Rectangular silicon mould depicting Christ riding a donkey/horse with cross.Nonematcham skipper, mould, jewellery, christ, horse

Rectangular rubber mould of an oval design depicting two lovers embracing. Nonematcham skipper, mould, jewellery, lovers, nude

Plaster mould of a teardrop shaped design depicting two lovers embracing. Nonematcham skipper, mould, jewellery, lovers, nude

Square rubber mould of an oval design depicting a standing nude figure.Nonematcham skipper, mould, jewellery, nude

Silicon Mould of a hexagonal design depicting a chimera and an accompanying decorative stem.Nonematcham skipper, mould, jewellery, chimera, decorative design

Round rubber mould depicting a kneeling male nude holding an orb.Nonematcham skipper, mould, rubber, male nude, orb

This item is part of the Dodgson Collection, which was bequeathed to Queen's College in 1892 by the Rev. James Dodgson. The collection was created by Aquila Dodgson, brother of James. Aquila Dodgson was a friend of the English Egyptologist Flinders Petrie, and it was through this friendship the Aquila was able to acquire ancient Egyptian artefacts. A detailed study of the collection was made by Christine Elias "Discovering Egypt: Egyptian Antiquities at the University of Melbourne", M.A. thesis 2010.Faience mould for a ring shank with remains of pale yellow substance on interior.james dodgson, aquila dodgson, flinders petrie, faience

This handmade black glass bottle was recovered between the late 1960s to early 1970s from the wreck of the sailing ship Loch Ard. The ship was wrecked in 1878 and its remains are located at Mutton Bird Island, near Port Campbell, Victoria and bottles of liquor were listed as part of the Loch Ard’s cargo. This bottle is now part of the John Chance collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late-1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glass blower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, and the finish for the mouth is added with his tools. The dip mould gives the body a slightly textured surface, with the free blown shoulders and neck being smoother and shinier. There is usually a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. The ship Loch Ard was built on the River Clyde in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. It sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. This bottle is historically significant as an example of liquor bottles imported into to Colonial Victoria in the mid-1800s to early-1900s. Its significance is increased by also being an artefact recovered by John Chance, a diver from the wreck of the Loch Ard and other wrecks in the late-1960s to early-1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The bottle is also significant for being part of Flagstaff Hill’s collection of artefacts from the Loch Ard, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. The collection is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417. The collection has additional significance because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The shipwreck is one of the worst, and best known, shipwrecks in Victoria’s history.Bottle, black glass. Thick matt body, with slightly bumpy texture, areas with sheen, colour imperfections. Mouth is sealed, and has remnants of tape on outside. Tooled cork-top finish with ring below. Slightly bulged neck. Shoulder has some diagonal creases and a distinct line where shoulder meets body. Body tapers inwards to base. It has a bubble and diagonal crease lines. Base is uneven. Pushed up base has pontil mark. Handmade, dip mould. No inscriptions.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, loch ard, mutton bird island, eva carmichael, tom pearce, john chance, bottle, black glass, antique bottle, bulge neck bottle, handmade, dip mould, mouth blown, pontil base, blown bottle, liquor bottle, ale bottle

Green Glass Stoppered Bottle. The Moulded Label ''J.G. SPAIN Kyneton & Woodend.Lemonade.'' J.G.S. On The Front On The Back of The Bottle Are The Words ''This bottle is the property of J.G. SPAIN and must be returned.'' A Capital S Is Moulded Into The Base.''J.G. SPAIN Kyneton & Woodend Lemonade'' ''J.G.S.'' ''S''food technology, bottling, soft drink bottle

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Double ring collar blob finish on neck; upper is wide and rounded, lower is a thin ring. Diagonal lines in glass on neck, low shoulder mould seam, rippled texture around body. Push-up base with pontil mark, rectangular impression in heel. Uneven base. Sediment on inside surfaces.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

Heavy, rectangular glass inkwell with three moulded hollows (currently empty) and one moulded ledge. Approximately 12cm x 8cm x 2cm. Includes one long wooden shaft with metal tip (inkpen).writing, pen + ink, communications, coal creek, korumburra, inkwell

MOTHER'S BADGE OF ISABELLA BROOK WHO HAD TWO SONS SERVING DURING WW2.1. Badge - silver metal, bar with two yellow metal stars contained in a box."TO THE WOMEN OF AUSTRALIA" Moulded small map of Australia inside a Laurel wreath.mothers badge, ww2

This wine was produced as part of the celebration of the 150th Anniversary of Buninyong, held in 1987.A green tinged glass 750ml wine bottle with narrow neck. A '12' is pressed in glass base. White paper label printed in dark green text with a cartoon figure possibly of De Soza (?).'12' pressed into glass base. 'P15554' moulded on lower side of bottle.buninyong, 150th anniversary, wine

Chloroform was a popular anaesthetic agent in the early years of medical anaesthesia. Brown glass bottle with smooth face and vertical ridged reverse. The front has a white manufacturer's label with another smaller label on the reverse. There is sealing wax over the lid. There is also a brown cardboard box and lid for storing the bottle. Moulded into side of cardboard box: BUSH Moulded into top of cardboard box: W.J. BUSH / & CO. LTD / LONDON E8 [partially obscured by manufacturer's label stuck over top]chloroform, anaesthesia, w.j bush & co. limited, london

A clear glass jar with a rim. It has a mould seam from the rim to the base.On the base - F117B with some other indecipherable numbers.storage glass jar container

Moulding plane - astragal (shape of mould) stamped ? and JB Maker Atkin and Sonflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

3 White moulded plastic alphabets made by CINE for titling and detail card. cine titling letters, titling letters, white plastic letters, alphabet letters

Cohn Bros Bendigo soda water bottle with marble. Thick glass container to withstand pressure of carbonated liquid. Codd Patent design. "M" on base indicates date 1900-1910.Green tinted glass soda water bottle, with marble. Text moulded in glassThis bottle is the property of Cohn Bros Ltd, Bendigo. Soda Water. M on base (date indicator)bottles, soda water bottles, cohn bros bendigo, codd patent

The ashtray was found during c Mission's clearup in 2017.To be researched further. Added to collection as appears to be an artifact associated with the Mission and used by Mission staff.Moulded shell-shaped glass dish with textured underside and smooth upper side. ashtray, shell, scallop shell, shell of st james

Mould of plaque featuring image of Tasmania surrounded by helmet with wings, plaque is uncoloured.Derwent

2 sheave double block with ring, link and moulded becket, painted white.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, 2 sheave double block, double block, block

Lead Shot Caliper Crucible Mould. Made of cast iron. Approx 250mm

Round clear glass bottle, neck and shoulder moulded on a blown glass body.'W' on base.