Patrick Toole was born in Corowa on 7 September 1913. In the early 1930s the family moved to Wodonga. Pat became an apprentice mechanic with Bill Dobbie and became a partner in 1936. Patrick Toole took over business in his own right on 23 August 1939. Toole’s Motors also ran a car and truck agency, a towing and crane depot, as well as a small disposal section. After breaking his leg in 1963, Pat extended the disposals business and by 1965 it was running as Wodonga Disposals and later, Toole’s Disposals. At their peak Toole’s employed 70 people across their various businesses including the garage, wreckers, towing businesses, a storage shed at Bandiana and the Disposal Store. Pat died in Wodonga on 10 November 1976 and the Disposals Store was taken over by his twin sons, Frank and Bill. His other sons, Pat and Jim ran the North Eastern Truck Wreckers. Tooles Disposals acquired most of their stock from Government auctions and also became licensed second hand dealers. They sold a wide range of military and non-military equipment from clothing to footwear and equipment for cooking and camping. They also shipped scrap metal to Japan and sourced uniforms and other items from Japan and East European countries. The business continued on the corner of High Street and Stanley Street for over 70 years, but the Toole family decided to sell the building in 2009. The building was eventually sold to a local business consortium in 2010. Toole’s continued to operate until May 2011. Thee building was demolished in 2013. Bill Toole continued Toole’s Disposals as an online business with numerous Australian and international clients.These images document an important and long standing business in Wodonga.A collection of images and a business card for the company of Tooles Garage and Disposals in Wodonga. Images depict the business at various stages in its development over more than 70 years.Photo 1 Beneath image - 1929 W. DOBBIE MOTOR & GENERAL ENGINEER / Con Lindsay, Alec Padgett, Bill Dobbie, Pat Toole Photo 2 Beneath image - 1940 A. L. TOOLE MOTOR & GENERAL ENGINEER / Fay Fulford, Gerry Nelder, Mick Presnell, Pat Toole Photo 3 On building - TOOLES MOTORS est. 1939/ TOOLES MOTORS PTY. LTD./ DISPOSALS/ DISPOSALS AT CITY PRICESt Photo 4 On sign - TOOLES DISPOSALS Photo 5 Business cardwodonga businesses, toole's disposals, businesses high street wodonga

James S Steele tool boxSaw tooth set metal Eclipse No 77 Made in Englandflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Tools used by Mrs Duncan's grandfather, when he was a carpenter on the clipper ship of the 1870's between England and Australia.Latge wooden handle with small metal saw.trades, carpentry

Disston Saw Works of Philadelphia was one of the better known and highly regarded manufacturers of handsaws in the United States. During the Machine Age, the company was known as Henry Disston & Sons, Inc. a supplier of industrial saw blades. History: The story of handsaws in the United States mirrors the technical and development of steel in Sheffield, England, which was the center of handsaw production during the 18th century and through most of the 19th century. England's political and economic lock-on steel making in the colonies held American saw makers at bay until well after the Revolutionary War. American steel producers were unable to compete until the US government introduced import tariffs to level the playing field in 1861. Henry Disston: Henry Disston (1819–1878) began his career as an American saw maker in Philadelphia. He had emigrated from England in 1833 and started making saws and squares in 1840. In 1850, he founded the company that would become the largest saw maker in the world, the Keystone Saw Works. Some five years later, Disston built a furnace—perhaps the first melting plant for steel in America and began producing the first crucible saw steel ever made in the United States. While his competitors were buying good steel from Britain, he was making his own, to his specification, for his own needs. Disston subsequently constructed a special rolling mill exclusively for saw blades. Over the following decade, the Disston company continued to grow, even while dedicating itself to the Union Army's war effort. In 1865, when his son Hamilton Disston rejoined the business after serving in the Civil War, Disston changed the company's name to Henry Disston & Son. Henry Disston and his sons began to set the standards for American saw makers, both in terms of producing high-quality saws and files in 1865 through his development of innovative manufacturing techniques. In September 1872, Henry Disston and two other men dug a part of the foundation for what was to become the largest saw manufacturing facility in the world: Disston Saw Works. This was in the Tacony section of Philadelphia. Having previously moved his expanding business from near Second and Market Streets to Front and Laurel Streets. It took over 25 years to move the entire facility to Tacony. Henry Disston was renowned for having one of the first industries that exhibited environmental responsibility, as well as a paternalistic view towards his employees. For example, he had thousands of homes built in Tacony for his workmen. Funds to purchase these homes were made available through a building and loan association set up by the Disston firm. His caring influence on the community was evident in everyday life. To meet employees' cultural needs, a hall and a library were built with Henry Disston agreeing to pay a fixed sum towards its maintenance. The Tacony Music Hall was erected in 1885, also with the assistance of Disston money. Henry Disston had fallen ill by 1877 and never truly recovered; he suffered a stroke and died the next year. This came only one and a half years after seeing his products receive the highest honors at the great Philadelphia Centennial Exposition of 1876. His vision of a working-class community and the completion of the transfer of his enormous saw plant was carried out by his wife and his sons. The company, by the early 20th century, cast the first crucible steel in the nation from an electric furnace in 1906. The firm's armor-plate building near Princeton Avenue and Milnor Street contributed tremendously to the World War II effort. But the company's innovation and industriousness would not last forever. In 1955, with mounting cash-flow problems and waning interest on the family's part to run the firm, Henry Disston and Sons were sold to the H.K. Porter Company of Pittsburgh. Porter's Disston Division was sold in 1978 and became the Henry Disston Division of Sandvik Saw of Sweden. This division was then sold in 1984 to R.A.F. Industries of Philadelphia and became known as Disston Precision Incorporated, a maker of specialized flat steel products. In 2013, R.A.F. Industries sold Disston Precision Inc. in a private sale. Although the company has ceased making Disston handsaws, the Disston brand name still exists in this firm. A tool used to set and sharpen cross cut saws used to fell trees for building construction made by a well known American maker whos firm pioneered the making of saws and their related items including files.combination cross cut saw raker and gauge/jointerDisston USA in the castingflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Hand Operated Rail Saw Out on the track in the old days, it was sometimes required to cut a piece of railway track. Before the use of generators and oxy cutting, the only way to do this was with a hand saw. This is the machine operated by two people, that would cut a piece of rail in half. And when the rail was cut, it was usually required to join it to another rail which required putting in 4 to 6 holes in the rail with a Hand Operated drill. Historic - Railways Permanent Way and Works - track equipment - Hand Operated Rail Saw Hand Operated Rail Saw made of cast metalpuffing billy, hand operated rail saw

Standard issue multi-use tool as used by Australian servicemen during the conflict in Vietnam (1962-1972).Folding digging toolpick, shovel, vietnam, entrenching tool

John Heath tool boxBox wooden tool box painted green used as display for John Heath shipwright tools. 850mmL x 410mmH x 375mmW (Note inside box: The missing tools are stored in a box in the cupboard in the shipwright display area)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tool box, j heath

This raker/jointer/guage set is a sharpening tool for cross cut logging saws. The logging saws used in the early 1900's for the clearing of forests required constant sharpening of their "cutting teeth". The logging of forested areas during these times was very much a "hands on" method of either one or two men by the use of saw or hand axe. Chain saws, chain and ball(clearing) and bulldozing methods came in the mid 1900's.This particular saw sharpening method was used by surveyors laying down boundaries for the S.E.C. Victoria Hydro Electricity Scheme (1920's). This item was given to a local Kiewa Valley lad who accompanied the initial surveyors. The lad was responsible for the tendering and feeding of the surveyors "pack horses". Surveys during this period and in the dense mountainous terrain of the Victorian Alps was both exhausting and hazardous. Overnight accommodation at various log cabins was not always possible and swag/tent alternative was the "fall back" This raker/jointer saw sharpener was made in the USA (DISSTON) from cast and flat iron. The main body has been painted in orange. It has three adjustment screws on the top horizontal bar and one bolt on(adjusting) leveling platform on the bottom. The small size and weight of this saw sharpener was ideal for the travelling/mobile logger or surveyor(as in this case). The main frame resembles two towers connected by two horizontal bars and the top of the towers has a horizontal bar with adjustment screws. See KVHS 0090 (B) for setting stake wedge adjusting the rake and cutting angle and KVHS 0090 (C) for a small spanner (for adjustments).On one inner supports is stamped "DISSTON" and on the other "U.S.A."hand tool, saw, sharpening method, tree felling.

Very old. Ref. Pages 6 and 7 Tools for all Trades Catalogue. The braces vary in quality (strength) depending on what materials are used to make them.The brace is a hand operated tool for boring holes in wood, consisting of a crank-shaped turning device. The brace that grips and rotates the hole-cutting tool, the bit.Used by woodworkers in the Kiewa Valley.Vintage hand drill braces. All different and not all complete. Made of cast iron, steel with wooden handles. The drills fit into one end of the brace which is turned to make a drilling motion. A brace is a hand tool used with a bit (drill bit or auger) to drill holes, usually in wood. Pressure is applied to the top while the handle is rotated.brace and bit, woodwork, hand drilling

A small metal hooked tool for the "Beehive" benchtop sock knitting machine.A small metal hooked tool.knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting

Employment is a key area that blind or vision impaired people are under-represented. These photographs were taken to demonstrate and provide examples of how blind and visually impaired workers can undertake skilled positions. A woman works at a switchboard, using an assistive device, whilst another woman sits beside her. A young man dressed in a blue coverall and goggles, uses a bandsaw to cut through an object, whilst another uses a circular saw to cut wood. A man in a workshop, with a large toolset on the wall, operates a machine.employment, royal victorian institute for the blind

Saw used in the RVIB workshop. It has wide teeth on one edge and narrower teeth on the opposite side of the blade. The handle is made of resin with three rivets holding the handle to the blade.1 metal saw with wooden handle and dual bladesroyal victorian institute for the blind, employment

Maintenance tool for Wolseley and Lister handpieces. Brand - Lister.Maintenance tool for Wolseley and Lister handpieces.LISTERshearing machinery, r.a. lister & co. ltd., de josselin, mr john

Maintenance tool for Wolseley and Lister handpieces. Brand - Lister.Maintenance tool for Wolseley and Lister handpieces.LISTERshearing machinery, r.a. lister & co. ltd., de josselin, mr john

Maintenance tool for Wolseley and Lister handpieces. Brand - Lister.Maintenance tool for Wolseley and Lister handpieces.LISTERshearing machinery, r.a. lister & co. ltd., de josselin, mr john

Maintenance tool for Wolseley and Lister handpieces. Brand - Lister.Maintenance tool for Wolseley and Lister handpieces.LISTERshearing machinery, r.a. lister & co. ltd., de josselin, mr john

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, increasing efficiency.double ended steel saw with "M" patterned teeth. Handles missing. All rivets in placechurchill island, crosscut, saw, tools, machinery