 x Silver Metal Badge showcasing the Peninsula Grammar logo in a sphere of silver. Possibility for clasps on back and comes attached with two gold hat pins to do so. Peninsula Grammar Logo with engraved 'The Peninsula School Cadet Unit'cadets, cadet badge, peninsula grammar army cadet unit, silver badge, metal badge, australian army cadets, peninsula grammar

Worn on duty at Vung Tau, Vietnam, by Corporal J S Archbold, Royal Australian Army Provost Corps, while on patrol in 1968.Khaki felt slouch hat with a leather band on the inside and a leather chin strap. A material band around the outer part of the hat (puggaree) with a metal badge attached to the brim with the brass Provost Corps emblem.Fayrefield Melbourne 6 7/8 1966.james archbold, 1968, provost, vung tau, archbold, slouch

Military slouch hat Khaki with light brown puggaree with metal catch to hold badge Royal Australian Regiment "skippy" badge. Crown surrounded by wreath, kangaroo over crossed rifles "duty first Royal Australian Regiment" beneath.Made by Fayrefield Melbourne. 61/2 1968 (on leather band)slouch hat, clothing

This hat belonged to a Warrnambool undertaking firm, Beattie and Phillips. This firm was established by Christopher Beattie and Henry Phillips in 1865 and was originally situated in Koroit Street. Beattie’s son, James, took over the business in 1916 and moved to new premises at 82 Fairy Street about 1928. In 1945 the business management was transferred to James Leahy and the firm continued until 2000. The top hat was used by both James Beattie and James Leahy and would have been one of several used by the employees in this undertaking business. The suppliers of the hat were Cramond and Dickson (note that the name ‘Cramond’ is misspelt on the hat itself). John Glass Cramond and James Dickson established their clothing and drapery and ironmongery business in Warrnambool in 1855 and it continued to operate in Liebig Street until 1974. This is a highly significant item for three reasons: 1. It belonged to, and was used by, two directors of the undertaking firm of Beattie and Phillips, a most prominent business in Warrnambool for 135 years 2. It was supplied by the firm of Cramond and Dickson, a dominant retail shop in Warrnambool for 119 years 3. It is an important example of a social custom of the past – the wearing of formal wear, including a top hat, by funeral employees (even to the extent of taking the hat by rail for funerals etc outside of Warrnambool) This is a black top hat with paper and silk inserts in the inside crown and a brown leather lining stitched on to the inside of the brim. There is black corded ribbon around the brim and around the outside of the hat. The brim is made of felt with the crown showing a shiny pile. There is a small round metal insert on the top of the crown. A piece of a newspaper dated 1st January 1931 is stitched into the inside of the brimInside the hat on the bottom of the crown – ‘Extra Quality’; ‘Crammond (sic) & Dickson Warrnambool’ with a stamp logo on the silk – a British logo with a lion and a unicorn with the words – ‘Honi Soit Qui Mal Y Pense’ and ‘Dieu et Mon Droit’ In biro on inside crown are the letters ‘J.L.’ undertaker's hat, beattie and phillips, christopher beattie, henry phillips, warrnambool history

Inspector's Cap - MMTB - green cloth exterior, brown cotton interior lining with black leather pad on the inside, black leather internal hat band, black cotton hat band on exterior with a black cord at the front half of the cap terminating in two small MMTB gold metal buttons on either side, black plastic external peak and green on the inside of the cap. Hat band has two gold bands or braids around the outside of the cap. Has a manufacturers lable inside the cap - made by Mountcastle Pty Ltd of Melbourne St South Brisbane. Has two holes where the badge would have been fitted. Set of two uniform coat buttons (approx. 16mm dia) are made by Buttons of Birmingham UK. Both button have metal eye hooks on the rear. Advised of the make by Peter Hyde of the Brisbane Tramway Museum 7-1-2018.trams, tramways, uniforms, cap, buttons, inspectors, mmtb

Hat band worn by officials and team members when representing the Association at interstate matches. Two types - see item 6947 for an interwoven letter type as worn in item 6946 at the 1948 Sydney carnival. Most likely made by the MMTB Uniform clothing shop at Hawthorn.Yields information about the insignia worn by the VFTA.Navy blue cotton band with metal clips at either end with the letters "V F T A" machine sewn with a white backing strip on the rear.tramways, sports, football, vftc, hatbands, uniforms

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in gold finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "91" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ See Reg Item 395 for another example.trams, tramways, badges, inspectors, mmtb

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in silver finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "5" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ Badge was used by the Donor as part of his work uniform. See Reg Item 6010 for another example.trams, tramways, badges, inspectors, mmtb

Fur felt slouch hat with dungaree with bi metals Royal Australian Engineers (RAE) queens crown

The main sepia photo is Francis A Burchnall VX58285 POW. The small inset photo is Francis R Burchnall 1666 and VX64477 WW1, WW2, POW WW2. Refer Cat No,s 1116P and 1117P for their service details.Main photograph sepia tone of a soldier in uniform menus a hat, small B & W photo glued on top left hand corner, frame is metal with a plastic covering protecting the main photo, Small photo is not protected.“Vincent Kelly Bendigo”photopaper, framed, pow, sandakan