Showing 29677 items
matching c1950's
-
Hume City Civic Collection
Photograph, late 1930s
The photograph was probably taken on either Anzac Day or Remembrance Day, 11 November because some men are wearing medals and others are holding wreaths.A sepia print of a group of 21 men standing at attention outside the newsagency in Brook Street, Sunbury. Three men are holding wreaths. There are two drummers and one is in uniform. There are two dogs near the drummers. Some men are wearing medals.KODAK PRINT / VELOX / (S) 579anzac day, ceremonies, festivals and celebrations, remembrance day, brook street, sunbury, men, clothing and dress, dogs, armed forces, sunbury newsagency, newagents, shops, businesses, george evans collection -
Kew Historical Society Inc
Work on paper, Madford: the property of A.S. King Esq, c.1875
The Victorian-era mansion Madford in Wellington Street had several incarnations before it was finally demolished. While the precise details of its original construction have not been discovered, we know that it was originally named Elm Lodge, and that the property was offered for sale in 1863 by Thomas Mitchell, of the firm Mitchell & Bonneau, wholesale ironmongers and merchants. The house was sold in about 1873 to William Siddeley (1827-1905), who was described on the occasion of his death as ‘the father of Australian shipping’. The next owner was Arthur Septimus King (1827- 99), who renamed the house Madford after his purchase of the property in 1875. It was A.S. King for whom this artwork was completed. Following King’s death in 1899, portions of the property were sold, including to the Borough of Kew in 1905, to form the Alexandra Gardens. Then, in 1920, the house and its remaining lands were sold to the Catholic Church who opened St Anthony’s Home for Children on the site in 1922. That building was promptly demolished, and the site redeveloped circa 1976.Gift of James Pearson, 2022This fine perspective drawing of the architectural elements of Madford [formerly Elm Lodge, later St Anthony's Home for Babies] is contrasted with the freer addition in watercolour of the layout and plants of the garden facing Wellington Street. The view selected is the south-facing main facade and the west facing side. After A.S. King purchased the house in 1875, it was extended with new wings at the rear to accommodate his large family. There is no indication of these extensions in the painting so its creation must predate the renovations, and probably depicts the original building on the site."MADFORD / The Property of A. S. KING Esq"elm lodge, madford, st anthony's home for babies, houses -- wellington street -- kew (vic.), thomas mitchell, william siddeley, arthur septimus king -
Ballarat RSL Sub-Branch Inc.
Duffle bag, C. 1940
This gear bag was issued to Sergent Harold Loraine Reed, who was born in 14 Aug 1889 in Portland, Victoria. Reed enlisted in the army in 1940 in Ballarat to serve in WWI, and was discharged from 8 Battalion in 1943. Gear bags such as this were standard issue to servicemen. Soldiers would fill their gear bags with essential equipment (mess tins, clothes, etc.) and carry them with them from post to post, or ship them to their destination ahead of time.Khaki coloured canvas bag that is cylindrical in shape with the owner's rank, name, and service number written on the front of the bag in white paint. The base of the bag is rounded, while the top is open with 11 eyelets (one missing) through which a cotton cord has been threaded. Each end of the cord has been wrapped with red tape.V58131 / S/Sgt. H.L. REEDmilitary equipment, duffle bag, barracks bag, kit bag, wwii, second world war (ww2) -
Federation University Art Collection
Work on paper - Artwork - Bookplate, Ex - Libris Shelley. J. Gillespie
After a quiet period, interest in bookplates in Australia began to increase in the early 1970s, Entrepreneurial art and book collectors such as Edwin Jewell and others commissioned multiple bookplate designs from a range of well known fine artists. At a 1997 meeting in Melbourne of the Ephemera Society of Australia Edwin Jewell and others announced the formation of the Australian Bookplate Society. The society was instrumental in promoting the art of the bookplate through establishment of the Australian Bookplate Design competition. The competition includes a design award for secondary schools students.3/4 signed S Gillespiebookplate, printmaking, australian bookplate design award, keith wingrove memorial trust -
Flagstaff Hill Maritime Museum and Village
Domestic object - Plate
The Process of Making Pottery Decorating, Firing, Glazing, Making, Technical There is a rhythm and flow to clay. It can’t be done all at once! Even the making process! It can take weeks to get everything done, especially if you can only work on your pottery once a week! Even though we have three hour classes, it’s often just not enough time! Here is an overview of some of the processes so you have a bit more grasp on some of the technical stuff! Step One – Design There are SO many ideas out there for making stuff in clay! From delicate porcelain jewellery, through to heavy sculptural work and everything in between. Deciding your direction is sometimes not that easy – when you first start, try everything, you will naturally gravitate to the style that you enjoy! The options and variations are endless and can get a wee bit overwhelming too! Check in with me before you start to ensure your ideas will work, what order you might do things, how you could achieve the look you are seeking and any other technical data required! Step Two – Making Clay is thixotropic. This means that as you work with it, the clay first gets sloppier and wetter, before is begins to dry in the atmosphere. For most things, you simply can’t do all parts of the project at once. An example of work order might look like: Get last weeks work out from the shelves Prepare clay for today’s work – roll your clay, prepare balls for throwing, make the first stage of a pinch pot) Clean up last week’s work and put it on the shelf for bisque firing Check that you have any glazing to do – and do enough of it that you will have time to finish your main project Do the next step of your next project – there might be a further step that can’t be complete immediately, in that case, wrap your work well and put onto the shelves. Letting your work rest for a while can really help keep your work clean and professional looking. Many things require bagging under plastic to keep it ready for work the next week – put your name on the outside of the bag so you can find your work easily. We have stickers and markers. Consider how you want to decorate your work – coloured slip can be applied at a fairly wet stage (remembering that it will make your work even wetter!). Trying to apply slip to dry clay won’t work! If you want to do sgraffito – you will need to keep the work leather hard (a state of dryness where you can still work the clay with a little effort and a little water and care). Step Three – Drying Most of the time your work can go into the rack uncovered to let it dry out for the following week. If you want to continue forming or shaping you will need to double bag your work – put your work on a suitable sized bat and put the bat in a bag so the base of the bag is under the bat, then put another bag over the top of the work and tuck the top of the bag under the bat. If you want to trim (or turn) your thrown work the following week, it should also be double bagged. If your work is large, delicate, or of uneven thicknesses, you should lightly cover your work for drying. When considering the drying process, bare in mind the weather, humidity and wind! The hotter and dryer, the faster things dry and work can dry unevenly in the shelves – this can lead to cracking – another time to lightly cover your work for drying. Step Four – Trimming and Cleaning Up Your work is dry! It is called greenware now and it is at it’s most fragile! Handle everything with two hands. I often refer to soft hands – keep everything gentle and with your fingers spread as much as possible. Try to not pick up things like plates too much, and always with both hands! Before your work can be bisque fired it should be “cleaned up”. You work won’t go into the kiln if it has sharp edges – when glazed, sharp edges turn into razor blades! Use a piece of fly wire to rub the work all over – this will scratch a little so be light handed. Use a knife or metal kidney to scrape any areas that require a bit more dynamic treatment than the fly wire offers! Finally, a very light wipe over with a slightly damp sponge can help soften and soothe all of your edges and dags! Trimming thrown work: If you are planning to trim (or turn) your thrown work (and you should be), make sure you bag it well – your work should be leather hard to almost dry for easiest trimming. Use this step to finish the work completely – use a metal kidney to polish the surface, or a slightly damp sponge to give a freshly thrown look. Wipe the sponge around the rim after trimming, and check the inside of the pot for dags! Trimming slip cast work: Usually I will trim the rims of your work on the wheel the following day to make that stage easier, however you will still need to check your work for lumps and bumps. Last but not least – check that your name is still clearly on the bottom of your work. Step Five – Bisque Firing When the work is completely dry it can go into the bisque kiln. The bisque kiln is fired to 1000°C. This process burns off the water in the clay as well as some of the chemically bound water. The structure of the clay is not altered that much at this temperature. Inside the bisque kiln, the work is stacked a little, small bowl inside a larger bowl and onto a heavy plate. Smaller items like decorations or drink coasters might get stacked several high. Consideration is paid to the weight of the stack and shape of the work. A bisque kiln can fire about one and a half times the amount of work that the glaze kiln can fire. The firing takes about 10 hours to complete the cycle and about two days to cool down. Once it has been emptied the work is placed in the glaze room ready for you to decorate! Step Six – Glazing Decorating your work with colour can be a lot of fun – and time consuming! There are three main options for surface treatment at this stage: Oxide Washes Underglazes Glazes Washes and underglazes do not “glaze” the work – It will still need a layer of glaze to fully seal the clay (washes don’t need glaze on surfaces not designed for food or liquid as they can gloss up a little on their own). Underglazes are stable colourants that turn out pretty much how they look in the jar. They can be mixed with each other to form other colours and can be used like water colours to paint onto your work. Mostly they should have a clear glaze on top to seal them. Oxides are a different species – the pink oxide (cobalt) wash turns out bright blue for instance. They don’t always need a glaze on top, and some glazes can change the colour of the wash! The glazes need no other “glaze” on top! Be careful of unknown glaze interactions – you can put any combination of glaze in a bowl or on a plate, but only a single glaze on the outside of any vertical surface! Glazes are a chemical reaction under heat. We don’t know the exact chemicals in the Mayco glazes we use. I can guess by the way they interact with each other, however, on the whole, you need to test every idea you have, and not run the test on a vertical surface! Simply put, glaze is a layer of glass like substance that bonds with the clay underneath. Clay is made of silica, alumina and water. Glaze is made of mostly silica. Silica has a melting point of 1700°C and we fire to 1240°C. The silica requires a “flux” to help it melt at the lower temperature. Fluxes can be all sorts of chemicals – a common one is calcium – calcium has a melting point of 2500°C, however, together they both melt at a much lower temperature! Colourants are metal oxides like cobalt (blue), chrome (green through black), copper (green, blue, even red!), manganese (black, purple and pink) iron (red brown), etc. Different chemicals in the glaze can have dramatic effects. for example, barium carbonate (which we don’t use) turns manganese bright pink! Other elements can turn manganese dioxide brown, blue, purple and reddish brown. Manganese dioxide is a flux in and of itself as well. So, glazes that get their black and purple colours, often interact with other glazes and RUN! Our mirror black is a good example – it mixes really well with many glazes because it fluxes them – causes them to melt faster. It will also bring out many beautiful colours in the glazes because it’s black colouring most definitely comes from manganese dioxide! Glaze chemistry is a whole subject on it’s own! We use commercial Mayco glazes on purpose – for their huge range of colour possibilities, stability, cool interactions, artistic freedom with the ability to easily brush the glazes on and ease of use. We currently have almost 50 glazes on hand! A major project is to test the interactions of all glazes with each other. That is 2,500 test tiles!!!! I’m going to make the wall behind the wheels the feature wall of pretty colours! Step Seven – Glaze (Gloss or sometimes called “Glost”) Firing Most of the time this is the final stage of making your creation (but not always!) The glaze kiln goes to 1240°C. This is called cone 6, or midrange. It is the low end of stoneware temperatures. Stoneware clays and glazes are typically fired at cone 8 – 10, that is 1260 – 1290°C. The energy requirement to go from 1240°C to 1280°C is almost a 30% more! Our clay is formulated to vitrify (mature, turn “glass-like”) at 1240°, as are our glazes. A glaze kiln take around 12 hours to reach temperature and two to three days to cool down. Sometimes a third firing process is required – this is for decoration that is added to work after the glaze firing. For example – adding precious metals and lustres. this firing temperature is usually around 600 – 800°C depending upon the techniques being used. There are many students interested in gold and silver trims – we will be doing this third type of firing soon! After firing your work will be in the student finished work shelves. Remember to pay for it before you head out the door! There is a small extra charge for using porcelain clay (it’s more than twice the price of regular clay), and for any third firing process! Once your work has been fired it can not turn back into clay for millennia – so don’t fire it if you don’t like it! Put it in the bucket for recycling. https://firebirdstudios.com.au/the-process-of-making-pottery/Ceramics have evolved over thousands of years.White earthenware dinner plate. Crazing evident all over.Backstamped ‘Made in England S LTD’flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ceramics, tableware -
Flagstaff Hill Maritime Museum and Village
Functional object - Fresnel Glass Lens, Early 20th century
A Fresnel lens is a type of composite compact lens developed by the French physicist Augustin-Jean Fresnel (1788–1827) for use primarily in lighthouses. Made from high-quality glass Fresnel lenses were used originally in lighthouses and later for many other applications They were later being used for automobile headlamps, brake, parking, and turn signal lenses, and many other applications. Fresnel lenses used in lighthouses were considered state of the art from the late 19th through to the middle of the 20th century. The subject item is a Fresnel replacement lens used in a ships navigation light. For lighthouses, these lenses have now been replaced with much less expensive and more durable aerobeacons, which themselves often contain plastic Fresnel lenses. The lens design allows the construction of lenses of large aperture and short focal length without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. The simpler dioptric (purely refractive) form of the lens was first proposed by Count Buffon and independently reinvented by Fresnel. The catadioptric form of the lens, entirely invented by Fresnel, has outer elements that use total internal reflection as well as refraction; it can capture more oblique light from a light source making the light visible from greater distances.The subject item at this time cannot be associated with a historical event, person or place, provenance is unknown, the item is a replacement for a ships navigation light and it is believed to have been produced before 1950.Fresnel glass replacement lens for a navigation side lamp of a ship. W.T.G (S) and 10x7 S.STR.ENGL.125warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fresnel lens, maritime light, ships navigation light, augustin-jean fresnel, lighthouse lenses, lighthouse, navigation, warning light -
Warrnambool and District Historical Society Inc.
Serving dish, Fish Dish, Early 20th century
This fish dish is an attractive household item which would have been used in the early to mid 20th century when the more affluent families in society were entertaining. It is not a common item and most likely would not be seen in households today. This dish has no known local provenance but is of considerable interest as a household item not seen today. It will be useful for display.This fish dish has an electro-plated nickel silver holder with two curved pieces of metal joined at the centre to form a base. There are four round metal balls at each end of the curved metal to stabilise the stand. Four curved metal pieces are attached to the base and hold a rectangular-shaped piece of metal and a handle. Fitting into this piece of metal is a cut glass container which is heavily patterned on the sides and base. The lid of this container is rectangular with rounded edges and silver-plated. The top of the lid has a silver-coloured free-standing fish model attached to the lid by a metal stud. The fish is a little loose on its stand. The handle can be folded down. ‘E P N S 62’ household items, history of warrnambool -
Bendigo Military Museum
Accessory - WEBBING PACKS, 1939- 1945
T. Woolman, Volunteer Defence Corp1. Bag - canvas, Brown, single strap, flap, cover, metal studs. 2. Bag backpack - canvas, brown, leather straps, metal buckles.1. ARP AMM Section S.uniform, accessory, bags -
Queenscliffe Maritime Museum
Equipment - Switches
Switches from HMAS Canberra taken prior to scuttling in October 2009Ex HMAS Canberra was the first ex naval vessel to be scuttled off Barwon Heads to form an artificial reef and to facilitate recreational diving.3 Marine Alarm Switches on metal frame; General, Unknown usage, Collision AlarmContact Type S-2JRM3A-2switches, navy ships, hmas canberra -
Woodend RSL
Trunk, MID 20TH CENTURY
PERSONAL TRUNK OF CAPTAIN PETER SPENCER HAYMAN MCThis trunk was owned by Peter Spencer Hayman, who was regarded as a ‘Tobruk hero’. Hayman was the son of a Bank manager, Spencer Lewis Hayman and Agnes Lindsay Hayman. He was born in Exeter S.A. on 23/11/1916. He enlisted in the Australia Army at the age of 23 on 13/05/1940. His service number was VX14987. Hayman was a leader of a fighting patrol and served in multiple sites in Syria and Lybia. During his service in Lybia he lead his campaign through great difficulty and bravery in Tobruk. Although wounded by a grenade, he continued to lead his men into an enemy stronghold until resistance from a joining post compelled him to break off the engagement. He successfully brought his party back with very few casualties. Hayman was awarded the military cross in 1941. He was a Lieutenant when awarded, and was made captain of the 2/24 Australian Infantry Battalion shortly afterwards. He was killed in action on the 11/07/1942 and is buried in the El Alamein war cemetery. His father was flown to London to receive the medal. The inscription on his headstone reads; “Beloved son of Spencer and Agnes Hayman of Bendigo” (AII.A.21. – cemetery/memorial reference number). As an item owned by a ‘Tobruk hero ’ who was awarded the eminent military cross for bravery, ‘forceful leadership’ and ‘splendid courage’, this trunk is of national historic and social significance. It also has great interpretive capacity as an item that speaks of an impressive military story. Standard Army issue trunk. 88cm L x 51cm W x 33cm D. Dull grey in colour. There is provision for a tray to be fitted just under the lid. This tray was the same physical size as the trunk. The base has 2 cleats (88cm x 5.5cm), made of timber, to keep the trunk off the ground. An additional hasp and keeper have been fitted (near the centre of the lid) to hold it shut. The original type lock needed a key and were not very serviceable.P S H VX14987 408 -
Ballarat Tramway Museum
Newspaper, The Courier Ballarat, G A Laurens - first tram driver, 31/12/1994 12:00:00 AM
Cutting from the In Retrospect section of The Courier, Ballarat, Saturday 31/12/1994 in the 50 years ago section about the retirement of Mr. G.A. Laurens who retired from SEC in August, who drove the first electric tram in Ballarat and in Bendigo.Two "x"'s in blue ink.trams, tramways, sec, ballarat, bendigo, first tram -
Whittlesea Historical Society Inc.
Photograph, Probably a Wuchatsch from South Gippsland, c. 1892
Probably a Wuchatsch from South Gippsland, Victoria.Sepia coloured photograph mounted on card.Probably a Wuchatsch from S Gippsland.wuchatsch family, south gippsland, rifle -
Whitehorse Historical Society Inc.
Domestic object - Cup, saucer & plate
Used by Mrs Lina Plehn in Germany and brought to Australia when the family migrated.Art Deco in blue & white featuring a blue rose pattern with blue scallops on white background. .1 Cup .2 Saucer .3 Plate'Crown' & an 'S'. 'ECHT TUPPECK' 'TIEFFENFURT'domestic items, crockery -
Dandenong/Cranbourne RSL Sub Branch
Army TEWT bag, Unknown
WWII historical significanceWWII Green canvas back pack. Letters 'L' in red and 'S' in black -
Ringwood RSL Sub-Branch
Equipment, Oil bottle
Used for rifle maintenanceBrass oil bottle for 303 rifle missing spoonHJ & S Crown over VS -
Kilmore Historical Society
Websters Pocket Dictionary, Unknown
Green cloth-bound hardcover book. Worn at corners, loss of colour front cover. Foxing to front pages, pencil scribbles some pages. Back flyleaf missing. 268 pp. Good condition.'S - /9' inside front cover.dictionary -
Brighton Historical Society
Accessory - Parasol, late 19th century
This parasol belonged to Clara Johnstone Miller (nee Bell, 1866-1910). Clara was the only daughter of Mr James Bell, a councillor of the Shire of Leigh (today a part of Golden Plains Shire) and owner of Woolbrook Homestead in Teesdale, near Geelong. In 1888, Clara married prominent businessman, racehorse owner, racing identity and pastoralist Septimus Miller (1854-1925). Septimus was the sixth of seven children born to Henry 'Money' Miller and Eliza Miller (nee Mattinson). 'Money' Miller was a well known financier and politician and reputedly one of Australia's wealthiest people in his time. In 1889, Clara and Septimus moved into the house 'Cantala' in Dandenong Road, Caulfield. They had one child, Gwendoline Stewart Miller, who died in 1902 at the age of thirteen of diabetes - a largely untreatable condition at the time (insulin would not be discovered until 1921). Clara died in 1910, aged only 44. Septimus subsequently married Helen (nee Henderson), with whom he had a son, Ronald (1915-1990). The Millers were buried in the Brighton General Cemetery in a large Gothic-style vault. Upon Clara's death, Septimus sent much of her clothing and Gwendoline's to her mother Mary Bell. Some of these items were passed down to two of Clara's nieces, Miss Mary Bell and Mrs Lois Lillies, who donated them to BHS around 1973.A grey silk parasol with mauve stripe decoration, wooden handle and brass fittings from the late 19th century. The handle appears to be missing a decorative finish from the end.Mrs. S. Miller, Cantala, Caulfield.clara miller, woolbrook, septimus miller, henry 'money' miller, gwendoline miller, cantala, caulfield, brighton general cemetery -
Federation University Historical Collection
Book, Petrology for students : an introduction to the study of rocks under the microsope, 1908
Red hard covered book of 329 pages. Includes black and one line illustrations of microscopal views. Fourth edition.Signed inside front "S. Mayo"petrology, s. mayo, alfred harker, microscope, rocks, sam mayo -
National Vietnam Veterans Museum (NVVM)
Photograph, Kiowa OH58A
Framed coloured Photograph in a black frame of Australian Army Kiowa Helicopter parked at an unknown Airstrip.Australian Rondel, S/N 15236photograph, oh58a, helicopter -
National Vietnam Veterans Museum (NVVM)
Photograph, Aircraft Maintenance
Framed coloured photograph of a Bell 47 Sioux Helicopter and a Cessna 180A Aircraft in a jungle clearing. Mechanics are working on the helicopterArmy Rondell, Bell S/No: 637photograph, bell 47 sioux, cessna 180 -
Clunes Museum
Photograph - PHOTOGRAPH PHOTOCOPY, C1940
PHOTOGRAPH ORIGINALLY TAKEN IN LIGAR STREET, CLUNES.1 BLACK AND WHITE PHOTOCOPY OF YOUNG WOMEN AND GIRLS TAKING PART IN A PARADE TAKEN LIGAR ST. CLUNES C 1940 .2 LARGE VERSION OF ABOVE .3 LETTER FROM ROSEANNE PEART - SUPPLEMENTARY FILE LIGAR ST. CLUNES (1940'S?)local history, photography, events and celebrations -
Warrnambool and District Historical Society Inc.
Work on paper - Booklet, Five Australian Christmas Carols
Five Australian Christmas Carols was written by John Wheeler and music by William G James. William James came from Ballarat and John Wheeler was from Colac. James was a concert pianist who graduated from the Melbourne Conservatorium. He went to London and played the Proms and wrote a series of Australian themed songs for Dame Nellie Melba. He became the first Federal director of Music for the ABC until 1957. It was at the ABC that he met Wheeler a staff writer who wrote verse and songs. These five carols which have a distinct Australian flavor, were written between 1848 and 1957.While this collection has no direct link to Warrnambool, the works contained in the collection Five Australian Christmas Carols would have social significance as the carols would be familiar to a number of people. They remain some of the few carols with which Australians would identify as being typically Christmas time in Australia with the mention of weather and nature at that time of the year.1Five Australian Christmas Carols with words by John Wheeler and music by William G James contains five Australian carols, The Three drovers, The Silver stars are in the Sky, Christmas Day, Carol of the Birds, Christmas Bush For His Adorning. 12 Pages. S Goldstraw handwritten on front cover.john wheeler, william james, australian christmas carols, warrnambool -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Postcard, 1920 c
Also another black and white postcard of North Arm Lakes Entrance showing a large bight 05278.1Black and white postcard showing calm waterway betweem steep banks at the entrance to the North Arm Lakes Entrance VictoriaBackwater Cunninghame S Vogt Photoaboriginals -
Bendigo Historical Society Inc.
Photograph - PHOTOCOPY OF JAMES MADDEN IN UNIFORM
Photocopy of James Madden in uniform resting his right arm on a ledge and his right leg hooked behind his left leg. James is wearing a red shirt, with gold buttons and braid, dark navy pants with white sash from left to right, belt and gloves. James also has his sheathed sword being held in the crook of his left arm. His right boot indicates that he is wearing spurs.13 page typewritten letter written whilst aboard the SS. Orion on the Mediterranean Sea , 28 march 1938. The letter gives details of the sights and goods able to be purchased in the area. Small letter envelope with the name of Harcourt Granite Quarries J. Blight and Co., Proprietors, if not claimed within ten days to be returned to the Manager, printed in the bottom left corner.S. T. King Williamson Sandhurst.military, world war 2, james madden -
Bendigo Historical Society Inc.
Document - MYER CHRONOLOGY 1901 TO 1981
2 x copies of Myer Chronology 1901-1981- stapled White , quality ) pages x 7 beginning with Elcon Baevski Myer giving the history and surrounding events of Myer storesHistorian Jean S. Carter 1981document, myer stores / elcon baevski myer -
Ballarat Tramway Museum
Newspaper, The Courier Ballarat, "Down the Tracks", Jan. 1997
Newspaper cuttings from The Courier, Ballarat, "Down the Tracks" column with notes Mr. Maurie Calnin JP. Mr Calnin was the President of the BTPS in the early 1970's. The item records Mr. Calnin's days as a Victorian Railway's North Ballarat Railway Workshop employee, a JP and a Magistrate on the Children's Court. 1735.1 - Ballarat Courier, p30, 24/1/1997 - 118H x 79W 1735.2 - Ballarat Courier, p26. 31/1/1997 - 190H x 96W1735.1 - in black ink 4 "*"'s on the top edge, "Courier p30 24/1/1997" and "former BTPS President" 1735.2 - in black ink "p26 Courier 31/1/1997"btps, magistrate, north ballarat workshops -
Federation University Historical Collection
Photograph, Bill Durant, Ballarat Institute of Advanced Education Physics Building, 02/1974
The physics building was one of the early buildings built on Mt Helen campusColour transparency of Mt Helen Campus S Building under constructionbuildings, physics, bill durant -
Flagstaff Hill Maritime Museum and Village
Book, In The Wake
In The Wake Author: Captain Gerald S Doorly Publisher: Robertson & MullensLabel on spine cover with typed text RH 910.45 DOO Pastedown front endpaper has sticker from Warrnambool Public Librarywarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, great ocean road, book, warrnambool library, warrnambool mechanics’ institute, mechanics’ institute library, victorian library board, warrnambool books and records, warrnambool children’s library, warrnambool public library, in the wake, captain gerald s doorly -
Flagstaff Hill Maritime Museum and Village
Chest
Chest wooden with hinged lid 1840's newspapers pasted insideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Bendigo Military Museum
Badge - VICKERS BADGES, 1914-1919
Items were in the collection relating to Carl Ernest Moller No 1242 AIF, DOW’s. Refer Cat No 1803.4 for his service details. The badges were worn on the sleeve of a uniform to denote that you had passed a Vickers machine Gun course..1)& .2) Brass badge s, crossed Vickers machine guns.numismatics-badges, military, metalcraft, vickers