Gloves, ladies, white, kid leather. "Maclellan and Co" Made in France. Has fine stitching around seams, 4 mother of pearl buttons along wrist split and decorative stitching of 3 parallel lines on top of glove. Size 6 1/2flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal uterine catheter. Thin, curved instrument with two oval shaped fittings attached to the sides of the instrument at the proximal end for grip. There is a seam roughly halfway down the instrument indicating that the halves of the instrument can be separated. One side of the instrument is engraved with the word 'Kloss'.'Kloss'obstetrics

This petticoat dress was sewn by Mrs. van den Heuvel and her friend M/s Jos Tersteeg for Marjo van den Heuvel to wear under a white dress on the occasion of her cousin Peter Beeker's First Holy Communion.The material was obtained from one of the many parachutes that became available during the Allied offensive of 1944/45. This material was very welcome after the deprivations suffered during the 5 year German occupation. Petticoat to be worn under child's white First Communion dress, made of white parachute silk sewn in extremely tiny stitches by machine and hand. French seams are used for the sides and shoulders; the hem is handsewn. The garment is fastened at the neck with a narrow white satin ribbon.dutch, migration

Dates of change to Nunawading Civic Centre - April 1991 to May 1997 as a result of amalgamation of Nunawading and Box Hill into City of WhitehorseDates of change to Nunawading Civic Centre oscar, geoff, seamer, peter, kennett, jeff, whitehorse civic centre, city of whitehorse

Navy polo shirt with yellow triangular trim on each side of raglan sleeve seams - front and back.Seven cm yellow strips on each side seams from underarms. Yellow embroidery over right breast. ''100,000 ounces 2011''. Yellow embroidery over left breast, ''FOSTERVILLE GOLD MINE''. Front opening fastened with three X 1 cm navy plastic buttons.New condition. Swing tags still attached. 1.Biz Collection: Style/Modele P7700 Colour/Couleur: NAVY/GOLD, Size/Taille: 2x6/27G Biz Collection. 2. Biz Cool - Description of fabricTwo labels inside neck at back !. ''Biz Collection'' 2. ''Mens 2XL/2TG. Made in China, Fabrique en Chinecostume, male, navy polo shirt

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron blacksmith made boot iron, this iron is used for setting down deck seams where they are crossed by a steam or water pipe over the deck. They were also useful in other awkward places e.g. around winches. Driving force either mallet or hammer.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Clothing. Yellow cotton ladies gloves. Three pin tucks on back of each glove.Inside wrist gathered onto strip of elastic (3.5cm X .6cm). Gloves unused. Still stitched together at side seam. 3cm split inside wrist. Old box 573.Stamped inside LH glove, 6 1/2 Cotton. Made in England.costume accessories, female, ladies yellow cotton gloves

One pair of ladies pink cotton simplex elbow length gloves. External seams on fingers. 9.5 cm slit on inside at wrist with three pearl look around buttons on one side and three button holes on the other side . Three pintucks on back of gloves.Label inside LH Glove ''Cotton Simplex Size 6 1/2 Made in Hong Kong''.costume accessories, female, ladies long pink elbow length gloves

During prestige, long distance train journeys some carriages had air-conditioning, and the majority of passengers had to brave unheated carriages. To offer some comfort during the winter months, the non-air-conditioned carriages were provided with footwarmers. These were metal containers roughly 100 mm thick and 300 mm wide, and about 750 mm long, which were filled with salt crystals (concentrated crystalline hydrated sodium acetate). The footwarmers were covered by sleeves of thick canvas, and two footwarmers were usually placed in each compartment of non-air-conditioned carriages. To activate the chemicals, the footwarmers were heated almost to boiling point. This was done by removing the canvas sleeves and placing the footwarmers in a large bath of very hot water. After they had been heated, they were removed from the bath and the sleeves refitted. They were then ready to be placed in the carriages. The McLaren patent foot warmer was used on railways in New South Wales, Queensland, Victoria and South Australia as well as South Africa and New Zealand. It was during the 1901 royal visit by the Duke and Duchess of Cornwall that these foot warmers were first used in New Zealand in the royal carriage. Before railway carriage heating was introduced, McLaren patent foot warmers were placed on the floor of New South Wales government railway carriages from 1891 to provide a little passenger comfort. The rectangular steel container worked a bit like a hot water bottle but instead of water contained six and a half kilograms of loosely-packed salt crystals, (concentrated crystalline hydrated sodium acetate). This was permanently sealed inside the container with a soldered cap. After the foot warmer was heated in vat of boiling water for about one and a quarter hours the crystals became a hot liquid. (The melting point for sodium acetate is 58 degrees). There was a whole infrastructure of special furnaces set up at stations for the daily heating of foot warmers. By 1914 the Victorian railways had 4,000 foot warmers in service and by 1935 there were 33 furnaces at principal stations to heat them. After about 10 hours the container was picked up by the handle and given a good vertical shake which helped the cooled liquid reform into a solid mass of hot crystals. Staff or sometimes passengers shook them en route when the foot warmers began to get cold. However, as they were heavy this was only possible by fit and agile passengers. At the end of the journey the containers were boiled again for reuse on the next trip. Sodium acetate railway foot warmers were introduced in Victoria in 1889, Adelaide to Melbourne express in 1899. "Shaking up" on this service took place at Murray Bridge and Stawell on the tip to Melbourne and at Ballarat and Serviceton on the trip to Adelaide. The use of foot warmers began to decline in New South Wales from the 1930s with the first trial of carriage air-conditioning in 1936, steam heating from 1948 ad LP gas heating from 1961. By the early 1960s the main services using foot warmers were the overnight mail trains. info from : http://www.powerhousemuseum.com/collection/database/?irn=67564#ixzz4UBNzVf6t Under Creative Commons License: Attribution Non-Commercial There was a whole infrastructure set up at stations for the daily heating of foot warmers in special furnaces. In Victoria alone in 1935 there were 33 heating works.Historic - Victorian Railways - Carriage Heater - Foot warmerA rectangular-shaped stainless steel casing with a welded seam down the back and welded ends. There is a handle at one end for carrying and shaking. Inside the foot warmer are two baffle plates and three trays to contain the sodium acetate. There was a cast-iron ball in each internal compartment. puffing billy, victorian railways, carriage haeter, foot warmer, passenger comfort, station furnace, railway ephemera, early heating methods

Printed cotton button through dress in colours of red, pink, green on cream background. Seven pearl buttons down front. Kick pleat in hemline,round neckline,short sleeves with turn back cuffs, and matching buckle belt. Hidden pocket in side seam.Laurie McCarthycostume, female

Officer's stable boot worn by Brigadier Geoffrey Austin Street MC who served in WWI at Gallipoli and on the Western Front. Following the war he was placed on the Reserve of Officers. He returned to military service in 1931 as Squadron Commander in the 4th Light Horse. He was promoted to the command of the regiment after l8 months' service, and finally to the command of the Third Cavalry Brigade which included the 8th Light Horse Regiment. Brigadier Street had entered Federal Parliament in 1934 and in November 1938 was seconded from military duties to serve as Minister for Defence in the Lyons Government . He was serving in this capacity in the Menzies government when he was killed in an air crash near Canberra on 13 August 1940.Representative example of officer's stable boots from the 'between the wars' period. Well preserved example of the boot makers art, complete and in good condition. Owned by well known Australian soldier and politician tragically killed at commencement of Second World War.Leather and canvas boots with leather boot and canvas upper calf legging. Leather strap at instep and leather stiffened back seam to canvas section; Leather edging at top of canvas upper legging together with adjustable strap. Foot of boot is stabilised by a metal 'Dasco' insert. On metal heal protector "704603"boot, street geoffrey a brigadier

- Worn at wedding day, May 1967 - Purchased on wearer's mother's account at Buckley & Nunn, Melbourne.- Black woollen trousers and jacket - Black ribbon trim on side seams - pleated waistline - cotton pocket - silk lapels (plain) Size 36 (men's) Garment has been altered See NA5570 (white formal shirt) NA5575 (Bow Tie) and NA5576 (Cummerbund) 'The Buckleigh" - exclusive to Buckley's & Nunnclothing, formal wear, men

This handmade green glass bottle was recovered between the late 1960s to early 1970s from the wreck of the sailing ship Loch Ard. The ship was wrecked in 1878 and its remains are located at Mutton Bird Island, near Port Campbell, Victoria and bottles of liquor were listed as part of the Loch Ard’s cargo. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber-coloured glass and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glass blower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, and the finish for the mouth is added with his tools. The dip mould gives the body a slightly textured surface, with the free-blown shoulders and neck being smoother and shinier. There is usually a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. The ship Loch Ard was built on the River Clyde in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. It sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from the fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. This bottle is historically significant as an example of liquor bottles imported into to Colonial Victoria in the mid-1800s to early-1900s. The bottle is also significant for being part of Flagstaff Hill’s collection of artefacts from the Loch Ard, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. The collection is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417. The collection has additional significance because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The shipwreck is one of the worst, and best-known, shipwrecks in Victoria’s history.Bottle, green glass wine bottle with contents. Glass has ripples and crease lines. The mouth has a seal in place. The applied lip is cracked. It has a deep pushed-up base with a pontil mark. Handmade with no seams in the body. The contents smell like apple cider vinegar. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, loch ard, mutton bird island, eva carmichael, tom pearce, john chance, bottle, antique bottle, bulge neck bottle, handmade, dip mould, mouth blown, pontil base, blown bottle, liquor bottle, ale bottle, green glass

This small handmade bottle possibly dates from the mid-1840s. It may have been used as a traveller's ink bottle, due to its wide mouth. It was recovered from the wreck of the Inverlochy and is part of the John Chance collection. Small glass ink bottles similar to this one were handmade, blown into a cup shaped mould, and sharply broken off from the blow-pipe at the neck and sealed with a cork or wax. The mouth of this bottle appears to have been added after it was blown. INVERLOCHY 1895-1902 - The Inverlochy was a steel sailing barque built in Scotland in 1895 for international trade. In 1902 the Inverlochy left Liverpool under the command of Captain E.R. Kendrick. There were 21 officers and crew and the captain’s wife Mrs Kendrick, on board, bound for Australia with cargo that included tools, chemicals, liquor (beer, whisky, stout, rum, and brandy), steel, iron, wire netting, hoop iron, tinplate and pig iron), and steel wire for the Melbourne Tramway Company, tiles, soap, soft goods and earthenware. On December 18 almost at their destination, the Inverlochy ran aground on Ingoldsby Reef at Point Addis, near Anglesea. The crew and passengers left the ship via lifeboat and landed at Thompson’s Creek, then walked about 20 kilometres to Barwon Heads. Salvagers were interested in the 10 miles of cable in the hold. Mrs Kendrick’s ‘high grade’ bicycle was amongst the items salvaged but she lost her jewellery and two pianos. By February 1903 the ship had broken up and objects such as bottles and casks of liquor were washed ashore. Bad weather shook the wreck in June 1903, causing the ship’s spars and figurehead to be washed ashore. This handmade bottle is historically significant for its association with being made and used during the mid-to-late 19th century. This handmade glass bottle is significant for its connection with the John Chance Collection, which is historically significant as an example of artefacts from wrecks that had been lost in the coastal waters of Victoria from thirty to over one hundred years before John Chance and others discovered them. These artefacts are a sample of goods carried as cargo or personal possessions, and of ship hardware of that era. The bottle is significant through its connection with the barque, Inverlochy, The Inverlochy is significant for its cargo, which is a snapshot of the array of goods imported into Australia at the turn of the 19th century, including cable for the Melbourne Tramway Company. The Inverlochy is historically significant and is registered on the Victorian Heritage Database, VHR S338. The wreck of the Inverlochy is important as an accessible dive site that shows the remains of a large international trading vessel and its contents. It is valuable for an insight into Victorian era of shipping and maritime history.Bottle, clear glass, handmade, mould-blown. Small pill bottle has round mouth and neck, straight sides, rectangular base, no seams, shiny surface. Thickness of glass varies. Mouth is lop-sided and lip varies in width. Inscription of logo on both wide sides. Inscription embossed on sides [tear drop] logo. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, inverlochy, scotland, captain e.r. kendrick, melbourne tramway company, tramway cable, ingoldsby reef, point addis, anglesea, thompson’s creek, barwon heads, victorian, antique, handmade, mould blown, small glass bottle, rectangular glass bottle, pill bottle

This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the shallow base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the lip. Bottles like this would usually be sealed with a cork.Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, green glass. Applied blop lip, deep scratch on neck. Shoulder seam, body tapers inward towards base. Wide heel, shallow base. Glass has ripples, creases, scratches and has a rough surface on the outside on one side. Sediment inside bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass

Bendigo High School tie with shell fabric with diagonal stripes of yellow and light blue. Self tipped. Diagonal seam across neck of tie where a piece has been removed. Tie has been shortened by half its original length. Worn by Merryn Ellison.Label on back of tip. 90% wool,10% Rayon, ''AUSTICO'' Name.costume accessories, female, bendigo high school tie

This jumper is part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This woolen jumper was presumably a winter addition to the DPCU.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Khaki ribbed knitted jumper with stitched Disruptive Pattern cotton elbow patches, rectangular in shape running the length of the forearm. Similar rectangular shaped patches on the left and right shoulder, bearing two epaulettes, stiched at one end and fastened with velcro and the other. The left upper arm carries a rectangular Disruptive Pattern patch with a seam down the centre, creating two long narrow pockets. Arm cuffs have external seam for approximately 100 mm from the end, indicating that the jumper may have been worn with cuffs folded over. Synthetic strip of green fabric on the interior collar behind a cream coloured label.Label on interior of collar reads: “ELEGANT KNITTING CO./PENRITH, N.S.W. 1993/(047) 32 2491/8405-66-134-9381/SIZE 115cm-125cm XL (broad arrow)/SERVICE No........./NAME.........../“ Reverse of label carries a series of care instructions including “Fasten shoulder straps before/washing/ 80% Wool 20% Nylon”camouflage, general purpose uniform, airforce, uniform, australian defence force

This doll's leg was one of a set of artefacts recovered from the shipwreck of the Loch Ard that were donated together. The doll's leg could have been from the ship's cargo or personal effects. Dolls from this era were often made from fabric, which would have quickly deteriorated in the ocean. Ceramic limbs were joined to the body by tightening the fabric around the grooves on the limbs. There are other doll's limbs in our collection that were recovered from the Loch Ard The object is now one of the shipwreck artefacts in Flagstaff Hill’s Mc Culloch Collection, which includes items recovered from the wrecks of the Victoria Tower (wrecked in 1869) and Loch Ard (wrecked in 1878). They were salvaged by a diver in the early 1970s from the southwest coast of Victoria. Advanced marine technology had enabled divers to explore the depths of the ocean and gather its treasures before protective legislation was introduced by the Government. The artefacts were donated to Queensland’s Department of Environment and Heritage Protection (EHP) by a passionate shipwreck lover and their locations were verified by Bruce McCulloch. In 2017 the Department repatriated them to Flagstaff Hill where they joined our vast collection of artefacts from Victoria’s Shipwreck Coast.The Loch Ard: - The three-masted, square-rigged iron ship Loch Ard belonged to the famous Loch Line which sailed many ships from England to Australia. The ship was built in Glasgow in 1873. The Loch Ard made three trips to Australia and one trip to Calcutta before its final voyage. The Loch Ard: - The Loch Ard left England on March 2, 1878, under the command of Captain Gibbs, bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo included straw hats, umbrellas, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that were intended for display in the 1880 Melbourne International Exhibition, including the famous Loch Ard Peacock. On June 1, 1878, Captain Gibbs was expecting to see land but visibility was reduced by fog. As it lifted, the sheer cliffs of Victoria's west coast came much closer than expected. The captain was unable to steer away and the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. The top deck was loosened from the hull, the masts and rigging came down and knocked passengers and crew overboard, and even the lifeboat crashed into the side of the ship and capsized. Of the 54 people on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael. The well-packed Minton porcelain peacock also survived, safe inside its crate. Much of the cargo was washed up, smashed and broken, and some was salvaged. Other cargo is still with the wreck at the base of Mutton Bird Island, now protected by Government law. The artefact is an example of cargo or personal items on board a ship in 1878. It provides a reference point for classifying and dating similar items. This artefact is significant for its association with the sailing ship Loch Ard, one of the best-known, and one of the worst, shipwrecks in Victoria’s history. Flagstaff Hill’s collection of artefacts from Loch Ard is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. It is historically significant for representing aspects of Victoria’s shipping history. Doll's leg, cream-coloured ceramic leg with two seams, a flat solid top and a glazed green ankle-length heeled boot. A shallow groove runs around the leg just below the top. An inscription is stamped into the leg below the groove. Recovered from the wreck of the Loch Ard. Inscribed "2"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, shipwreck artefact, wreck dive, mcculloch collection, bruce mcculloch, loch ard, 1878, loch line, victorian heritage register, sailing ship, captain gibbs, eva carmichael, tom pearce, mutton bird island, loch ard gorge, migrant ship 1878, cargo ship 1878, doll's leg, ceramic doll leg, porcelain doll leg, doll's limb, 1870s doll, 1870's toy, ceramic limb from doll, children's toy, children's recreation, doll's leg with green boot

This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the push-up base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the double collar. Bottles like this would usually be sealed with a cork, perhaps with tape or and anchored wired over it to keep it in place. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive green glass. Applied double lip; deep upper, ring lower. Slightly bulbous neck with crease lines n glass. Shoulder seam. Body tapers inwards towards base. Concave base, inward pontil mark, uneven base. Sediment inside bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass, olive glass, double collar

Camisole. Wide boat shaped neckline. Short flared sleeves, cut on the bias. Sleeves sewn in to give a rolled effect to the seam. Linen. All hand stitched. (JH) Mended in a beautiful hand stitched manner. 8 metal eyelets for tying in front. Much mended, Delicate, (Beautiful).costume, female, underwear

One pair of ladies black cotton mid-arm length gloves. External seams on side and fingers. 8.5 cm slit at inside wrist with two black pearl look round buttons on one side and two button holes on the other side. Three pintucks on back of hand.Label inside RH glove; ''KAYSE.. 6 1/2 Cotton Made in Engla.. Label frayed.costume accessories, female, ladies black cotton mid-arm gloves

Clothing. Coffee coloured polyester cotton full slip petticoat. Shaped top at bust line. Nylon ribbon shoulder straps (1cm). Scalloped top edge and hemline with decorative dark brown stitching. Embroidered floral patterns below shoulder straps and centre front above hemline.Tag 1 inside seam ''SIZE 10 to fit Bust 32, waist 24, hips 34''. Tag 2 ''LYN MAID INTERNATIONAL STYLED IN AUSTRALIA''. Permanent Press Polyester 65%, Combed Cotton 35%.Made in Hong Kong.costume, female underwear, coffee coloured full slip petticoat

This uniform would have been worn by the students of the Ballarat College of Advanced Education, School of Nursing. The colour of the uniform was changed at the request of trained staff in white.This apricot princess style dress with a central front zipper and side pockets has a collar and short sleeves. The back has a yoke with side pleats and a half belt between the seams. There is machine embroidery on the collar and sleeves. There is a blue logo printed on the left breast. Original sales tag attaches to sleevePrinted in blue - Ballarat C.A.E. Nursingnursing, university of ballarat, ballarat college of advanced education nursing, nurse uniform, textiles, costume, apron

See Ref No 4362White and maroon cotton knit football jumper. The collar, cuffs, V-shape on front are in white heavier rib and the body of the jumper is maroon. Placket front has two snap fasteners. The number '17' is on the back and is plastic and sewn on. The shoulder seams are reinforced on the inside with ribbed knit acrylic wool.costume, children's uniform

Emma Thomas Collection: Items were owned by Emma Courtis, nee Thomas. Family lived in Hamelin St, White Hills. Clothing items possibly handmade by Emma or a local person in White Hills area and used around 1890s. Emma's family include Elizabeth Penrose (mother), Solomon Thomas (father), and Richard Courtis, a blacksmith (her husband).Short sleaved, tailored blouse. Handmade with decorative embroidery and crochetwork around neckline and sleaves. Crochet work is also used on both sides of the vertical central panel which is fastened by 7 cream coloured buttons. Seams are used to make this a fitted garment at the waist. There is a "clip" in the front and back of the blouse. emma thomas, emma courtis, blouse, clothing

Opening of Whitehorse Civic Centre by Premier of Victoria, Jeff KennettOpening of Whitehorse Civic Centrewhitehorse civic centre, nunawading civic centre, kennett, jeff, city of whitehorse, anderson, richard, seamer, peter

This photograph was sent to Burnley in an envelope printed, "On His Majesty's Service" Centenary Celebrations State of Victoria & City of Melbourne 1934-35 Department of Agriculture, Melbourne and handwritten on it "Flood in orchard 1/12/1934 Mr. Jessep." Note by T.H. Kneen 8 April 1992, "Alex Jessep (left) with Tom Trahair. Periodically Tom would take leave to go back to his home town Yackandandah to test a new theory to find the lost gold seam at the Little Waterloo mine."Black and white photograph. George Russ and Frank Ellery examining the ground by the flooded river. Uprooted trees behind them.This photograph was sent to Burnley in an envelope printed, "On His Majesty's Service" Centenary Celebrations State of Victoria & City of Melbourne 1934-35 Department of Agriculture, Melbourne and handwritten on it "Flood in orchard 1/12/1934 Mr. Jessep."george russ, frank ellery, centenary celebrations, orchard, tom trahair, 1934 flood, alex jessep, uprooted trees

Cream linen, round neckline, finished with two cm wide scallops embroidered at the neckline edge in buttonhole stitch. A small embroidered eyelet at the centre of each scallop, allows a narrow pink silk ribbon to pass through as a drawstring. The centre front opening, 17cm long, fastens with on metal press-stud, and one pearl button, with handstitched button hole-one cm long. Garment has no shoulder seams, and does have extended, short sleeves, finished with embroidered scallops, as the neckline. Five petal shaped cutwork decorations are on each sleeve, and both sides of front placket.Garment is slightly flared at the hemline. French side seams - machined and machine stitched hem.costume, children's, cream linen child's nightgown

Clothing. Narrow shoulders straps-.8 cm, hold the curved slightly peaked bodice-shaped at both front and back. One dart at each side seam of front. Centre front is lavishly embroidered in a chinese style, with some cut work, some shadow work and silk thread floral embroidery. Neckline is bound with a fine 'rouleau' type binding. Front has a V-shaped panel inserted from the right hemline, and back has an identical panel at left hemline. French side seams, machine stitched. Hemline bound as for neckline. Inside left hand side-on dart below arm hole, a small piece of white tape is stitched, bearing the initials;M.C.costume, female, pink embroidered silk petticoat

Emma Thomas Collection: Items were owned by Emma Courtis, nee Thomas. Family lived in Hamelin St, White Hills. Clothing items possibly made by Emma or a local person in White Hills area and used around 1890s. Emma's family include Elizabeth Penrose (mother), Solomon Thomas (father), and Richard Courtis, a blacksmith (her husband).Black jacket is handmade with a heavy cotton lining. Collar and hem of the garment are lined with black velvet. Sleeve hems also lined with a band of black velvet. Hock and eye fasteners provide centre closing. Twelve small, black buttons (decorative) have been sewn vertically along the centre panel from collar to hem. Boning has been inserted into both of the side seams to shape the jacket. Darts, with decorative stitching, have also been used to tailor the front of the jacket around the centre closure panels (Three darts on either side of the centre closure panels). A central seam runs through the jacket back which ends in a "scalloped" shape.emma thomas, emma courtis, clothing, jacket